Unravelling the mechanism of the interactions of oxazolidine A and E with collagens in ovine skin

Recent progress in functional modification and crosslinking of bioprosthetic heart valves

Valvular heart disease (VHD), clinically manifested as stenosis and regurgitation of native heart valve, is one of the most prevalent cardiovascular diseases with high mortality. Heart valve replacement surgery has been recognized as golden standard for the treatment of VHD. Owing to the clinical application of transcatheter heart valve replacement technic and the excellent hemodynamic performance of bioprosthetic heart valves (BHVs), implantation of BHVs has been increasing over recent years and gradually became the preferred choice for the treatment of VHD. However, BHVs might fail within 10-15 years due to structural valvular degeneration (SVD), which was greatly associated with drawbacks of glutaraldehyde crosslinked BHVs, including cytotoxicity, calcification, component degradation, mechanical failure, thrombosis and immune response. To prolong the service life of BHVs, much effort has been devoted to overcoming the drawbacks of BHVs and reducing the risk of SVD. In this review, we summarized and analyzed the research and progress on: (i) modification strategies based on glutaraldehyde crosslinked BHVs and (ii) nonglutaraldehyde crosslinking strategies for BHVs.

A bioprosthetic heart valve cross-linked by a non-glutaraldehyde reagent with improved biocompatibility, endothelialization, anti-coagulation and anti-calcification properties

Valvular heart disease is an important disease that endangers human health and heart valve replacement has become one of the main treatments for patients with severe valvular heart disease. However, the traditional surgical valve replacement (SVR) suffers several drawbacks such as high risk, great trauma and long recovery time, and more than 30% of patients are intolerant to SVR, especially elderly patients. In recent years, with the development of minimally invasive technology, transcatheter heart valve replacement (THVR) as a method of implantation without thoracotomy has become an optimal treatment for severe valvular heart disease due to its advantages of minimal trauma, low risk and fast recovery. Meanwhile, the usage of bioprosthetic heart valves (BHVs) has been enlarged greatly with the rapid development of THVR and the aging population. Most BHVs in clinics are crosslinked by glutaraldehyde (Glut), which shows great mechanical properties and chemical stability. However, some problems such as poor biocompatibility, calcification, coagulation and endothelialization difficulty also need to be solved urgently for Glut-treated BHVs. In this work, a non-Glut treated BHV from 7a-ethyltetrahydro-oxazolo[3,4-c]oxazole (OX-Et) crosslinked porcine pericardium (PP) has been developed. Compared with glutaraldehyde-crosslinked porcine pericardium (Glut-PP), good physical and chemical properties similar to Glut-PP are shown for OX-Et treated porcine pericardium (OX-Et-PP). It is noteworthy that better biocompatibility, endothelialization performance, and anti-coagulant effect as well as the improved anti-calcification property can also be observed for OX-Et-PP in the in vitro and in vivo study, potentially making OX-Et-PP a good candidate in the application of BHVs.

Tanning capacity of Tessmannia burttii extracts: the potential eco-friendly tanning agents for the leather industry

Abstract

In the present study, the tannins from stem and root barks of Tessmannia burttii Harms (Caesalpiniaceae), a plant species abundantly growing in Tanzania and other parts of Africa, were investigated for their suitability in hides tanning. Tannin powder was extracted at selected temperatures (30, 50 and 80 °C) and the influence of each temperature on the crosslinking capacity was evaluated. The interaction mechanism between hide powder collagen and the tannins was studied by Differential Scanning Calorimetry (DSC), trinitrobenzensulfonic (TNBS) acid assay and amino acid hydrolysis methods. Extraction temperatures showed low influence on crosslinking capacity of the tannins. However, extract obtained at 50 °C exhibited best performance in terms of gap size between Tonset and Tpeak. The stem bark extract yield was higher than that from the root bark, but both were within the recommended ranges. The tannin content (61%) of T. burttii stem bark extract was above recommended value (10%), whereas its total phenolic content and total flavonoic content were found to be above that of commercial Acacia mearnsii tannin. The study of cross-linking parameters as a function of pH showed cross-linking to occur via a covalent mechanism at the basic amino groups. However, the bonds were not resistant to acid hydrolysis. The observed interaction mechanism indicated that tannins from stem and root barks of T. burttii belong to the condensed tannin, similar to A. mearnsii (black wattle), a commercial tannin source that was used in this study as a reference. Findings from this study depict that T. burttii extracts are auspicious eco-friendly alternative source of vegetable tannins to overcome the use of chromium salts in the leather industry.

Graphical abstract

Alternative tanning technologies and their suitability in curbing environmental pollution from the leather industry: A comprehensive review

Chrome tanning remains the most favourite technology in the leather industry worldwide due to its ability to produce leather with attributes desirable for high-quality leather such as excellent hydrothermal stability, better dyeing characteristics and softness. Nevertheless, the technology has been censured globally for its severe environmental detriments and adverse effects on human health and other organisms. Developing alternative eco-friendly tanning technologies capable of producing leather of high quality has remained a challenging scientific inquiry. This review article provides an assessment of various eco-friendly tanning attempts geared towards improving or replacing the chrome technology without compromising the quality of the produced leather. The reviewed publications have ascertained that, these attempts have been centred on recycling of spent liquors; chromium exhaustion enhancement and total replacement of chromium salts. The research gaps and levels of key environmental pollutants from the reviewed technologies are presented, and the qualities of the leather produced from these technologies are highlighted. Of all the examined alternative technologies, total replacement of chromium salts sounds ideal to elude adverse effects associated with chrome tanning. Combination tanning, which implies blending two tanning agents that individually cannot impart desired properties to the leather, is anticipated to be an alternative technology to chrome tanning. Apart from being an eco-friendly technology, combination tanning produces leather with similar features to those produced by chrome tanning. In this regard, blending vegetable tannins with aluminium sulphate provides a promising chrome-free tanning technology. However, further studies to optimize combination tanning technologies to suit industrial applications are highly recommended.

Carbohydrate and collagen-based doubly-grafted interpenetrating terpolymer hydrogel via N-H activated in situ allocation of monomer for superadsorption of Pb(II), Hg(II), dyes, vitamin-C, and p-nitrophenol

Herein, guar gum (GG)-g-(acrylic acid (AA)-co-3-acrylamido propanoic acid (AMPA)-co-acrylamide (AM))-g-cow buffing dust (CBD)/(GGTPCBD), a smart carbohydrate and protein-based doubly-grafted interpenetrating terpolymer hydrogel showing excellent physicochemical properties and recyclability was synthesized by in situ strategic allocation of AMPA during solution polymerization of AA and AM through systematic optimization of the amounts of components and reaction temperature for superadsorption of Hg(II), Pb(II), methyl violet (MV), methylene blue (MB), p-nitrophenol (PNP), and vitamin-C (vit.C). The in situ strategic protrusion of AMPA, grafting of both GG and CBD into AA-co-AMPA-co-AM, and ligand-selective superadsorption was inferred by advanced microstructural analyses of unadsorbed- and/or adsorbed-GGTPCBD using FTIR, ¹H/¹³C NMR, O1s-/N1s-/C1s-/Pb4f_7/2,5/2-/Hg4f_7/2,5/2-XPS, UV-vis, TGA, DSC, XRD, DLS, SEM, EDX, % gel content, % -COOH, and pH_PZC. The prevalence of covalent, ionic, and variegated interactions was rationalized by FTIR, fitting of kinetics data to the pseudosecond order model, and activation energies of adsorption. The BET and Langmuir isotherms fitted the best to MB and Hg(II)/Pb(II)/MV, respectively. Thermodynamically spontaneous chemisorption processes showed the maximum adsorption capacities (ACs) of 976.64, 859.23, 116.80, and 58.52 mg g^-1 for Pb(II), Hg(II), MV, and MB, respectively, at 303 K, adsorbent dose = 0.01 g, and initial concentration of metal ions/dyes = 800/30 ppm.

Scalable Synthesis of Collagenic-Waste and Natural Rubber-Based Biocomposite for Removal of Hg(II) and Dyes: Approach for Cost-Friendly Waste Management

For initiating a prosperous cost-friendly waste management of small-scale industries, cow buffing dust (CBD), one of the abundantly available semisynthetic collagenic solid wastes, has been used as a nonsulfur cross-linker of natural rubber (NR) for fabricating an NRCBD-biocomposite superadsorbent. The as-prepared reusable biocomposite bearing variegated collagenic and noncollagenic N-donors, along with the O-donors, has been reported for ligand-selective preferential superadsorption from waste water. Thus, a CBD and NR-based scalable biocomposite bearing optimum cross-linking, excellent physicochemical properties, and reusability has been developed via systematic optimization of the torque and reaction time for cost-friendly adsorptive exclusion of dyes, such as 2,8-dimethyl-3,7-diamino-phenazine (i.e., safranine, SF) and (7-amino-8-phenoxazin-3-ylidene)-diethylazanium dichlorozinc dichloride (i.e., brilliant cresyl blue), BCB, and Hg(II). The CBD-aided curing of NR has been achieved through the formation of a cross-linked chromane-ring originated via reaction between the methylol-phenol ring of phenol-formaldehyde resin and isoprene unit of NR. The partial disappearance of unsaturation in cured-NRCBD, relative variation of crystallinity, surface properties, elevated thermal stabilities, and ligand-selective superadsorption have been studied by advanced microstructural analyses of unadsorbed and/or adsorbed NRCBD using Fourier transform infrared (FTIR), 13C nuclear magnetic resonance, ultraviolet-visible, and O 1s-/N 1s-/C 1s-/Hg 4f7/2,5/2-X-ray photoelectron spectroscopies, thermogravimetric analysis, differential scanning calorimetry, X-ray diffraction, field emission scanning electron microscopy, energy-dispersive spectroscopy, and pHPZC. Response surface methodology-based optimization has been employed to attain the optimum potential of NRCBD, considering the interactive effects between pHi, temperature, and concentration of the dye. H-aggregate and time-dependent hypochromic effect has been observed during individual adsorption of dyes. Moreover, the prevalence of chemisorption via ionic interaction between NRCBD and SF, BCB, and Hg(II) has been realized by FTIR, fitting of kinetics data to the pseudosecond-order model, and measurement of activation energies. The Brunauer-Emmett-Teller and Langmuir isotherms fit the best to BCB and SF/Hg(II), respectively. Thermodynamically spontaneous chemisorption have shown the maximum adsorption capacities of 303.61, 46.14, and 166.46 mg g-1 for SF, BCB, and Hg(II), respectively, at low initial concentration of Hg(II)/dyes = 40 ppm, 303 K, and adsorbent dose = 0.01 g.

Can sodium silicates affect collagen structure during tanning? Insights from small angle X-ray scattering (SAXS) studies

Sodium silicates can pseudo-stabilize collagen molecules during leather processing by preventing collagen molecules from undergoing conformational changes due to the silica coating on the fibrils.

Stabilization of collagen by cross-linking with oxazolidine E-resorcinol

Cross-linking agents play an important part in the physical properties of collagen based biomaterials. This paper describes the stabilization of type I collagen using an oxazolidine E-resorcinol compound. It is shown by NMR and elemental analysis techniques that oxazolidine E undergoes ring opening to form an N-methylol intermediate form and then reacts with the hydrogen bonds of resorcinol. Oxazolidine E-resorcinol compound treated collagen fibers are shown by DSC analysis to be more thermally stable than simple oxazolidine E-resorcinol treated collagen. Treated collagen fibers showed shrinkage temperature around 98 degrees C implying that the oxazolidine E-resorcinol compounds impart thermal stability. Circular dichroism revealed that there is no major alteration in the structure of collagen after treatment with the compound. The study demonstrates that the involvement of hydrogen bonding and hydrophobic interaction as the principal mechanisms for stabilization of collagen by oxazolidine E-resorcinol compounds.