Reactions of silver thiolates with bidentate phosphanes

Silver(I) Octanuclear Complexes Containing N'-(4-Oxotiazolidin-2-Iliden)picolinohydrazonamide and Nitrate as Bridge Ligands. An Example of Solvatomorphism?

The versatile coordination chemistry of (2Z,N'E)-N'-(4-oxothiazolidin-2-ylidene)picolinohydrazonamide (HAmDHotaz) facilitated the synthesis of new complexes with different silver(I) salts. This paper describes the synthesis and characterization, through elemental analysis and spectroscopic techniques (when solubility permits), of a series of compounds that illustrate the coordinative and structural diversity achievable with the HAmDHotaz ligand. Five silver clusters containing the [Ag8(AmDHotaz)4]4+ nucleus were structurally analyzed by single-crystal X-ray diffraction and were found to exhibit solvomorphism. The compositions of these are [Ag8(AmDHotaz)4(NO3)3(MeOH)(H2O)](NO3)·MeOH·7.5H2O (1), {[Ag8(AmDHotaz)4(NO3)3(H2O)2](NO3)·9.5(H2O)}n (2), {[Ag8(AmDHotaz)4(NO3)3(H2O)2](NO3)·11.5(H2O)}n (2a), {[Ag8(AmDHotaz)4(NO3)2(H2O)2](NO3)(OH)·6H2O}n (3), and {[Ag8(AmDHotaz)4(NO3)2(H2O)](NO3)(OH)·4.5H2O}n (3a). Argentophilic interactions are present in each of the octanuclear structures, where Ag···Ag distances range from 2.828(2) to 2.986(1) Å. These distances are influenced by crystal packing, determined by the counterion and solvent molecules in the structure. In the solvatomorphs, solvent molecules were observed to be disordered. Various hydrogen-bonding interactions, such as N-H···O-N, O-H···O, N-H···O═C, C-H···O-N, and π-π stacking interactions, contribute to the crystal packing. The influence of these weak interactions on the crystal packing was further analyzed using DFT calculations and Bader's theory of atoms-in-molecules, with a focus on argentophilic interactions and Ag···S interactions.

From Short-Bite Ligand Assembled Ribbons to Nanosized Networks in Cu(I) Coordination Polymers Built Upon Bis(benzylthio)alkanes (BzS(CH2)nSBz; n = 1-9)

With the objective to establish a correlation between the spacer distance and halide dependence on the structural features of coordination polymers (CPs) assembled by the reaction between CuX salts (X = Cl, Br, I) and dithioether ligands BzS(CH₂)_nSBz (n = 1-9; Bz = benzyl), a series of 26 compounds have been prepared and structurally investigated. A particular attention has been devoted to the design of networks with extremely long and flexible methylene spacer units between the SBz donor sites. Under identical conditions, CuI and CuBr react with BzSCH₂Bz (L1) affording respectively the one-dimensional (1D) CPs {Cu(μ₂-I)₂Cu}(μ-L1)₂]_n (CP1) and {Cu(μ₂-Br)₂Cu}(μ-L1)₂] (CP2), which incorporate Cu(μ₂-X)₂Cu rhomboids as secondary building units (SBUs). The hitherto unknown architecture of two-dimensional (2D) layers obtained with CuCl (CP3) differs from that of CP1 and CP2, which bear inorganic -Cl-Cu-Cl-Cu-Cl- chains interconnected through bridging L1 ligands, thus forming a 2D architecture. The crystallographic characterization of a 1D CP obtained by reacting CuI with 1,3-bis(benzylthio)propane (L2) reveals that [{Cu(μ₂-I)₂Cu}(μ-L2)₂]_n (CP4) contains conventional Cu₂I₂ rhomboids as SBUs. In contrast, unusual isostructural CPs [{Cu(μ₂-X)}(μ₂-L2)]_n (CP5) and (CP6) are obtained with CuX when X = Br and Cl, respectively, in which the isolated Cu atoms are bridged by a single μ₂-Br or μ₂-Cl ion giving rise to infinite [Cu(μ₂-X)Cu]_n ribbons. The crystal structure of the strongly luminescent three-dimensional (3D) polymer [{Cu₄(μ₃-I)₃(μ₄-I)(μ-L3)_1.5]_n (CP7) issued from reacting 2 equiv of CuI with BzS(CH₂)₄SBz (L3) has been redetermined. CP7 features unusual [(Cu₄I₃)(μ₄-I)]_n arrays securing the 3D connectivity. In contrast, mixing CuI with an excess of L3 provides the nonemissive material [{Cu(μ₂-I)₂Cu}(μ-L3)₂]_n (CP8). Treatment of CuBr and CuCl with L3 leads to [{Cu(μ₂-Br)₂Cu}(μ-L3)₂]_n (CP9) and the 0D complex [{Cu(μ₂-Cl)₂Cu}(μ-L3)₂] (D1), respectively. The crystallographic particularity for CP9 is the coexistence of two topological isomers within the unit cell. The first one, CP9-1D, consists of simple 1D ribbons running along the a axis of the unit cell. The second topological isomer, CP9-2D, also consists of [Cu(μ₂-Br)₂Cu] SBUs, but these are interconnected in a 2D manner forming 2D sheets placed perpendicular to the 1D ribbons. Four 2D CPs, namely, [{Cu₄(μ₃-I)₄}(μ-L4)₂]_n (CP10), [{Cu(μ₂-I)₂Cu}(μ-L4)₂]_n (CP11), [{Cu(μ₂-Br)₂Cu}(μ-L4)₂]_n (CP12), and [{Cu(μ₂-Cl)₂Cu}(μ-L4)₂]_n (CP13), stem from the self-assembly process of CuX with BzS(CH₂)₆SBz (L4). A similar series of 2D materials comprising [{Cu₄(μ₃-I)₄}(μ-L5)₂]_n (CP14), [{Cu(μ₂-I)₂Cu}(μ-L5)₂]_n (CP15), [{Cu(μ₂-Br)₂Cu}(μ-L5)₂]_n (CP16), and [{Cu(μ₂-Cl)₂Cu}(μ-L5)₂]_n (CP17) result from the coordination of BzS(CH₂)₇SBz (L5) on CuX. Ligation of CuX with the long-chain ligand BzS(CH₂)₈SBz (L6) allows for the X-ray characterization of the luminescent 2D [{Cu₄(μ₃-I)₄}(μ-L6)₂]_n (CP18) and the isostructural 1D series [{Cu(μ₂-X)₂Cu}(μ-L6)₂]_n CP19 (X = I), CP20 (X = Br) and CP21(X = Cl). Noteworthy, BzS(CH₂)₉SBz (L7) bearing a very flexible nine-atom chain generated the crystalline materials 2D [{Cu₄(μ₃-I)₄}(μ-L7)₂]_n (CP22) and the isostructural 1D series [{Cu(μ₂-X)₂Cu}(μ-L6)₂]_n CP23 (X = I), CP24 (X = Br), and CP25 (X = Cl), featuring nanometric separations between the cubane- or rhomboid-SBUs. This comparative study reveals that the outcome of the reaction of CuX with the shorter ligands BzS(CH₂)_nSBz (n = 1-4) is not predictable. However, with more flexible spacer chains BzS(CH₂)_nSBz (n = 6-9), a clear structural pattern can be established. Using a 1:1 CuX-to-ligand ratio, [{Cu(μ₂-X)₂Cu}(μ-L4-7)₂] CPs are always formed, irrespectively of L4-L7. Employing a 2:1 CuX-to-ligand ratio, only CuI is able to form networks incorporating Cu₄(μ₃-I)₄ clusters as SBUs. All attempts to construct polynuclear cluster using CuBr and CuCl failed. The materials have been furthermore analyzed by powder X-ray diffraction, Raman spectroscopy, and thermogravimetric analysis, and the photophysical properties of the emissive materials have been studied.

Silver(i) complexes with 1'-(diphenylphosphino)-1-cyanoferrocene: the art of improvisation in coordination

1'-(Diphenylphosphino)-1-cyanoferrocene () reacts with silver(i) halides at a 1 : 1 metal-to-ligand ratio to afford the heterocubane complexes [Ag(μ3-X)(-κP)]4, where X = Cl (), Br (), and I (). In addition, the reaction with AgCl with 2 equiv. of leads to chloride-bridged dimer [(μ-Cl)2{Ag(-κP)2}2] () and, presumably, also to [(μ(P,N)-){AgCl(-κP)}]2 (). While similar reactions with AgCN furnished only the insoluble coordination polymer [(-κP)2Ag(NC)Ag(CN)]n (), those with AgSCN afforded the heterocubane [Ag(-κP)(μ-SCN-S,S,N)]4 () and the thiocyanato-bridged disilver(i) complex [Ag(-κP)2(μ-SCN-S,N)]2 (), thereby resembling reactions in the AgCl- system. Attempted reactions with AgF led to ill-defined products, among which [Ag(-κP)2(μ-HF2)]2 () and [(μ-SiF6){Ag(-κP)2}2] () could be identified. The latter compound was prepared also from Ag2[SiF6] and . Reactions between and AgClO4 or Ag[BF4] afforded disilver complexes [(μ(P,N)-)Ag(ClO4-κO)]2 () and [(μ(P,N)-)Ag(BF4-κF)]2 () featuring pseudolinear Ag(i) centers that are weakly coordinated by the counter anions. A similar reaction with Ag[SbF6] followed by crystallization from ethyl acetate produced an analogous complex, albeit with coordinated solvent, [(μ(P,N)-)Ag(AcOEt-κO)]2[SbF6]2 (). Ultimately, a compound devoid of any additional ligands at the Ag(i) centers, [(μ(P,N)-)Ag]2[B(C6H3(CF3)2-3,5)4]2 (), was obtained from the reaction of with silver(i) tetrakis[3,5-bis(trifluoromethyl)phenyl]borate. The reaction of Ag[BF4] with two equivalents of produced unique coordination polymer [Ag(-κP)(μ(P,N)-)]n[BF4]n (), the structure of which contained one of the phosphinoferrocene ligands coordinated as a P,N-chelate and the other forming a bridge to an adjacent Ag(i) center. All of these compounds were structurally characterized by single-crystal X-ray crystallography, revealing that the lengths of the bonds between silver and its anionic ligand(s) typically exceed the sum of the respective covalent radii, which is in line with the results of theoretical calculations at the density-functional theory (DFT) level, suggesting that standard covalent dative bonds are formed between silver and phosphorus (soft acid/soft base interactions) while the interactions between silver and the ligand's nitrile group (if coordinated) or the supporting anion are of predominantly electrostatic nature.

Formation and Structural Diversity of Organo-Functionalized Tin-Silver Selenide Clusters

When reacting the organic functionalized tin selenide clusters [(SnR¹ )₃ Se₄ Cl] (A, R¹ =CMe₂ CH₂ C(O)Me) or [(SnR¹ )₄ Se₆ ] (B) with (SiMe₃ )₂ Se and [Ag(PPh₃ )₃ Cl] at -78 °C in CH₂ Cl₂ , a microcrystalline intermediate (compound 1) precipitates, which was investigated by magic angle spinning (MAS) NMR spectroscopy, powder X-ray diffraction (PXRD), energy dispersive X-ray (EDX) spectroscopy, and quantum chemistry calculations, to derive information about its composition and structure. Compound 1 re-dissolves under reorganization into the organo-functionalized Ag/Sn/Se cluster compound [Ag₆ (μ₆ -Se)(Ag₈ Se₁₂ ){(R¹ Sn)₂ Se₂ }₆ ] (2), or the mixed-valence cluster [(AgPPh₃ )₂ (Sn^II Cl)₂ Se₂ {(R¹ Sn^IV )₂ Se₂ }₂ ] (3), depending on the presence or the exclusion of daylight, respectively. The addition of N₂ H₄ ⋅H₂ O to a solution of 1 yields selectively [Ag₇ (μ₇ -Se)(Ag₇ Se₁₂ ){(R² Sn)₂ Se₂ }₆ ] (4, R² =CMe₂ CH₂ C(N₂ H₂ )Me), the Ag/Sn/Se core of which is isomeric to that of 2. 2-4 were characterized by X-ray diffraction. NMR spectroscopic studies on solutions of 1 indicate the co-existence of different species.

Silver complexes stabilized by large silanethiolate ligands - crystal structures and luminescence properties

Bulky silanethiolate and disiladithiolate ligands were applied to synthesize one mononuclear and three trinuclear silver complexes including two cyclic "microclusters" and a linear tri-nuclear silanethiolate complex. All obtained compounds are characterized by X-ray diffraction and FT-IR. NMR and emission spectroscopies were used where possible. The first trinuclear anionic silver thiolate is structurally characterized. The influence of the different charge of cyclic silver complexes as well as the overall ligand environment on the structural properties is demonstrated. The impact of the different synthetic routes on the final structures of the obtained clusters - cyclic or linear - is discussed.

[Ag115S34(SCH2C6H4t Bu)47(dpph)6]: synthesis, crystal structure and NMR investigations of a soluble silver chalcogenide nanocluster

With the aim to synthesize soluble cluster molecules, the silver salt of (4-(tert-butyl)phenyl)methanethiol [AgSCH2C6H4t Bu] was applied as a suitable precursor for the formation of a nanoscale silver sulfide cluster. In the presence of 1,6-(diphenylphosphino)hexane (dpph), the 115 nuclear silver cluster [Ag115S34(SCH2C6H4t Bu)47(dpph)6] was obtained. The molecular structure of this compound was elucidated by single crystal X-ray analysis and fully characterized by spectroscopic techniques. In contrast to most of the previously published cluster compounds with more than a hundred heavy atoms, this nanoscale inorganic molecule is soluble in organic solvents, which allowed a comprehensive investigation in solution by UV-Vis spectroscopy and one- and two-dimensional NMR spectroscopy including 31P/109Ag-HSQC and DOSY experiments. These are the first heteronuclear NMR investigations on coinage metal chalcogenides. They give some first insight into the behavior of nanoscale silver sulfide clusters in solution. Additionally, molecular weight determinations were performed by 2D analytical ultracentrifugation and HR-TEM investigations confirm the presence of size-homogeneous nanoparticles present in solution.

Synthesis and molecular structure of a spheroidal binary nanoscale copper sulfide cluster

The reaction of copper (4-(tert-butyl)phenyl)methanethiolate with S(SiMe₃)₂ in the presence of triphenylphosphine yields to the formation of the 52 nuclear copper cluster [Cu₅₂S₁₂(SCH₂C₆H₄^tBu)₂₈(PPh₃)₈]. The molecular structure of this intensely red coloured nanoscale Cu₂S mimic was established by single crystal X-ray diffraction.