Processing of skim milk powder made using sonicated milk concentrates: A study of physicochemical, functional, powder flow and microbiological characteristics

Investigation of breakage behavior and its effects on spray-dried agglomerated whey protein-lactose powders: Effect of protein and lactose contents

Particle breakage of dairy powders occurs easily during many processes, reducing the powder functionality. The characteristics of particles and the applied stress from processing conditions on the particles are 2 main factors that can be manipulated to reduce breakage. In this study, we explored the effect of whey protein and lactose contents on dynamic breakage in agglomerated whey protein-lactose powders to provide useful information, in terms of particle characteristics, for controlling unwanted dairy powder breakage. A series of model agglomerates with different whey protein:lactose ratios were produced under the same spray-drying conditions, through a pilot plant trial. We evaluated physical characteristics, composition, and structure of samples; analyzed dynamic breakage under different mechanical stresses; and investigated the rehydration and water adsorption properties of model powders before and after breakage. The particle size and irregularity of agglomerates with more lactose was significantly higher than of samples that contained more protein. This resulted in higher particle breakage during dynamic breakage for samples with more lactose. The breakage of agglomerates was affected by the moisture content of powders and fatigue, where particle breakage happens when mechanical loads, lower than the strength of particles, occur multiple times. Breakage changed the morphology and surface composition of particles and decreased particle size. It also decreased the dispersibility of powders and increased the wetting time of wettable samples but decreased the wetting time of powders with poor wettability. Breakage accelerated time-dependent crystallization and decreased the crystallization temperature but did not affect the glass transition temperature of samples. Thus, under the same drying conditions, composition of powders significantly affected breakage, mainly by altering the physical properties of their particles, which resulted in deteriorated functionality.

Ultrasound pretreatment prior to spray drying improve the flowability and water sorption properties of micellar casein concentrate

This research investigated the effect of ultrasound (US) pretreatment prior to spray drying on the powder flow and moisture sorption behaviour of micellar casein concentrate (MCC). MCC produced from skim milk microfiltration was sonicated at energy intensity of 0 (control), 47 J/mL (S-2000), 62 J/mL (S-3000) and 76 J/mL (S-4000). The results revealed that US pretreatment significantly increased the average particle size (D50) from 82.46 μm to 100.73 μm and reduced the surface fat content from 19.2% to 13.8%, resulting in decreased basic flow energy, cake energy and cohesion. Besides, the US treated samples showed relatively poor ability to acquire the moisture from the atmosphere than the control. Protein structure analysis showed that α-helix decreased with enhanced US power, while β-sheet and surface hydrophobicity increased, implying hydrophobic groups were exposed and water sorption rate was impeded. As a result, US pretreatment can improve the powder flow and potentially reduce the negative effect of cake formation at high humidity.