Multiple sets of arsenic resistance genes are present within highly arsenic-resistant industrial strains of the biomining bacterium, Acidithiobacillus caldus

RNA transcript response by an Acidithiobacillus spp. mixed culture reveals adaptations to growth on arsenopyrite

Biooxidation of gold-bearing refractory mineral ores such as arsenopyrite (FeAsS) in stirred tanks produces solutions containing highly toxic arsenic concentrations. In this study, ferrous iron and inorganic sulfur-oxidizing Acidithiobacillus strain IBUN Ppt12 most similar to Acidithiobacillus ferrianus and inorganic sulfur compound oxidizing Acidithiobacillus sp. IBUNS3 were grown in co-culture during biooxidation of refractory FeAsS. Total RNA was extracted and sequenced from the planktonic cells to reveal genes with different transcript counts involved in the response to FeAsS containing medium. The co-culture's response to arsenic release during biooxidation included the ars operon genes that were independently regulated according to the arsenopyrite concentration. Additionally, increased mRNA transcript counts were identified for transmembrane ion transport proteins, stress response mechanisms, accumulation of inorganic polyphosphates, urea catabolic processes, and tryptophan biosynthesis. Acidithiobacillus spp. RNA transcripts also included those encoding the Rus and PetI proteins involved in ferrous iron oxidation and gene clusters annotated as encoding inorganic sulfur compound metabolism enzymes. Finally, mRNA counts of genes related to DNA methylation, management of oxidative stress, chemotaxis, and motility during biooxidation were decreased compared to cells growing without mineral. The results provide insights into the adaptation of Acidithiobacillus spp. to growth during biooxidation of arsenic-bearing sulfides.

Metal resistance in acidophilic microorganisms and its significance for biotechnologies

Extremely acidophilic microorganisms have an optimal pH of <3 and are found in all three domains of life. As metals are more soluble at acid pH, acidophiles are often challenged by very high metal concentrations. Acidophiles are metal-tolerant by both intrinsic, passive mechanisms as well as active systems. Passive mechanisms include an internal positive membrane potential that creates a chemiosmotic gradient against which metal cations must move, as well as the formation of metal sulfate complexes reducing the concentration of the free metal ion. Active systems include efflux proteins that pump metals out of the cytoplasm and conversion of the metal to a less toxic form. Acidophiles are exploited in a number of biotechnologies including biomining for sulfide mineral dissolution, biosulfidogenesis to produce sulfide that can selectively precipitate metals from process streams, treatment of acid mine drainage, and bioremediation of acidic metal-contaminated milieux. This review describes how acidophilic microorganisms tolerate extremely high metal concentrations in biotechnological processes and identifies areas of future work that hold promise for improving the efficiency of these applications.

Bioleaching of chalcopyrite concentrate by a moderately thermophilic culture in a stirred tank reactor

A mixed culture of moderately thermophilic microorganisms was enriched from acid mine drainage samples collected from several chalcopyrite mines in China. Such mixed culture can be used to effectively extract copper from chalcopyrite. Furthermore, after being adapted to gradually increased concentration of chalcopyrite concentrate, the tolerance of the mixed culture to chalcopyrite concentrate was brought up to 80 g/L. The effects of several leaching parameters on copper recovery in stirred tank reactor also had been investigated. The results of the investigation show that it was possible to achieve a copper extraction rate of 75% in 44 days at a pulp density of 8%. The leaching rate of chalcopyrite concentrate tended to increase with dissolved total iron concentration. At low pH ranges, more microscopic counts of microorganisms were found in the solution. Furthermore, the analysis of leached residues indicates that the passivation of chalcopyrite concentrate was mainly due to a mass of jarosite and PbSO(4) on the mineral surface, other than the elemental sulphur layer. The bacterial community composition was analyzed by using Amplified Ribosomal DNA Restriction Analysis. Two moderately thermophilic bacteria species were identified as Leptospirillum ferriphilum and Acidithiobacillus caldus with abundance of 67% and 33% in the bio-pulp, respectively.

Presence of a family of plasmids (29 to 65 kilobases) with a 26-kilobase common region in different strains of the sulfur-oxidizing bacterium Acidithiobacillus caldus

Three large cryptic plasmids from different isolates of Acidithiobacillus caldus were rescued by using an in vitro transposition system that delivers a kanamycin-selectable marker and an Escherichia coli plasmid origin of replication. The largest of the plasmids, the 65-kb plasmid pTcM1, was isolated from a South African A. caldus strain, MNG. This plasmid was sequenced and compared to that of pTcF1 (39 kb, from strain "f," South Africa) and pC-SH12 (29 kb, from strain C-SH12, Australia). With the exception of a 2.7-kb insertion sequence, pC-SH12 appears to represent the DNA common to all three plasmids and includes a number of accessory genes plus the plasmid "backbone" containing the replication region. The two larger plasmids carry, in addition, a number of insertion sequences of the ISL3 family and a composite transposon related to the Tn21 subfamily containing a highly mosaic region within the borders of the inverted repeats. Genes coding for arsenic resistance, plasmid mobilization, plasmid stability, and a putative restriction-modification system occur within these mosaic regions.

Cloning and characterization of the chromosomal arsenic resistance genes from Acidithiobacillus caldus and enhanced arsenic resistance on conjugal transfer of ars genes located on transposon TnAtcArs

All strains of the moderately thermophilic, acidophilic, sulphur-oxidizing bacterium Acidithiobacillus caldus that have been tested contain a set of chromosomal arsenic resistance genes. Highly arsenic-resistant strains isolated from commercial arsenopyrite bio-oxidation tanks contain additional transposon-located (TnAtcArs) arsenic resistance genes. The chromosomal At. caldus ars genes were cloned and found to consist of arsR and arsC genes transcribed in one direction, and arsB in the opposite direction. The arsRC genes were co-transcribed with ORF1, and arsB with ORF5 in both At. caldus and Escherichia coli, although deletion of ORFs 1 and 5 did not appear to affect resistance to arsenate or arsenite in E. coli. ORFs 1 and 5 have not previously been reported as part of the ars operons, and had high amino acid identity to hypothetical proteins from Polaromonas naphthalenivorus (76%) and Legionella pneumophila (60%), respectively. Reporter-gene studies showed that the arsenic operon of transposon origin (TnAtcArs) was expressed at a higher level, and was less tightly regulated in E. coli than were the At. caldus ars genes of chromosomal origin. Plasmid pSa-mediated conjugal transfer of TnAtcArs from E. coli to At. caldus strains lacking the transposon was successful, and resulted in greatly increased levels of resistance to arsenite.

Resistance determinants of a highly arsenic-resistant strain of Leptospirillum ferriphilum isolated from a commercial biooxidation tank

Two sets of arsenic resistance genes were isolated from the highly arsenic-resistant Leptospirillum ferriphilum Fairview strain. One set is located on a transposon, TnLfArs, and is related to the previously identified TnAtcArs from Acidithiobacillus caldus isolated from the same arsenopyrite biooxidation tank as L. ferriphilum. TnLfArs conferred resistance to arsenite and arsenate and was transpositionally active in Escherichia coli. TnLfArs and TnAtcArs were sufficiently different for them not to have been transferred from one type of bacterium to the other in the biooxidation tank. The second set of arsenic resistance genes conferred very low levels of resistance in E. coli and appeared to be poorly expressed in both L. ferriphilum and E. coli.

An unusual Tn21-like transposon containing an ars operon is present in highly arsenic-resistant strains of the biomining bacterium Acidithiobacillus caldus

A transposon, TnAtcArs, that carries a set of arsenic-resistance genes was isolated from a strain of the moderately thermophilic, sulfur-oxidizing, biomining bacterium Acidithiobacillus caldus. This strain originated from a commercial plant used for the bio-oxidation of gold-bearing arsenopyrite concentrates. Continuous selection for arsenic resistance over many years had made the bacterium resistant to high concentrations of arsenic. Sequence analysis indicated that TnAtcArs is 12 444 bp in length and has 40 bp terminal inverted repeat sequences and divergently transcribed resolvase and transposase genes that are related to the Tn21-transposon subfamily. A series of genes consisting of arsR, two tandem copies of arsA and arsD, two ORFs (7 and 8) and arsB is situated between the resolvase and transposase genes. Although some commercial strains of At. caldus contained the arsDA duplication, when transformed into Escherichia coli, the arsDA duplication was unstable and was frequently lost during cultivation or if a plasmid containing TnAtcArs was conjugated into a recipient strain. TnAtcArs conferred resistance to arsenite and arsenate upon E. coli cells. Deletion of one copy of arsDA had no noticeable effect on resistance to arsenite or arsenate in E. coli. ORFs 7 and 8 had clear sequence similarity to an NADH oxidase and a CBS-domain-containing protein, respectively, but their deletion did not affect resistance to arsenite or arsenate in E. coli. TnAtcArs was actively transposed in E. coli, but no increase in transposition frequency in the presence of arsenic was detected. Northern hybridization and reporter gene studies indicated that although ArsR regulated the 10 kb operon containing the arsenic-resistance genes in response to arsenic, ArsR had no effect on the regulation of genes associated with transposition activity.

Characteristics and adaptability of iron- and sulfur-oxidizing microorganisms used for the recovery of metals from minerals and their concentrates

Microorganisms are used in large-scale heap or tank aeration processes for the commercial extraction of a variety of metals from their ores or concentrates. These include copper, cobalt, gold and, in the past, uranium. The metal solubilization processes are considered to be largely chemical with the microorganisms providing the chemicals and the space (exopolysaccharide layer) where the mineral dissolution reactions occur. Temperatures at which these processes are carried out can vary from ambient to 80 degrees C and the types of organisms present depends to a large extent on the process temperature used. Irrespective of the operation temperature, biomining microbes have several characteristics in common. One shared characteristic is their ability to produce the ferric iron and sulfuric acid required to degrade the mineral and facilitate metal recovery. Other characteristics are their ability to grow autotrophically, their acid-tolerance and their inherent metal resistance or ability to acquire metal resistance. Although the microorganisms that drive the process have the above properties in common, biomining microbes usually occur in consortia in which cross-feeding may occur such that a combination of microbes including some with heterotrophic tendencies may contribute to the efficiency of the process. The remarkable adaptability of these organisms is assisted by several of the processes being continuous-flow systems that enable the continual selection of microorganisms that are more efficient at mineral degradation. Adaptability is also assisted by the processes being open and non-sterile thereby permitting new organisms to enter. This openness allows for the possibility of new genes that improve cell fitness to be selected from the horizontal gene pool. Characteristics that biomining microorganisms have in common and examples of their remarkable adaptability are described.