Antibacterial silver nanoparticles in polyvinyl alcohol/sodium alginate blend produced by gamma irradiation

Bioactive material‑sodium alginate-polyvinyl alcohol composite film scaffold for bone tissue engineering application

Road accidents and infection-causing diseases during bone surgery are serious problems in orthopedics, and thus, addressing these pressing challenges is crucial. In the present study, the 70S30C calcium silicate bioactive material (BM) is synthesized by a sustainable approach employing a precipitation method using recycled rice husk and eggshells as a precursor of silica and calcium. Further, 70S30C BM is composited with sodium alginate (SA) and polyvinyl alcohol (PVA), and the films were prepared by solvent casting method. The composite films were prepared without the addition of acid, binder, and crosslinking agents. Further, the films were characterized by BET, XRD, ATR-FTIR, SEM, and EDS mapping. The in vitro bioactivity and biodegradation study is performed in the simulated body fluid (SBF). The in vitro haemolysis study is executed using human blood and the results demonstrate haemocompatibility of the composite films. The ex ovo CAM assay also exhibits good neovascularization. The in vitro and in vivo biocompatibility assay proves its non-toxic nature. Further, the in vivo study reveals that the engineered composite film demonstrates accelerated osteogenesis. This work broadens the orthopedic potential of the composite film and offers bioactivity, haemocompatibility, angiogenesis, non-toxicity, and in vivo osteogenesis which would serve as a potential candidate for bone tissue engineering application.

Seaweed-based biopolymers for food packaging: A sustainable approach for a cleaner tomorrow

With the increasing environmental and health consequences of uncontrolled plastic use, the scientific community is progressively gravitating toward biodegradable and ecofriendly packaging alternatives. Seaweed polysaccharides have attracted attention recently because of their biodegradability, nontoxicity, antioxidant properties, and superior film-forming ability. However, it has some limitations for packaging applications, such as low tensile strength, water solubility, and only modest antimicrobial properties. The incorporation of biopolymers, nanoparticles, or organic active ingredients enhances these characteristics. This review encapsulates the contemporary research landscape pivoting around the role of seaweed polysaccharides in the development of bioplastics, active packaging solutions, edible films, and protective coatings. A meticulous collation of existing literature dissects the myriad food application avenues for these marine biopolymers, emphasizing their multifaceted physical, mechanical, thermal, and functional attributes, including antimicrobial and antioxidant. A key facet of this review spotlights environmental ramifications by focusing on their biodegradability, reinforcing their potential as a beacon of sustainable innovation. This article delves into the prevalent challenges that stymie large-scale adoption and commercialization of seaweed-centric packaging, offering a comprehensive perspective on this burgeoning domain.

Composite Hydrogel of Poly(vinyl alcohol) Loaded by Citrus hystrix Leaf Extract, Chitosan, and Sodium Alginate with In Vitro Antibacterial and Release Test

Citrus hystrix leaves have been used traditionally as a spice, a traditional medicine for respiratory and digestive disorders, and a remedy for bacterial infections. This study reports on the synthesis of composite hydrogels using the freeze-thaw method with poly(vinyl alcohol) (PVA) as the building block loaded by C. hystrix leaf extract (CHLE). Additionally, chitosan (CS) and sodium alginate (SA) were also loaded, respectively, to increase the antibacterial activity and to control the extract release of the composite hydrogels. The combinations of the compositions were PVA, PVA/CHLE, PVA/CHLE/CS, PVA/CHLE/SA, and PVA/CHLE/SA/CS. The internal morphology of the hydrogels shows some changes after the PVA/CHLE hydrogel was loaded by CS, SA, and SA/CS. The analysis of the Fourier transform infrared (FTIR) spectra confirmed the presence of PVA, CHLE, CS, and SA in the composite hydrogels. From the X-ray diffraction (XRD) characterization, it was shown that the composite hydrogels maintained their semicrystalline properties with decreasing crystallinity degree after being loaded by CS, SA, and SA/CS, as also supported by differential scanning calorimetry (DSC) characterization. The compressive strength of the PVA/CHLE hydrogel decreases after the loading of CS, SA, and SA/CS, so that it becomes more elastic. Despite being loaded in the composite hydrogels, the CHLE retained its antibacterial activity, as evidenced in the in vitro antibacterial test. The loading of CS succeeded in increasing the antibacterial activity of the composite hydrogels, while the loading of SA resulted in the decrease of the antibacterial activity. The release of extract from the composite hydrogels was successfully slowed down after the loading of CS, SA, and SA/CS, resulting in a controlled release following the pseudo-Fickian diffusion. The cytotoxic activity test proved that all hydrogel samples can be used safely on normal cells up to concentrations above 1000 μg/mL.

Construction methods and biomedical applications of PVA-based hydrogels

Polyvinyl alcohol (PVA) hydrogel is favored by researchers due to its good biocompatibility, high mechanical strength, low friction coefficient, and suitable water content. The widely distributed hydroxyl side chains on the PVA molecule allow the hydrogels to be branched with various functional groups. By improving the synthesis method and changing the hydrogel structure, PVA-based hydrogels can obtain excellent cytocompatibility, flexibility, electrical conductivity, viscoelasticity, and antimicrobial properties, representing a good candidate for articular cartilage restoration, electronic skin, wound dressing, and other fields. This review introduces various preparation methods of PVA-based hydrogels and their wide applications in the biomedical field.

Biogenic Vaterite Calcium Carbonate-Silver/Poly(Vinyl Alcohol) Film for Wound Dressing

Vaterite, a spherical polymorph of CaCO3, shows potential as a carrier for the stable and controlled release of silver nanoparticles (AgNPs), preventing their aggregation or loss of efficacy during application. Furthermore, the embedding of CaCO3-Ag in a poly(vinyl alcohol) (PVA) matrix helps effectively encapsulate and protect the CaCO3-Ag microspheres and provides mechanical stability for better contact with the wound surface. This article focuses on the fabrication of an antimicrobial and biocompatible absorbent film embedded with precipitated biogenic vaterite CaCO3-Ag microspheres. The impact of vaterite CaCO3-Ag on the physical, chemical, nanomechanical, biocompatibility, and antimicrobial properties of the PVA films was investigated. The morphology study revealed a bilayer film structure with an inactive and active surface containing homogeneously distributed vaterite CaCO3-Ag. The X-ray photoelectron spectroscopy (XPS) analysis of the spin-orbit splitting in the Ag 3d5/2 and Ag 3d3/2 peaks indicated the presence of both metallic and ionic states of silver in vaterite CaCO3-Ag prior to its incorporation into the PVA polymer matrix. However, upon embedding in the PVA matrix, a subsequent transformation to solely ionic states was observed. The nanomechanical properties of PVA improved, and the reduced modulus and hardness increased to 14.62 ± 5.23 and 0.64 ± 0.29 GPa, respectively. The films demonstrate a significant activity toward Gram-negative Escherichia coli bacteria. The release of AgNPs was studied in both open and closed systems at pH 6, mimicking the pH environment of the wound, and it demonstrated a dependency on the type of capping agent used for synthesis and loading of AgNPs. The results further revealed the biocompatibility of the prepared films with human dermal fibroblast cells at a concentration of ≤5 mg/mL, making them applicable and functional for wound dressing applications.

Formulation and Comprehensive Evaluation of Biohybrid Hydrogel Membranes Containing Doxycycline or Silver Nanoparticles

Complicated wounds often require specialized medical treatments, and hydrogels have emerged as a popular choice for wound dressings in such cases due to their unique properties and the ability to incorporate and release therapeutic agents. Our focus was to develop and characterize a new optimized formula for biohybrid hydrogel membranes, which combine natural and synthetic polymers, bioactive natural compounds, like collagen and hyaluronic acid, and pharmacologically active substances (doxycycline or npAg). Dynamic (oscillatory) rheometry confirmed the strong gel-like properties of the obtained hydrogel membranes. Samples containing low-dose DOXY showed a swelling index of 285.68 ± 6.99%, a degradation rate of 71.6 ± 0.91% at 20 h, and achieved a cumulative drug release of approximately 90% at pH 7.4 and 80% at pH 8.3 within 12 h. The addition of npAg influenced the physical properties of the hydrogel membranes. Furthermore, the samples containing DOXY demonstrated exceptional antimicrobial efficacy against seven selected bacterial strains commonly associated with wound infections and complications. Biocompatibility assessments revealed that the samples exhibited over 80% cell viability. However, the addition of smaller-sized nanoparticles led to decreased cellular viability. The obtained biohybrid hydrogel membranes show favorable properties that render them suitable for application as wound dressings.

Mechanically Robust Poly(vinyl alcohol)-Egg White Composite Hydrogel with Enhancing Biocompatibility by Unidirectional Nanopore Dehydration

A simple and green method, unidirectional nanopore dehydration (UND), directly processes 10% poly(vinyl alcohol) (PVA) aqueous solution containing 20% egg white (EW) into a composite hydrogel membrane (PVA-EW). The tensile strength and elongation of the UND-based PVA-EW at 25 °C were 0.91 MPa and 534.17%, respectively, while the two values at 70 °C were increased by 700 and 38%, respectively. The PVA-EW (70 °C) was still dominated by random coils and α-helical structures. The hydroxyl groups of intramolecules and intermolecules of both PVA and EW could be able to combine and form either more hydrogen bonds or stronger hydrogen bonds. PVA-EW is soft and translucent, has good mechanical properties, and has a porous networked structure with pores that have a diameter of 1-10 μm. L-929 mouse fibroblasts were found to be able to adhere, grow, and proliferate well on the hydrogel composite membrane. This novel PVA-EW biomaterial has potential applications in biomaterials especially medical tissue engineering.

Alginate/polyvinyl alcohol films for wound healing: Advantages and challenges

The skin is the largest organ in the human body and its physical integrity must be maintained for body homeostasis and to prevent the entry of pathogenic microorganisms. Sodium alginate (SA) and polyvinyl alcohol (PVA) are two polymers widely used in films for wound dressing applications. Furthermore, blends between SA and PVA improve physical, mechanical and biological properties of the final wound healing material when compared to the individual polymers. Different drugs have been incorporated into SA/PVA-based films to improve wound healing activity. It is noteworthy that SA/PVA films can be crosslinked with Ca²⁺ or other agents, which improves physicochemical and biological properties. Thus, SA/PVA associations are promising for the biomedical field, as a potential alternative for wound treatment. This review focuses on the main techniques for obtaining SA/PVA films, their physical-chemical characterization, drug incorporation, and the advantages and challenges of these films for wound healing.

Strategies adopted for the preparation of sodium alginate–based nanocomposites and their role as catalytic, antibacterial, and antifungal agents

Alginate extracted from the marine brown algae is a massively utilized biopolymer in multiple fields such as microreactors for the fabrication of metal nanoparticles along with other polymeric and nonpolymeric materials to enhance their mechanical strength. These sodium alginate (Na-Alg)-based fabricated nanocomposites find applications in the field of catalysis and biological treatment as antibacterial/antifungal agent due to the synergistic properties of Na-Alg and fabricated metal nanoparticles (NPs). Na-Alg offers mechanical strength and nanoparticles provide high reactivity due to their small size. Sodium alginate exhibits hydroxyl and carboxylate functional groups that can easily interact with the metal nanoparticles to form composite particles. The research on the preparation of Na-Alg–based nanoparticles and nanoaggregates have been started recently but developed quickly due to their extensive applications in different fields. This review article encircles different methods of preparation of sodium alginate–based metal nanocomposites; analytical techniques reported to monitor the formation of these nanocomposites and used to characterize these nanocomposites as well as applications of these nanocomposites as catalyst, antibacterial, and antifungal agent.

Poly (vinyl alcohol)-alginate as potential matrix for various applications: A focused review

Advances in polymers have made significant contribution in diverse application oriented fields. Multidisciplinary applicability of polymers generates a range of strategies, which is pertinent in a wide range of fields. Blends of natural and synthetic polymers have spawned a different class of materials with synergistic effects. Specifically, poly (vinyl alcohol) (PVA) and alginate (AG) blends (PVAG) have demonstrated some promising results in almost every segment, ranging from biomedical to industrial sector. Combination of PVAG with other materials, immobilization with specific moieties and physical and chemical crosslinking could result in amendments in the structure and properties of the PVAG matrices. Here, we provide an overview of the recent developments in designing PVAG based matrix and complexes with their structural and functional properties. The article also provides a comprehensive outline on the applicability of PVAG matrix in wastewater treatment, biomedical, photocatalysis, food packaging, and fuel cells and sheds light on the challenges that need to be addressed. Finally, the review elaborates the future prospective of PVAG matrices in other unexplored fields like aircraft industry, nuclear science and space exploration.

Strong adsorption properties and mechanism of action with regard to tetracycline adsorption of double-network polyvinyl alcohol-copper alginate gel beads

In the present study, glutaraldehyde was used as a hydrophobic modifier to crosslink polyvinyl alcohol (PVA), and copper ion was immobilized by sodium alginate (SA). Polyvinyl alcohol-copper alginate (PVA-CA) gel beads were prepared by a one-step process, and were used to adsorb and remove tetracycline (TC) from an aqueous solution. The beads were characterized by scanning electron microscopy (SEM), thermogravimetric analysis (TGA), Brunauer-Emmett-Teller (BET) measurement, X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), and Fourier transform infrared spectroscopy (FTIR). The adsorption experiment showed that the optimal pH value of the beads was 5, and that their adsorption met pseudo-second-order kinetic and Langmuir isothermal models. The adsorption thermodynamics experiment showed that the adsorption process was spontaneous and endothermic. Under optimal adsorption conditions, the maximum adsorption capacity for TC of the beads was 231.431 mg/g, which was much higher than that of a single copper alginate matrix. After 5 adsorption-desorption cycles, the adsorption capacity remained high. FTIR and X-ray photoelectron spectroscopy (XPS) revealed that the cation bonding bridge reaction was the main driving force behind the adsorption mechanism. Compared with other reported adsorption materials, the PVA-CA gel beads have high adsorption capacity, a simple preparation process, and excellent recovery performance.

Synthesis, Characterization and Biomedical Application of Silver Nanoparticles

Silver nanoparticles (AgNPs) have been employed in various fields of biotechnology due to their proven properties as an antibacterial, antiviral and antifungal agent. AgNPs are generally synthesized through chemical, physical and biological approaches involving a myriad of methods. As each approach confers unique advantages and challenges, a trends analysis of literature for the AgNPs synthesis using different types of synthesis were also reviewed through a bibliometric approach. A sum of 10,278 publications were analyzed on the annual numbers of publication relating to AgNPs and biological, chemical or physical synthesis from 2010 to 2020 using Microsoft Excel applied to the Scopus publication database. Furthermore, another bibliometric clustering and mapping software were used to study the occurrences of author keywords on the biomedical applications of biosynthesized AgNPs and a total collection of 224 documents were found, sourced from articles, reviews, book chapters, conference papers and reviews. AgNPs provides an excellent, dependable, and effective solution for seven major concerns: as antibacterial, antiviral, anticancer, bone healing, bone cement, dental applications and wound healing. In recent years, AgNPs have been employed in biomedical sector due to their antibacterial, antiviral and anticancer properties. This review discussed on the types of synthesis, how AgNPs are characterized and their applications in biomedical field.

Seaweed Polysaccharide in Food Contact Materials (Active Packaging, Intelligent Packaging, Edible Films, and Coatings)

Food contact materials (FCMs) are materials that come in contact with food products such as food packaging which play a significant role in the food quality and safety. Plastic, which is a major food packaging material, harms the eco-system, wildlife, and the environment. As a result, numerous researches have been in progress on alternative polymers, which has similar properties as plastic but is also environmentally friendly (biodegradable). In recent years, the utilization of seaweed polysaccharides has piqued interest due to its biodegradability, non-toxicity, antioxidant capabilities, and excellent film formation ability. However, it has a number of drawbacks such as low tensile strength, water solubility, and moderate antibacterial characteristics, among others. The addition of other biopolymers, nanoparticles, or natural active agents improves these features. In this review article, we have summarized the current state of seaweed polysaccharide research in active packaging, intelligent packaging, edible films, and coatings. It also highlights the physical, thermal, antioxidant, and other properties of these materials. Finally, the article discusses the relevant legislation as well as the field’s future prospects. Research shows that seaweeds polysaccharide looks promising as a sustainable food contact material, but there is always a potential for development to make it market feasible.

A New Dermal Substitute Containing Polyvinyl Alcohol with Silver Nanoparticles and Collagen with Hyaluronic Acid: In Vitro and In Vivo Approaches

The experimental use of poly (alcohol-vinyl) (PVA) as a skin curative is increasing widely. However, the use of this hydrogel is challenging due to its favorable properties for microbiota growth. The association with silver nanoparticles (AgNPs) as an antimicrobial agent turns the match for PVA as a dressing, as it focuses on creating a physical barrier to avoid wound dehydration. When associated with extracellular components, such as the collagen matrix, the device obtained can create the desired biological conditions to act as a skin substitute. This study aimed to analyze the anti-microbiological activity and the in vitro and in vivo responses of a bilaminar device of PVA containing AgNPs associated with a membrane of collagen-hyaluronic acid (col-HA). Additionally, mesenchymal stem cells were cultured in the device to evaluate in vitro responses and in vivo immunomodulatory and healing behavior. The device morphology revealed a porous pattern that favored water retention and in vitro cell adhesion. Controlled wounds in the dorsal back of rat skins revealed a striking skin remodeling with new epidermis fulfilling all previously injured areas after 14 and 28 days. No infections or significant inflammations were observed, despite increased angiogenesis, and no fibrosis-markers were identified as compared to controls. Although few antibacterial activities were obtained, the addition of AgNPs prevented fungal growth. All results demonstrated that the combination of the components used here as a dermal device, chosen according to previous miscellany studies of low/mid-cost biomaterials, can promote skin protection avoiding infections and dehydration, minimize the typical wound inflammatory responses, and favor the cellular healing responses, features that give rise to further clinical trials of the device here developed.

A visual bi-layer indicator based on roselle anthocyanins with high hydrophobic property for monitoring griskin freshness

This study designed a new type indicator with hydrophobic Polyvinylidene Fluoride (PVDF) film as a moisture prevent-layer. And the sensor layer was provided based on polyvinyl alcohol/Sodium alginate (PS) and Roselle anthocyanins (RAs). Physical properties, microstructure, and color stability of the bi-layer indicator have been investigated. The Water contact angle (WCA) of PS/RAs/ PVDF film (PSRF) was 108.85°, which can be considered as an excellent hydrophobic surface. The lowest Water Vapor Permeability (WVP) value of PSRF exhibited a good barrier property for moisture. Therefore, PSRF film was used to monitor the griskin freshness. The Total volatile basic nitrogen (TVB-N) level was increased to 18.02 mg/100 g at 72 h, and the color of the indicator presented visible color changes. The acquired results revealed a good correlation between TVB-N, pH and color change of the indicator. The research indicated that PSRF indicator has increasing potential application on food intelligent packaging.

High performance of alginate/polyvinyl alcohol composite film based on natural original melanin nanoparticles used as food thermal insulating and UV-vis block

Light is a major factor in promoting food aging and deterioration, especially for ultraviolet (UV) light. Herein, bioinspired dopamine-melanin solid nanoparticles with strong absorption at a wide range of 200-2500 nm were first incorporated into alginate/polyvinyl alcohol to fabricate film materials in this work for UV-vis block, and this also brings excellent thermal insulating properties to the materials. In addition, in order to obtain a material with excellent performance, particles of uniform size of about 100 nm are obtained by fractional centrifugation. It was found the mechanical, UV-vis block and thermal insulating properties were improved significantly compared with the control samples. This study provides a strategy to design a non-polluting, biodegradable, biocompatible film with excellent mechanical properties that can be used in UV-vis barriers and has potential applications in thermal insulating materials for food preservation.

Poly (vinyl alcohol)/nano-diamond composite films and hydrogels prepared by gamma ray

Poly (vinyl alcohol) and nano-diamond, PVA/ND, hydrogels were prepared and assessed as prosthetic material suitable for replacement of the nucleus pulposus. The hydrogels were prepared by gamma irradiation at various doses (15 kGy, 25 kGy, 35 kGy, 45 kGy) and at various ND concentrations ranging from 0.25 wt.% to 3 wt.%. Extent of gelation, equilibrium water content, and viscoelastic properties of swelled hydrogels at definite water contents were measured and examined as a function of ND concentration as well as gamma dose. According to viscoelastic measurements, the strength of hydrogels increased considerably over that of pure PVA at a low concentration of ND. By increasing irradiation dose, gel percent and strength of hydrogels increased. Hydrogel water content was in a range of 80 wt.% to 90 wt.% similar to that of natural nucleus pulposus. The G″ values of hydrogels were much smaller than G′ values indicating elastic behavior. Also PVA/ND nanocomposite films were prepared at various ND concentrations by solution casting. The ND particles were uniformly distributed within PVA films. Tensile modulus and strength of the films increased over pure PVA.

Biomedical Applications of Silver Nanoparticles: An Up-to-Date Overview

During the past few years, silver nanoparticles (AgNPs) became one of the most investigated and explored nanotechnology-derived nanostructures, given the fact that nanosilver-based materials proved to have interesting, challenging, and promising characteristics suitable for various biomedical applications. Among modern biomedical potential of AgNPs, tremendous interest is oriented toward the therapeutically enhanced personalized healthcare practice. AgNPs proved to have genuine features and impressive potential for the development of novel antimicrobial agents, drug-delivery formulations, detection and diagnosis platforms, biomaterial and medical device coatings, tissue restoration and regeneration materials, complex healthcare condition strategies, and performance-enhanced therapeutic alternatives. Given the impressive biomedical-related potential applications of AgNPs, impressive efforts were undertaken on understanding the intricate mechanisms of their biological interactions and possible toxic effects. Within this review, we focused on the latest data regarding the biomedical use of AgNP-based nanostructures, including aspects related to their potential toxicity, unique physiochemical properties, and biofunctional behaviors, discussing herein the intrinsic anti-inflammatory, antibacterial, antiviral, and antifungal activities of silver-based nanostructures.

Polysaccharide and poly(methacrylic acid) based biodegradable elastomeric biocompatible semi-IPN hydrogel for controlled drug delivery

Nanoparticles embedded semi-interpenetrating (semi-IPNs) polymeric hydrogels with enhanced mechanical toughness and biocompatibility could have splendid biomedical acceptance. Here we propose poly(methacrylic acid) grafted polysaccharide based semi-IPNs filled with nanoclay via in situ Michael type reaction associated with covalent crosslinking with N,N-methylenebisacrylamide (MBA). The effect of nanoclay in the semi-IPN hydrogel has been investigated which showed significant improvement of mechanical robustness. Meanwhile, the hydrogels showed reversible ductility up to 70% in response to cyclic loading-unloading cycle which is an obvious phenomenon of rubber-like elasticity. The synthesized semi-IPN hydrogel show biodegradability and non-cytotoxic nature against human cells. The live-dead assay showed that the prepared hydrogel is a viable platform for cell growth without causing severe cell death. The in vitro drug release study in psychological pH (pH = 7.4) reveals that the controlled drug release phenomena can be tuned by simulating the environment pH. Such features in a single hydrogel assembly can propose this as high performance; biodegradable and non-cytotoxic 3D scaffold based promising biomaterial for tissue engineering.

Preparation and Characterization of Silver Sulfadiazine-Loaded Polyvinyl Alcohol Hydrogels as an Antibacterial Wound Dressing

In this study, we prepared a series of silver sulfadiazine (AgSD)-loaded polyvinyl alcohol (PVA) hydrogels via electron beam (e-beam) irradiation. Our objective was to explore the influence of e-beam irradiation on the chemical structure and crystallinity of AgSD and the antibacterial properties of AgSD/PVA hydrogels. Prior to irradiation, we mixed AgSD in PVA solution in 2 forms, either suspended in water (WS) or dissolved in ammonia solution (AS). We noted that nano silver was released from AgSD/PVA-AS hydrogels immersed in deionized water, while it would not happen in AgSD/PVA-WS hydrogels. Both kinds of AgSD/PVA hydrogels exhibited good antibacterial activities against gram-negative Escherichia coli and gram-positive Staphylococcus aureus. And their antibacterial activity was not obviously affected by different dosages of e-beam irradiation. Moreover, the antibacterial activity of the AgSD/PVA-WS hydrogels was stronger than that of AgSD/PVA-AS. Accordingly, the cell cytotoxicity of the AgSD/PVA-WS hydrogels was higher than that of AgSD/PVA-AS. Our study results reveal that e-beam irradiation of PVA solution with dispersed AgSD is a simple and efficient way to prepare AgSD/PVA hydrogels, which might be an ideal antibacterial wound dressing.

An asymmetric wettable chitosan–silk fibroin composite dressing with fixed silver nanoparticles for infected wound repair: in vitro and in vivo evaluation

The treatment of large-area infected wounds remains a significant challenge, as there is no effective wound dressing for infected wound healing applicable to clinical applications.

Anti-microbial surfaces: An approach for deposition of ZnO nanoparticles on PVA-Gelatin composite film by screen printing technique

Initially micro-organisms get exposed to the surfaces, this demands development of anti-microbial surfaces to inhibit their proliferation. Therefore, herein, we attempt screen printing technique for development of PVA-GE/ZnO nanocomposite (PG/ZnO) films. The synthesis of PG/ZnO nanocomposite includes two steps as: (i) Coating of Zinc Oxide nanoparticles (ZnO NPs) by poly ethylene glycol in order to be compatible with organic counterparts. (ii) Deposition of coated nanoparticles on the PG film surface. The results suggest the enhancement in anti-microbial activity of PG/ZnO nanocomposite over pure ZnO NPs against both Gram positive Bacillus subtilis and Gram negative Escherichia coli from zone of inhibition. The uniformity in deposition is further confirmed by scanning electron microscopy (SEM) images. The phase identification of ZnO NPs and formation of PG/ZnO nanocomposite has been confirmed by X-ray diffraction (XRD) analysis and UV-vis spectroscopy (UV-vis). The Attenuated total reflection Spectroscopy (ATR) analysis indicates the ester bond between PVA and gelatin molecules. The thermal stability of nanocomposite is studied by thermogravimetric analysis (TGA) revealing increase in crystallinity due to ZnO NPs which could be utilized to inhibit the growth of micro-organisms. The tensile strength is found to be higher and percent elongation is double of PG/ZnO nanocomposite than PG composite film.

An update on polysaccharide-based nanomaterials for antimicrobial applications

Scientific community has made a lot of efforts to combat the infectious diseases using antimicrobial agents, but these are associated with problems of development of multi-drug resistance and their adverse side effects. To tackle these challenges, nanocarrier-based drug delivery system using polysaccharides has received enormous attention in the past few years. These antimicrobial agents can become more efficacious when adsorbed, entrapped, or linked to polysaccharides. In addition, these nanocarrier-based systems provide an increase in the surface area of the drug and are able to achieve the targeted drug delivery as well as used for the synthesis of packaging materials with improved mechanical strength, barrier, and antimicrobial properties. This review focuses on potential therapeutic applications of nanocarrier-based drug delivery systems using polysaccharides for antimicrobial applications.

PVA-reinforced glutathione–Ag hydrogels and release of Ag nanoparticles and drugs by UV-triggered controllable disassembly

Macromolecular chains of PVA efficiently supported the three-dimensional network structure of GSH–Ag gels, remarkably improving their thermal stability and mechanical strength and the controllable release of Ag NPs and drugs through UV-triggered gradual disassembly of GSH–Ag.

Synthesis of polydopamine-coated halloysite nanotube-based hydrogel for controlled release of a calcium channel blocker

A stimuli-triggered drug delivery vehicle has been synthesized by self-polymerization of dopamine (DA) on the outer surface of halloysite nanotubes (HNT) followed by gelationviaalginate.

Composites of Polymer Hydrogels and Nanoparticulate Systems for Biomedical and Pharmaceutical Applications

Due to their unique structures and properties, three-dimensional hydrogels and nanostructured particles have been widely studied and shown a very high potential for medical, therapeutic and diagnostic applications. However, hydrogels and nanoparticulate systems have respective disadvantages that limit their widespread applications. Recently, the incorporation of nanostructured fillers into hydrogels has been developed as an innovative means for the creation of novel materials with diverse functionality in order to meet new challenges. In this review, the fundamentals of hydrogels and nanoparticles (NPs) were briefly discussed, and then we comprehensively summarized recent advances in the design, synthesis, functionalization and application of nanocomposite hydrogels with enhanced mechanical, biological and physicochemical properties. Moreover, the current challenges and future opportunities for the use of these promising materials in the biomedical sector, especially the nanocomposite hydrogels produced from hydrogels and polymeric NPs, are discussed.

Synthesis and antimicrobial activity of polysaccharide alginate derived cationic surfactant-metal(II) complexes

New natural polysaccharide carbohydrate derivatives of sodium alginate surfactant and its cobalt, copper and zinc complexes were synthesized. Structures of the synthesized compounds are reported using FTIR, (1)H NMR and UV-vis. The critical micelle concentration (CMC) value of the alginate surfactant and its metal complexes in aqueous solution was found out from surface tension measurements. Surface tension data at different temperatures served for the evaluation of the temperature-dependent CMC and the thermodynamics of micellization (ΔGmic, ΔHmic, ΔSmic) and adsorption (ΔGads, ΔGads, ΔSads). The surface activities of the synthesized polymeric surfactant and its metal complexes were influenced by their chemical structures and the type of the transition metals. These compounds were evaluated against Gram-positive bacteria (Bacillus subtilis and Staphylococcus aureus), Gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa) and fungi (Candida albicans and Asperigllus niger). The antibacterial and antifungal screening tests of the alginate surfactant metal complexes have shown good results compared to its precursor alginate surfactant.

Adsorption and photocatalyst assisted dye removal and bactericidal performance of ZnO/chitosan coating layer

Pure chitosan and its zinc oxide composite coatings were applied on microfibriller cellulose mat (MCM) to prepare chitosan coated microfibriller cellulose (Chi-MCM) and zinc oxide/chitosan coated microfibriller cellulose (ZnO/Chi-MCM), respectively. X-ray diffraction (XRD), and scanning electron microscopy (SEM), were used to characterize the samples in this study. SEM images showed that dense chitosan solutions (3 and 5wt%) made a thick layer over MCM while diluted solution (1wt%) resulted in wrapping of the chitosan over the individual microfibers and avoided the thick layer formation. Removal of an azo dye methyl orange (MO) from aqueous solution using adsorption and combined adsorption with photodegradation activity of the Chi-MCM and ZnO/Chi-MCM were evaluated, respectively. Compared in the absence of UV light, ZnO/Chi-MCM showed faster and higher degree of dye removal by photocatalytic dissociation and adsorption under ultraviolet irradiation. Various parameters including pH of MO solution and its initial concentration were tested for the removal of MO dye. ZnO/Chi-MCM showed maximum adsorption capacity of 42.8mg/g. Antibacterial activities were also evaluated where ZnO/Chi-MCM displayed a remarkable performance inhibiting the Escherichia coli growth.