Sequencing of pT5282-CTXM, p13190-KPC and p30860-NR, and comparative genomics analysis of IncX8 plasmids

Successful spread of mcr-1-bearing IncX4 plasmids is associated with variant in replication protein of IncX4 plasmids

IncX4 plasmids are one of the most epidemiologically successful vehicles for mcr-1 spread. Here we found that the IncX4 plasmids carried two different replication proteins encoded by genes pir-1 and pir-2, respectively, but mcr-1 was only carried by IncX4 plasmid encoding pir-1. The copy number of pir-2 encoding plasmids (3.15 ± 0.9 copies) are higher than that of pir-1 encoding plasmids (0.85 ± 0.5 copies). When mcr-1 was cloned into IncX4 plasmid encoding pir-2, the higher copy number of these plasmids resulted in increased expression of mcr-1 and a greater fitness burden on their host cells. However, these plasmids exhibited a lower rate of invasion into the bacterial population compared with mcr-1-positive plasmids encoding the pir-1 gene. These findings collectively explain the absence of mcr-1 in all IncX4 plasmids encoding pir-2. Our results further confirmed that low-copy numbers are important for the spread of mcr-1 plasmid from the perspective of natural evolution.

A Novel IncX Plasmid Mediates High-Level Oxytetracycline and Streptomycin Resistance in Erwinia amylovora from Commercial Pear Orchards in California

Isolates of the fire blight pathogen Erwinia amylovora with high-level resistance to oxytetracycline (minimal inhibitory concentration [MIC] > 100 μg/ml) and to streptomycin (MIC > 100 μg/ml) were recovered from four commercial pear orchards in California between 2018 and 2020. The two representative oxytetracycline- and streptomycin-resistant (OxyTcR-SmR) strains 32-10 and 33-1 were as virulent as the antibiotic susceptible strain 13-1 in causing blossom blight of pear and were recovered more than 50% of the time 7 days after co-inoculation to pear flowers with strain 13-1. In the field, inoculation of strain 32-10 to pear flowers that were pretreated with oxytetracycline at 200 μg/ml did not reduce disease compared with an untreated control. Four OxyTcR-SmR strains were subjected to draft genome sequencing to identify the genetic determinants of antibiotic resistance and their location. A 43.6-kb IncX plasmid, designated pX11-7, was detected in each of the four strains, and this plasmid encoded the tetracycline-resistance gene tetB and the streptomycin-resistance gene pair strAB within a large putatively mobile genetic element consisting of the transposon Tn10 that had inserted within the streptomycin-resistance transposon Tn6082. We also determined that pX11-7 was conjugative and was transferred at a rate that was 104 to 105 higher into an E. amylovora strain isolated in California compared with an E. amylovora strain that was isolated in Michigan. The occurrence of high levels of resistance to both oxytetracycline and streptomycin in E. amylovora strains from commercial pear orchards in California significantly limits the options for blossom blight management in these locations.

Understanding the genetic basis of the incompatibility of IncK1 and IncK2 plasmids

Antimicrobial resistance is a persistent challenge in human and veterinary medicine, which is often encoded on plasmids which are transmissible between bacterial cells. Incompatibility is the inability of two plasmids to be stably maintained in one cell which is caused by the presence of identical or closely related shared determinants between two plasmids originating from partition or replication mechanisms. For I-complex plasmids in Enterobacteriacae, replication- based incompatibility is caused by the small antisense RNA stem-loop structure called RNAI. The I-complex plasmid group IncK consists of two compatible subgroups, IncK1 and IncK2, for which the RNAI differs only by five nucleotides. In this study we focussed on the interaction of the IncK1 and IncK2 RNAI structures by constructing minireplicons containing the replication region of IncK1 or IncK2 plasmids coupled with a kanamycin resistance marker. Using minireplicons excludes involvement of incompatibility mechanisms other than RNAI. Additionally, we performed single nucleotide mutagenesis targeting the five nucleotides that differ between the IncK1 and IncK2 RNAI sequences of these minireplicons. The obtained results show that a single nucleotide change in the RNAI structure is responsible for the compatible phenotype of IncK1 with IncK2 plasmids. Only nucleotides in the RNAI top loop and interior loop have an effect on minireplicon incompatibility with wild type plasmids, while mutations in the stem of the RNAI structure had no significant effect on incompatibility. Understanding the molecular basis of incompatibility is relevant for future in silico predictions of plasmid incompatibility.

Global prevalence, characteristics, and future prospects of IncX3 plasmids: A review

IncX3 plasmids are narrow host range plasmids mostly found in Enterobacteriaceae with great conjugation ability, high stability, no fitness cost, and the ability to improve biofilm formation in their bacterial hosts. IncX3 plasmids have spread swiftly, primarily in several nations and among different species over the last 10 years. blaNDM, blaKPC, and blaOXA-181 are the carbapenemase genes carried by IncX3 plasmids. Among them, blaNDM is often located on the IncX3 plasmid, which is deemed as the primary vehicle of blaNDM transmission. Isolates harboring IncX3 plasmids are found in nations all over the world from human, animal, and environmental sources. Cointegrate plasmids related to IncX3 have recently been discovered to increase the antibiotic resistance spectrum and potentially broaden the host range of plasmids, restricting the use of antibiotics in the clinic. There are, however, few reviews based on the physiological and epidemiological properties of IncX3 plasmid, as well as studies on the plasmid itself. Hence, we conducted a retrospective literature review to summarize the characteristics of IncX3 plasmids aiming to provide a theoretical basis for controlling the global prevalence of IncX3 plasmids and directions for further research on the functions of the related genes on the IncX3 plasmid.

Outbreak of IncX8 Plasmid-Mediated KPC-3-Producing Enterobacterales Infection, China

Carbapenem-resistant Enterobacterales (CRE) infection is highly endemic in China; Klebsiella pneumoniae carbapenemase (KPC) 2-producing CRE is the most common, whereas KPC-3-producing CRE is rare. We report an outbreak of KPC-3-producing Enterobacterales infection in China. During August 2020-June 2021, 25 bla_KPC-3-positive Enterobacteriale isolates were detected from 24 patients in China. Whole-genome sequencing analysis revealed that the bla_KPC-3 genes were harbored by IncX8 plasmids. The outbreak involved clonal expansion of KPC-3-producing Serratia marcescens and transmission of bla_KPC-3 plasmids across different species. The bla_KPC-3 plasmids demonstrated high conjugation frequencies (10^-3 to 10^-4). A Galleria mellonella infection model showed that 2 sequence type 65 K2 K. pneumoniae strains containing bla_KPC-3 plasmids were highly virulent. A ceftazidime/avibactam in vitro selection assay indicated that the KPC-3-producing strains can readily develop resistance. The spread of bla_KPC-3-harboring IncX8 plasmids and these KPC-3 strains should be closely monitored in China and globally.

Genomic analysis of qnr-harbouring IncX plasmids and their transferability within different hosts under induced stress

Background

Conjugative plasmids play a major role in the dissemination of antibiotic resistance genes. Knowledge of the plasmid characteristics and behaviour can allow development of control strategies. Here we focus on the IncX group of plasmids carrying genes conferring quinolone resistance (PMQR), reporting their transfer and persistence within host bacteria of various genotypes under distinct conditions and levels of induced stress in form of temperature change and various concentrations of ciprofloxacin supplementation.

Methods

Complete nucleotide sequences were determined for eight qnr-carrying IncX-type plasmids, of IncX1 (3), IncX2 (3) and a hybrid IncX1-2 (2) types, recovered from Escherichia coli of various origins. This data was compared with further complete sequences of IncX1 and IncX2 plasmids carrying qnr genes (n = 41) retrieved from GenBank and phylogenetic tree was constructed. Representatives of IncX1 (pHP2) and IncX2 (p194) and their qnrS knockout mutants, were studied for influence of induced stress and genetic background on conjugative transfer and maintenance.

Results

A high level of IncX core-genome similarity was found in plasmids of animal, environmental and clinical origin. Significant differences were found between the individual IncX plasmids, with IncX1 subgroup plasmids showing higher conjugative transfer rates than IncX2 plasmids. Knockout of qnr modified transfer frequency of both plasmids. Two stresses applied simultaneously were needed to affect transfer rate of wildtype plasmids, whereas a single stress was sufficient to affect the IncX ΔqnrS plasmids. The conjugative transfer was shown to be biased towards the host phylogenetic proximity. A long-term cultivation experiment pointed out the persistence of IncX plasmids in the antibiotic-free environment.

Conclusions

The study indicated the stimulating effect of ciprofloxacin supplementation on the plasmid transfer that can be nullified by the carriage of a single PMQR gene. The findings present the significant properties and behaviour of IncX plasmids carrying antibiotic resistance genes that are likely to play a role in their dissemination and stability in bacterial populations.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12866-022-02546-6.

SMARTdenovo: a de novo assembler using long noisy reads

Long-read single-molecule sequencing has revolutionized de novo genome assembly and enabled the automated reconstruction of reference-quality genomes. It has also been widely used to study structural variants, phase haplotypes and more. Here, we introduce the assembler SMARTdenovo, a single-molecule sequencing (SMS) assembler that follows the overlap-layout-consensus (OLC) paradigm. SMARTdenovo (RRID: SCR_017622) was designed to be a rapid assembler, which, unlike contemporaneous SMS assemblers, does not require highly accurate raw reads for error correction. It has performed well in the evaluation of congeneric assemblers and has been successfully users for various assembly projects. It is compatible with Canu for assembling high-quality genomes, and several of the assembly strategies in this program have been incorporated into subsequent popular assemblers. The assembler has been in use since 2015; here we provide information on the development of SMARTdenovo and how to implement its algorithms into current projects.

An X1α plasmid from a Salmonella enterica serovar Ohio isolate carrying a novel IS26-bounded tet(C) pseudo-compound transposon

The sequence of a conjugative plasmid, pSRC22-2, found in a multiply antibiotic resistant Salmonella enterica serovar Ohio isolate SRC22 originally cultured from swine in 1999, was determined. Plasmid pSRC22-2 has a copy number of approximately 40 and transfers tetracycline resistance at very high frequency. It was typed as IncX1 using the three typing schemes proposed for X-type plasmids, which utilize the replication region, iteron region and taxC conjugation gene and pSRC22-2 belongs to the X1α subgroup. The plasmid backbone, derived by removing mobile elements, is shared with pOLA52, which was the first fully sequenced IncX1 plasmid, and five other X1α plasmids. The pSRC22-2 backbone is interrupted by a complete copy of an IS903 isoform, partial copies of IS1 and IS903 on either side of a 5930 bp IS26-bounded pseudo-compound transposon (PCT), and a novel 256 bp miniature inverted repeat transposable element (MITE). The MITE belongs to the Tn3 family and was named MITESen1. The PCT, which carries a tet(C) tetracycline resistance determinant, is bounded by copies of a novel IS26 variant, IS26-v4, and was designated PTn6184. Comparison of PTn6184 with other tet(C)-carrying PCTs revealed that it can be derived from the largest, PTntet(C), via a two-step process that re-orders the central fragment and involves both an IS26-mediated event and homologous recombination. IS26-v4, which encodes a variant transposase, Tnp26 G184D, has appeared in only 46 entries in the GenBank non-redundant database.

Genomic diversification of IncR plasmids from China

OBJECTIVES

The aim of this study was to perform a detailed genomic characterisation of IncR plasmids from China.

METHODS

Three IncR plasmids (p13190-tetA, p02085-tetA and p30860-tetA) from clinical isolates ofKlebsiella pneumoniae, Citrobacter freundii and Enterobacter cloacae, respectively, were fully sequenced using high-throughput genome sequencing and were compared with five previously sequenced IncR plasmids (pHN84KPC, pSH-01, pK245, pKPC_P16 and pKPC-LK30) from China.

RESULTS

The eight IncR plasmids from China possessed conserved IncR backbones composed of repB, parAB, umuCD, retA and resD. Resistance accessory modules integrated into the IncR backbones included multidrug resistance (MDR) regions in p30860-tetA, p02085-tetA, p13190-tetA and pK245, bla_KPC-2 regions in pHN84KPC, pKPC-LK30 and pKPC_P16, and the ΔTn1721-sil region in pSH-01. These resistance accessory modules were inserted at a site between retA and vagD, resulting in loss of the backbone genes vagCD in some of the plasmids. The resistance accessory modules differed dramatically from one another and carried distinct profiles of resistance markers. In particular, all of p13190-tetA, p02085-tetA, p30860-tetA, pHN84KPC, pSH-01 and pK245 carried tetracycline resistance tet gene modules, and the carbapenemase gene bla_KPC-2 was identified in pHN84KPC, pKPC-LK30 and pKPC_P16. In addition, one or more regions responsible for plasmid replication and/or maintenance were found in some of the resistance accessory modules, facilitating stable replication of corresponding IncR plasmids at steady-state copy numbers.

CONCLUSIONS

This detailed comparative genomics analysis of IncR plasmids from China provides a deeper insight into the diversification and evolution of IncR plasmids.