Preparation of TEMPO-oxidized cellulose/amino acid/nanosilver biocomposite film and its antibacterial activity

In situ synthesis of silver nanoparticles with controllable size distribution and high content in bagasse nanocellulose hydrogel

Developing an environment-friendly preparation method for silver nanoparticles (AgNPs) composite is significant. However, it remains challenges in size adjustment and content improvement of AgNPs. Here, the NaIO4 oxidation and TEMPO-mediated oxidation were applied to bagasse pulp to prepare nanocellulose (NC) with both carboxyl and aldehyde groups. The aldehyde content of NC could be adjusted in the range of 0.21-1.45 mmol/g by different NaIO4 oxidation times. When the carboxyl groups were protonated, NC with a high length-diameter ratio could construct stable hydrogels in a low concentration at 0.5 wt%. The NC hydrogels showed excellent in situ synthesis ability of AgNPs with abundant pore structure. By regulating the carboxyl group content of NC, the size distribution of synthesized AgNPs could be controlled in the range of 7.14-28.6 nm with high content of 6.79-11.0 %. The NC/AgNPs composite hydrogel exhibited high catalytic degradation activity for 4-nitrophenol and antibacterial activity. This approach for constructing NC hydrogel paves the way for AgNPs composite products with adjustable sizes and high contents.

Regioselective synthesis of polysaccharide-amino acid ester conjugates

Site-specific conjugation of polysaccharides with proteins is very challenging. Creating the ability to control chemo- and regioselective reaction between polysaccharides and amino acid derivatives can not only create potentially useful and bioactive natural polymer constructs, but should also provide useful guidance for the principles of polysaccharide-protein conjugate synthesis. In this work, we exploited regioselective bromination of the non-reducing end primary dextran hydroxyl using N-bromosuccinimide (NBS) and triphenylphosphine (Ph₃P) in the dimethylacetamide (DMAc) and lithium bromide solvent system, thereby enabling a regio- and chemoselective synthetic strategic approach to a variety of polysaccharide-amino acid ester adducts. We demonstrated selective condensation of the α-amino groups of esters of the amino acids tyrosine and proline, displacing the single, terminal C6 bromides of 6-BrDextran, as well as the 6-Br moieties of 6-BrCA320S, with high conversion (71-96%). Histidine ester side group amines were found to react with 6-BrCA320S, while those of tryptophan ester did not. These results provide useful access to polysaccharide-amino acid ester adducts of various architectures, and guide us in designing new pathways to polysaccharide-protein copolymers.

Modified Bacterial Cellulose Dressings to Treat Inflammatory Wounds

Natural products suited for prophylaxis and therapy of inflammatory diseases have gained increasing importance. These compounds could be beneficially integrated into bacterial cellulose (BC), which is a natural hydropolymer applicable as a wound dressing and drug delivery system alike. This study presents experimental outcomes for a natural anti-inflammatory product concept of boswellic acids from frankincense formulated in BC. Using esterification respectively (resp.) oxidation and subsequent coupling with phenylalanine and tryptophan, post-modification of BC was tested to facilitate lipophilic active pharmaceutical ingredient (API) incorporation. Diclofenac sodium and indomethacin were used as anti-inflammatory model drugs before the findings were transferred to boswellic acids. By acetylation of BC fibers, the loading efficiency for the more lipophilic API indomethacin and the release was increased by up to 65.6% and 25%, respectively, while no significant differences in loading could be found for the API diclofenac sodium. Post-modifications could be made while preserving biocompatibility, essential wound dressing properties and anti-inflammatory efficacy. Eventually, in vitro wound closure experiments and evaluations of the effect of secondary dressings completed the study.

Quantitative insight into dispersity and antibactericidal capability of silver nanoparticles noncovalently conjugated by polysaccharide-protein complexes

Precise prediction and measurement of dispersibility of silver nanoparticles (AgNPs) under atmospheric conditions are extremely vital for their potential commercial application. In the present work, the dispersibility of AgNPs capped by polysaccharide-protein from viscera of abalone (PSP-AgNPs) was studied using the combination of ultraviolet-visible spectroscopy (UV-vis), dynamic light scattering (DLS) and multiple-light-scattering (MLS) techniques. The results showed that the combination of UV/vis, DLS and MLS not only accurately determined the dispersibility of PSP-AgNPs, but also provided detailed information about the aggregation behavior of PSP-AgNPs. Furthermore, the results revealed a high dispersibility of PSP-AgNPs in the studied environment. The system temperature, pH value and thermal treatment (pasteurization and sterilization) had no effect on the dispersion of PSP-AgNPs in the effective concentration range against the pathogenic bacteria. Besides, an excellent stable dispersion and antibacterial activity against common pathogenic vibrio was also found in the dispersed PSP-AgNPs in seawater. Overall, the study provides a suitable method for the precise measurement of the dispersibility of AgNPs in environment. The AgNPs act as a potential bactericide with good dispersion and antibacterial activity in mariculture and other fields.

Evaluation of Acetaminophen Release from Biodegradable Poly (Vinyl Alcohol) (PVA) and Nanocellulose Films Using a Multiphase Release Mechanism

Biodegradable polymers hold great therapeutic value, especially through the addition of additives for controlled drug release. Nanocellulose has shown promise in drug delivery, yet usually requires chemical crosslinking with harsh acids and solvents. Nanocellulose fibrils (NFCs) and 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO)-mediated oxidized nanocellulose fibrils (TNFCs) with poly (vinyl alcohol) (PVA) could be aqueously formulated to control the release of model drug acetaminophen over 144 hours. The release was evaluated with a multiphase release mechanism to determine which mechanism(s) contribute to the overall release and to what degree. Doing so indicated that the TNFCs in PVA control the release of acetaminophen more than NFCs in PVA. Modeling showed that this release was mostly due to burst release-drug coming off the immediate surface, rather than diffusing out of the matrix.

An insight into nanocellulose as soft condensed matter: Challenge and future prospective toward environmental sustainability

Nanocellulose, a structural polysaccharide that has caught tremendous interests nowadays due to its renewability, inherent biocompatibility and biodegradability, abundance in resource, and environmental friendly nature. They are promising green nanomaterials derived from cellulosic biomass that can be disintegrated into cellulose nanofibrils (CNF) or cellulose nanocrystals (CNC), relying on their sensitivity to hydrolysis at the axial spacing of disordered domains. Owing to their unique mesoscopic characteristics at nanoscale, nanocellulose has been widely researched and incorporated as a reinforcement material in composite materials. The world has been consuming the natural resources at a much higher speed than the environment could regenerate. Today, as an uprising candidate in soft condensed matter physics, a growing interest was received owing to its unique self-assembly behaviour and quantum size effect in the formation of three-dimensional nanostructured material, could be utilised to address an increasing concern over global warming and environmental conservation. In spite of an emerging pool of knowledge on the nanocellulose downstream application, that was lacking of cross-disciplinary study of its role as a soft condensed matter for food, water and energy applications toward environmental sustainability. Here we aim to provide an insight for the latest development of cellulose nanotechnology arises from its fascinating physical and chemical characteristic for the interest of different technology holders.