Development of regenerated cellulose/halloysite nanotube bionanocomposite films with ionic liquid

Pectin wrapped halloysite nanotube reinforced Polycaprolactone films for potential wound healing application

The current research work focuses on preparing the polycaprolactone (PCL) based nanocomposite films embedded with surface modified Halloysite Nanotube (HNT). The avenue of the study is to unravel the applicability of polymer nanocomposites for wound healing. The flexible property of HNT was taken as the major force to accomplish the addition of biopolymer pectin onto its surface. Functionalization of HNT with pectin has certainly enhanced its binding nature with the polymer. The PCL nanocomposite films were characterized by several promising techniques such as FTIR, XRD, DSC-TGA, FESEM, TEM, AFM, and mechanical properties were too examined along. When compared to the plane PCL film, the nanocomposite films manifested favorable results in terms of mechanical and chemical properties. Additionally, biometric studies such as in-vitro swelling, enzymatic degradation, and hemolysis performed on the films gave extremely good results. The haemolytic percentage recorded for the films exhibited a steady decrease with increasing amount of nanofillers. The MTT assay showed cell proliferation and its increase as the embedded HNT is more in the matrix. Wound closure study performed on NIH3T3 cell line with 1, 3 and 5wt% of films has given a strong proof for the involvement of polymer and HNT in the healing procedure.

Tensile Modulus of Polymer Halloysite Nanotube Systems Containing Filler–Interphase Networks for Biomedical Requests

To date, there have been a limited number of studies modeling the tensile modulus in the polymer halloysite nanotube (HNT) systems before or after percolation onset. In this paper, an equation for a composite’s modulus post-percolation onset was developed for HNT-filled samples including the interphase and HNT network. The dispersed nanoparticles and adjoining interphase part were neglected, because they caused ineffective influences on the stiffness of the system after percolation onset. The developed model reflects the impacts of HNTs’ size, interphase depth, percolation onset and the volume shares and moduli of the HNT network and its adjacent interphase on the modulus of HNT-based systems. The impacts of issues on the nanocomposite modulus are defendable, confirming the effectiveness of the developed model. HNT length, interphase depth, HNT concentration, net modulus and net portion directly influenced the stiffness, while the HNT radius and percolation onset had inverse effects. Results show that there was a 142% improvement in the modulus of samples at an interphase depth of 40 nm. Moreover, the stiffness improved by 60% at a net modulus of 200 GPa, but it later exhibited a 180% enhancement at a net modulus of 1000 GPa. In addition, the experimental data for the modulus of numerous composites display fine agreement to the predictions, confirming the validity of the developed model.

Development of a model for modulus of polymer halloysite nanotube nanocomposites by the interphase zones around dispersed and networked nanotubes

Theoretical studies on the mechanical properties of halloysite nanotube (HNT)-based nanocomposites have neglected the HNT network and interphase section, despite the fact that the network and interphase have significant stiffening efficiencies. In the present study, the advanced Takayanagi equation for determining the modulus of nanocomposites is further developed by considering the interphase zones around the dispersed and networked HNTs above percolation onset. Furthermore, simple equations are provided to determine the percolation onset of HNTs and the volume portions of HNTs and interphase section in the network. The experimental values obtained for many samples and the assessments of all relevant factors validate the proposed model. The high ranges of HNT concentration, interphase depth, HNT modulus, HNT length, network modulus, interphase modulus, interphase concentration, and network fraction enhance the system modulus. However, the low levels of HNT radius, percolation onset, and matrix modulus can intensify the reinforcing effect. Notably, the moduli of the dispersed HNTs and the surrounding interphase negligibly affect the modulus of the samples. Moreover, HNTs cannot reinforce the polymer medium when the HNT volume fraction is lower than 0.01 and the interphase depth is less than 5 nm.

Methyl Methacrylate (MMA) Treatment of Empty Fruit Bunch (EFB) to Improve the Properties of Regenerated Cellulose Biocomposite Films

The empty fruit bunch (EFB) regenerated cellulose (RC) biocomposite films for packaging application were prepared using ionic liquid. The effects of EFB content and methyl methacrylate (MMA) treatment of the EFB on the mechanical and thermal properties of the RC biocomposite were studied. The tensile strength and modulus of elasticity of the MMA treated RC biocomposite film achieved a maximum value when 2 wt% EFB was used for the regeneration process. The treated EFB RC biocomposite films also possess higher crystallinity index. The morphology analysis indicated that the RC biocomposite film containing MMA treated EFB exhibits a smoother and more homogeneous surface compared to the one containing the untreated EFB. The substitution of the –OH group of the EFB cellulose with the ester group of the MMA resulted in greater dissolution of the EFB in the ionic liquid solvent, thus improving the interphase bonding between the filler and matrix phase of the EF RC biocomposite. Due to this factor, thermal stability of the EFB RC biocomposite also successfully improved.

Anti-proliferative applications of laccase immobilized on super-magnetic chitosan-functionalized halloysite nanotubes

Owing to the ubiquitous availability and simple biocatalysis, the anti-proliferative laccase holds enormous opportunities for anti-cancer applications. However, accessing efficient and specific (super-magnetically targetable) new delivery system for anti-proliferative laccase is vital step towards laccase based anti-cancer approach. Therefore, in this investigation, super-magnetized (Fe₃O₄) and chitosan (CS) functionalized halloysite nanotubes (HNTs) (termed as Fe₃O₄-HNTs-CS) was facile synthesized. Further, laccase from Trametes versicolor was immobilized on Fe₃O₄-HNTs-CS (termed as Fe₃O₄-HNTs-CS-Lac). Then free laccase and Fe₃O₄-HNTs-CS-Lac were evaluated for anti-proliferative properties against cancer cell lines of liver (HepG2), lung (H460), cervix (Hela) and stomach (AGS). Laccase and Fe₃O₄-HNTs-CS-Lac gave significant cytotoxicity against all studied cancer cell lines. Moreover, the apoptosis analysis and FE-SEM morphology observations of cells support the anti-proliferative potential of laccase immobilized on Fe₃O₄-HNTs-CS. Therefore, investigated Fe₃O₄-HNTs-CS-Lac is natural and super-magnetic nano-biocatalyst, having the significant anti-proliferative potential and furthermore, Fe₃O₄-HNTs-CS can be used as efficient and specific delivery system for other anti-cancer enzymes.

Natural cellulose ionogels for soft artificial muscles

Rapid development of soft micromanipulation techniques for human friendly electronics has raised the demand for the devices to be able to carry out mechanical work on a micro- and macroscale. The natural cellulose-based ionogels (CEL-iGEL) hold a great potential for soft artificial muscle application, due to its flexibility, low driving voltage and biocompatibility. The CEL-iGEL composites undergo reversible bending already at ±500mV step-voltage values. A fast response to the voltage applied and high ionic conductivity of membranous actuator is achieved by a complete dissolution of cellulose in 1-ethyl-3-methylimidazolium acetate [EMIm][OAc]. The CEL-iGEL supported cellulose actuator films were cast out of cellulose-[EMIm][OAc] solution via phase inversion in H₂O. The facile preparation method ensured uniform morphology along the layers and stand for the high ionic-liquid loading in a porous cellulose scaffold. During the electromechanical characterization, the CEL-iGEL actuators showed exponential dependence to the voltage applied with the max strain difference values reaching up to 0.6% at 2 V. Electrochemical analysis confirmed the good stability of CEL-iGEL actuators and determined the safe working voltage value to be below 2.5V. To predict and estimate the deformation for various step input voltages, a mathematical model was proposed.

Structure, apatite inducing ability, and corrosion behavior of chitosan/halloysite nanotube coatings prepared by electrophoretic deposition on titanium substrate

In this study chitosan/halloysite nanotube composite (CS/HNT) coatings were deposited by electrophoretic deposition (EPD) on titanium substrate. Using HNT particles were investigated as new substituents for carbon nanotubes (CNTs) in chitosan matrix coatings. The ability of chitosan as a stabilizing, charging, and blending agent for HNT particles was exploited. Furthermore, the effects of pH, electrophoretic bath, and sonicating duration were studied on the deposition of suspensions containing HNT particles. Microstructure properties of coatings showed uniform distribution of HNT particles in chitosan matrix to form smooth nanocomposite coatings. The zeta potential results revealed that at pH around 3 there is an isoelectric point for HNT and it would have cathodic and anionic states at pH values less and more than 3, respectively. Therefore, CS/HNT composite deposits were produced in the pH range of 2.5 to 3. The apatite inducing ability of chitosan-HNT composite coating assigned that HNT particles were biocompatible because they formed carbonated hydroxyapatite particles on CS/HNT coating in corrected simulated body fluid (C-SBF). Finally, electrochemical corrosion characterizations determined that corrosion resistance in CS/HNT coating has been improved compared to bare titanium substrate.

Mechanical and Physical Properties of Sago Starch/Halloysite Nanocomposite Film

The incorporation of unmodified halloysite nanotube (HNT) in a thermoplastic sago starch (TPSS) film to form a nanocomposite material was investigated. The TPSS/HNT nanocomposite was fabricated through solvent casting method at varying HNT loading of 0, 0.25, 0.5, 1.0, 3.0, and 5.0 wt.%. Evaluation on mechanical and physical properties (tensile test, water absorption, thickness and density) was made to study the effect of HNT loading on the TPSS properties. Tensile strength achieved an optimum value at 0.25 wt.% of HNT loading and decreased with higher addition of HNT. Meanwhile higher amount of HNT in the nanocomposite film exhibited brittleness with the reduced tensile strain. Water absorption decreased with the addition of HNT due to the difficulty of water molecules to pass through the tortuous path of HNT structure. Thickness and density of the nanocomposite film, however, increased at higher HNT contents. FESEM (field emission scanning electron microscope) which examined the surface morphology of the TPSS/HNT nanocomposite displayed uniformly dispersed HNT in the plasticized starch matrix.