Evaluation of immobilized lipases on poly-hydroxybutyrate beads to catalyze biodiesel synthesis

Pretreatment of shrimp shells with an acidic deep eutectic solvent system for chitin extraction and its enhanced performance as a carrier for immobilized lipase

Existing methods for chitin extraction usually produce substantial waste, which poses ecological hazards. Natural deep eutectic solvent (NADES) offers a promising one-step pretreatment alternative, replacing the resource-intensive demineralization (DM) and deproteinization (DP) process. Hence, in this study, the influence of various acidic NADES, on achieving a simplified one-step DM and DP in the chitin extraction process was investigated. The study yielded chitin with 87.73 % purity, and microstructural analysis showed that NADES pretreatment minimally affected chitin quality without deacetylation. In addition, chitin extracted using choline chloride-oxalic acid as a carrier displayed excellent performance in the immobilization of Geobacillus thermocatenulatus lipase 2 (GTL2) because of obvious Ca2+ activation effect. This process contributed to enhancement of immobilized enzyme activity. The immobilized GTL2 showed excellent hydrolytic capabilities, with its highest activity reaching 547.80 ± 20.62 U/mg, significantly better than the five commercial lipases that exhibited <40 % of the enzyme activity. Furthermore, the hydrolytic capacity of immobilized GTL2 was notably high for 4-nitrophenyl butyrate, measuring 935.47 ± 51.60 U/mg. This study provided a constructive approach for the one-step pretreatment of shrimp shells with organic acid-based NADES to isolate and purify chitin and its potential application as an immobilized carrier to enhance enzyme activity.

Synthesis of hexyl butyrate (apple and citrus aroma) by Candida rugosa lipase immobilized on Diaion HP-20 using the Box-Behnken design

This study aims at the synthesis of hexyl butyrate by Candida rugosa lipase (CRL) immobilized on Diaion HP 20. The lipase load used was 28.7 ± 2.1 mg/g (mg of lipase/g of support), whose hydrolytic activity was 132.0 ± 2.5 U/g. To obtain the maximum production of hexyl butyrate, the Box-Behnken design statistical planning was used, having as independent variables; biocatalyst concentration, temperature and acid:alcohol molar ratio and ester conversion as a dependent variable at 60, 180 and 480 min. For 60 min, 90.8% conversion was obtained at 47.25 ºC, 1:1.4 molar ratio and 17.65% of biocatalyst; 180 min, 94.5% conversion at 59.5 ºC, 1:2 molar ratio and 15.8% biocatalyst; 480 min, 95.01% conversion at 47.0 ºC, 1:2 molar ratio and 16.9% biocatalyst. CRL-Diaion HP 20 retained 60% of its initial activity after ten cycles of reactions showing potential for industrial use. The ester produced was identified by gas chromatography analyses.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-022-01200-1.

Immobilization of the metagenomic lipase, LipG9, on porous pellets of poly-hydroxybutyrate produced by the double emulsion solvent evaporation technique

This work aimed to produce porous poly-hydroxybutyrate (PHB) pellets in order to evaluate the pellets as a support for immobilization of the metagenomic lipase, LipG9. Four types of pelletized PHB particles with different morphological characteristics were obtained using the double emulsion and solvent evaporation technique (DESE). The micropores of these PHB pellets had similar average diameters (about 3 nm), but the pellets had different specific surface areas: 11.7 m² g^-1 for the PHB powder, 8.4 m²  g^-1 for the control pellets (Ø < 0.5 mm, produced without the pore forming agent), 10.0 m²  g^-1 for the small pellets (Ø < 0.5 mm), 9.5 m²  g^-1 for the medium pellets (0.5 < Ø < 0.8 mm) and 8.4 m²  g^-1 for the large pellets (Ø > 1.4 mm). Purified LipG9 was immobilized by adsorption on these pellets, and the results were compared with those obtained with PHB powder. The highest immobilization yield (83%) was obtained for the medium PHB pellets, followed by large (76%) and small (55%) PHB pellets. The activity of LipG9 immobilized on the pellets, for the synthesis of ethyl oleate in n-hexane, was highest for the medium pellets (22 U g^-1 ). The immobilization yield was high for PHB powder (99%) but the esterification activity was slightly lower (20 U g^-1 ). These results show that pelletized PHB beads can be used for the immobilization of lipases, with the advantage that pelletized PHB will perform better than PHB powder in large-scale enzyme bioreactors.

Obtention of biodiesel through an enzymatic two-step process. Study of its performance and characteristic emissions

We describe the enzymatic synthesis of biodiesel from waste cooking oil (WCO) in a two-step production process: hydrolysis of WCO, followed by acid-catalyzed esterification of free fatty acids (FFAs). Among the three commercial enzymes evaluated, the inexpensive lipase Lipex® 100L supported on Lewatit® VP OC 1600 produced the best overall biodiesel yield (96.3%). Finally, we assessed the combustion efficiency of the obtained biodiesel and its blends. All blends tested presented lower emissions of CO and HC compared to diesel. The NOx emissions were higher due to biodiesel's high volatility and viscosity. The cost of biodiesel production was calculated using the process described.

Immobilized phytases: an overview of different strategies, support material, and their applications in improving food and feed nutrition

Phytases are the most widely used food and feed enzymes, which aid in nutritional improvement by reducing anti-nutritional factor. Despite the benefits, enzymes usage in the industry is restricted by several factors such as their short life-span and poor reusability, which result in high costs for large-scale utilization at commercial scale. Furthermore, under pelleting conditions such as high temperatures, pH, and other factors, the enzyme becomes inactive due to lesser stability. Immobilization of phytases has been suggested as a way to overcome these limitations with improved performance. Matrices used to immobilize phytases include inorganic (Hydroxypatite, zeolite, and silica), organic (Polyacrylamide, epoxy resins, alginate, chitosan, and starch agar), soluble matrix (Polyvinyl alcohol), and nanomaterials including nanoparticles, nanofibers, nanotubes. Several surface analysis methods, including thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), and FTIR analysis, have been used to characterize immobilized phytase. Immobilized phytases have been used in a broad range of biotechnological applications such as animal feed, biodegradation of food phytates, preparations of myo-inositol phosphates, and sulfoxidation by vanadate-substituted peroxidase. This article provides information on different matrices used for phytase immobilization from the last two decades, including the process of immobilization and support material, surface analysis techniques, and multifarious biotechnological applications of the immobilized phytases.

Constitutive Expression in Komagataella phaffii of Mature Rhizopus oryzae Lipase Jointly with Its Truncated Prosequence Improves Production and the Biocatalyst Operational Stability

Rhizopus oryzae lipase (ROL) containing 28 C-terminal amino acids of the prosequence fused to the N-terminal mature sequence in ROL (proROL) was successfully expressed in the methylotrophic yeast Komagataella phaffii (Pichia pastoris) under the constitutive glyceraldehyde-3-phosphate dehydrogenase promoter (PGAP). Although the sequence encoding the mature lipase (rROL) was also transformed, no clones were obtained after three transformation cycles, which highlights the importance of the truncated prosequence to obtain viable transformed clones. Batch cultures of the K. phaffii strain constitutively expressing proROL scarcely influenced growth rate and exhibited a final activity and volumetric productivity more than six times higher than those obtained with proROL from K. phaffii under the methanol-inducible alcohol oxidase 1 promoter (PAOX1). The previous differences were less marked in fed-batch cultures. N-terminal analysis confirmed the presence of the 28 amino acids in proROL. In addition, immobilized proROL exhibited increased tolerance of organic solvents and an operational stability 0.25 and 3 times higher than that of immobilized rROL in biodiesel and ethyl butyrate production, respectively. Therefore, the truncated prosequence enables constitutive proROL production, boosts bioprocess performance and provides a more stable biocatalyst in two reactions in which lipases are mostly used at industrial level, esterification (ethyl butyrate) and transesterification (biodiesel).

Immobilized GDEst-95, GDEst-lip and GD-95RM lipolytic enzymes for continuous flow hydrolysis and transesterification reactions

In this study lipolytic biocatalysts GD-95RM, GDEst-95 and GDEst-lip were immobilized by encapsulation in calcium alginate beads_. All three immobilized biocatalysts demonstrated significantly increased thermal stability at 60-70 °C temperatures and the activity of GD-95RM lipase increased by 50% at 70-80 °C following the immobilization. Moreover, encapsulated GDEst-95 esterase retained higher than 50% lipolytic activity after 3 months of incubation with butanol (25%) and ethanol (50%); GDEst-lip enzyme possessed 50% activity after 2 months of treatment with ethanol (25%) and methanol (25%); and GD-95RM lipase displayed higher that 50% activity after two-week incubation with methanol (50%). All three immobilized enzymes displayed long-term storage capability (>50% activity) at least until 3 months at 4 °C. It was also detected that immobilized GD-95RM and GDEst-lip can perform flow hydrolysis of both avocado oil and p-NP dodecanoate in prototype packed-bed column reactor. The analysis of continuous transesterification of avocado or sunflower oil with ethanol or methanol as substrates confirmed that encapsulated GD-95RM and GDEst-lip enzymes is a useful approach to produce fatty acid alkyl esters.

Investigation of effect of ultrasound on immobilized C. rugosa lipase: Synthesis of biomass based furfuryl derivative and green metrics evaluation study

The present work deals with the synthesis of lab-made carboxymethyl cellulose (CMC) and chitosan (CHI) based co-polymer cross-linked with glutaraldehyde (GLU) which is used as immobilization matrix for the immobilization of Candida rugosa (CRL) lipase (CMC:CHI:GLU:CRL). This immobilized biocatalyst was subjected to characterization such as lipase-activity, kinetic-parameters, water-content, surface-texture, stability and half-life time etc. Effect of various ultrasound parameters (power, frequency, duty cycle, exposure time) on lipase activity is also tested which indicated that, developed biocatalyst has significant activity-stability and half-life-time in ultrasonicated medium. Further, this biocatalyst was applied to synthesize biomass-derived furfuryl derivative which offering excellent conversion of 99 % of bio-based furfuryl ester. The synthetic protocol is optimized in detail (with twelve reaction parameters) under ultrasonicated medium. Recyclability study offered 68 % conversion of the furfuryl ester after sixth reuse. Moreover, the developed protocol is well extended to synthesize various commercially important compounds. Besides this, we investigated thermodynamic parameters (ΔG*, ΔH*, ΔS*) which demonstrating more feasibility of biocatalytic synthesis in ultrasonicated medium than conventional medium. Finally, green metrics evaluation parameters (E-factor, carbon-efficiency and mass-intensity) are studied which indicating efficient synergetic role of immobilized CMC:CHI:GLU:CRL lipase biocatalysis and ultrasonication in green and sustainable synthesis.

Biocatalysis at Extreme Temperatures: Enantioselective Synthesis of both Enantiomers of Mandelic Acid by Transesterification Catalyzed by a Thermophilic Lipase in Ionic Liquids at 120 °C

The use of biocatalysts in organic chemistry for catalyzing chemo-, regio- and stereoselective transformations has become an usual tool in the last years, both at lab and industrial scale. This is not only because of their exquisite precision, but also due to the inherent increase in the process sustainability. Nevertheless, most of the interesting industrial reactions involve water-insoluble substrates, so the use of (generally not green) organic solvents is generally required. Although lipases are capable of maintaining their catalytic precision working in those solvents, reactions are usually very slow and consequently not very appropriate for industrial purposes. Increasing reaction temperature would accelerate the reaction rate, but this should require the use of lipases from thermophiles, which tend to be more enantioselective at lower temperatures, as they are more rigid than those from mesophiles. Therefore, the ideal scenario would require a thermophilic lipase capable of retaining high enantioselectivity at high temperatures. In this paper, we describe the use of lipase from Geobacillus thermocatenolatus as catalyst in the ethanolysis of racemic 2-(butyryloxy)-2-phenylacetic to furnish both enantiomers of mandelic acid, an useful intermediate in the synthesis of many drugs and active products. The catalytic performance at high temperature in a conventional organic solvent (isooctane) and four imidazolium-based ionic liquids was assessed. The best results were obtained using 1-ethyl-3-methyl imidazolium tetrafluoroborate (EMIMBF4) and 1-ethyl-3-methyl imidazolium hexafluorophosphate (EMIMPF6) at temperatures as high as 120 °C, observing in both cases very fast and enantioselective kinetic resolutions, respectively leading exclusively to the (S) or to the (R)-enantiomer of mandelic acid, depending on the anion component of the ionic liquid.

Diversity of virulence-associated genes in pathogenic Aeromonas hydrophila isolates and their in vivo modulation at varied water temperatures

Most environmental parameters have no consistent effect on the expression of bacterial genes responsible for their virulence. However, as fish are poikilothermic, the possibility of temperature variation having a pronounced effect on the expression of virulence-associated gene(s) of bacteria infecting the host needs to be investigated. In this study, the diversity of virulence genes in seven Aeromonas hydrophila isolates collected from diseased fish from different parts of India was characterized, and the effect of temperature variation on the extent of expression of their virulence was investigated. All bacterial isolates were screened for a total of nine bacterial virulent genes {aerolysin, hemolysin, cytoen, outer membrane protein TS (Omp TS), elastase, flagellin, lipase, β hemolysin and type 3 secretion system}, and the diversity in their presence or absence were marked at a particular in vitro condition. Three bacterial isolates (nos. 1, 7 and 2) were selected for further study, based on their ability to cause varied mortalities (20-100%) in Labeo rohita juveniles in intraperitoneal challenge study. Further, three isolates were injected intraperitoneally into L. rohita fingerlings at three different temperatures (i.e., 20, 28 and 37 °C) and at 6 h post-challenge, the kidney samples were collected to measure the levels of all nine bacterial virulence genes using semi-quantitative PCR. The maximum level of amplicons of virulence genes in all three A. hydrophila isolates was noticed at 28 °C as compared to 37 °C and 20 °C. It was also observed that haemolysin played a more prominent role in the expression of virulence, when compared to cytoen gene. Hence, it was concluded that water temperature does play a crucial role in governing virulence gene expression, and a temperature of 28 °C would be considered as suitable for looking into the pathogenicity of A. hydrophila for conducting any challenge study with this organism in tropical environment.

Recent Trends in Biomaterials for Immobilization of Lipases for Application in Non-Conventional Media

The utilization of biomaterials as novel carrier materials for lipase immobilization has been investigated by many research groups over recent years. Biomaterials such as agarose, starch, chitin, chitosan, cellulose, and their derivatives have been extensively studied since they are non-toxic materials, can be obtained from a wide range of sources and are easy to modify, due to the high variety of functional groups on their surfaces. However, although many lipases have been immobilized on biomaterials and have shown potential for application in biocatalysis, special features are required when the biocatalyst is used in non-conventional media, for example, in organic solvents, which are required for most reactions in organic synthesis. In this article, we discuss the use of biomaterials for lipase immobilization, highlighting recent developments in the synthesis and functionalization of biomaterials using different methods. Examples of effective strategies designed to result in improved activity and stability and drawbacks of the different immobilization protocols are discussed. Furthermore, the versatility of different biocatalysts for the production of compounds of interest in organic synthesis is also described.

Application of lipase immobilized on a hydrophobic support for the synthesis of aromatic esters

The present study aimed at preparing three biocatalysts via physical adsorption of lipases from Candida rugosa (CRL), Mucor javanicus, and Candida sp. on a hydrophobic and mesoporous support (Diaion HP-20). These biocatalysts were later applied to the synthesis of aromatic esters of apple peel and citrus (hexyl butyrate), apple and rose (geranyl butyrate), and apricot and pineapple (propyl butyrate). Scanning electron microscopy and gel electrophoresis confirmed a selective adsorption of lipases on Diaion, thus endorsing simultaneous immobilization and purification. Gibbs free energy (∆G) evinced the spontaneity of the process (-17.9 kJ/mol ≤ ∆G ≤ -5.1 kJ/mol). Maximum immobilized protein concentration of 30 mg/g support by CRL. This biocatalyst was the most active in olive oil hydrolysis (hydrolytic activity of 126.0 ± 2.0 U/g) and in the synthesis of aromatic esters. Maximum conversion yield of 89.1% was attained after 150 Min for the synthesis of hexyl butyrate, followed by the synthesis of geranyl butyrate (87.3% after 240 Min) and propyl butyrate (80.0% after 150 Min). CRL immobilized on Diaion retained around 93% of its original activity after six consecutive cycles of 150 Min for the synthesis of hexyl butyrate.

Enzymatic degradation of ginkgolic acid by laccase immobilized on novel electrospun nanofiber mat

BACKGROUND

Ginkgo biloba leaf extract contains many active ingredients that are beneficial for health. However, ginkgolic acid, one of the major components found in G. biloba extract, may cause serious allergic and toxic side effects. The purpose of this study is to immobilize the laccase system on the electrospun nylon fiber mat (NFM) to hydrolyze the ginkgolic acid in G. biloba leaf extract efficiently.

RESULTS

Novel electrospinning technology successfully produced high-quality nanoscopic fiber mats made of a mixture of multi-walled carbon nanotube and nylon 6,6. Laccase that was immobilized onto the NFM exhibited much higher efficiency in the catalyzation of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS) than nylon 6,6 pellets. After being immobilized onto the NFM, the pH and temperature stability of laccase were significantly improved. The NFM-immobilized laccase could maintain more than 50% of its original activity even after 40 days of storage or 10 operational cycles. The kinetic parameters, including rate constant (K), the time (τ50) in which 50% of ginkgolic acid hydrolysis was reached, the time (τcomplete) required to achieve complete ginkgolic acid hydrolysis, Km and Vmax were determined, and were 0.07 ± 0.01 min^-1 , 8.97 ± 0.55 min, 45.45 ± 2.79 min, 0.51 ± 0.09 mM and 0.49 ± 0.03 mM min^-1  mg^-1 , respectively.

CONCLUSION

The result successfully demonstrated the strong potential of using novel electrospun nanofiber mats as enzyme immobilization platforms, which could significantly enhance enzyme activity and stability. © 2020 Society of Chemical Industry.

Cost analysis of oil cake-to-biodiesel production in packed-bed micro-flow reactors with immobilized lipases

Biodiesel production depends to a great extent on the use of cheap raw materials, since biodiesel itself is a mass product, not a high-value product. New processing methods, such as micro-flow continuous processing combined with enzymatic catalysis, open doors to the latter. As reported here, the window of opportunity in enzyme-catalyzed biodiesel production is the conversion of waste cooking oil. The main technological challenge for this is to obtain efficient immobilization of the lipase catalyst on beads. The beads can be filled into tubular reactors where designed packed-bed provide porous channels, forming micro-flow. It turns out, that in this way, the immobilization costs become the decisive economic factor. This paper reports a solution to that issue. The use of oil cake enables economic viability, which is not given by any of the commercial polymeric substrates used so far for enzyme immobilization. The costs of immobilization are mirrored in the earnings and cash flow of the new biotechnological process.

Hydrolyzation of mogrosides: Immobilized β-glucosidase for mogrosides deglycosylation from Lo Han Kuo

An immobilized enzyme system for bioconversion of Lo Han Kuo (LHK) mogrosides was established. β-Glucosidase which was covalently immobilized onto the glass spheres exhibited a significant bioconversion efficiency from pNPG to pnitrophenol over other carriers. Optimum operational pH and temperature were determined to be pH 4 and 30°C. Results of storage stability test demonstrated that the glass sphere enzyme immobilization system was capable of sustaining more than 80% residual activity until 50 days, and operation reusability was confirmed for at least 10 cycles. The Michaelis constant (K m) of the system was determined to be 0.33 mM. The kinetic parameters, rate constant (K) at which Mogrosides conversion was determined, the τ 50 in which 50% of mogroside V deglycosylation/mogroside IIIE production was reached, and the τ complete of complete mogroside V deglycosylation/mogroside IIIE production, were 0.044/0.017 min-1, 15.6/41.1 min, and 60/120 min, respectively. Formation of the intermediates contributed to the kinetic differences between mogroside V deglycosylation and mogroside IIIE formation.

Novozym 435: the “perfect” lipase immobilized biocatalyst?

Novozym 435 (N435) is a commercially available immobilized lipase produced by Novozymes with its advantages and drawbacks.

New Strategy for the Immobilization of Lipases on Glyoxyl-Agarose Supports: Production of Robust Biocatalysts for Natural Oil Transformation

Immobilization on Glyoxyl–agarose support (Gx) is one of the best strategies to stabilize enzymes. However, the strategy is difficult to apply at neutral pH when most enzymes are stable and, even when possible, produces labile derivatives. This work contributes to overcoming this hurdle through a strategy that combines solid-phase amination, presence of key additives, and derivative basification. To this end, aminated industrial lipases from Candida artarctica (CAL), Thermomyces lunuginosus (TLL), and the recombinant Geobacillus thermocatenulatus (BTL2) were immobilized on Gx for the first time at neutral pH using anthranilic acid (AA) or DTT as additives (immobilization yields >70%; recovered activities 37.5–76.7%). The spectroscopic evidence suggests nucleophilic catalysis and/or adsorption as the initial lipase immobilization events. Subsequent basification drastically increases the stability of BTL2–glyoxyl derivatives under harsh conditions (t_1/2, from 2.1–54.5 h at 70 °C; from 10.2 h–140 h in 80% dioxane). The novel BTL2-derivatives were active and selective in fish oil hydrolysis (1.0–1.8 μmol of polyunsaturated fatty acids (PUFAs) min⁻¹·g⁻¹) whereas the selected TLL-derivative was as active and stable in biodiesel production (fatty ethyl esters, EE) as the commercial Novozyme^®-435 after ten reaction cycles (~70% EE). Therefore, the potential of the proposed strategy in producing suitable biocatalysts for industrial processes was demonstrated.

Development of nanobiocatalysts through the immobilization of Pseudomonas fluorescens lipase for applications in efficient kinetic resolution of racemic compounds

The present work reports covalent immobilization of Pseudomonas fluorescens lipase (PFL) on functionalized multiwalled carbon nanotubes (MWCNTs) as a nanobiocatalyst (NBC). This nanobiocatalyst facilitates efficient kinetic resolution of (RS)-1-phenylethanol into (S)-1-phenylethanol [C=49.7%, ee_p=99.5%, ee_s=98.1% and E value=191.4]. The immobilized preparation (MWCNTs-PFL) showed ten-fold increase in activity, thermal stability upto 80 °C and recyclability (8 cycles). MWCNTs-PFL nanobioconjugate demonstrated better stability and enhanced activity compared to covalently immobilized PFL on other matrices (silver nanoparticles, gold nanoparticles and chitosan beads) used for the study. A statistical design [response surface methodology (RSM)] employed for the optimization of enzyme immobilization parameters made this study statistically more significant. Overall, the newly developed nanobiocatalyst has applications towards the kinetic resolution of racemic compounds.

Selection of Lipases for the Synthesis of Biodiesel from Jatropha Oil and the Potential of Microwave Irradiation to Enhance the Reaction Rate

The present study deals with the enzymatic synthesis of biodiesel by transesterification of Jatropha oil (Jatropha curcas L.) with ethanol in a solvent-free system. Seven commercial lipase preparations immobilized by covalent attachment on epoxy-polysiloxane-polyvinyl alcohol composite (epoxy-SiO₂-PVA) were tested as biocatalysts. Among them, immobilized lipases from Pseudomonas fluorescens (lipase AK) and Burkholderia cepacia (lipase PS) were the most active biocatalysts in biodiesel synthesis, reaching ethyl ester yields (FAEE) of 91.1 and 98.3% at 72 h of reaction, respectively. The latter biocatalyst exhibited similar performance compared to Novozym® 435. Purified biodiesel was characterized by different techniques. Transesterification reaction carried out under microwave irradiation exhibited higher yield and productivity than conventional heating. The operational stability of immobilized lipase PS was determined in repeated batch runs under conventional and microwave heating systems, revealing half-life times of 430.4 h and 23.5 h, respectively.

Enzymatic synthesis of isoamyl butyrate catalyzed by immobilized lipase on poly-methacrylate particles: optimization, reusability and mass transfer studies

Isoamyl butyrate (banana flavor) was synthesized by esterification reaction of isoamyl alcohol and butyric acid in heptane medium. Immobilized Thermomyces lanuginosus lipase (TLL) prepared via physical adsorption on mesoporous poly-methacrylate particles (PMA) was used as biocatalyst. The factors that affect the esterification reaction were optimized by response surface methodology (RSM). Under optimal experimental conditions, maximum ester conversion percentage of 96.1 and 73.6% was reached after 50 and 90 min, respectively, for esterification reaction performed at equimolar ratio alcohol:acid at 500 and 2000 mM of each substrate. Under these experimental conditions, the esterification reaction was not controlled by external and intra-particle mass transfer effects. The product (isoamyl butyrate) was confirmed by proton nuclear magnetic resonance ((1)H NMR) spectroscopy. Reusability tests showed that the biocatalyst retained around 96 and 31% of its initial activity after eight successive esterification cycles performed at 500 and 2000 mM, respectively. The application of the biocatalyst prepared showed to be a promising strategy to catalyze flavor ester synthesis in a non-aqueous medium.

Immobilization of Pseudomonas fluorescens lipase on hydrophobic supports and application in biodiesel synthesis by transesterification of vegetable oils in solvent-free systems

This work describes the preparation of biocatalysts for ethanolysis of soybean and babassu oils in solvent-free systems. Polystyrene, Amberlite (XAD-7HP), and octyl-silica were tested as supports for the immobilization of Pseudomonas fluorescens lipase (PFL). The use of octyl-silica resulted in a biocatalyst with high values of hydrolytic activity (650.0 ± 15.5 IU/g), immobilization yield (91.3 ± 0.3 %), and recovered activity (82.1 ± 1.5 %). PFL immobilized on octyl-silica was around 12-fold more stable than soluble PFL, at 45 °C and pH 8.0, in the presence of ethanol at 36 % (v/v). The biocatalyst provided high vegetable oil transesterification yields of around 97.5 % after 24 h of reaction using babassu oil and around 80 % after 48 h of reaction using soybean oil. The PFL-octyl-silica biocatalyst retained around 90 % of its initial activity after five cycles of transesterification of soybean oil. Octyl-silica is a promising support that can be used to immobilize PFL for subsequent application in biodiesel synthesis.

Synthesis of lipase nano-bio-conjugates as an efficient biocatalyst: characterization and activity–stability studies with potential biocatalytic applications

Synthesis of lipase nano-bio-conjugate and their detail biocatalytic application studies.