Moisture sorption isotherms of high pressure treated fruit peels used as dietary fiber sources

Water sorption isotherms on lyophilized jabuticaba (Myrciaria cauliflora) peel: potential byproduct for the production of dehydrated foods

In this work, water sorption profiles on lyophilized jabuticaba peel were evaluated using the BET, GAB, Halsey, Henderson, Oswin and Smith isotherm models. All water sorption studies were conducted using the static gravimetric method and saturated CH3COOK, K2CO3, NaBr, SnCl2, KCl and BaCl2 solutions at 20, 30 and 35 °C. The best water sorption isotherm fits were determined with the GAB model at 20 °C, Oswin model at 30 °C and Halsey model at 35 °C. The curve profiles of the isotherm models employed were classified as type III. The results revealed that lyophilized jabuticaba peel can be safely stored at 20, 30 or 35 °C with the monitoring and control of relative humidity, equilibrium humidity and water activity. However, microbial action and undesirable enzymatic reactions may occur at 35 °C when the relative humidity is above 22%. The present results are useful for defining suitable storage and production conditions of a novel jabuticaba peel-based process for the production of dehydrated foods.

Drying Kinetic Modeling and Assessment of Mineral Content, Antimicrobial Activity, and Potential α-Glucosidase Activity Inhibition of a Green Seaweed (Ulva spp.) Subjected to Different Drying Methods

The green algal genus Ulva grows widely on all continents and is used for several applications such as functional foods, cosmeceuticals, nutraceuticals, and pharmaceuticals due to its nutritional characteristics. However, to increase its shelf-life and retain its bioactive components, it is necessary to apply some conservation technology, such as drying. The aim of this work is to describe the drying kinetic behavior of the green seaweed Ulva spp. by applying three dehydration methods: convective drying (CD), vacuum drying (VD), and solar drying (SD) by mathematical modeling and determining the retention of mineral content by atomic absorption spectroscopy and the antimicrobial potential against four strains such as Staphylococcus aureus, Escherichia coli, Saccharomyces cerevisiae, and Penicillium sp. by measurement of inhibition zones and α-glucosidase activity inhibition, as reported by IC50 determination. A freeze-dried sample was used as the control. The equilibrium moisture values calculated using the Guggenheim-Anderson-de Boer model were 0.0108, 0.0108, and 0.0290 g water/g d.m., for CD, VD and SD, respectively. The Midilli and Kucuk model showed robustness to fit all the experimental data of drying kinetic modeling. Ulva spp. is an important source of potassium with a ratio of Na/K < 0.29. Inhibition halos were observed in all samples against S. cerevisiae and Penicillium sp. with higher values than fluconazole action. An inhibitory effect on α-glucosidase activity was observed in all samples, mainly in the freeze-dried sample. Finally, dried Ulva spp. is a rich source of macro- and microminerals with antimicrobial activity and is a potential α-glucosidase inhibitor. Thus, it can be considered as a potential functional ingredient for food manufacturing.

Effect of Pretreatment and High Hydrostatic Pressure on Soluble Dietary Fiber in Lotus Root Residues

High hydrostatic pressure (HHP) can enhance the physicochemical properties of soluble dietary fiber (SDF) from fruit and vegetable residues including hydration properties, emulsibility, and rheological properties, while the pretreatment methods such as solid-water suspension status are ignored all along. Here, three groups of lotus root residue (LRR) for HHP treatment (400 MPa, 15 min) were prepared: the fresh lotus root residue (FLRR), FLRR mixed with water (FLRR + W), and dried FLRR suspended in water at the same solid/water level with FLRR + W (DLRR + W). As a control, non-HHP-treated FLRR was tested. Results showed that FLRR + W obtained the highest SDF yield and presented a honeycomb structure which was not observed in other LRR samples. In addition, properties of SDF extract from FLRR + W changed most significantly, including not only the enhancement of SDF yield, the improvement of hydration properties, and the reduction of molecular weight but also the increase of thermal and rheological stability. Principal component analysis (PCA) profile illustrated that the difference of LRR-water system contributed 27.6% to the SDF physicochemical changes, and SDF from DLRR + W distinguished it from the other samples with mannose, ribose, and glucuronic acid, indicating that the drying procedure also played a role in the HHP treatment focusing on the sugar constitution. Therefore, the solid-water suspension status is a noteworthy issue before HHP treatment aiming at SDF modification.

High Biological Value Compounds Extraction from Citrus Waste with Non-Conventional Methods

Citrus fruits are extensively grown and much consumed around the world. Eighteen percent of total citrus cultivars are destined for industrial processes, and as a consequence, large amounts of waste are generated. Citrus waste is a potential source of high biological value compounds, which can be used in the food, pharmaceutical, and cosmetic industries but whose final disposal may pose a problem due to economic and environmental factors. At the same time, the emerging need to reduce the environmental impact of citrus waste and its responsible management has increased. For these reasons, the study of the use of non-conventional methods to extract high biological value compounds such as carotenoids, polyphenols, essential oils, and pectins from this type of waste has become more urgent in recent years. In this review, the effectiveness of technologies such as ultrasound assisted extraction, microwave assisted extraction, supercritical fluid extraction, pressurized water extraction, pulsed electric field, high-voltage electric discharges, and high hydrostatic pressures is described and assessed. A wide range of information concerning the principal non-conventional methods employed to obtain high-biological-value compounds from citrus waste as well as the most influencing factors about each technology are considered.

Process alternatives for bioethanol production from mango stem bark residues

Three alternatives for bioethanol production from pretreated mango stem bark after maceration (MSBAM) were evaluated as a biorefinery component for the mango agroindustry. These included separate hydrolysis and fermentation (SHF), simultaneous saccharification and fermentation (SSF), and pre-saccharification followed by simultaneous saccharification and fermentation (PSSF). The effects on ethanol concentration, yield and productivity of pretreated MSBAM solids loading, Tween 20 addition, and temperature were used for process comparisons. The highest yields for the SHF, SSF, and PSSF process alternatives were 58.8, 81.6, and 84.5%, respectively. Since saccharification and fermentation are carried out in the same vessel in the SSF alternative, and no significant SSF and PSSF differences in ethanol concentration were observed, SSF is recommended as the best process configuration.