A selective fluorescent probe for relay recognition of Al3+ and Cu2+ through fluorescence “off-on-off” functionality

Colorimetric and Fluorometric N-Acylhydrazone-based Chemosensors for Detection of Single to Multiple Metal Ions: Design Strategies and Analytical Applications

The development of optical sensors for metal ions has gained significant attention due to their broad applications in biology, the environment, and medicine. Colorimetric and fluorometric detection methods are particularly valued for their simplicity, cost-effectiveness, high detection limits, and analytical power. Among various chemical probes, the hydrazone functional group stands out for its extensive study and utility, owing to its ease of synthesis and adaptability. This review provides a comprehensive overview of N-acylhydrazone-based probes, serving as highly effective colorimetric and fluorometric chemosensors for a diverse range of metal ions. Probes are categorized into single-ion, dual-ion, and multi-ion chemosensors, each further classified based on the detected metal(s). Additionally, the review discusses detection modes, detection limits, association constants, and spectroscopic measurements.

A novel water-soluble flavonol-based fluorescent probe for highly specific and sensitive detection of Al3+ and its application in onion and zebrafish

A novel and simple turn-on fluorescence probe (HD) for Al³⁺ detection was successfully developed based on flavonol derivatives. This probe exhibited a significantly enhanced fluorescence response toward Al³⁺ in aqueous solution which could be observed by naked-eye from poor fluorescence to strong light green emission. The probe HD displays highly specific detection for Al³⁺ over other competitive metal ions, and the detection limit of probe HD for Al³⁺ was determined to be 2.57 × 10^-8 M, which are much lower than the World Health Organization (WHO) guideline value for drinking food/water. The binding stoichiometry of probe HD with Al³⁺ was determined to be 1:1 according to Job's plot and ESI-HRMS analysis, and the binding constant was calculated to be 2.01 × 10⁴ M^-1. The probe HD exhibited high selectivity, high sensitivity, good anti-interface ability, and wide pH application range as well as the quantitative determination in the detection of Al³⁺. The coordination mechanism of probe HD with Al³⁺ was supported by density functional theory (DFT) calculations and HRMS analysis. In addition, the probe HD was found to have good cell permeability and could be applied for live-cell imaging to detect Al³⁺ in onions and zebrafish.

A water-soluble molecular probe with aggregation-induced emission for discriminative detection of Al3+ and Pb2+ and imaging in seedling root of Arabidopsis

Luminogens with aggregation-induced emission (AIE) have been used to develop a new type of molecular probes based on analyte-triggered aggregation, but it still remains a challenge to design water-soluble AIE-active probe for specific detection of metal ions. Herein, we designed and synthesized a water-soluble molecular probe with AIE property for discriminative detection of aluminum ion and lead ion. Four carboxylic acid groups were incorporated into a tetraphenylethylene unit to enhance the coordination affinity and increase water-solubility in aqueous solution. The designed probe can be selectively lighted up by aluminum ion and lead ion via coordination-triggered AIE process. Discrimination of aluminum ion and lead ions based on the probe can be achieved in quantitative manner with the assistance of suitable masking reagents. This probe was further used to image aluminum ions in living cells of seedling roots of Arabidopsis, and the results showed that this probe is capable of imaging aluminum ions in living cells avoiding the interference of lead ions, and is suited for long-term imaging due to its excellent photostability. This work expands the application scope of AIE-active probes in discriminative detection of metal ions, and provides a design direction for water-soluble AIE probes to avoid the false signals from self-precipitation under physiological conditions.

A Naphthalimide-Based Fluorescence "Off-on-Off" Chemosensor for Relay Detection of Al3+ and ClO. Front Chem 2019;7:549. [PMID: 31428604 PMCID: PMC6687763 DOI: 10.3389/fchem.2019.00549]

A novel Al³⁺ chemosensor NPA was designed and synthesized on basis of the mechanism of ICT and CHEF. Upon addition of Al³⁺, the probe NPA displayed a bright green fluorescence under UV radiation and visual color change from yellow to colorless. Spectrum titrations showed that NPA could be recognized as a fluorescent turn-on probe with 10^-8 M detection level. The probe was successfully applied in real water sample and test paper. More important, NPA-Al³⁺ complex were used as a fluorescent turn-off probe for the detection of ClO^- with the detection as low as 2.34 × 10^-8 M. The performance of NPA to Al³⁺ and NPA-Al³⁺ complex to ClO^- demonstrated that NPA could be served as a sensitive probe and exhibit INHIBIT logic gate behavior with Al³⁺ and ClO^- as inputs.

A novel OFF-ON-OFF fluorescence probe based on coumarin for Al3+ and F- detection and bioimaging in living cells

A novel fluorescence probe L2 based on coumarin has been designed and synthesized. The probe L2 can be used for relay recognition of metal ions Al³⁺ and anion F^- in the aqueous HEPES buffer (0.05 M, pH = 7.4), and build a OFF-ON-OFF detection system. The probe showed high selectivity and sensitivity to target ions in the process of relay recognition, and the corresponding detection limit could be as low as 0.014 μM (Al³⁺) and 0.03 μM (F^-). Besides, the geometry optimizations of probe L2 and [L2 + Al³⁺] complex were carried out using the Gaussian 16 program based on DFT, and the identification mechanism of the probe was also discussed by the mass spectrometry and theoretical calculations. Moreover, the probe has also been successfully applied to detection of target ions in living cells.

Design, properties and application of a facile fluorescence switch for Cu(II)

A facile fluorescence switch based on Schiff base 2,2'-[1,3-phenylenbis- (methylidynenitrilo)]bis[benzenethiol] (PMBB) has been developed and used to sensing metal ions. UV-vis absorption and fluorescence emission spectra show that the PMBB receptor has high selectivity and sensitivity for Cu(II) ions. Based on the photoinduced electron transfer (PET) and chelation enhanced fluorescence (CHEF) mechanisms, the receptor exhibits an fluorescence "turn-on" switch signal for Cu(II). The 1:1 binding mode of PMBB and Cu (II) ions can be obtained by the Job-plot and ESI-Mass spectra data. Noticeably, the color changes (from colorless to yellow) of PMBB solutions for Cu(II) sensing can be observed by naked eyes in the sunlight. The detection limit of the receptor for Cu(II) may reach 10(-7)mol/L with a good linear relation in the lower concentrations of Cu(II). To develop the practical application, the Cu(II) ions in swimming pool water samples were detected. Results show that PMBB receptor as a fluorescent probe can use to detect the trace level of Cu(II) in the environmental samples. This work contributes to providing a facile strategy for designing efficient probes and developing their practical application value.

A Novel Fluorimetric Bulk Optode Membrane Based on NOS Tridentate Schiff Base for Selective Optical Sensing of Al3+ Ions

A novel fluorimetric optode has been developed for the highly selective and sensitive for the determination of ultra trace amounts of Al³⁺ ions. The proposed fluorescent optode is based on the incorporation of a simple and effective fluorescent sensor tridentate NOS Schiff base N-(2-hydroxynaphthylidene)-2-aminothiophenol (H₂L) in a plasticized PVC containing KTpClPB as a lipophilic anionic additive. H₂L was synthesized by a facile one-step Schiff base reaction. The plasticized PVC-membrane displays a calibration response for Al³⁺ ions over a wide concentration range from 1.0 × 10^-9 to 4.4 × 10^-3 mol/L. The fluorescence signal of the optode membrane can be easily recovered by immersion in 0.01 M EDTA. In addition to high stability and reproducibility, the sensor shows a unique selectivity towards Al³⁺ ion with respect to common co-existing cations, particularly Ga³⁺and In³⁺. The proposed optode was applied successfully for determination of Al³⁺ in some real samples, including bottled drinking waters, bottled mineral waters and soft drinks.

A review of mechanisms for fluorescent ‘‘turn-on’’ probes to detect Al3+ ions

The adverse effect of Al³⁺ ions on human health as well as the environment makes it desirable to develop sensitive and specific techniques for the detection of Al³⁺ ions.