Multivariate analysis for resolving interactions of carbidopa with dsDNA at a fullerene-C60/GCE

Chemometrics-assisted electrochemical biosensing of cholesterol as the sole precursor of steroids by a novel electrochemical biosensor

This project was performed with the aims of increasing the sensitivity of differential pulse voltammetry (DPV) which itself is a sensitive electroanalytical technique, and also to compare the area under peak (univariate calibration), height of peak (univariate calibration) and whole of vector (multivariate calibration) for calibration purposes. These topics were investigated by fabrication of a novel electrochemical biosensor for determination of cholesterol (CHO). The procedure used in this project was based on the synthesis of molecularly imprinted polymers (MIPs) to the preconcentration of CHO and its biosensing by a rotating glassy carbon electrode (GCE) modified by co-immobilization of cholesterol oxidase (CO), cholesterol esterase (CE) and horseradish peroxidase (HP) onto multiwalled carbon nanotubes-ionic liquid (COCEHP/MWCNTs-IL/GCE). The results showed that the hydrodynamic DPV (HYDPV) was much more sensitive than DPV and using the area under peak for univariate calibration purposes was more suitable than height of peak. Adsorption at the electrode surface is an important trouble which affects the height and position of voltammetric peaks, but the area under peak is not affected by adsorption therefore, it can be more suitable for univariate calibration purposes. The biosensor response was also calibrated by chronoamperometry and the results confirmed that the HYDPV was more sensitive than chronoamperometry. The next attempt was based on recording the biosensor responses based on second-order HYDPV data and modeling of them (whole of vectors) by three-way calibration methods which showed the best performance among the tested methods for determination of CHO. The biosensor response was long-term stable, repeatable and reproducible which was successfully applied to the analysis of serum sample towards determination of CHO whose results were comparable with a reference method.

Sensitive and selective simultaneous biosensing of nandrolone and testosterone as two anabolic steroids by a novel biosensor assisted by second-order calibration

Recently, our research group have focused on an interesting project in which a novel dual template molecularly imprinted (DTMIP) biosensor was fabricated and assisted by second-order differential pulse voltammetric (DPV) data for simultaneous determination of nandrolone decanoate (ND) and testosterone decanoate (TS). An indium tin oxide (ITO) was modified with multiwalled carbon nanotubes-graphene-ionic liquid (MWCNT-Gr-IL) and then, the fullerene C₆₀ was casted onto the surface of MWCNT-Gr-IL/ITO and electrochemically reduced. Finally, DTMIPs were electrosynthesized by electropolymerization of 4-aminobenzoic acid (ABA) as monomer with ND and TS as template molecules to obtain the final structure of the biosensor (DTMIP/C₆₀/MWCNT-Gr-IL/ITO). Structure of the biosensor was electrochemically and microscopically characterized. The ND and TS generated two severely overlapped DPVs at the surface of the biosensor which forced us to assist the biosensor with three-way calibration by second-order DPV data to simultaneous determine them. Two second-order algorithms including multivariate curve resolution alternating least squares (MCR-ALS) and parallel factor analysis2 (PARAFAC2) were used to build second-order calibration models and evaluation of their performance in the analysis of synthetic samples showed more superiority of the MCR-ALS than PARAFC2 which motivated us to select PARAFC2 for the analysis of urine samples as real cases. Application of the biosensor assisted by PARAFC2 for the analysis of urine samples towards simultaneous determination of ND and TS was successful.

Introducing an interesting and novel strategy based on exploiting first-order advantage from spectrofluorimetric data for monitoring three toxic metals in living cells

In this work, we did our best to develop a novel and interesting analytical method based on coupling of spectrofluorimetry with first-order multivariate calibration techniques for simultaneous determination of lead (Pd), zinc (Zn) and cadmium (Cd) in HeLa cells. To achieve this goal, quenching of the emission of graphene (GR) was individually investigated in the presence of Pb, Zn and Cd and then, according to the linear ranges obtained from individual calibration graphs, a multivariate calibration model was developed based on modeling of the quenching of the emission of GR in the presence of the mixtures of Pb, Zn and Cd. First-order multivariate calibration models were constructed by partial least squares (PLS), principal component regression (PCR), orthogonal signal correction-PLS (OSC-PLS), continuum power regression (CPR), robust continuum regression (RCR) and partial robust M-regression (PRM) and their performances were evaluated and statistically compared. Finally, the OSC-PLS was chosen as the best model with the best practical performance for analytical purposes.

Resolving interactions of miglitol with normal and glycated human serum albumin by multivariate methods

This article reports results of one of our projects related to the investigation of interactions of miglitol (MIG) with normal human serum albumin (HSA) and glycated HSA (GHSA) with the help of recording spectroscopic and electrochemical data. The experimental data were analyzed by conventional and chemometric methods to extract useful information for comprehensive justifications of the interactions of the MIG with HSA and GHSA. Hard- and soft-modeling chemometric methods were used to extract quantitative and qualitative information. Then, molecular docking techniques were used to further investigation of the binding of the MIG with HSA and GHSA and the extracted results were compatible with those obtained by experimental methods. Finally, according to the binding of the BV with HSA and GHSA, second-order differential pulse voltammetric data were recorded and calibrated with three-way calibration methods for exploiting second-order advantage for determination of the GHSA in the presence of the HSA to develop a novel chemometrics assisted-electroanalytical method for diagnostic and monitoring of diabetic.

DNA-binding activities of compounds acting as enzyme inhibitors, ion channel blockers and receptor binders

The DNA-binding activities of compounds used as remedies can display DNA-protection, but also damaging effects in biological systems. The current review compiles literature data on DNA-binding activities of drugs widely used as remedies with different therapeutic indications. The compounds are classified according their mechanism of action: enzyme inhibitors, ion channel inhibitors, inhibitors of viral RNA replication and HIV protease and receptor agonists. DNA binding was reported for such widely used drugs as paracetamol, aspirin, metformin, statins and many others. The capability of the drug to bind DNA is sometimes coupled to genotoxic effects, but in some cases - to genome protection. Data on atoms and chemical groups involved in the drug-DNA interactions are also presented. In many cases the same atoms are involved in both interactions of the compounds with proteins and DNA.

Chemometrics in investigation of small molecule-biomacromolecule interactions: A review

Chemometrics is chemical discipline in which mathematical and statistical methods are coupled with chemical data to extract useful information which cannot be extracted by the use of conventional methods. When experimental techniques are assisted by chemometric methods, very interesting studies will be performed which enable us to obtain valuable information about the system under our study. Chemico-biological interactions are very useful studies which are performed to obtain information about binding of small molecules with biological macromolecules. Recently, these studies have been assisted by chemometric methods to perform advanced studies which can help us to have a deep insight to them. Literature survey showed us that multivariate analysis of the chemico-biological interactions is becoming popular and nowadays, chemometricians are using multivariate chemometric methods for resolving chemico-biological interactions. This article focuses on the works published in the literature to provide a background for those who are interested to work in this field and finally, the results will be discussed and concluded.

Chemometric modeling of the electrochemical data to investigate proline cis/trans isomeration effect on aggregation of Tau protein

Tau protein (Tau) is a proline-rich protein and in this work, we have developed a very interesting strategy based on combination of electrochemistry with chemometric methods to investigate proline cis/trans isomeration effect on the Tau aggregation. To achieve this goal, the proline residues at RTPPK motif have been replaced by alanine to generate RTPAK, RTAPK and RTAAK mutants of the Tau. Then, cyclic voltammetric (CV) responses of the Tau and RTPAK, RTAPK and RTAAK as its mutants in the presence of heparin (HEP) as an anionic inducing agent which could trigger aggregation of the Tau were recorded at physiological conditions every hour during 12 h. Therefore, 48 data sets of titrations were obtained which were handled by chemometric methods to extract useful information about aggregation of the Tau. The data were hard-modeled by EQUISPEC, SQUAD, REACTLAB and SPECFIT to extract useful quantitative information. Our results confirmed that the strength of the binding of the HEP with proteins was obeyed from Tau > RTPAK ~ RTAPK > RTAAK which confirmed that the aggregation of the proteins was obeyed from this order as well. Therefore, aggregation of the Tau is decreased by transforming Cis isomer to Trans even in the presence of an anionic inducing agent such as HEP which may have value for the treatment of Alzheimer's disease.

An elegant technology for ultrasensitive impedimetric and voltammetric determination of cholestanol based on a novel molecularly imprinted electrochemical sensor

In this work, a novel molecularly imprinted electrochemical sensor (MIES) has been fabricated based on electropolymerization of a molecularly imprinted polymer (MIP) onto a glassy carbon electrode (GCE) modified with gold-palladium alloy nanoparticles (AuPd NPs)/polydopamine film (PDA)/multiwalled carbon nanotubes-chitosan-ionic liquid (MWCNTs-CS-IL) for voltammetric and impedimetric determination of cholestanol (CHO). Modifications applied to the bare GCE formed an excellent biocompatible composite film which was able to selectively detect CHO molecules. Modifications applied to the bare GCE were characterized by scanning electron microscopy (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (SEM). Under optimal experimental conditions, the sensor was able to detect CHO in the range of 0.1-60 pM and 1-50 pM by EIS and DPV, respectively. Moreover, the sensor showed high sensitivity, selectivity, repeatability, reproducibility, low interference and good stability towards CHO determination. Our records confirmed that the sensor was successfully able to the analysis real samples for determination of CHO.

A Review of Theranostics Applications and Toxicities of Carbon Nanomaterials

BACKGROUND

In the last few years, the use of modified Carbon Nanomaterials (CNMs) for theranostics (therapeutic and diagnosis) applications is a new and rapidly growing area in pharmacy and medical fields. Owing to this, their specific physicochemical behaviors like high stability, drug loading, surface area to volume ratio, with low toxicity and immunogenicity are mainly responsible to be considered those as smart nanomaterials.

OBJECTIVES

This review describes the different dimensions of carbon-based nanocarriers including 0-D fullerene, 1-D Carbon Nanotubes (CNTs), and 2-D graphene and Graphene Oxide (GO) and their surface modification with different biocompatible and biodegradable molecules via covalent or non-covalent functionalization. The major focus of this article is on the different theranostics applications of CNMs like targeted drugs and genes delivery, photodynamic therapy, photothermal therapy, bioimaging, and biosensing. The therapeutic efficacy of drugs could be enhanced by delivering them directly on a specific site using different targeted ligands such as vitamins, peptide, carbohydrates, proteins, etc. A section of the article also discusses the toxicity of the CNMs to the living systems.

CONCLUSIONS

In brief, this review article discusses the numerous theranostics applications and toxicities of CNMs.

Developing an elegant and integrated electrochemical-theoretical approach for detection of DNA damage induced by 4-nonylphenol

In this work, a novel biosensor was fabricated for detection of DNA damage induced by 4-nonylphenol (NP) and also determination of NP. To achieve this goal, a glassy carbon electrode (GCE) was modified with chitosan (Chit), gold nanoparticles (Au NPs) and DNA-multiwalled carbon nanotubes (DNA-MWCNTs). Then, the DNA-MWCNTs/Au NPs/Chit/GCE was incubated with methylene blue (MB) to obtain MB-DNA-MWCNTs/Au NPs/Chit/GCE in which MB was used as the redox indicator. The modifications applied to the GCE were characterized by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopic (EDS) and theoretical evidence. MB is a derivative of anthraquinone which can intercalate into double helix structure of DNA. By treating MB-DNA-MWCNTs/Au NPs/Chit/GCE with NP, a higher R _ct was observed because the insertion of the NP may result in a more negative charge environment on the DNA surface which hinders accessibility of [Fe(CN)₆]^3-/4- anion to the electrode surface. Change in the EIS response of the biosensor in the presence of NP was used to develop a novel system for monitoring the DNA damage induced by NP. The EIS technique was also used to develop a sensitive electroanalytical method for determination of NP.

Matrix augmentation as an efficient method for resolving interaction of bromocriptine with human serum albumin: trouble shooting and simultaneous resolution

This work reports the results of an interesting study related to the investigation of interactions of bromocriptine (BCP) with human serum albumin (HSA) by mathematicall modelling of voltammetric and spectroscopic data into an augmented data matrix and its resolution by multivariate curve resolution-alternating least squares (MCR-ALS). The quality of the results obtained by MCR-ALS was examined by MCR-BANDS and its outputs confirmed the absence of rotational ambiguities in the MCR-ALS results. BCP-HSA interactions were also modeled by molecular docking methods to verify the results obtained from experimental sections and fortunately, they were compatible. Hard modeling of the experimental data by EQUISPEC helped us to calculate the binding constant of the complex formed from BCP-HSA interactions which was in a good agreement with that of calculated from direct analysis of the experimental data. Finally, with the help of two different amperometric measurements based on BCP-HSA interactions a novel electroanalytical method was developed for biosensing of HSA in serum samples.

Fabrication of a novel impedimetric biosensor for label free detection of DNA damage induced by doxorubicin

In this work, a novel impedimetric biosensor has been fabricated for detection of DNA damage induced by doxorubicin (DX). Cytochrome P450 reductase (CPR) is required for electron transfer from nicotinamide adenine dinucleotide phosphate (NADPH) to cytochrome P450 (CP450) which causes DX to undergo a one-electron reduction of the p-quinone residue to form the semiquinone radical resulting in the generation of free hydroxyl radical which causes DNA damage. After modification of bare glassy carbon electrode (GCE) with multiwalled carbon nanotubes (MWCNTs) and chitosan (Ch), CPR and CP450 were co-immobilized onto the surface of Ch/MWCNTs/GCE by cross-linking CPR, CP450 and Ch through addition of glutaraldehyde. Then, the DNA was assembled onto the surface of CPRCP450/Ch/MWCNTs/GCE to fabricate the biosensor (DNA/CPRCP450/Ch/MWCNTs/GCE). Modifications applied to the bare GCE to fabricate the biosensor were characterized by CV, EIS and SEM. The DNA/CPRCP450/Ch/MWCNTs/GCE was treated in the damaging solution (DX + NADPH) which caused a significant DNA damage and the exposed DNA bases reduced the electrostatic repulsion of the negatively charged redox probe leading to Faradaic impedance changes. Performance of the biosensor for detection of DNA damage in the presence of Spinach extract was also examined and finally, an indirect impedimetric method was developed for determination of DX.

Simultaneous co-immobilization of three enzymes onto a modified glassy carbon electrode to fabricate a high-performance amperometric biosensor for determination of total cholesterol

In this work, we have fabricated a novel amperometric cholesterol (CHO) biosensor because of the importance of determination of CHO levels in blood which is an important parameter for diagnosis and prevention of disease. To achieve this goal, cholesterol oxidase, cholesterol esterase and horseradish peroxidase were simultaneously co-immobilized onto a glassy carbon electrode (GCE) modified with gold nanoparticles/chitin-ionic liquid/poly(3,4-ethylenedioxypyrrole)/graphene-multiwalled carbon nanotubes-1,1'-ferrocenedicarboxylic acid-ionic liquid. Modifications applied to the bare GCE were characterized by cyclic voltammetry, electrochemical impedance spectroscopy and scanning electron microscopy. The biosensor detected CHO in linear ranges of 0.1-25 μM and 25-950 μM with a detection limit of 0.07 μM. The sensitivity of the biosensor was estimated to be 6.6 μA μM^-1 cm^-2, its response time was <5 s and Michaelis-Menten constant was calculated to be 0.12 μM. Results obtained in this study revealed that the biosensor was selective, sensitive, stable, repeatable and reproducible. Finally, the biosensor was successfully applied to the determination of CHO levels in rats plasma.

Electrochemical detection of interaction between capsaicin and nucleic acids in comparison to agarose gel electrophoresis

In this study, the biomolecular interaction occurred between nucleic acids and Capsaicin (CPS), the active compound in chilli peppers, which has been reported to have anti-carcinogenic properties, was investigated for the first time herein using disposable electrochemical biosensor. It is aimed to perform the surface-confined interaction between CPS and different types of nucleic acids and under this aim, the experimental conditions were optimized; such as, the concentration of CPS and DNA, DNA immobilization time and interaction time etc. The detection limit of DNA was estimated based on guanine oxidation signal in the linear concentration range of DNA from 1 to 5 μg/mL, and it was found to be 0.62 μg/mL. The effect of time-dependent manner from 1 min to 30 min on the interaction of CPS with nucleic acids was explored upon to the changes at guanine signal coming from double stranded DNA and cDNA as well as PCR samples. The interaction of CPS with double stranded DNA was also determined by agarose gel electrophoresis.

Recent Advances in Electrochemical Biosensors Based on Fullerene-C60 Nano-Structured Platforms

Nanotechnology is becoming increasingly important in the field of (bio)sensors. The performance and sensitivity of biosensors is greatly improved with the integration of nanomaterials into their construction. Since its first discovery, fullerene-C60 has been the object of extensive research. Its unique and favorable characteristics of easy chemical modification, conductivity, and electrochemical properties has led to its tremendous use in (bio)sensor applications. This paper provides a concise review of advances in fullerene-C60 research and its use as a nanomaterial for the development of biosensors. We examine the research work reported in the literature on the synthesis, functionalization, approaches to nanostructuring electrodes with fullerene, and outline some of the exciting applications in the field of (bio)sensing.