A simple approach for morphology tailoring of alginate particles by manipulation ionic nature of polyurethanes

Recyclable and Degradable Ionic-Substituted Long-Chain Polyesters

Ionic groups can endow apolar polymers like polyethylene with desirable traits like adhesion with polar compounds. While ethylene copolymers provide a wide range of tunability via the carboxylate content and neutralization with different cations, they lack degradability or suitability for chemical recycling due to their all-carbon backbones. Here, we report ion-containing long-chain polyesters with low amounts of ionic groups (Mn = 50-60 kg/mol, <0.5 mol % of ionic monomers) which can be synthesized from plant oils and exhibit HDPE-like character in their structural and mechanical properties. In the sulfonic acid as well as neutralized sulfonate-containing polyesters, the nature of the cation counterions (Mg2+, Ca2+, and Zn2+) significantly impacts the mechanical properties and melt rheology. Acid-containing polyesters exhibit a relatively high capability to absorb water and are susceptible to abiotic degradation. Enhanced surface wettability is reflected by facilitation of printing on films of these polymers. Depolymerization by methanolysis to afford the neat long-chain monomers demonstrates the suitability for chemical recycling. The surface properties of the neutralized sulfonate-containing polyesters are enhanced, showing a higher adsorption capability. Our findings allow for tuning the properties of recyclable polyethylene-like polymers and widen the scope of these promising materials.

Preparation and properties of environmentally benign waterborne polyurethane composites from sodium-alginate-modified nano calcium carbonate

Well-dispersed inorganic nanoparticles in organic polymers are critical in the preparation of high-performance nanocomposites. This study prepared a series of waterborne polyurethane (WPU)/calcium carbonate nanocomposites using the solution blending method. Next, FT-IR, TG-DTG and XRD tests were carried out to confirm that the biopolymer sodium alginate (SA) was successfully encapsulated on the surface of the calcium carbonate nanoparticles, and that SA achieved satisfactory surface modification of the calcium carbonate nanoparticles. The Zeta and ultraviolet (UV) absorbance test results reveal that SA-modified nano calcium carbonate (MCC) had good dispersion stability in water. The effects of the MCC dosage on the composite mechanical properties, thermal stability, and cross-sectional morphology observed by scanning electron microscopy, and the water resistance of the nanocomposite were investigated. The results reveal that the incorporation of 3wt% of MCC in WPU had stable distribution, which led to a 54% increase in the tensile strength of the nanocomposite, while maintaining excellent elongation at break (2187%) and increasing the maximum decomposition temperature to 419.6 °C. Importantly, the improved water resistance facilitates the application of this environmentally benign composite material in humid environments.

Biocompatibility and Hemolytic Activity Studies of Synthesized Alginate-Based Polyurethanes

Many investigators have focused on the development of biocompatible polyurethanes by chemical reaction of functional groups contained in a spacer and introduced in the PU backbone or by a grafting method on graft polymerization of functional groups. In this study, alginate-based polyurethane (PU) composites were synthesized via step-growth polymerization by the reaction of hydroxyl-terminated polybutadiene (HTPB) and hexamethylene diisocyanate (HMDI). The polymer chains were further extended with blends of 1,4-butanediol (1,4-BDO) and alginate (ALG) with different mole ratios. The structures of the prepared PU samples were elucidated with FTIR and 1H NMR spectroscopy. The crystallinity of the prepared samples was evaluated with the help of X-ray diffraction (XRD). The XRD results reveal that the crystallinity of the PU samples increases when the concentration of alginate increases. Thermogravimetric (TGA) results show that samples containing a higher amount of alginate possess higher thermal stability. ALG-based PU composite samples show more biocompatibility and less hemolytic activity. Mechanical properties, contact angle, and water absorption (%) were also greatly affected.

Starch-based isocyanate- and non-isocyanate polyurethane hybrids: A review on synthesis, performance and biodegradation

The challenges related to the persistence of plastics in natural ecosystems fostered strong interest in developing biodegradable bioplastics. Among natural biopolymers, starch gained both academic and industrial interest owing to its impressive physicochemical properties. The use of starch in production of polyurethane (PU) composites not only yields PUs with outstanding mechanical properties but also makes the final PU products biodegradable. The hydrophilic nature of starch limits its dispersion in hydrophobic PU polymers, although it is a significant benefit in creating starch-embedded non-isocyanate polyurethane (NIPU) composites. We present a comprehensive overview to highlight important strategies that are used to improve the compatibility of starch with various PU matrices. This review also gives an overview of the recent advances in the synthesis of starch-NIPU hybrids. Moreover, we aim to deliver critical insight into strategies that boost the biodegradation characteristics of PUs along with a discussion on various methods to assess their biodegradation.

Assessment of the Efficacy of Tributylammonium Alginate Surface-Modified Polyurethane as an Antibacterial Elastomeric Wound Dressing for both Noninfected and Infected Full-Thickness Wounds

Risk factors of nonhealing wounds include persistent bacterial infections and rapid onset of dehydration; therefore, wound dressings should be used to accelerate the healing process by helping to disinfect the wound bed and provide moisture. Herein, we introduce a transparent tributylammonium alginate surface-modified cationic polyurethane (CPU) wound dressing, which is appropriate for full-thickness wounds. We studied the physicochemical properties of the dressing using Fourier transform infrared, ¹H NMR, and ¹³C NMR spectroscopies and scanning electron microscopy, energy-dispersive X-ray, and thermomechanical analyses. The surface-modified polyurethane demonstrated improved hydrophilicity and tensile Young's modulus that approximated natural skin, which was in the range of 1.5-3 MPa. Cell viability and in vitro wound closure, assessed by MTS and the scratch assay, confirmed that the dressing was cytocompatible and possessed fibroblast migratory-promoting activity. The surface-modified CPU had up to 100% antibacterial activity against Staphylococcus aureus and Escherichia coli as Gram-positive and Gram-negative bacteria, respectively. In vivo assessments of both noninfected and infected wounds revealed that the surface-modified CPU dressing resulted in a faster healing rate because it reduced the persistent inflammatory phase, enhanced collagen deposition, and improved the formation of mature blood vessels when compared with CPU and commercial Tegaderm wound dressing.

Polyurethane nanomicelles: a novel eco-friendly and efficient polymeric ionic solvent for the Cannizzaro reaction

The Cannizzaro reaction is performed under very mild alkaline conditions using anionic polyurethane nanomicelles as a novel reusable polymeric ionic solvent.

Alginic acid: a highly efficient renewable and heterogeneous biopolymeric catalyst for one-pot synthesis of the Hantzsch 1,4-dihydropyridines

Alginic acid was found to be an efficient, environmentally benign, easily recoverable and low-cost catalyst for clean synthesis of 1,4-dihydropiridine derivatives (DHPs).