Carboxymethyl cellulose/silica hybrids as templates for calcium phosphate biomimetic mineralization

Applications of propolis-based materials in wound healing

Due to its excellent antiseptic efficacy and antimicrobial properties, propolis has shown attractive advantages in wound dressings. However, an inclusive review of the propolis-based materials as a wound dressing is still lacking. The current short review summarizes the skin wound healing process, relates evaluation parameters, and then reviews the refined propolis-based materials dressings such as antimicrobial property, adhesion and hemostasis, anti-inflammatory and substance delivery. The approaches implemented to achieve these functions are classified and discussed. Furthermore, applications of propolis wound dressing for treating different types of wounds such as heal wounds, burns, and ulcers are presented. The future directions of propolis-based wound dressings for wound healing are further proposed. This review showed that propolis-based materials might be a promising new dressing for wound occlusion and tissue repairing.

Preparation of High Mechanical Strength Chitosan Nanofiber/NanoSiO2/PVA Composite Scaffolds for Bone Tissue Engineering Using Sol-Gel Method

The majority of chitosan-based bone tissue engineering (BTE) scaffolds have the problem of poor mechanical properties. However, modifying chitosan with conventional silane coupling agents to improve the mechanical properties of scaffolds will introduce additional complications, including cytotoxicity and poor biocompatibility. In this study, two types of organic−inorganic composite scaffolds (F-A-T0/T3/T5 and F-B-T5-P0/P0.5/P1.5/P2.5) were prepared using chitosan nanofibers (CSNF) prepared by the beating-homogenization method, combined with the sol−gel method, and further introduced polyvinyl alcohol (PVA). The F-A-T3 and F-B-T5-P1.5 exhibited interconnected pore and surface nanofibers structures, high porosity (>70%), outstanding swelling properties, and a controllable degradation rate. The Young’s modulus of TEOS: 5.0% (w/w), PVA: 1.5% (w/w) chitosan fiber scaffold is 8.53 ± 0.43 MPa in dry conditions, and 237.78 ± 8.86 kPa in wet conditions, which is four times that of F-A-T5 and twice that of F-B-T5-P0. Additionally, cell (MC3T3-E1) experiments confirmed that the two composite scaffolds had great cytocompatibility and were predicted to be used in the future in the field of BTE scaffolds.

Mineralized Polyvinyl Alcohol/Sodium Alginate Hydrogels Incorporating Cellulose Nanofibrils for Bone and Wound Healing

Bio sustainable hydrogels including tunable morphological and/or chemical cues currently offer a valid strategy of designing innovative systems to enhance healing/regeneration processes of damaged tissue areas. In this work, TEMPO-oxidized cellulose nanofibrils (T-CNFs) were embedded in alginate (Alg) and polyvinyl alcohol (PVA) solution to form a stable mineralized hydrogel. A calcium chloride reaction was optimized to trigger a crosslinking reaction of polymer chains and mutually promote in situ mineralization of calcium phosphates. FTIR, XRD, SEM/EDAX, and TEM were assessed to investigate the morphological, chemical, and physical properties of different mineralized hybrid hydrogels, confirming differences in the deposited crystalline nanostructures, i.e., dicalcium phosphate dehydrate (DCPDH) and hydroxyapatite, respectively, as a function of applied pH conditions (i.e., pH 4 or 8). Moreover, in vitro tests, in the presence of HFB-4 and HSF skin cells, confirmed a low cytotoxicity of the mineralized hybrid hydrogels, and also highlighted a significant increase in cell viability via MTT tests, preferentially, for the low concentration, crosslinked Alg/PVA/calcium phosphate hybrid materials (<1 mg/mL) in the presence of hydroxyapatite. These preliminary results suggest a promising use of mineralized hybrid hydrogels based on Alg/PVA/T-CNFs for bone and wound healing applications.

Sustainable hybrid silica extracted from rice husk with polyvinyl alcohol and nicotinic acid as multi adsorbent for textile wastewater treatment

A new eco-friendly compound was prepared for the treatment of textile wastewater containing mixed dyes with various ranges of toxicity. Porous silica was extracted from a black liquor by-product using a simple method and characterized by porous morphology (the pore size ranged between 12 and 41 nm). The silica is the main corrosive agent present in the black liquor; thus, the extraction of silica from the black liquor was considered detoxification process. The extracted porous silica was used as a precursor material to prepare the hybrid material based on polyvinyl alcohol (PVA) as a binder polymer and functionalized by nicotinic acid. The multifunction prepared hybrid was characterized by FT-IR, TGA, DTGA, SEM, and EDX. The porous size of the prepared hybrid varied from 96 nm to 620 nm and presents a high thermal stability in comparison with its parent materials. The adsorption of cationic and anionic dyes was carried out. The adsorption kinetics parameters were fitted with pseudo-first-order and pseudo-second-order kinetic models for methyl orange (MO) and methylene blue (MB), respectively. The adsorption parameters indicated that the Langmuir model is better to describe the adsorption of dyes on the hybrid material. The maximum adsorption capacity was 484 and 771 mg/g for MO and MB, respectively.

Soy protein hydrolysate grafted cellulose nanofibrils with bioactive signals for bone repair and regeneration

TEMPO oxidized cellulose nanofibers (T-CNF) were prepared from cellulose pulp which is extracted from bagasse. Soy protein hydrolysate (SPH) was grafted on T-CNF via amidation of carboxylic groups. Biomineralization was, then, assessed via calcium phosphates (CaP) precipitation in twice-simulated body fluid until formation of a new bioactive material. Protein was efficiently grafted without alteration of morphology and nanofibrils packing as reported by Fourier Transform infrared analysis /X Ray Diffraction /Scanning and Transmission Electron Microscopy / Atomic Force Microscopy. Highly crystalline calcium phosphate deposits - ca. 22.1% - were detected, with a Ca/P ratio equal to 1.63, in agreement with native bone apatite composition. In vitro response of human Mesenchymal Stem Cells confirmed the biocompatibility. No significant differences in terms of cell adhesion were recognized while a significant increase in cell proliferation was detected until 7 days. The presence of calcium phosphates tends to cover the nanofibrillar pattern, inducing the inhibition of cell proliferation and promoting the ex-novo precipitation of mineral phases. All the results suggest a promising use of these biomaterials in the repair and/or the regeneration of hard tissues such as bone.

Bone Regeneration Using a Three-Dimensional Hexahedron Channeled BCP Block Combined with Bone Morphogenic Protein-2 in Rat Calvarial Defects

It is important to obtain sufficient bone mass before implant placement on alveolar bone, and synthetic bone such as biphasic calcium phosphate (BCP) has been studied to secure this. This study used a BCP block bone with a specific structure of the three-dimensional (3D) hexahedron channel and coating with recombinant human bone morphogenetic protein-2 (rhBMP-2) impregnated carboxymethyl cellulose (CMC) was used to examine the enhancement of bone regeneration of this biomaterial in rat calvarial defect. After the preparation of critical-size calvarial defects in fifteen rats, defects were divided into three groups and were implanted with the assigned specimen (n = 5): Boneplant (untreated 3D hexahedron channeled BCP block), Boneplant/CMC (3D hexahedron channeled BCP block coated with CMC), and Boneplant/CMC/BMP (3D hexahedron channeled BCP block coated with CMC containing rhBMP-2). After 4 weeks, the volumetric, histologic, and histometric analyses were conducted to measure the newly formed bone. Histologically, defects in the Boneplant/CMC/BMP group were almost completely filled with new bone compared to the Boneplant and Boneplant/CMC groups. The new bone volume (P < 0.05) and area (P < 0.001) in the Boneplant/CMC/BMP group (20.12% ± 2.17, 33.79% ± 3.66) were much greater than those in the Boneplant (10.77% ± 4.8, 16.48% ± 9.11) and Boneplant/CMC (10.72% ± 3.29, 16.57% ± 8.94) groups, respectively. In conclusion, the 3D hexahedron channeled BCP block adapted rhBMP-2 with carrier CMC showed high possibility as an effective bone graft material.

Biomimetic Mineralization of Three-Dimensional Printed Alginate/TEMPO-Oxidized Cellulose Nanofibril Scaffolds for Bone Tissue Engineering

The three-dimensional (3D) printed scaffolds were prepared by partial cross-linking of TEMPO-oxidized cellulose nanofibril/alginate hydrogel using calcium ions for printing the hydrogel while maintaining its shape, fidelity, and preventing the collapse of the filaments. The prepared scaffolds were fully cross-linked using calcium ions immediately after printing to provide the rigidity of the hydrogel and give it long-term stability. The composition of the prepared pastes was adjusted in view of the description of the hydrogel and 3D printing parameters. The rheological properties in terms of thixotropic behavior and viscosity recovery of hydrogels were investigated by performing steady shear rate experiments. The results show that the viscosity recovery for pure alginate hydrogel was only about 16% of the initial value, whereas it was 66% when adding cellulose nanofibrils to alginate. Consequently, the shape of the pure alginate scaffold was soft and easy to collapse contrarily to the composite scaffold. The biomimetic mineralization process of printed scaffolds using simulated body fluid, mimicking the inorganic composition of human blood plasma, was performed and the hydroxyapatite nucleation on the hydrogel was confirmed. The strength properties of the fabricated scaffolds in terms of compressive strength analysis were also investigated and discussed. The results show that the alginate/TEMPO-oxidized cellulose nanofibril system may be a promising 3D printing scaffold for bone tissue engineering.

Controlled release of antibiotic amoxicillin drug using carboxymethyl cellulose-cl-poly(lactic acid-co-itaconic acid) hydrogel

In this paper, microwave assisted preparation of carboxymethyl cellulose-cl-poly(lactic acid-co-itaconic acid) (CMC-cl-P(LA-co-IA)) hydrogel was reported via facile graft copolymerization using N,N¹-methylene-bis-acrylamide (MBA) and potassium persulphate as cross linker and initiator. Different reaction parameters were optimized to achieve good yield. The formation of hydrogel was confirmed by characterization techniques such as Fourier transform infrared spectroscopy, field emission scanning electron microscopy, X-ray diffraction, thermo gravimetric analysis, transmission electron microscopy etc. The antimicrobial activities of the hydrogel were studied against Staphylococcus aureus and Escherichia coli. About 95% killing of bacteria was recorded after 24h. The controlled release of amoxicillin drug from hydrogel was evaluated as a function of pH and time. Maximum drug release of 98% was recorded at 2.2 pH after 7h. The kinetic studies showed non-Fickian diffusion of the drug.

The Effect of Bisphasic Calcium Phosphate Block Bone Graft Materials with Polysaccharides on Bone Regeneration

In this study, bisphasic calcium phosphate (BCP) and two types of polysaccharide, carboxymethyl cellulose (CMC) and hyaluronic acid (HyA), were used to fabricate composite block bone grafts, and their physical and biological features and performances were compared and evaluated in vitro and in vivo. Specimens of the following were prepared as 6 mm diameter, 2 mm thick discs; BPC mixed with CMC (the BCP/CMC group), BCP mixed with crosslinked CMC (the BCP/c-CMC group) and BCP mixed with HyA (the BCP/HyA group) and a control group (specimens were prepared using particle type BCP). A scanning electron microscope study, a compressive strength analysis, and a cytotoxicity assessment were conducted. Graft materials were implanted in each of four circular defects of 6 mm diameter in calvarial bone in seven rabbits. Animals were sacrificed after four weeks for micro-CT and histomorphometric analyses, and the findings obtained were used to calculate new bone volumes (mm³) and area percentages (%). It was found that these two values were significantly higher in the BCP/c-CMC group than in the other three groups (p < 0.05). Within the limitations of this study, BCP composite block bone graft material incorporating crosslinked CMC has potential utility when bone augmentation is needed.

Carboxymethyl cellulose enables silk fibroin nanofibrous scaffold with enhanced biomimetic potential for bone tissue engineering application

Novel silk fibroin (SF) and carboxymethyl cellulose (CMC) composite nanofibrous scaffold (SFC) were developed to investigate their ability to nucleate bioactive nanosized calcium phosphate (Ca/P) by biomineralization for bone tissue engineering application. The composite nanofibrous scaffold was prepared by free liquid surface electrospinning method. The developed composite nanofibrous scaffold was observed to control the size of Ca/P particle (≤100nm) as well as uniform nucleation of Ca/P over the surface. The obtained nanofibrous scaffolds were fully characterized for their functional, structural and mechanical property. The XRD and EDX analysis depicted the development of apatite like crystals over SFC scaffolds of nanospherical in morphology and distributed uniformly throughout the surface of scaffold. Additionally, hydrophilicity as a measure of contact angle and water uptake capacity is higher than pure SF scaffold representing the superior cell supporting property of the SF/CMC scaffold. The effect of biomimetic Ca/P on osteogenic differentiation of umbilical cord blood derived human mesenchymal stem cells (hMSCs) studied in early and late stage of differentiation shows the improved osteoblastic differentiation capability as compared to pure silk fibroin. The obtained result confirms the positive correlation of alkaline phosphatase activity, alizarin staining and expression of runt-related transcription factor 2, osteocalcin and type1 collagen representing the biomimetic property of the scaffolds. Thus, the developed composite has been demonstrated to be a potential scaffold for bone tissue engineering application.