Chromium (VI) detoxification by oxidation and flocculation of exopolysaccharides from Arthrobacter sp. B4

Understanding Chromium Slag Recycling with Sintering-Ironmaking Processes: Influence of Cr2O3 on the Sinter Microstructure and Mechanical Properties of the Silico-Ferrite of Calcium and Aluminum (SFCA)

Chromium slag is a solid waste of chromium salt production, which contains highly toxic Cr(VI) and significant amounts of valuable metals, such as Fe and Cr. Recycling chromium slag as a raw sintering material in sintering-ironmaking processes can simultaneously reduce toxic Cr(VI) and recover valuable metals. A micro-sintering experiment, compressive strength test, microhardness test, and first-principles calculation are performed to investigate the influence of Cr2O3 on the sintering microstructure and mechanical properties of the silico-ferrite of calcium and aluminum (SFCA) in order to understand the basis of the sintering process with chromium slag addition. The results show that the microstructure of SFCA changes from blocky to interwoven, with further increasing Cr2O3 content from 0 wt% to 3 wt%, and transforms to blocky with Cr2O3 content increasing to 5 wt%. Cr2O3 reacts with Fe2O3 to form (Fe1-xCrx)2O3 (0 ≤ x ≤ 1), which participates in forming SFCA. With the increase in Cr doping concentrations, the hardness of SFCA first decreases and then increases, and the toughness increases. When Cr2O3 content increases from 0 wt% to 3 wt%, the SFCA microhardness decreases and the compressive strength of the sintered sample increases. Further increasing Cr2O3 contents to 5 wt%, the SFCA microhardness increases, and the compressive strength of sintered sample decreases.

The antibiofilm potential of a heteropolysaccharide produced and characterized from the isolated marine bacterium Glutamicibacter nicotianae BPM30

Biofilms are the significant causes of 80% of chronic infections in the oral cavity, urinary tract, biliary tube, lungs, gastrointestinal tract, and so on to the general public. Treatment of pathogenic biofilm using bacterial exopolysaccharides (EPS) is an effective and promising strategy. In the present work, a marine bacterium was isolated, studied for exopolysaccharide production, and tested for its antibiofilm activity. Approximately 1.31 ± 0.07 g/L of a purified extracellular polysaccharide was produced and characterized from the isolated marine bacterium Glutamicibacter nicotianae BPM30. The hydrolyzed EPS contains multiple monosaccharides such as rhamnose, fructose, glucose, and galactose. The EPS demonstrated potential antibiofilm activity on four tested pathogens in a concentration-dependent mode. The antibiofilm activity of the purified EPS was studied by crystal violet assay and fluorescence staining method. Comparative inhibition results obtained for the tested strains are 93.25% ± 5.25 and 88.56% ± 2.25 for K. pneumoniae; 92.65% ± 7.6 and 98.33% ± 0.85 for P. aeruginosa; 90.36% ± 6.3 and 52.08% ± 7.74 for S. typhi; 84.62% ± 5.6 and 77.90% ± 5.90 for S. dysenteriae. The results of the present work demonstrated the antibiofilm potential of EPS, which could be helpful in the invention of novel curative approaches in battling bacterial biofilm-related medical complications.

Sensitivity of Zea mays and Soil Microorganisms to the Toxic Effect of Chromium (VI)

Chromium is used in many settings, and hence, it can easily enter the natural environment. It exists in several oxidation states. In soil, depending on its oxidation-reduction potential, it can occur in bivalent, trivalent or hexavalent forms. Hexavalent chromium compounds are cancerogenic to humans. The aim of this study was to determine the effect of Cr(VI) on the structure of bacteria and fungi in soil, to find out how this effect is modified by humic acids and to determine the response of Zea mays to this form of chromium. A pot experiment was conducted to answer the above questions. Zea mays was sown in natural soil and soil polluted with Cr(VI) in an amount of 60 mg kg-1 d.m. Both soils were treated with humic acids in the form of HumiAgra preparation. The ecophysiological and genetic diversity of bacteria and fungi was assayed in soil under maize (not sown with Zea mays). In addition, the following were determined: yield of maize, greenness index, index of tolerance to chromium, translocation index and accumulation of chromium in the plant. It has been determined that Cr(VI) significantly distorts the growth and development of Zea mays, while humic acids completely neutralize its toxic effect on the plant. This element had an adverse effect on the development of bacteria of the genera Cellulosimicrobium, Kaistobacter, Rhodanobacter, Rhodoplanes and Nocardioides and fungi of the genera Chaetomium and Humicola. Soil contamination with Cr(VI) significantly diminished the genetic diversity and richness of bacteria and the ecophysiological diversity of fungi. The negative impact of Cr(VI) on the diversity of bacteria and fungi was mollified by Zea mays and the application of humic acids.

The role of microplastics biofilm in accumulation of trace metals in aquatic environments

Microplastics are one of the major contaminants of aquatic nature where they can interact with organic and inorganic pollutants, including trace metals, and adsorb them. At the same time, after the microplastics have entered the aquatic environments, they are quickly covered with a biofilm - microorganisms which are able to produce extracellular polymeric substances (EPS) that can facilitate sorption of trace metals from surrounding water. The microbial community of biofilm contains bacteria which synthesizes EPS with antimicrobial activity making them more competitive than other microbial inhabitants. The trace metal trapping by bacterial EPS can inhibit the development of certain microorganisms, therefore, a single microparticle participates in complex interactions of the diverse elements surrounding it. The presented review aims to consider the variety of interactions associated with the adsorption of trace metal ions on the surface of microplastics covered with biofilm, the fate of such microplastics and the ever-increasing risk to the environment caused by the combination of these large-scale pollutants - microplastics and trace metals. Since aquatic pollution problems affect the entire planet, strict regulation of the production, use, and disposal of plastic materials is needed to mitigate the effects of this emerging pollutant and its complexes could have on the environment and human health.

Maximizing EPS production from Pseudomonas aeruginosa and its application in Cr and Ni sequestration

Heavy metal contamination of water bodies has been a cause of grave concern around the globe. Analysis of various industrial effluents has revealed a perilous level of Cr (VI) and Ni (II). Pseudomonas aeruginosa is an extracellular polymeric substances (EPSs) producing bacterium. EPS has a great potential in the sequestration of heavy metal ions. In the present study efforts have been made to understand the effect of time, pH, and temperature on production of EPS by P. aeruginosa (MTCC 1688). The extracted EPS has been applied for removal of Ni (II) and Cr (VI) ions from aqueous system. The results revealed that highest EPS yield (26 mg/50 mL) can be obtained after 96 h of incubation at pH 6 and 32 °C temperature in 50 mL of culture. Treatment of 10 mg/L Cr (VI) and Ni (II) with 30 mg/L EPS resulted in the removal of 26% and 9% of Cr (VI) and Ni (II), respectively. Fourier-transform infrared spectral analysis revealed the involvement of –OH, –NH, C–O, diketone, and ester functional groups of EPS in the attachment of Cr (VI) ion while involvement of amide and –C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]>O groups in Ni (II) binding with EPS. Scaling-up the production of EPS using bioreactor may further help in developing an efficient process for treatment of water polluted with Cr and Ni.

•

Culture conditions for the highest EPS production by Pseudomonas aeruginosa have been optimized.

•

The highest EPS yield (26 mg/50 mL) can be obtained after 96 h of incubation at pH 6 and 32 °C temperature.

•

Treatment of contaminated water with EPS resulted in removal of 26% and 9% of Cr (VI) and Ni (II), respectively.

•

FTIR studies revealed the involvement of –OH, –NH, C–O, diketone, and ester groups of EPS in the attachment of Cr (VI) ion.

•

FTIR studies revealed the involvement of amide and –CO groups in Ni (II) binding with EPS.

Fermentation conditions optimization, purification, and antioxidant activity of exopolysaccharides obtained from the plant growth-promoting endophytic actinobacterium Glutamicibacter halophytocola KLBMP 5180

In this study, an endophytic actinobacterium Glutamicibacter halophytocola KLBMP 5180, was investigated for the production and antioxidant activity of exopolysaccharides (EPSs). First, the suitable fermentation time, temperature, inoculation volume, pH value, and the carbon and nitrogen sources for EPSs production were obtained using the one variable at a time method (OVAT). Then, a central composition design was used for fermentation conditions optimization to obtain the maximum EPS yield. The optimal medium and condition were as follows: 100 mL broth in 250 mL Erlenmeyer flasks, including 3.65 g/L maltose, 9.88 g/L malt extract, 3.40 g/L yeast extract, 1.41 g/L MnCl₂, pH 7.5, culture temperature 28 °C, and 200 rpm for 7 days, which increased the yield of EPSs to 2.89 g/L. Two purified EPSs, 5180EPS-1 (MW 58.9 kDa) and 5180EPS-2 (10.5 kDa), comprising rhamnose, galacturonic acid, glucose, glucuronic acid, xylose, and arabinose, were obtained for chemical analysis and antioxidant evaluation. The scavenging ability and reducing power of the superoxide anion and hydroxyl radicals demonstrated the moderate in vitro antioxidant activities of the two EPSs, thus indicating their potential to be a new source of natural antioxidants. However, further structure elucidation and functional studies need to be continued.

Speciation Distribution of Heavy Metals in Uranium Mining Impacted Soils and Impact on Bacterial Community Revealed by High-Throughput Sequencing

This study investigated the influence of heavy metals on bacterial community structure in a uranium mine. Soils from three differently polluted ditches (Yangchang ditch, Zhongchang ditch, and Sulimutang ditche) were collected from Zoige County, Sichuan province, China. Soil physicochemical properties and heavy metal concentrations were measured. Differences between bacterial communities were investigated using the high-throughput sequencing of the 16S rRNA genes. The obtained results demonstrated that bacterial richness index (Chao and Ace) were similar among three ditches, while the highest bacterial diversity index was detected in the severely contaminated soils. The compositions of bacterial communities varied among three examined sites, but Proteobacteria and Acidobacteria were abundant in all samples. Redundancy analysis revealed that soil organic matter, Cr and pH were the three major factors altering the bacterial community structure. Pearson correlation analysis indicated that the most significant correlations were observed between the contents of non-residual Cr and the abundances of bacterial genera, including Thiobacillus, Nitrospira, and other 10 genera. Among them, the abundances of Sphingomonas and Pseudomonas were significant and positively correlated with the concentrations of non-residual U and As. The results highlighted the factors influencing the bacterial community in uranium mines and contributed a better understanding of the effects of heavy metals on bacterial community structure by considering the fraction of heavy metals.

Carbon-dependent chromate toxicity mechanism in an environmental Arthrobacter isolate

Arthrobacter spp. are widespread in soil systems and well-known for their Cr(VI) reduction capabilities making them attractive candidates for in situ bioremediation efforts. Cellulose drives carbon flow in soil systems; yet, most laboratory studies evaluate Arthrobacter-Cr(VI) interactions solely with nutrient-rich media or glucose. This study aims to determine how various cellulose degradation products and biostimulation substrates influence Cr(VI) toxicity, reduction, and microbial growth of an environmental Arthrobacter sp. isolate. Laboratory culture-based studies suggest there is a carbon-dependent Cr(VI) toxicity mechanism that affects subsequent Cr(VI) reduction by strain LLW01. Strain LLW01 could only grow in the presence of, and reduce, 50 μM Cr(VI) when glucose or lactate were provided. Compared to lactate, Cr(VI) was at least 30-fold and 10-fold more toxic when ethanol or butyrate was the sole carbon source, respectively. The addition of sulfate mitigated toxicity somewhat, but had no effect on the extent of Cr(VI) reduction. Cell viability studies indicated that a small fraction of cells were viable after 8 days suggesting cell growth and subsequent Cr(VI) reduction may resume. These results suggest when designing bioremediation strategies with Arthrobacter spp. such as strain LLW01, carbon sources such as glucose and lactate should be considered over ethanol and butyrate.

Influence of Zn(II) stress-induction on component variation and sorption performance of extracellular polymeric substances (EPS) from Bacillus vallismortis

Bacillus vallismortis (B. vallismortis), an aerobic heterotrophic bacteria, was screened in a laboratory pilot study, to assess the interaction between the heavy metal Zn(II) and extracellular polymeric substances (EPS). The influence of Zn(II) stress on EPS production, component variation, and sorption performance, was investigated. The characteristics of B. vallismortis EPS formed under stress were analyzed using FTIR, 3D-EEM and XPS. EPS was used as an adsorbent and the adsorption capacity and adsorption behavior of EPS formed with and without Zn(II) stress, were compared and assessed. Results showed that the production of polysaccharides and proteins, the main components of EPS, were promoted under Zn(II) stress. The types of EPS functional groups observed remained the same with and without heavy metal stress, but their concentrations were increased. Due to stress-induction, the adsorption capacity of Zn-EPS was significantly enhanced compared with the control-EPS. Specific EPS produced by B. vallismortis in the presence of Zn(II) stress, could have a wide range of potential applications, allowing optimization and improvement of the capacity of EPS to remove heavy metals from effluent.

Spatial distribution of vanadium and microbial community responses in surface soil of Panzhihua mining and smelting area, China

Spatial distribution of vanadium in surface soils from different processing stages of vanadium-bearing titanomagnetite in Panzhihua mining and smelting area (China) as well as responses of microbial communities including bacteria and fungi to vanadium were investigated by fieldwork and laboratory incubation experiment. The vanadium contents in this region ranged from 149.3 to 4793.6 mg kg^-1, exceeding the soil background value of vanadium in China (82 mg kg^-1) largely. High-throughput DNA sequencing results showed bacterial communities from different manufacturing locations were quite diverse, but Bacteroidetes and Proteobacteria were abundant in all samples. The contents of organic matter, available P, available S and vanadium had great influences on the structures of bacterial communities in soils. Bacterial communities converged to similar structure after long-term (240 d) cultivation with vanadium containing medium, dominating by bacteria which can tolerate or reduce toxicities of heavy metals. Fungal diversities decreased after cultivation, but Ascomycota and Ciliophora were still the most abundant phyla as in the original soil samples. Results in this study emphasize the urgency of investigating vanadium contaminations in soils and provide valuable information on how vanadium contamination influences bacterial and fungal communities.

Optimization of Extracellular Polymeric Substances production using Azotobacter beijreinckii and Bacillus subtilis and its application in chromium (VI) removal

Extracellular Polymeric Substances (EPS) of microbial origin are complex biopolymers and vary greatly in their chemical composition. They have a great potential in chelation of metal ions. In this work, the effect of growth phase, temperature and pH on production of EPS by two bacteria Azotobacter beijreinckii and Bacillus subtilis have been studied. Extracted EPS was used to remove Cr(VI) from aqueous system. A. beijreinckii produced maximum EPS after 24h at pH 7 and temperature 30°C while B. subtilis produced maximum EPS after 96h at pH 7 and temperature 37°C. For an initial concentration of 10ppm, 26% and 48% Cr(VI) removal was recorded for EPS derived from A. beijreinckii and B. subtilis respectively. The presence of functional groups on EPS and their interaction with Cr(VI) was confirmed using Fourier-transform infrared (FTIR) spectra analysis. In both the bacteria, carboxyl and phosphate groups show involvement in metal binding.