Influence of the counterion on the geometry of Cu(I) and Cu(II) complexes with 1,10-phenanthroline

Synapse-Mimicking Memristors Based on 3,6-Di(tpy)-9-Phenylcarbazole Unimer and Its Copolymer with Cobalt(II) Ions

The title compound, unimer U (tpy stands for 2,2':6',2″-terpyridin-4'-yl end-group), by itself shows the memristor effect with a retention time of 18 h and persistence of 11 h. Its coordination copolymer with Co(II) ions, [CoU]n, exhibits multimodal resistance changes similar to the synaptic responses observed in biological systems. More than 320 cycles of potentiation and depression measured in continuous sequence occurred without observing a significant current change, confirming the operational stability and reproducibility of the device based on the [CoU]n polymer. The synaptic effect of a device with an indium tin oxide (ITO)/[CoU]n/top-electrode (TE) configuration is more pronounced for the device with TE = Au compared to devices with TE = Al or Ga. However, the latter TEs provide a cost-effective approach without any significant compromise in device plasticity. The detected changes in the synaptic weight, about 12% for pair-pulse facilitation and 80% for its depression, together with a millisecond trigger and reading pulses that decay exponentially on the time scale typical of neurosynapses, justify the device's ability to learn and memorize. These properties offer potential applications in neuromorphic computation and brain-inspired synaptic devices.

Charged Microdroplets as Microelectrochemical Cells for CO2 Reduction and C-C Coupling

Charged microdroplets offer novel electrochemical environments, distinct from traditional solid-liquid or solid-liquid-gas interfaces, due to the intense electric fields at liquid-gas interfaces. In this study, we propose that charged microdroplets serve as microelectrochemical cells (MECs), enabling unique electrochemical reactions at the gas-liquid interface. Using electrospray-generated microdroplets, we achieved multielectron CO2 reduction and C-C coupling to synthesize ethanol using molecular catalysts. These catalysts effectively harness and relay electrons, enhancing the longevity of solvated electrons and enabling multielectron reactions. Importantly, we revealed the intrinsic relationship between the size and charge density of a MEC and its reaction selectivity. Employing in situ mass spectrometry, we identified reaction intermediates (molecular catalyst adducts with HCOO) and oxidation products, elucidating the CO2 reduction mechanism and the comprehensive reaction procedure. Our research underscores the promising role of charged microdroplets in pioneering new electrochemical systems.

Antiproliferative and antibacterial properties of biocompatible copper(II) complexes bearing chelating N,N-heterocycle ligands and potential mechanisms of action

In an attempt to propose new applications for the biomedical field, complexes with mixed ligands {[Cu(bpy)₂(μ₂OClO₃)]ClO₄}n (1) and [Cu(phen)₂(OH₂)](ClO₄)₂ (2) (bpy: 2,2'-biyridine; phen and 1,10-phenantroline) were evaluated for their antibacterial and cytotoxicicity features and for the elucidation of some of the mechanisms involved. Complex (2) proved to be a very potent antibacterial agent, exhibing MIC and MBEC values 2 to 54 times lower than those obtained for complex (1) against both susceptible or resistant Gram-positive and Gram-negative strains, in planktonic or biofilm growth state. In exchange, complex (1) exhibited selective cytotoxicity against melanoma tumor cells (B16), proving a promising potential for developing novel anticancer drugs. The possible mechanisms of both antimicrobial and antitumor activity of the copper(II) complexes is their DNA intercalative ability coupled with ROS generation. The obtained results recommend the two complexes for further development as multipurpose copper-containing drugs.

Structure and excited-state dynamics of dimeric copper(i) photosensitizers investigated by time-resolved X-ray and optical transient absorption spectroscopy

Time-resolved X-ray (tr-XAS) and optical transient absorption (OTA) spectroscopy in the picosecond time scale coupled with Density Functional theory (DFT) and X-ray absorption near-edge structure (XANES) calculations are applied to study three homoleptic Cu(i) dimeric chromophores with ethyl and longer propyl spacers, denoted as [Cu₂(mphenet)₂]Cl₂ (C1), [Cu₂(mphenet)₂](ClO₄)₂ (C2) and [Cu₂(mphenpr)₂](ClO₄)₂ (C3) (where mphenet = 1,2-bis(9-methyl-1,10-phenanthrolin-2-yl)ethane and mphenpr = 1,3-bis(9-methyl-1,10-phenanthrolin-2-yl)propane). Tr-XAS analysis after light illumination at ∼ 100 ps illustrate the formation of a flattened triplet excited state in all 3 complexes. Optical transient absorption (OTA) analysis for C1 monitored in water and C2 and C3 measured in acetonitrile reveals distinct excited-state lifetimes of 169 ps, 670 ps and 1600 ps respectively. These differences are associated to changes in the solvent (comparing C1 and C2) and the flexibility of the ligand to adapt after Cu flattening upon excitation (C2 and C3). Our results are important for the improved structural dynamics of these types of Cu-based dimeric compounds, and can guide the integration of these chromophores into more complex solar energy conversion schemes.

Influence of the Increasing Number of Organic Radicals on the Structural, Magnetic, and Electrochemical Properties of the Copper(II)-Dioxothiadiazole Family of Complexes

The preparation, structures, and electrochemical and magnetic properties supported by density functional theory (DFT) calculations of three new copper(II) compounds with [1,2,5]thiadiazolo[3,4-f][1,10]phenanthroline 1,1-dioxide (td) and its radical anion (td·-) are reported: {[CuIICl(td)](μ-Cl)2[CuIICl(td)]} (1), which incorporates only neutral td ligands; [CuIICl(td·-)(td)]·2MeCN (2), which comprises one neutral td and one radical td·-; and PPN[CuIICl(td·-)2]·2DMA (3), where CuII ions are coordinated by two radical anions td·- (DMA, dimethylacetamide; PPN+, the bis(triphenylphosphine)iminium cation). All three compounds show interesting paramagnetic behavior with low-temperature features indicating significant antiferromagnetic coupling. The magnetic properties of 1 are dominated by CuII···CuII interactions (JCuCu) mediated through the Cl- bridges, while the magnetic properties of 2 and 3 are governed mainly by the td·-···td·- (Jtdtd) and CuII-td·- (JCutd) exchange interactions. The structure of 2 features only two major magnetic coupling pathways enabling the fitting of experimental data with Jtdtd = -36.0(5) cm-1 and JCutd = -12.6(2) cm-1 only. Compound 3 exhibits a complex network of magnetic contacts. Attempt to approximate its magnetic behavior using only a local magnetic contacts model resulted in Jtdtd = -5.6(1) cm-1 and two JCutd constants, -12.4(2) and -22.6(4) cm-1. The experimental fitting is critically compared with the results of broken symmetry density functional theory (BS DFT) calculations for inter- and intramolecular contacts. More consistent results were obtained with the M06 functional as opposed to popular B3LYP, which encountered problems reproducing some of the experimental intermolecular exchange interactions. Electrochemical measurements of 2 and 3 in MeCN showed three reversible nearly overlapping redox peaks appearing in a narrow potential range of -600 to -100 mV vs Fc/Fc+. Small differences between the redox events suggest that such compounds may be good candidates for new switchable materials, where the electron transfer between the metal and the ligand center is triggered by temperature, pressure, or light (valence tautomerism).

Cu(I) Coordination Complex Precursor for Randomized CuOx Microarray Loaded on Carbon Nanofiber with Excellent Electrocatalytic Performance for Electrochemical Glucose Detection

A homoleptic ionic Cu(I) coordination complex that was based on 2,2′-biquinoline ligand functionalized with long alkyl chains (Cu(I)–C18) was used as a precursor to modify a carbon nanofiber paste electrode (Cu–C18/CNF). Randomized copper oxide microelectrode arrays dispersed within carbon nanofiber paste (CuO_x/CNF) were obtained by electrochemical treatment of Cu–C18/CNF while using cyclic voltammetry (CV). The CuO_x/CNF exhibited high electrocatalytic activity towards glucose oxidation at +0.6 V and +1.2 V vs. Ag/AgCl. Infrared Spectroscopy (FTIR) and scanning electron microscopy (SEM) characterized the electrodes composition. Cyclic voltammetry (CV), square wave-voltammetry (SWV), and multiple-pulsed amperometry (MPA) techniques provided optimized conditions for glucose oxidation and detection. A preconcentration step that involved 10 minutes accumulation at open circuit potential before SWV running led to the lowest limit of detection and the highest sensitivity for glucose detection (5419.77 µA·mM⁻¹·cm⁻² at + 1.1 V vs. Ag/AgCl) vs. Cu-based electrodes reported to date in literature.