Application of ruthenium red and colloidal gold-labeled lectin for the visualization of bacterial exopolysaccharides in Cheddar cheese matrix using transmission electron microscopy

Observation of exopolysaccharides (EPS) from Lactobacillus helveticus SBT2171 using the Tokuyasu method

Some species of lactic acid bacteria used for the production of natural cheese produce exopolysaccharides (EPS). Electron microscopy is useful for analyzing the microstructure of EPS produced by lactic acid bacteria. However, pretreatments used to observe the microstructure of EPS by electron microscopy, such as dehydration and resin embedding, can result in EPS flowing out easily from the cell. Therefore, in this study, the Tokuyasu method was conducted on cryosection to reduce EPS outflow. Two types of observation method, namely, using lectin and ruthenium red, were conducted in an attempt to observe EPS produced by Lactobacillus helveticus SBT2171. Observation using the lectin method confirmed that colloidal gold particles conjugated with a lectin recognizing β-galactoside were present in the capsule. Structures that appeared to be β-galactoside-containing slime polysaccharides that were released from the cell wall were also observed. Observation using ruthenium red showed that capsular polysaccharides (CPS) in the capsule were present as a net-like structure. Colloidal gold conjugation with an anti-β-lactoglobulin antibody, in addition to ruthenium red staining, allowed the identification of slime polysaccharides released from the cell wall in the milk protein network derived from the culture medium. Based on these results, the Tokuyasu method was considered to be a useful pretreatment method to clarify and observe the presence of EPS. In particular, both CPS in the capsule and slime exopolysaccharides released from the cell wall were visualized.

Effects of natural deep eutectic solvents on lactic acid bacteria viability during cryopreservation

In this study, a new method of cryopreservation of lactic acid bacteria (LAB) using natural deep eutectic solvents (NADESs) was developed. Survival rates of LAB during 24-h short-term and 180-day long-term cryostorage at - 20 °C were investigated. The results revealed that survival of Streptococcus thermophilus (S. thermophilus) in NADESs after 24 h of cryostorage was superior to survival of two other tested LAB. Moreover, survival was higher at a ratio of NADESs to S. thermophilus of 1:1 (v/v) than observed using a 4:1 (v/v) ratio. Representative freezing characteristics of five NADESs were elucidated, including thermodynamic properties and hydrogen bonding interactions after addition of water. In order to identify the protective mechanism of NADESs on cell structure and vital metabolic enzymes of S. thermophilus during cryostorage, transmission electron microscopy (TEM) and sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) were employed and enzyme activities of both lactate dehydrogenase (LDH) and β-galactosidase were determined. Subsequently, NADES GlyP prepared from glycerol and L-proline was demonstrated to maintain cell membrane structural integrity and significantly (p < 0.05) maintain activities of both intracellular enzymes of S. thermophilus. Moreover, NADESs could efficiently penetrate S. thermophilus cells and intracellular β-galactosidase activity could be used to demonstrate NADESs effectiveness in maintaining S. thermophilus survival after long-term cryostorage. These results demonstrate that NADESs can be used as green cryoprotective chemical agents (CPAs) that can efficiently increase LAB viability during cryostorage. These results should have great value in the food production and probiotics industries.

A unique phenotypic modification of Lactococcus lactis cultivated in a Couette bioreactor

Batch cultures of Lactococcus lactis NCDO 2118 and IL 1403 were performed in a Couette bioreactor operated in the modulated wavy vortex flow and the turbulent regimes. This study provides an overall analysis taking into account both mechanical stress and mixing in a Couette bioreactor. A unique phenotypic aspect has been proved to occur only in the modulated wavy vortex flow regime for the two studied strains, namely that the cells become entrapped in a filamentous form. No change in the metabolic behavior of the cells has been observed. The polymeric matrix has been microscopically observed through FISH and fluorescent lectin binding, showing cells entrapped in a glycoconjugate matrix. All hypotheses regarding insufficient mixing as a cause of this phenotype have been discarded, leading to the conclusion that this particular phenotypic feature is essentially due a combined effect of mechanical stress and flow structure. Particle size measurement during the fermentation course indicates that formation of filamentous form results from a continuous aggregation started in the early stages of the cultivation. According to our results a minimum shear is required to induce the ability for cells to aggregate. Then, it appears that both flow structure and mechanical stress (shear) are responsible for the appearance of such a filamentous form. As far as the authors know, this is the first experimental evidence of a bio polymerization induced by the flow structure.

Detection and quantification of capsular exopolysaccharides from Streptococcus thermophilus using lectin probes

The aim of this work was to use fluorescently labeled lectins to develop a convenient and reliable method to determine the relative abundance of capsular polysaccharides (CPS) at the surface of Streptococcus thermophilus MR-1C cells. Fluorescein isothiocyanate-labeled peanut agglutinin isolated from Arachis hypogaea was found to interact specifically with the CPS of Strep. thermophilus MR-1C. This labeled lectin was then used as an effective probe to detect and quantify CPS. A fluorescence-based lectin-binding assay was successfully applied to follow the accumulation of CPS during the growth of Strep. thermophilus MR-1C in milk and in M17 broth supplemented with lactose. Our results showed that in both media, CPS production by Strep. thermophilus MR-1C began during the exponential phase of growth and continued for several hours after the culture reached the stationary growth phase.

Capsular exopolysaccharide biosynthesis gene of Propionibacterium freudenreichii subsp. shermanii

In the dairy industry, exopolysaccharides (EPS) contribute to improving the texture and viscosity of cheese and yoghurt and also receive increasing attention because of their beneficial properties for health. For lactic acid bacteria, the production of EPS is well studied. However, for dairy propionibacteria the biosynthesis of EPS is poorly documented. A polysaccharide synthase-encoding gene was identified in the genome of Propionibacterium freudenreichii subsp. shermanii TL 34 (CIP 103027). This gene best aligns with Tts, the polysaccharide synthase gene of Streptococcus pneumoniae type 37 that is responsible for the production of a beta-glucan capsular polysaccharide. PCR amplification showed the presence of an internal fragment of this gene in twelve strains of P. freudenreichii subsp. shermanii with a ropy phenotype in YEL+ medium. The gene sequence is highly conserved, as less than 1% of nucleotides differed among the 10 strains containing the complete gtf gene. The same primers failed to detect the gene in Propionibacterium acidipropionici strain TL 47, which is known to excrete exopolysaccharides in milk. The presence of (1-->3, 1-->2)-beta-d-glucan capsule was demonstrated for 7 out of 12 strains by agglutination with a S. pneumoniae-type 37-specific antiserum. The presence of mRNA corresponding to the gene was detected by RT-PCR in three strains at both exponential and stationary growth phases. This work represents the first identification of a polysaccharide synthase gene of P. freudenreichii, and further studies will be undertaken to elucidate the role of capsular EPS.

Improvement of Texture and Structure of Reduced-Fat Cheddar Cheese by Exopolysaccharide-Producing Lactococci

The objective of this study was to evaluate the effect of capsular and ropy exopolysaccharide (EPS)-producing strains of Lactococcus lactis ssp. cremoris on textural and microstructural attributes during ripening of 50%-reduced-fat Cheddar cheese. Cheeses were manufactured with added capsule- or ropy-forming strains individually or in combination. For comparison, reduced-fat cheese with or without lecithin added at 0.2% (wt/vol) to cheese milk and full-fat cheeses were made using EPS-nonproducing starter, and all cheeses were ripened at 7 degrees C for 6 mo. Exopolysaccharide-producing strains increased cheese moisture retention by 3.6 to 4.8% and cheese yield by 0.28 to 1.19 kg/100 kg compared with control cheese, whereas lecithin-containing cheese retained 1.4% higher moisture and had 0.37 kg/100 kg higher yield over the control cheese. Texture profile analyses for 0-d-old cheeses revealed that cheeses with EPS-producing strains had less firm, springy, and cohesive texture but were more brittle than control cheeses. However, these effects became less pronounced after 6 mo of ripening. Using transmission electron microscopy, fresh and aged cheeses with added EPS-producing strains showed a less compact protein matrix through which larger whey pockets were dispersed compared with control cheese. The numerical analysis of transmission electron microscopy images showed that the area in the cheese matrix occupied by protein was smaller in cheeses with added EPS-producing strains than in control cheese. On the other hand, lecithin had little impact on both cheese texture and microstructure; after 6 mo, cheese containing lecithin showed a texture profile very close to that of control reduced-fat cheese. The protein-occupied area in the cheese matrix did not appear to be significantly affected by lecithin addition. Exopolysaccharide-producing strains could contribute to the modification of cheese texture and microstructure and thus modify the functional properties of reduced-fat Cheddar cheese.