Ice recrystallisation and melting in ice cream with different proteins levels and subjected to thermal fluctuation

Physicochemical property characterization, amino acid profiling and sensory evaluation of plant-based ice cream incorporated with soy, pea and milk proteins

This study examined the effects of incorporating milk protein concentrate (MPC), pea or soy proteins isolates (PPI and SPI) on the physicochemical, sensorial properties, and amino acid composition of ice creams containing 7% protein, in comparison to dairy ice cream as a reference. As protein ingredients, PPI exhibited higher water and oil holding capacity but lower surface hydrophobicity than SPI and MPC. Viscosity of the mixes were proportional to the firmness of ice cream, and both were highest with use of PPI. MPC ice cream had most similar physical and sensory properties to reference. PPI and SPI ice cream mixes showed higher extent of fat coalescence than MPC and reference. PPI and SPI conferred structural stability to ice cream with lower melting rate and better shape retention, and ability to delay ice recrystallization during temperature flocculation as compared with SMP and MPC. Confocal laser scanning microscope images indicated that higher extent of protein aggregation and more air cells were found in PPI ice cream. Sensory and amino acid profile results revealed that PPI and SPI ice creams were inferior in taste, texture, and essential amino acids like methionine. This study offers insights for the development of high protein frozen desserts.

Effects of inulin with different polymerization degrees on the structural and gelation properties of potato protein

This study investigated the effect of inulin with different polymerization degrees (DP), including L-inulin (DP 2-6), M-inulin (DP 10-23) and H-inulin (DP 23-46), on the structural and gelation properties of potato protein isolate (PPI). Results revealed that textural properties (hardness, cohesiveness, springiness and chewiness) and water-holding capacity (WHC) of PPI-inulin composite gels were positively correlated with the inulin DP and addition content at 0-1.5% (w/v), but deteriorated at 2% due to phase separation. The addition of 1.5% H-inulin showed the most significant increment effects on the WHC (18.65%) and hardness (2.84 N) of PPI gel. Furthermore, M-/H-inulin were more effective in increasing the whiteness and surface hydrophobicity, as well as in strengthening hydrogen bonds and hydrophobic interactions than L-inulin. Fourier transform infrared spectroscopy analysis and microstructural observation indicated that inulin with higher DP promoted more generation of β-sheet structures, and leading to the formation of stronger and finer network structures.

The Influence of Whey Protein Isolate on the Quality Indicators of Acidophilic Ice Cream Based on Liquid Concentrates of Demineralized Whey

The use of liquid whey concentrates in the composition of ice cream, especially in combination with other powdered whey proteins, is limited due to their understudied properties. This article shows the main rheological and thermophysical characteristics of ice cream mixes, as well as color parameters, microstructure, analysis of ice crystals and quality indicators of ice cream during storage. The most significant freezing of free water (p ≤ 0.05) was observed in the temperature range from the cryoscopic temperature to -10 °C. The microscopy of experimental ice cream samples based on hydrolyzed whey concentrates indicates the formation of a homogeneous crystalline structure of ice crystals with an average diameter of 13.75-14.75 μm. Microstructural analysis confirms the expediency of using whey protein isolate in ice cream, which ensures uniform distribution of air bubbles in the product and sufficient overrun (71.98-76.55%). The combination of non-hydrolyzed whey concentrate and 3% whey protein isolate provides the highest stability to preserve the purity and color intensity of the ice cream during storage. The produced ice cream can be classified as probiotic (number of Lactobacillus acidophilus not lower than 6.2 log CFU/g) and protein-enriched (protein supply from 15.02-18.59%).

The Physicochemical Properties and Melting Behavior of Ice Cream Fortified with Multimineral Preparation from Red Algae

Ice cream is a popular frozen food consumed worldwide throughout the year. However, as a thermally unstable product, it requires proper cold chain management. Thermal fluctuations alter the physicochemical properties of ice cream and reduce its quality. This study was conducted to evaluate the physicochemical and sensory properties of ice cream containing different amounts (0.5; 0.8; 1.0%) of a multimineral preparation from Atlantic red algae. The effect of thermal shock on the quality of ice cream after preparation and 90 days of frozen storage was studied. The addition of a multimineral component slightly increased the freezing and glass transition temperatures of the ice cream. The overrun of the ice cream ranged from 48.55 to 52.78% and decreased with the frozen storage time, but the samples with 0.8 and 1.0% mineral content had the most stable overrun in terms of storage time and thermal fluctuations. Ice cream stored for both 7 and 90 days showed a similar melting behavior, although a shift in the melting curves was observed after long frozen storage. The samples exposed to the thermal treatment had lower melting rates by 39.2-59.9% and 55.2-65.4% for 7-day and 90-day stored ice cream, respectively. The hardness parameters of the ice cream did not change significantly under the conditions applied, so the fragility of the ice cream and its fluffiness did not seem to be affected. The organoleptic evaluation showed that ice cream with a mineral content of 0.8% was the most acceptable in terms of taste, texture, and overall acceptability. The applied mineral and sucrose content ratios did not alter the main physicochemical and organoleptic parameters, but significantly affected the nutrient density of the ice cream.

Study of Water Freezing in Low-Fat Milky Ice Cream with Oat β-Glucan and Its Influence on Quality Indicators

The work is devoted to the study of the functional and technological properties of oat β-glucan in low-fat milky ice cream (2% fat) in comparison with the stabilization system Cremodan^® SI 320. β-glucan (0.5%) has a greater effect on the cryoscopic temperature of ice cream mixes than Cremodan^® SI 320 in the same amount (decrease by 0.166 °C vs. 0.078 °C), which inhibits the freezing process of free water in ice cream during technological processing in the temperature range from -5 to -10 °C. Microscopy of ice cream samples after freezing and hardening shows the ability of β-glucan to form a greater number of energy bonds due to specific interaction with milk proteins. Analysis of the microstructure of ice cream samples during 28 d of storage confirms the ability of oat β-glucan to suppress the growth of ice crystals more effectively than Cremodan^® SI 320. Oat β-glucan gives ice cream a rich creamy taste, increases overrun and resistance to melting, which brings this type of frozen dessert closer to a full-fat analogue (10% fat).

Effect of inulin and oat flour on viability of probiotics and physicochemical properties of reduced fat synbiotic ice cream

Purpose

The purpose of this study is to investigate the viability of probiotics, physicochemical and sensory properties of reduced fat synbiotic ice cream.

Design/methodology/approach

The treatments were as follows: control was made by the addition of Lactobacillus salivarius NBIMCC 1589 and Lactobacillus crispatus NBIMCC 2451 (1:1). The treatments (T1, T2 and T3) were made with the addition of L. salivarius NBIMCC 1589 and L. crispatus NBIMCC 2451 (1:1) + 2% oat flour, 2% inulin and 4% oat flour + inulin (1:1). Physiochemical parameters (pH, moisture, fat, protein, fibre, ash, overrun, first dripping time and melting rate) were determined.

Findings

The ice cream with inulin and oat flour had lower moisture content, which was recorded 70.41, 69.88 and 68.82% for T1, T2 and T3, respectively. While the protein, fat and ash content of treated samples increased. The highest acidity (0.43%) was recorded in T3. The overrun increased by around 43% in T3 compared with control. The viable counts of probiotics were significantly (p = 0.05) decreased by two or three log cycles. Finally, T3 received the highest sensory score, which could be due to the combination between oat flour and inulin.

Originality/value

A novel ice cream was produced using a combination of inulin and oat flour, which enhanced the viability of added probiotics. Reduced fat synbiotic ice cream was a good carrier for probiotics, which facilitates the production of healthy dairy products.

Soybean-Oil-Body-Substituted Low-Fat Ice Cream with Different Homogenization Pressure, Pasteurization Condition, and Process Sequence: Physicochemical Properties, Texture, and Storage Stability

The purpose of this research was to explore the impacts of different homogenization pressures, pasteurization conditions, and process sequence on the physical and chemical properties of soybean oil body (SOB)-substituted low-fat ice cream as well as the storage stability of SOB-substituted ice cream under these process parameters. With the increase of homogenization pressure (10–30 MPa), the increase of pasteurization temperature (65 °C for 30 min–85 °C for 15 min), and the addition of SOB before homogenization, the overrun and apparent viscosity of ice cream increased significantly, and the particle size, hardness, and melting rate decreased significantly. Thus, frozen dairy products of desired quality and condition could be obtained by optimizing process parameters. In addition, the SOB ice cream showed better storage stability, which was reflected in lower melting rate and hardness and more stable microstructure compared with the full-milk-fat ice cream. This study opened up new ideas for the application of SOB and the development of nutritious and healthy ice cream. Meanwhile, this research supplied a conceptual basis for the processing and quality optimization of SOB ice cream.

Effects of Soybean Oil Body as a Milk Fat Substitute on Ice Cream: Physicochemical, Sensory and Digestive Properties

Soybean oil body (SOB) has potential as a milk fat substitute due to its ideal emulsification, stability and potential biological activity. In this study, SOB was used as a milk fat substitute to prepare ice cream, expecting to reduce the content of saturated fatty acid and improve the quality defects of ice cream products caused by the poor stability of milk fat at low temperatures. This study investigated the effect of SOB as a milk fat substitute (the substitution amount was 10–50%) on ice cream through apparent viscosity, particle size, overrun, melting, texture, sensory and digestive properties. The results show SOB substitution for milk fat significantly increased the apparent viscosity and droplet uniformity and decreased the particle size of the ice cream mixes, indicating that there were lots of intermolecular interactions to improve ice cream stability. In addition, ice cream with 30% to 50% SOB substitution had better melting properties and texture characteristics. The ice cream with 40% SOB substitution had the highest overall acceptability. Furthermore, SOB substitution for milk fat increased unsaturated fatty acid content in ice cream and fatty acid release during digestion, which had potential health benefits for consumers. Therefore, SOB as a milk fat substitute may be an effective way to improve the nutritional value and quality characteristics of dairy products.