Synthesis, characterization and applications of N- quaternized chitosan/poly(vinyl alcohol) hydrogels

Ag/Au-incorporated trimethyl chitosan-shell hybrid particles as reinforcing and antioxidant fillers for trimethyl chitosan hydrogel

N,N,N-Trimethyl chitosan (TMC) is a quaternized chitosan with versatile biological features. However, low mechanical strength limits its uses, for example, as hydrogels for tissue engineering applications. This study illustrates a viable synthesis of metal/polymer hybrid, core-shell colloidal particles and their use as reinforcing and antioxidant fillers for TMC hydrogels. The core-shell particles were initially synthesized by surfactant-free emulsion polymerization, induced by a photo-redox initiating system of riboflavin assisted by a 3° amine and 2° alcohol co-initiators. The synthesized core-shell particles were based on two polymeric shells: TMC and chitosan, and two polymeric cores: poly (hydroxypropyl methacrylate) (PHPMA) and poly(2-hydroxy ethyl methacrylate) (PHEMA). The presence of both 3° amine on TMC and 2° alcohol on HPMA monomer enhanced the photopolymerization performance. The TMC-based particles had sizes of 122-154 nm and zeta potentials of 10-35 mV, bringing the colloidal stability in the 4-10 pH range. Furthermore, due to the presence of TMC on the shell layer, the core-shell particles could be used as templates to grow the Ag/Au bimetallic nanoparticles with alloy and core-shell types through a thermal reduction. The prepared hybrid particles were incorporated in TMC hydrogels as a multifunctional filler, improving their mechanical and antioxidant properties.

Preparation of a high-performance conductive lignocellulose hydrogel by directly using non-detoxified bisulfite-pretreated corncob

Biomass-based hydrogels have become a research hotspot because of their better biocompatibility. However, the preparation of biomass hydrogels is complicated, and they often need to be modified by introducing other substances. In this study, corncob pretreated with bisulfite (125-185 °C) was used as a raw material to prepare lignocellulose hydrogels. The results showed that directly using the pretreated sample without the washing step lowered the total hydrogel costs while preserving the lignosulfonate (LS) produced during pretreatment. The best tensile (54.1 kPa) and compressive (177.7 kPa) stresses were obtained for the hydrogel prepared from non-detoxified pretreated corncob at 165 °C (NCH-165). The sulfonic acid groups in LS could enhance the interaction between plant cellulose, thus improving its mechanical properties. The capacitor assembled from NCH-165 achieved an energy density of 236.1 Wh/kg at a power density of 499.7 W/kg and a high coulombic efficiency of more than 99 % after 2000 charge/discharge cycles. In conclusion, the present study simplifies the pathway for the preparation of flexible, conductive, and anti-freezing hydrogels by directly utilizing a non-detoxified bisulfite-pretreated corncob.

Innovative biopolyelectrolytes-based technologies for wastewater treatment

Developing eco-friendly, cost-effective, and efficient methods for treating water pollutants has become paramount in recent years. Biopolyelectrolytes (BPEs), comprising natural polymers like chitosan, alginate, and cellulose, have emerged as versatile tools in this pursuit. This review offers a comprehensive exploration of the diverse roles of BPEs in combating water contamination, spanning coagulation-flocculation, adsorption, and filtration membrane techniques. With ionizable functional groups, BPEs exhibit promise in removing heavy metals, dyes, and various pollutants. Studies showcase the efficacy of chitosan, alginate, and pectin in achieving notable removal rates. BPEs efficiently adsorb heavy metal ions, dyes, and pesticides, leveraging robust adsorption capacity and exceptional mechanical properties. Furthermore, BPEs play a pivotal role in filtration membrane techniques, offering efficient separation systems with high removal rates and low energy consumption. Despite challenges related to production costs and property variability, their environmentally friendly, biodegradable, renewable, and recyclable nature positions BPEs as compelling candidates for sustainable water treatment technologies. This review delves deeper into BPEs' modification and integration with other materials; these natural polymers hold substantial promise in revolutionizing the landscape of water treatment technologies, offering eco-conscious solutions to address the pressing global issue of water pollution.

Polyelectrolytes for Environmental, Agricultural, and Medical Applications

In recent decades, polyelectrolytes (PELs) have attracted significant interest owing to a surge in research dedicated to the development of new technologies and applications at the biological level. Polyelectrolytes are macromolecules of which a substantial portion of the constituent units contains ionizable or ionic groups. These macromolecules demonstrate varied behaviors across different pH ranges, ionic strengths, and concentrations, making them fascinating subjects within the scientific community. The aim of this review is to present a comprehensive survey of the progress in the application studies of polyelectrolytes and their derivatives in various fields that are vital for the advancement, conservation, and technological progress of the planet, including agriculture, environmental science, and medicine. Through this bibliographic review, we seek to highlight the significance of these materials and their extensive range of applications in modern times.

Quaternary-ammonium chitosan, a promising packaging material in the food industry

Quaternary-ammonium chitosan (QAC) is a polysaccharide with good water solubility, bacteriostasis, and biocompatibility. QAC is obtained by methylating or grafting the quaternary-ammonium group of chitosan and is an important compound in the food industry. Various QAC-based complexes have been prepared using reversible intermolecular interactions, such as electrostatic interactions, hydrogen bonding, metal coordination, host-guest interactions, and covalent bonding interactions consisting of Schiff base bonding and dynamic chemical bond cross-linking. In the food industry, QAC is often used as a substrate in film or coating for food preservation and as a carrier for active substances to improve the encapsulation efficiency and storage stability of functional food ingredients. In this review, we have assimilated the latest information on QAC to facilitate further discussions and future research. Advancement in research on QAC would contribute toward technology acceleration and its increased contribution to the field of food technology.

Tunicate-mimetic antibacterial hydrogel based on metal ion crosslinking and chitosan functionalization for wound healing

With the increasing prevalence of drug-resistant bacterial infections and frequent occurrences of slow wound healing, the development of novel antibacterial wound dressings has become a serious challenge. Hydrogel dressings have attracted extensive attention on wound healing due to their unique three-dimensional network structures and properties. However, it is a challenge to develop natural long-acting antibacterial hydrogels with multiple functions such as excellent cell affinity, wet adhesion and mechanical properties. Inspired by the wound healing mechanism and adhesion characteristics of tunicates, a series of biomimetic antibacterial hydrogels were prepared by utilizing pyrogallol-modified chitosan (GACS) and polyvinyl alcohol (PVA) as matrix, zinc ions (Zn²⁺) as crosslinking and antibacterial agents, and ethyl N-lauroyl l-arginate hydrochloride (LAE) as the antibacterial active ingredient. The morphology, swelling, water retention, degradability, wet adhesion, biocompatibility, mechanical and rheological properties of PVA/GACS/Zn²⁺/LAE hydrogels were evaluated. And the adhesion ability conferred by the pyrogallol structures enabled the hydrogel with enhanced antibacterial effect and hemostatic ability. Moreover, the in vivo experiments on rat models with full-thickness infected wounds confirmed that PVA/GACS/Zn²⁺/LAE hydrogels could efficiently kill bacteria, significantly improve the wound microenvironment, greatly promote fibroblast proliferation and collagen deposition and ultimately accelerate wound healing. In a word, this study provided a feasible and simple way for the development of biomimetic antibacterial hydrogel dressings applied in infected wounds, which could not only seal wounds with various shapes and provide a moist and antibacterial environment for wounds, but also have certain mechanical strength, excellent wound adhesion, good biocompatibility and hemostatic performance.

Potential use of propolis-loaded quaternized chitosan/pectin hydrogel films as wound dressings: Preparation, characterization, antibacterial evaluation, and in vitro healing assay

Quaternized chitosan (QCS) was blended with pectin (Pec) to improve water solubility and antibacterial activity of the hydrogel films. Propolis was also loaded into hydrogel films to improve wound healing ability. Therefore, the aim of this study was to fabricate and characterize the propolis-loaded QCS/Pec hydrogel films for use as wound dressing materials. The morphology, mechanical properties, adhesiveness, water swelling, weight loss, release profiles, and biological activities of the hydrogel films were investigated. Scanning Electron Microscope (SEM) investigation indicated a homogenous smooth surface of the hydrogel films. The blending of QCS and Pec increased tensile strength and Young's modulus values of the hydrogel films. Moreover, the blending of QCS and Pec improved the stability of the hydrogel films in the medium and controlled the release characteristics of propolis from the hydrogel films. The antioxidant activity of the released propolis from the propolis-loaded hydrogel films was ~21-36 %. The propolis-loaded QCS/Pec hydrogel films showed the bacterial growth inhibition, especially against S. aureus and S. pyogenes. The propolis-loaded hydrogel films were non-toxicity to mouse fibroblast cell line (NCTC clone 929) and supported the wound closure. Therefore, the propolis-loaded QCS/Pec hydrogel films might be good candidates for use as wound dressing materials.

Biodegradable Polymers and Polymer Composites with Antibacterial Properties

Antibiotic resistance is one of the greatest threats to global health and food security today. It becomes increasingly difficult to treat infectious disorders because antibiotics, even the newest ones, are becoming less and less effective. One of the ways taken in the Global Plan of Action announced at the World Health Assembly in May 2015 is to ensure the prevention and treatment of infectious diseases. In order to do so, attempts are made to develop new antimicrobial therapeutics, including biomaterials with antibacterial activity, such as polycationic polymers, polypeptides, and polymeric systems, to provide non-antibiotic therapeutic agents, such as selected biologically active nanoparticles and chemical compounds. Another key issue is preventing food from contamination by developing antibacterial packaging materials, particularly based on degradable polymers and biocomposites. This review, in a cross-sectional way, describes the most significant research activities conducted in recent years in the field of the development of polymeric materials and polymer composites with antibacterial properties. We particularly focus on natural polymers, i.e., polysaccharides and polypeptides, which present a mechanism for combating many highly pathogenic microorganisms. We also attempt to use this knowledge to obtain synthetic polymers with similar antibacterial activity.

Green engineering of TMC-CMS nanoparticles decorated graphene sheets for targeting M. tuberculosis

Our current work intends to primarily engineer a new type of antibacterial composite by preparing a highly biocompatible graphene sheet decorated with TMC-CMS IPNs nanoparticles utilizing one-pot, green, cost-effective ultrasonication approach. The microstructure of as-formed materials was chemically confirmed using various analytical techniques such as ¹H-NMR, FTIR, UV/vis, SEM, and TEM. TEM data has proved the formation of uniformly distributed TCNPs on graphene surfaces with a small particle size of ~22 nm compared with that of pure nanoparticles (~30 nm). The inhibitory activity of these developed materials was examined against the growth of three different M. tuberculosis pathogens and in a comparison with the isoniazid drug as a standard anti-tuberculosis drug. The TCNPs@GRP composite attained MIC values of 0.98, 3.9, and 7.81 μg/mL for inhibiting the growth of sensitive, MDR, and XDR M. tuberculosis pathogens compared to the bare TCNPs (7.81, 31.25, >125 μg/mL) and the isoniazid drug (0.24, 0, 0 μg/mL), respectively. This reveals a considerable synergism in the antituberculosis activity between TCNPs and graphene nanosheets. Cytotoxicity of the TCNPs@GRP was examined against normal lung cell lines (WI38) and was found to have cell viability of 100% with the concentration range of 0.98-7.81 μg/mL.

Advances in Antiviral Delivery Systems and Chitosan-Based Polymeric and Nanoparticulate Antivirals and Antiviral Carriers

Current antiviral therapy research is focused on developing dosage forms that enable highly effective drug delivery, providing a selective effect in the organism, lower risk of adverse effects, a lower dose of active pharmaceutical ingredients, and minimal toxicity. In this article, antiviral drugs and the mechanisms of their action are summarized at the beginning as a prerequisite background to develop relevant drug delivery/carrier systems for them, classified and briefly discussed subsequently. Many of the recent studies aim at different types of synthetic, semisynthetic, and natural polymers serving as a favorable matrix for the antiviral drug carrier. Besides a wider view of different antiviral delivery systems, this review focuses on advances in antiviral drug delivery systems based on chitosan (CS) and derivatized CS carriers. CS and its derivatives are evaluated concerning methods of their preparation, their basic characteristics and properties, approaches to the incorporation of an antiviral drug in the CS polymer as well as CS nanoparticulate systems, and their recent biomedical applications in the context of actual antiviral therapy. The degree of development (i.e., research study, in vitro/ex vivo/in vivo preclinical testing), as well as benefits and limitations of CS polymer and CS nanoparticulate drug delivery systems, are reported for particular viral diseases and corresponding antivirotics.

Progress of polymer-based strategies in fungal disease management: Designed for different roles

Fungal diseases have posed a great challenge to global health, but have fewer solutions compared to bacterial and viral infections. Development and application of new treatment modalities for fungi are limited by their inherent essential properties as eukaryotes. The microorganism identification and drug sensitivity analyze are limited by their proliferation rates. Moreover, there are currently no vaccines for prevention. Polymer science and related interdisciplinary technologies have revolutionized the field of fungal disease management. To date, numerous advanced polymer-based systems have been developed for management of fungal diseases, including prevention, diagnosis, treatment and monitoring. In this review, we provide an overview of current needs and advances in polymer-based strategies against fungal diseases. We high light various treatment modalities. Delivery systems of antifungal drugs, systems based on polymers' innate antifungal activities, and photodynamic therapies each follow their own mechanisms and unique design clues. We also discuss various prevention strategies including immunization and antifungal medical devices, and further describe point-of-care testing platforms as futuristic diagnostic and monitoring tools. The broad application of polymer-based strategies for both public and personal health management is prospected and integrated systems have become a promising direction. However, there is a gap between experimental studies and clinical translation. In future, well-designed in vivo trials should be conducted to reveal the underlying mechanisms and explore the efficacy as well as biosafety of polymer-based products.

Fabrication and In vitro Evaluation of Carbopol/Polyvinyl Alcohol-based pH-sensitive Hydrogels for Controlled Drug Delivery

BACKGROUND

Diclofenac sodium has a short half-life (about 1.5 hours), requiring repeated administration, and as a result, serious complications, such as GI bleeding, peptic ulcer, and kidney and liver dysfunction, are generated. Hence, a sustained/controlled drug delivery system is needed to overcome the complications caused by the administration of diclofenac sodium.

AIMS

This study aimed to fabricate and evaluate carbopol/polyvinyl alcohol-based pH-sensitive hydrogels for controlled drug delivery.

OBJECTIVE

pH-sensitive carbopol/polyvinyl alcohol graft-poly(acrylic acid) hydrogels (Cp/PVA-g-PAa hydrogels) were developed for the controlled delivery of diclofenac sodium.

METHODS

The combination of carbopol/polyvinyl alcohol, acrylic acid, and ethylene glycol dimethacrylate was used as polymer, monomer, and cross-linker, respectively. The effects of the formulation's composition on porosity, swelling index, and release pattern of diclofenac sodium from the developed hydrogels were investigated.

RESULTS

An increase in porosity and swelling was observed with the increasing amounts of carbopol and acrylic acid, whereas polyvinyl alcohol showed the opposite effect. Due to the formation of a highly viscous system, the drug release decreased with the increasing concentrations of carbopol and polyvinyl alcohol while increased with increasing acrylic acid concentration. The pH-responsive properties of the fabricated hydrogels were demonstrated by dynamic swelling and drug release studies at three different pH values. Higher dynamic swelling and diclofenac sodium (model drug) release were found at high pH values compared to low pH values, i.e., pH 7.4 > 4.6 > 1.2, respectively. Cytotoxicity studies reported no toxic effect of the prepared hydrogels, thus indicating that the prepared hydrogels are safe to be used on clinical basis.

CONCLUSION

The prepared carbopol/polyvinyl alcohol crosslinked hydrogel can be used as a promising carrier for the controlled release of drugs.

Gallic Acid-Loaded Sodium Alginate-Based (Polyvinyl Alcohol-Co-Acrylic Acid) Hydrogel Membranes for Cutaneous Wound Healing: Synthesis and Characterization

Traditional wound dressings often cannot treat wounds caused by bacterial infections or other wound types that are insensitive to these wound treatments. Therefore, a biodegradable, bioactive hydrogel wound dressing could be an effective alternative option. The purpose of this study was to develop a hydrogel membrane comprised of sodium alginate, polyvinyl alcohol, acrylic acid, and gallic acid for treating skin wounds. The newly developed membranes were analyzed using Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), sol-gel fraction, porosity, mechanical strength, swelling, drug release and data modelling, polymeric network parameters, biodegradation, and antioxidation (DPPH and ABTS) and antimicrobial activity against Gram-positive and negative bacteria. The results revealed that hydrogel membranes were crosslinked successfully and had excellent thermal stability, high drug loading, greater mechanical strength, and exhibited excellent biodegradation. Additionally, the swelling ability and the porosity of the surface facilitated a controlled release of the encapsulated drug (gallic acid), with 70.34% release observed at pH 1.2, 70.10% at pH 5.5 (normal skin pH), and 86.24% at pH 7.4 (wounds pH) in 48 h. The gallic acid-loaded hydrogel membranes showed a greater area of inhibition against Pseudomonas aeruginosa, Staphylococcus aureus, and Escherichia coli bacteria as well as demonstrated excellent antioxidant properties. Based on Franz cell analyses, the permeation flux of the drug from optimized formulations through mice skin was 92 (pH 5.5) and 110 (pH 7.4) μg/cm²·h^-1. Moreover, hydrogel membranes retained significant amounts of drug in the skin for 24 h, such as 2371 (pH 5.5) and 3300 µg/cm² (pH 7.4). Acute dermal irritation tests in rats showed that hydrogel membranes were nonirritating. Hydrogel membranes containing gallic acid could be an effective option for improving wound healing and could result in faster wound healing.

Synthesis of bee venom loaded chitosan nanoparticles for anti-MERS-COV and multi-drug resistance bacteria

This study aims to fully exploit the natural compound; bee venom (BV) as a substance that can kill and inhibit the growth of microbes and viruses. For this target, BV was loaded onto a safe, natural, and economically inexpensive polymer; chitosan (Ch) in its nano-size form prepared using ionic gelation method in the presence of chemical crosslinking agent (sodium tripolyphosphate; TPP). The findings illustrated that chitosan nanoparticles (ChNPs) were prepared thru this method and exhibited spherical shape and average hydrodynamic size of 202 nm with a polydispersity index (PDI = 0.44). However, the size was increased to 221 nm with PDI (0.37) when chitosan nanoparticles were loaded with BV (ChNC). In addition, the particles of BV appeared as a core and chitosan nanoparticles as a shell implying the successful preparation of nanocomposite (ChNC). Encapsulation of BV into ChNPs with significantly small size distribution and good stability that protect these formed nanocomposites from agglomeration. The cytopathic effect (CPE) inhibition assay was used to identify potential antivirals for Middle East respiratory syndrome coronavirus (MERS-CoV). The response of the dose study was designed to influence the range of effectiveness for the chosen antiviral, i.e., the 50 % inhibitory concentration (IC₅₀), as well as the range of cytotoxicity (CC₅₀). However, our results indicated that crude BV had mild anti-MERS-COV with selective index (SI = 4.6), followed by ChNPs that exhibited moderate anti-MERS-COV with SI = 8.6. Meanwhile. The nanocomposite of ChNC displayed a promising anti-MERS-COV with SI = 12.1. Additionally, the synthesized nanocomposite (ChNC) had greater antimicrobial activity against both Gram-positive and Gram-negative bacteria when compared with ChNPs, BV or the utilized model drug.

Preparation of pH-Responsive Hydrogels Based on Chondroitin Sulfate/Alginate for Oral Drug Delivery

This study investigates pH-sensitive hydrogels based on biocompatible, biodegradable polysaccharides and natural polymers such as chondroitin sulfate and alginate in combination with synthetic monomer such as acrylic acid, as controlled drug carriers. Investigations were conducted for chondroitin sulfate/alginate-graft-poly(acrylic acid) hydrogel in various mixing ratios of chondroitin sulfate, alginate and acrylic acid in the presence of ammonium persulfate and N',N'-Methylene bisacrylamide. Crosslinking and loading of drug were confirmed by Fourier transform infrared spectroscopy. Thermal stability of both polymers was enhanced after crosslinking as indicated by thermogravimetric analysis and differential scanning calorimeter thermogram of developed hydrogel. Similarly, surface morphology was evaluated by scanning electron microscopy, whereas crystallinity of the polymers and developed hydrogel was investigated by powder X-ray diffraction. Furthermore, swelling and drug-release studies were investigated in acidic and basic medium of pH 1.2 and 7.4 at 37 °C, respectively. Maximum swelling and drug release were detected at pH 7.4 as compared to pH 1.2. Increased incorporation of hydrogel contents led to an increase in porosity, drug loading, and gel fraction while a reduction in sol fraction was seen. The polymer volume fraction was found to be low at pH 7.4 compared to pH 1.2, indicating a prominent and greater swelling of the prepared hydrogels at pH 7.4. Likewise, a biodegradation study revealed a slow degradation rate of the developed hydrogel. Hence, we can conclude from the results that a fabricated system of hydrogel could be used as a suitable carrier for the controlled delivery of ketorolac tromethamine.

Preparation, In Vitro Characterization, and Cytotoxicity Evaluation of Polymeric pH-Responsive Hydrogels for Controlled Drug Release

The aim of the current investigation was based on the development of pH-responsive hydrogels of chondroitin sulfate, carbopol, and polyvinyl alcohol polymerized with acrylic acid in the presence of ammonium persulfate and ethylene glycol dimethylacrylate for controlled drug delivery. A free radical polymerization technique was used for the preparation of these pH-responsive hydrogels. The gel fraction of the prepared hydrogels was increased with the increase in the chondroitin sulfate, carbopol, polyvinyl alcohol, and acrylic acid content, while the sol-fraction was decreased. Swelling and drug release studies were performed in various pH conditions. Greater swelling and drug release were observed at high pH values (pH 4.6 and 7.4) as compared to low pH value (pH 1.2), representing the pH-responsive nature of the synthesized hydrogels. Porosity and drug loading were increased with the incorporation of high concentrations of hydrogel contents except polyvinyl alcohol, which showed reverse effects. Similarly, biodegradation study reported a slow degradation rate of the prepared hydrogels with the increase in hydrogel constituents. Cytotoxicity study proved the safe use of developed hydrogels as no toxic effect was shown on T84 human colon cancer cells. Similarly, various characterizations, including Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, X-ray diffraction, and scanning electron microscopy, were performed for prepared hydrogels. Hence, we could demonstrate that the prepared hydrogels can be used as a promising drug carrier for the controlled delivery of drugs.

One-pot green synthesis of antimicrobial chitosan derivative nanocomposites to control foodborne pathogens

Food contamination by foodborne pathogens is considered a serious problem worldwide. This study aimed to show the efficacy of the one-pot green biosynthesis of nanocomposites as effective antimicrobial agents based on a water-soluble biodegradable polysaccharide and silver nitrate (AgNO₃). Silver (Ag) nanoparticles were synthesized using different concentrations of AgNO₃ solution (1, 2, and 3 mM) in the presence of N-quaternized chitosan and N,N,N-trimethyl chitosan chloride (TMC) as both a reducing and stabilizing agent. In addition, the structure of TMC/Ag nanocomposites was confirmed using different analytical tools including FTIR, UV-Vis, XRD, HR-TEM, FE-SEM, and EDX techniques. The FTIR spectra and UV-Vis spectra showed the main characteristic absorption peaks of Ag nanoparticles. In addition, FE-SEM images showed the formation of spherical bead-like particles on the surface of TMC. Correspondingly, the EDX spectrum showed a peak for silver, indicating the successful synthesis of Ag nanoparticles inside the TMC chains. Moreover, HR-TEM images exhibited the good distribution of Ag nanoparticles, which appeared as nano-spherical shapes. The antimicrobial activity of TMC/Ag nanocomposites was examined against three foodborne pathogens, including Salmonella Typhimurium as a Gram-negative bacterium, Bacillus subtilis as a Gram-positive bacterium and Aspergillus fumigatus as a fungus. The results showed that TMC/Ag nanocomposites had better antimicrobial activity compared with TMC alone and their antimicrobial activity increased with an increase in the concentration of Ag. The results confirmed that the TMC/Ag nanocomposites can be potentially used as an effective antimicrobial agent in food preservation.

This study aimed to show the efficacy of the one-pot green biosynthesis of nanocomposites as effective antimicrobial agents based on a water-soluble biodegradable polysaccharide and silver nitrate (AgNO₃).

Spectroscopic study of self-assembly of anti-hepatitis C virus sofosbuvir drug with bio-polymeric nanoparticles for improving the drug release effect

Self-assembly of Sofosbuvir drug (SOF) anti-hepatitis C virus (HCV) with bio-polymeric nanoparticles such as chitosan nanoparticles (Cs NPs) and polyvinyl alcohol nanoparticles (PVA NPs), the novel composites have been characterized successfully by different analysis such as Energy-dispersive X-ray spectroscopy (EDX), Scanning electron microscopy (SEM), UV-Visible spectrophotometer (UV-Vis) and Fourier Transmittance Infrared (FT-IR). The improvement of the Sofosbuvir effect as a result of loading drug on the bio-polymer NPs surface has been detected by the UV-Vis, and fluorescence spectroscopy techniques. The improvement of SOF efficiency was revealed via studying the drug release of SOF from biopolymers NPs surface at pH 7.4, UV-Vis spectra used for the releasing process. The binding constant (K_b) value was reported at 0.000055 and 0.3613 min^-1 for Cs and PVA NPs respectively. Also, the value of K_SV was documented at 0.0014 and 7.16 min^-1 for Cs@SOF and PVA@SOF hybrid nanocomposite. The incorporation rate (k) of SOF on the surface of biopolymer nano molecules was calculated to be 0.00812 and 0.0165 min^-1 for Cs and PVA NPs, respectively. Besides the observed value of (n) was close to the unit 0.74 and 0.86 for Cs and PVA NPs, respectively. The SOF released from Cs NPs surface was documented at 0.09 mg after 24 h, while PVA NPs reported at 0.7 mg at the same time and the release efficiency is 56.5 and 73% for Cs@SOF and PVP@SOF, respectively. From the results, we suggest Cs/SOF and PVA/SOF hybrid nanocomposites have spectroscopic results that make them promising candidate drugs, but need to the clinical trials.

Biomedical Applications of Quaternized Chitosan

The natural polymer chitosan is the second most abundant biopolymer on earth after chitin and has been extensively explored for preparation of versatile drug delivery systems. The presence of two distinct reactive functional groups (an amino group at C2, and a primary and secondary hydroxyl group at C3 and C6) of chitosan are involved in the transformation of expedient derivatives such as acylated, alkylated, carboxylated, quaternized and esterified chitosan. Amongst these, quaternized chitosan is preferred in pharmaceutical industries owing to its prominent features including superior water solubility, augmented antimicrobial actions, modified wound healing, pH-sensitive targeting, biocompatibility, and biodegradability. It has been explored in a large realm of pharmaceuticals, cosmeceuticals, and the biomedical arena. Immense classy drug delivery systems containing quaternized chitosan have been intended for tissue engineering, wound healing, gene, and vaccine delivery. This review article outlines synthetic techniques, basic characteristics, inherent properties, biomedical applications, and ubiquitous challenges associated to quaternized chitosan.

Enhanced antifungal activity of novel cationic chitosan derivative bearing triphenylphosphonium salt via azide-alkyne click reaction

As one of the most promising biopolymers for a variety of potential applications, chitosan has attracted much attention because of its unique biological, chemical, and physical properties. The functionalization of chitosan has been adopted to synthesize novel chitosan derivatives with improved water-solubility and excellent biological activities. In this paper, chitosan was functionalized with a triphenylphosphonium group by means of the copper (I) catalyzed azide-alkyne "click" reaction and has been investigated as potential polymer for agricultural antifungal biomaterial. The influence of chemical modification on the structural characteristics and water-solubility of chitosan was investigated by FTIR spectroscopy, ¹H NMR spectroscopy, elemental analysis, and UV-vis spectrum. Furthermore, the antifungal property of target chitosan derivative against four plant threatening fungal pathogens was evaluated and in vitro investigation demonstrated that triphenylphosphonium salt incorporated chitosan backbone had excellent antifungal property compared with chitosan and intermediate chitosan derivative. Notably, target chitosan derivative displayed relatively strongest antifungal effect with over 80% inhibitory index against Botrytis cinerea at 1.0 mg/mL. The results of a detailed antifungal study indicated that cationic chitosan derivative bearing 1,2,3-triazole and triphenylphosphonium moieties provided a promising platform for preparation of novel cationic antifungal biomaterials in the field of agriculture.

Quaternary Ammonium Chitosans: The Importance of the Positive Fixed Charge of the Drug Delivery Systems

As a natural polysaccharide, chitosan has good biocompatibility, biodegradability and biosecurity. The hydroxyl and amino groups present in its structure make it an extremely versatile and chemically modifiable material. In recent years, various synthetic strategies have been used to modify chitosan, mainly to solve the problem of its insolubility in neutral physiological fluids. Thus, derivatives with negative or positive fixed charge were synthesized and used to prepare innovative drug delivery systems. Positively charged conjugates showed improved properties compared to unmodified chitosan. In this review the main quaternary ammonium derivatives of chitosan will be considered, their preparation and their applications will be described to evaluate the impact of the positive fixed charge on the improvement of the properties of the drug delivery systems based on these polymers. Furthermore, the performances of the proposed systems resulting from in vitro and ex vivo experiments will be taken into consideration, with particular attention to cytotoxicity of systems, and their ability to promote drug absorption.

Cationic chitosan derivatives as potential antifungals: A review of structural optimization and applications

The increasing resistance of pathogen fungi poses a global public concern. There are several limitations in current antifungals, including few available fungicides, severe toxicity of some fungicides, and drug resistance. Therefore, there is an urgent need to develop new antifungals with novel targets. Chitosan has been recognized as a potential antifungal substance due to its good biocompatibility, biodegradability, non-toxicity, and availability in abundance, but its applications are hampered by the low charge density results in low solubility at physiological pH. It is believed that enhancing the positive charge density of chitosan may be the most effective approach to improve both its solubility and antifungal activity. Hence, this review mainly focuses on the structural optimization strategy of cationic chitosan and the potential antifungal applications. This review also assesses and comments on the challenges, shortcomings, and prospect of cationic chitosan derivatives as antifungal therapy.

PEI-modified core-shell/bead-like amino silica enhanced poly (vinyl alcohol)/chitosan for diclofenac sodium efficient adsorption

Residual diclofenac sodium (DS) in water is a potential hazard. The electrostatic attraction between amino group of adsorbents and carboxyl group of DS under acidic conditions can effectively remove DS from water. Herein, a novel core-shell adsorbent of poly(vinyl alcohol)/chitosan/amino-grafted silica@polyethylenimine (PVA/CS/SAP@PEI) gel bead was prepared to efficiently uptake DS from wastewater. In this study, the gel bead was characterized using FTIR, XPS, SEM, EDS, and ¹³C NMR. The experimental data shows that there is a strong correlation between adsorption capacity. The adsorption data fitted well with the Freundlich isotherm model and the pseudo-second-order model. The results of thermodynamics show that the adsorption process is spontaneous, endothermic, and increases entropy. The maximum adsorption capacity for DS was calculated as 493.81 mg/g at pH 5 (308 K). The adsorbent still exhibited excellent adsorption capacity after recycling five times, showing it has excellent potential for practical applications.

Trimethyl Chitosan/Siloxane-Hybrid Coated Fe3O4 Nanoparticles for the Uptake of Sulfamethoxazole from Water

The presence of several organic contaminants in the environment and aquatic compartments has been a matter of great concern in the recent years. To tackle this problem, new sustainable and cost-effective technologies are needed. Herein we describe magnetic biosorbents prepared from trimethyl chitosan (TMC), which is a quaternary chitosan scarcely studied for environmental applications. Core@shell particles comprising a core of magnetite (Fe3O4) coated with TMC/siloxane hybrid shells (Fe3O4@SiO2/SiTMC) were successfully prepared using a simple one-step coating procedure. Adsorption tests were conducted to investigate the potential of the coated particles for the magnetically assisted removal of the antibiotic sulfamethoxazole (SMX) from aqueous solutions. It was found that TMC-based particles provide higher SMX adsorption capacity than the counterparts prepared using pristine chitosan. Therefore, the type of chemical modification introduced in the chitosan type precursors used in the surface coatings has a dominant effect on the sorption efficiency of the respective final magnetic nanosorbents.

Hydrogen-Bond Assembly of Poly(vinyl alcohol) and Polyhexamethylene Guanidine for Nonleaching and Transparent Antimicrobial Films

The combination of transparency, antimicrobial activities, nonleaching of antimicrobial component and green preparation for poly(vinyl alcohol) (PVA) films is of importance for practical applications in industry. However, until now it remains a challenge. Herein, a facile antimicrobial PVA films containing polyhexamethylene guanidine (PHMG) is reported via a green solution casting method. Such PVA films show high transparency of 91%, above 99.99% of antimicrobial rates against Escherichia coli and Staphylococcus aureus, and nonleaching characteristic of PHMG due to the hydrogen-bond (H-bond) interaction between PHMG and PVA. The thermal stability and mechanical properties of the PVA films are further improved compared to neat PVA film. These antimicrobial films are expected to find promising applications in tissue engineering and packaging fields, which opens up a methodology to prepare nonleaching antimicrobial polymeric materials via H-bond.

Sorption and recovery of platinum from simulated spent catalyst solution and refinery wastewater using chemically modified biomass as a novel sorbent

In this study, Lagerstroemia speciosa biomass modified by polyethylenimine (PEI-LS) was developed as a potential biosorbent for sorption and recovery of platinum(II) from platinum bearing waste solutions. Batch experiments were conducted to study the effect of various parameters on the sorption and recovery of platinum(II) using PEI-LS. The equilibrium time for platinum(II) sorption process was found to be 6 h. Both the sorption kinetics and sorption isotherm data fits pseudo second-order kinetic model and Langmuir isotherm, respectively. The maximum sorption capacity of platinum(II) onto PEI-LS at pH 2 for the studied temperature range (25-45 °C) is in the range of 122-154 mg/g. Evaluation of thermodynamic parameters suggests that the platinum(II) sorption is spontaneous and endothermic in nature. The regeneration of PEI-LS can be achieved using acidic thiourea as an eluent for recovery of platinum from the biosorbent. Fourier transform infrared (FT-IR) analysis suggests many functional groups were involved in platinum(II) sorption onto PEI-LS. Both the scanning electron microscope/energy dispersive spectroscopy (SEM/EDS) and X-ray photoelectron spectroscopy (XPS) analysis suggest a successful modification of raw biomass with PEI. The XPS analysis further concludes that platinum(II) sorption is governed by ion-exchange and co-ordination reaction. Finally, the PEI-LS was shown to recover ≥ 90% of platinum from two simulated solutions: the acid-leached spent catalyst solution and refinery wastewater. The biosorbent developed in this study is a low-cost and eco-friendly media that can be effectively used for platinum recovery from industrial wastewater.

Preparation and Characterization of Quaternized Chitosan Derivatives and Assessment of Their Antioxidant Activity

Chitosan (CS) is an abundant and renewable polysaccharide that is reported to exhibit a great variety of beneficial properties. However, the poor solubility of chitosan in water limits its applications. In this paper, we successfully synthesized single N-quaternized (QCS) and double N-diquaternized (DQCS) chitosan derivatives, and the resulting quaternized materials were water-soluble. The degree of quaternization (DQ) of QCS and DQCS was 0.8 and 1.3, respectively. These derivatives were characterized by FTIR, ¹H NMR, 13C NMR, TGA, and SEM. Moreover, the antioxidant activity of the chitosan was evaluated by free radical scavenging ability (against DPPH-radical, hydroxyl-radical, and superoxide-radical) and ferric reducing power. Our results suggested that the antioxidant abilities were in the order of DQCS > QCS > CS, which was consistent with the number of quaternized groups. These data demonstrate that the number of quaternized groups of chitosan derivatives contributes to their antioxidant activity. Therefore, DQCS, with a higher number of quaternized groups and higher positive charge density, is endowed with high antioxidant activity, and can be used as a candidate material in food and pharmaceutical industries.

Green synthesis of antimicrobial and antitumor N,N,N-trimethyl chitosan chloride/poly (acrylic acid)/silver nanocomposites

The present study is imported to solve two critical problems we face in our daily life which are microbial pollution and colon cancer. One pot green synthesis of a water soluble polyelectrolyte complex (PEC) between cationic polysaccharide as N,N,N-trimethyl chitosan chloride (TMC) and anionic polymer as poly (acrylic acid) (PAA) in presence of silver nanoparticles to yield (TMC/PAA/Ag) nanocomposites with different Ag weight ratios. Structure of TMC, PAA and TMC/PAA (PEC) were proved via different analysis tools. TMC/PAA and its Ag nanocomposites are used as antimicrobial agents against different pathogenic bacteria and fungi to solve microbial pollution. TMC/PAA-Silver nanocomposites had the highest antimicrobial activity which increases with increasing Ag %. Cytotoxicity data confirmed also that TMC/PAA/Ag (3%) had the most cytotoxic effect (the less cell viability %) towards colon cancer. TMC/PAA (PEC) was formed through electrostatic interactions between N-quaternized (-N⁺R₃) groups in TMC and carboxylate (-COO^-) groups in PAA.

Polyvinyl alcohol-based hydrophilic monoliths from water-in-oil high internal phase emulsion template

Herein, we report a new approach to fabricate polyvinyl alcohol (PVA) based hydrophilic monoliths by alcoholysis of porous emulsion-templated polyvinyl acetate (PVAc). The precursory PVAc-based monolith is obtained by polymerization of a W/O high internal phase emulsion (HIPE) containing vinyl acetate as the external phase while water as the internal phase. As an alcoholysis-stable tri-functional commonomer, triallyl isocyanurate is chosen as the crosslinking agent to prevent possible collapse of the polymeric skeleton and the consequent losses in mechanical properties during the alcoholysis step. By alcoholysis of the resulting PVAc-based monolith, the PVA-based monoliths are successful prepared as confirmed by FTIR analysis. BET analysis and SEM observation confirm the formation of open-cell and highly interconnected porous structures of PVA-based monoliths with surface areas of around 16m²/g. Stemming from the intrinsic hydrophilicity of hydroxyl and morphology, PVA-based monoliths exhibit great enhancement in hydrophilicity with a much lower water contact angles than that of PVAc-based monoliths.

A Gelated Colloidal Crystal Attached Lens for Noninvasive Continuous Monitoring of Tear Glucose

Patients of diabetes mellitus urgently need noninvasive and continuous glucose monitoring in daily point-of-care. As the tear glucose concentration has a positive correlation with that in blood, the hydrogel colloidal crystal integrated into contact lens possesses promising potential for noninvasive monitoring of glucose in tears. This paper presents a new glucose-responsive sensor, which consists a crystalline colloidal array (CCA) embedded in hydrogel matrix, attached onto a rigid gas permeable (RGP) contact lens. This novel sensing lens is able to selectively diffract visible light, whose wavelength shifts between 567 and 468 nm according to the alternation of the glucose concentration between 0 and 50 mM and its visible color change between reddish yellow, green, and blue. The detection limit of responsive glucose concentration can be reduced to 0.05 mM. Its combination with a contact lens endows it with excellent biocompatibility and portability, which shows great possibility for it to push the development of glucose-detecting devices into new era.

Preparation and characterization of chitosan-poly(vinyl alcohol) nanocomposite films embedded with functionalized multi-walled carbon nanotube

The attempt of this study was to modify chitosan/poly(vinyl alcohol) (CS/PVA) matrix properties using Starch/Multi-Walled Carbon Nanotube (MWCNT)-Valine (SMV) nanocomposite (NC) as a new filler. To prevent aggregation and obtain homogeneous dispersion of MWCNT into the matrix, at first the surface of MWCNTs was covalently modified by Valine as a natural amino acid. Then, modified MWCNT was incorporated into the starch matrix for the preparation of SMV NC. In the second step, different concentrations of prepared SMV NCs (30, 50 and 70wt.%) were embedded to the CS-PVA matrix by ultrasonication technique for the fabrication of CS-PVA/SMV NC films. The effect of SMV NC on the properties of CS-PVA was studied by different techniques. Thermogravimetric analysis indicated that the thermal stability of the CS-PVA was enhanced after incorporation with nanofillers. The results indicated that prepared NCs were promising adsorbents for the removal of Cd(II) ions from the aqueous solution.