Nano-encapsulation of olive leaf phenolic compounds through WPC–pectin complexes and evaluating their release rate

Plant-derived polyphenolic compounds: nanodelivery through polysaccharide-based systems to improve the biological properties

Plant-derived polyphenols are naturally occurring compounds widely distributed in plants. They have received greater attention in the food and pharmaceutical industries due to their potential health benefits, reducing the risk of some chronic diseases due to their antioxidant, anti-inflammatory, anticancer, cardioprotective, and neuro-action properties. Polyphenolic compounds orally administered can be used as adjuvants in several treatments but with restricted uses due to chemical instability. The review discusses the different structural compositions of polyphenols and their influence on chemical stability. Despite the potential and wide applications, there is a need to improve the delivery of polyphenolics to target the human intestine without massive chemical modifications. Oral administration of polyphenols is unfeasible due to instability, low bioaccessibility, and limited bioavailability. Nano-delivery systems based on polysaccharides (starch, pectin, chitosan, and cellulose) have been identified as a viable option for oral ingestion, potentiate biological effects, and direct-controlled delivery in specific tissues. The time and dose can be individualized for specific diseases, such as intestinal cancer. This review will address the mechanisms by which polysaccharides-based nanostructured systems can protect against degradation and enhance intestinal permeation, oral bioavailability, and the potential application of polysaccharides as nanocarriers for the controlled and targeted delivery of polyphenolic compounds.

Improving the efficacy of phenolic extract from Pimpinella affinis in edible oils through nanoencapsulation: Utilizing chitosan and Salvia macrosiphon gum as coating agents

In the present study, a phenolic extract derived from the Pimpinella affinis plant underwent nanoencapsulation. The nanoencapsulation process employed chitosan, Salvia macrosiphon gum (SMG), and a chitosan-SMG complex (1:1) (CCS) as coating agents. The evaluation of nanoemulsions encompassed measurements of particle size, polydispersity index (PDI), ζ-potential, encapsulation efficiency, and intensity distribution parameters. The overall results of these assessments indicated that the nanoemulsion coated with CCS exhibited the most favorable characteristics when compared to other treatments. Subsequently, this specific nanoencapsulated sample was utilized to enhance the oxidative stability of canola oil at concentrations of 100, 200, and 300 ppm (parts per million). Oxidative stability tests, assessed through the total oxidation value (TOTOX) index, highlighted the superior performance of the nanoencapsulated extract, particularly at a concentration of 300 ppm. This enhancement can be attributed to the increased release of phenolic compounds from the CCS coating into the canola oil. The findings illustrate that the nanoencapsulation process can significantly enhance the efficacy of P. affinis extract in improving the oxidative stability of canola oil.

Nanoemulsions of red quinoa and ginseng extracts with chitosan wall: Investigating the antioxidant properties and its effect on the shelf life of dairy cream

The study aimed to investigate the antioxidant properties of ginseng and red quinoa extract nanoemulsion and its effect on the shelf life of dairy cream. Nanoemulsion includes dairy cream, Tween 80, chitosan, whey protein powder, chitosan/whey protein powder, red quinoa extract, ginseng extract, and a mixture of extracts (1:1). The highest total phenol content and total flavonoid content were related to ginseng extract (24,009.55 mg of gallic acid equivalent/kg, 883.16 mg quercetin/kg) with ethanol-water solvent (80:20). Most of the phenolic and flavonoid compounds of ginseng and red quinoa extracts were related to p-coumaric acid (211.3 μg/g), catechin (29.6 μg/g), ellagic acid (73.88 μg/g), and rutin (34.12 μg/g), respectively. Considerable antioxidant power in the concentration of 800 ppm of red quinoa and ginseng extracts (ethanol-water solvent (50:50), (80:20)) in 2,2-diphenyl-1-picrylhydrazyl radical scavenging (80%, 82%, 80%, and 78%), bleaching β-carotene: linoleic acid (81%, 73%, 77%, and 86%), and ferric reducing antioxidant power assays (70%, 73%, 72%, and 76%) was observed. Nanoemulsions of red quinoa extract with chitosan wall had the smallest particle size (250.67 nm), the highest encapsulation efficiency (72.79%), and the polydispersity index (0.34). Nanoemulsions containing ginseng + quinoa (1:1) with chitosan/whey protein powder wall showed the highest viscosity (5.30 mPa/s) and the mostzeta potential (-32.6 mv). Also, nanoemulsions of red quinoa extract showed the lowest amount of peroxide value and the thiobarbituric acid value (12 milliequivalent O2/kg-0.48 μg/mL) in dairy cream oil. In general, the red quinoa extract with chitosan wall was superior to other samples due to the delay in oxidation and positive effect on the shelf life of dairy cream.

Chitosan-coated nanoliposome: An approach for simultaneous encapsulation of caffeine and roselle-anthocyanin in beverages

The objective of the present research was to develop chitosan-coated nanoliposomes using a modified heating method as a delivery system for simultaneous encapsulation of caffeine and roselle anthocyanin to fortify beverage. Response surface methodology was used to ascertain the optimized formulation, aiming to maximize the encapsulation efficiency, minimize the particle size, and maximize the zeta potential. The liposomes fabricated under the optimized conditions (lecithin to cholesterol ratio of 13 and wall to core ratio of 2.16) showed encapsulation efficiency values of 66.73 % for caffeine and 97.03 % for anthocyanin, with a size of 268.1 nm and a zeta potential of -39.11 mV. Fourier transform infrared spectroscopy confirmed the formation of hydrogen bonds between the polar sites of lecithin and the loaded core compounds. Thermal analysis suggested the successful encapsulation of the caffeine and anthocyanin. Transmission and scanning electron microscopy images confirmed a uniform spherical shape with a smooth surface. Fortifying the model beverage with the liposome and the chitosan-coated nanoliposome revealed higher values of encapsulation efficiency of anthocyanin (70.33 ± 3.11 %), caffeine (86.37 ± 2.17 %) and smaller size (280.5 ± 0.74 nm) of the chitosan-coated nanoliposomes at the end of 60the days. A hedonic sensory test of the fortified beverage with chitosan-coated nanoliposomes confirmed an improvement in the organoleptic properties of the beverage by masking its bitterness (receiving three more sensory scores in perceiving the bitterness intensity). Overall, our study indicates that the high potential of the chitosan-coated nanoliposomes for the simultaneous loading of the caffeine and anthocyanin, as well as their possible application in food and beverage formulations.

Enhancing canola oil's shelf life with nano-encapsulated Mentha aquatica extract for optimal antioxidant performance

Incorporation of antioxidants, such as phenolic compounds into edible oils has limitations such as rapid release of phenolic compounds, low solubility, low penetration, low accessibility, and rapid degradation by environmental compounds. To solve this problem, the nano-encapsulation process is offering promising opportunities. In this research, for the first time, the phenolic extract of Mentha aquatica was nano-encapsulated in nano-emulsions coated with chitosan, Lepidium perfoliatum gum (LPG), and complex of chitosan and LPG (CCL) (1:1 ratio). Based on various tests (particle size measurement, ζ-potential, polydispersity index, encapsulation efficiency index, and intensity curve), the LPG coating was the most optimum option for nano-encapsulation compared to the other coatings. Thus, the LPG-assisted nano-encapsulated phenolic extract of M. aquatica was used to improve the oxidative stability of canola oil at three concentrations (100, 200, and 300 ppm). The results of peroxide value and anisidine index tests (as initial and secondary oxidation indicators, respectively) showed that the nano-encapsulation improved the antioxidant effect of M. aquatica when compared with free extract in canola oil. In a comparative approach, the best sample was obtained from the LPG-assisted nano-encapsulated extract (200 ppm) due to the release of more phenolic compounds. The findings from this study showcase how nano-encapsulation enhances the efficacy of antioxidants in edible oils.

Nanoencapsulation of crocin in double-layer emulsions for improved stability and enhanced efficacy against depression

On average, depression affects 7.7% of the population aged 15 and older. One of the types of medicinal plants used to treat depression is saffron, which is uplifting and relieves sadness. Crocin as a bioactive compound is effective against depression, but it is sensitive to temperature, pH, and oxygen, and its efficiency decreases. Nanoencapsulation of crocin using double-layer emulsions is a method to increase the stability of this compound. Surfactant ratio (50% to 200%), stirrer speed (500 and 1000 rpm), and stirring time (45, 90, and 135 min) were used as variables of primary emulsion production. The optimum ratio of surfactant to aqueous phase was 100%, and in all microemulsions, viscosity increased with increasing surfactant ratio. A high-pressure homogenization method was used to make the secondary emulsion (double-layer emulsions), and soy protein concentrate (SPC), Gum Arabic (GA), and Pectin (P) at two levels of 5 and 10% were used to increase the stability. All treatments evaluated using Duncan's test at a significance level of 5%. Double-layer emulsions stabilized with pectin showed the highest viscosity and the lowest release of crocin in simulated stomach and intestine conditions. The use of the cellular automata model to investigate the release of crocin showed that this model could simulate the effects of crocin concentration, polymer concentration, and the droplet size of double-layer emulsions with 93-99% confidence to predict the release in double-layer emulsions. Then the double-layer emulsions added to the chocolate, and the chocolate containing the double-layer emulsions compared with the control sample in terms of sensory properties and had a higher score than the control sample.

Valorization of polyphenolic compounds from food industry by-products for application in polysaccharide-based nanoparticles

In the last decades, evidence has indicated the beneficial properties of dietary polyphenols. In vitro and in vivo studies support that the regular intake of these compounds may be a strategy to reduce the risks of some chronic non-communicable diseases. Despite their beneficial properties, they are poorly bioavailable compounds. Thus, the main objective of this review is to explore how nanotechnology improves human health while reducing environmental impacts with the sustainable use of vegetable residues, from extraction to the development of functional foods and supplements. This extensive literature review discusses different studies based on the application of nanotechnology to stabilize polyphenolic compounds and maintain their physical-chemical stability. Food industries commonly generate a significant amount of solid waste. Exploring the bioactive compounds of solid waste has been considered a sustainable strategy in line with emerging global sustainability needs. Nanotechnology can be an efficient tool to overcome the challenge of molecular instability, especially using polysaccharides such as pectin as assembling material. Complex polysaccharides are biomaterials that can be extracted from citrus and apple peels (from the juice industries) and constitute promising wall material stabilizing chemically sensitive compounds. Pectin is an excellent biomaterial to form nanostructures, as it has low toxicity, is biocompatible, and is resistant to human enzymes. The potential extraction of polyphenols and polysaccharides from residues and their inclusion in food supplements may be a possible application to reduce environmental impacts and constitutes an approach for effectively including bioactive compounds in the human diet. Extracting polyphenolics from industrial waste and using nanotechnology may be feasible to add value to food by-products, reduce impacts on nature and preserve the properties of these compounds.

Encapsulation Properties of Mentha piperita Leaf Extracts Prepared Using an Ultrasound-Assisted Double Emulsion Method

Double emulsions (W1/O/W2) have long been used in the food and pharmaceutical industries to encapsulate hydrophobic and hydrophilic drugs and bioactive compounds. This study investigated the effect of different types of emulsifiers (plant- vs. animal-based proteins) on the encapsulation properties of Mentha piperita leaf extract (MLE) prepared using the double emulsion method. Using response surface methodology, the effect of ultrasound-assisted extraction conditions (amplitude 20-50%; time 10-30 min; ethanol concentration 70-90%) on the total phenolic content (TPC) and antioxidant activity (percent inhibition) of the MLE was studied. MLE under optimized conditions (ethanol concentration 76%; amplitude 39%; time 30 min) had a TPC of 62.83 mg GA equivalents/g and an antioxidant activity of 23.49%. The optimized MLE was encapsulated using soy, pea, and whey protein isolates in two emulsifying conditions: 4065× g/min and 4065× g/30 s. The droplet size, optical images, rheology, and encapsulation efficiency (EE%) of the different encapsulated MLEs were compared. The W1/O/W2 produced at 4065× g/min exhibited a smaller droplet size and higher EE% and viscosity than that prepared at 4065× g/30 s. The higher EE% of soy and pea protein isolates indicated their potential as an effective alternative for bioactive compound encapsulation.

Controlled Drug Release from Nanoengineered Polysaccharides

Polysaccharides are naturally occurring complex molecules with exceptional physicochemical properties and bioactivities. They originate from plant, animal, and microbial-based resources and processes and can be chemically modified. The biocompatibility and biodegradability of polysaccharides enable their increased use in nanoscale synthesis and engineering for drug encapsulation and release. This review focuses on sustained drug release studies from nanoscale polysaccharides in the fields of nanotechnology and biomedical sciences. Particular emphasis is placed on drug release kinetics and relevant mathematical models. An effective release model can be used to envision the behavior of specific nanoscale polysaccharide matrices and reduce impending experimental trial and error, saving time and resources. A robust model can also assist in translating from in vitro to in vivo experiments. The main aim of this review is to demonstrate that any study that establishes sustained release from nanoscale polysaccharide matrices should be accompanied by a detailed analysis of drug release kinetics by modeling since sustained release from polysaccharides not only involves diffusion and degradation but also surface erosion, complicated swelling dynamics, crosslinking, and drug-polymer interactions. As such, in the first part, we discuss the classification and role of polysaccharides in various applications and later elaborate on the specific pharmaceutical processes of polysaccharides in ionic gelling, stabilization, cross-linking, grafting, and encapsulation of drugs. We also document several drug release models applied to nanoscale hydrogels, nanofibers, and nanoparticles of polysaccharides and conclude that, at times, more than one model can accurately describe the sustained release profiles, indicating the existence of release mechanisms running in parallel. Finally, we conclude with the future opportunities and advanced applications of nanoengineered polysaccharides and their theranostic aptitudes for future clinical applications.

Fabrication of anthocyanin–rich W1/O/W2 emulsion gels based on pectin–GDL complexes: 3D printing performance

The stability of anthocyanin-rich W₁/O/W₂ double emulsions prepared with Nicandra physalodes (Linn.) Gaertn. Seeds pectin was investigated, including droplet sizes, ζ-potential, viscosity, color, microstructures and encapsulation efficiency. Furthermore, the gelation behavior, rheological behavior, texture behavior and three-dimensional (3D) printing effects of the W₁/O/W₂ emulsion gels induced with Glucono-delta-lactone (GDL) were studied. The L*, b*, ΔE, droplet sizes and ζ-potential of the emulsions were gradually increased, while other indicators were gradually decreased during 28 days of storage under 4 ℃. The storage stability of sample under storage at 4 ℃ was higher than 25 ℃. The G' of W₁/O/W₂ emulsion gels gradually boosted with increased GDL addition, and reached the highest after the addition of 1.6 % GDL. In creep-recovery sweep, the minimum strain of 1.68 % and the highest recovery rate of 86 % were also found for the emulsion gels with 1.6 % GDL. Accordingly, the models "KUST", hearts, flowers printed by emulsion gels after 60 min addition of 1.6 % GDL had the best printing effects. The W₁/O/W₂ emulsion gels based on pectin-GDL complexes exhibited good performance in protecting anthocyanins and suggested as a potential ink for food 3D printing.

Fabrication of grape seed proanthocyanidin-loaded W/O/W emulsion gels stabilized by polyglycerol polyricinoleate and whey protein isolate with konjac glucomannan: Structure, stability, and in vitro digestion

In this work, the effects of konjac glucomannan (KGM) concentrations on microstructure, gel properties, stability and digestibility of water-in-oil-in-water emulsion gels stabilized by polyglycerol polyricinoleate and whey protein isolate were investigated. Visual appearance indicated that a non-layered double emulsion gel was formed when KGM increased to 0.75%. Emulsion gels with 1.5% KGM showed the highest encapsulation, freeze-thaw and photochemical stability due to the formation of the smallest droplets, which were supported by microscopic observations. Moreover, the addition of KGM improved water holding capacity, rheological and texture properties of emulsion gels. Particularly, at 1.5% or 1.75% KGM, color and potential of hydrogen showed the most stable level after 14 days of storage. During in vitro digestion, KGM delayed the hydrolysis of protein and oil droplets, and then improved the bioavailability of grape seed proanthocyanidin. These results promoted the application of KGM in emulsion gels and the encapsulation of nutraceuticals.

Biopolymer- and Lipid-Based Carriers for the Delivery of Plant-Based Ingredients

Natural ingredients are gaining increasing attention from manufacturers following consumers’ concerns about the excessive use of synthetic ingredients. However, the use of natural extracts or molecules to achieve desirable qualities throughout the shelf life of foodstuff and, upon consumption, in the relevant biological environment is severely limited by their poor performance, especially with respect to solubility, stability against environmental conditions during product manufacturing, storage, and bioavailability upon consumption. Nanoencapsulation can be seen as an attractive approach with which to overcome these challenges. Among the different nanoencapsulation systems, lipids and biopolymer-based nanocarriers have emerged as the most effective ones because of their intrinsic low toxicity following their formulation with biocompatible and biodegradable materials. The present review aims to provide a survey of the recent advances in nanoscale carriers, formulated with biopolymers or lipids, for the encapsulation of natural compounds and plant extracts.

Pectin-based nanoencapsulation strategy to improve the bioavailability of bioactive compounds

Pectin is one of the polysaccharides to be used as a coating nanomaterial. The characteristics of pectin are suitable to form nanostructures for protection, increased absorption, and bioavailability of different active compounds. This review aims to point out the structural features of pectins and their use as nanocarriers. It also indicates the principal methodologies for the elaboration and application of foods. The research carried out shows that pectin is easily extracted from natural sources, biodegradable, biocompatible, and non-toxic. The mechanical resistance and stability in different pH ranges and the action of digestive enzymes allow the nanostructures to pass intact through the gastrointestinal system and be effectively absorbed. Pectin can bind to macromolecules, especially proteins, to form stable nanostructures, which can be formed by different methods; polyelectrolyte complexes are the most frequent ones. The pectin-derived nanoparticles could be added to foods and dietary supplements, demonstrating a promising nanocarrier with a broad technological application.

Encapsulation of Orange Peel Oil in Biopolymeric Nanocomposites to Control Its Release under Different Conditions

Orange peel oil (OPO) is one of the most common flavorings used in the food industry, but it is volatile under environmental conditions (the presence of light, oxygen, humidity, and high temperatures). Encapsulation by biopolymer nanocomposites is a suitable and novel strategy to improve the bioavailability and stability of OPO and its controlled release. In this study, we investigated the release profile of OPO from freeze-dried optimized nanocomposite powders as a function of pH (3, 7, 11) and temperature (30, 60, and 90 °C), and within a simulated salivary system. Finally, its release kinetics modelling was performed using experimental models. The encapsulation efficiency of OPO within the powders, along with the morphology and size of the particles, were also evaluated by an atomic force microscopy (AFM) analysis. The results showed that the encapsulation efficiency was in the range of 70-88%, and the nanoscale size of the particles was confirmed by AFM. The release profile showed that the lowest and the highest release rates were observed at the temperatures of 30 and 90 °C and in the pH values of 3 and 11, respectively, for all three samples. The Higuchi model provided the best model fitting of the experimental data for the OPO release of all the samples. In general, the OPO encapsulates prepared in this study showed promising characteristics for food flavoring applications. These results suggest that the encapsulation of OPO may be useful for controlling its flavor release under different conditions and during cooking.

Fabrication and characterization of gelatin-EGCG-pectin ternary complex: formation mechanism, emulsion stability, and structure

BACKGROUND

Protein-polyphenol-polysaccharide ternary complex particles have better emulsion interfacial stability compared to protein-polysaccharide binary complexes. However, knowledge is scarce when it comes to the fabrication of protein-polyphenol-polysaccharide ternary complexes as interfacial stabilizers and the interactions between the three substances. In the present work, ternary complexes were prepared using gelatin, high methoxyl pectin, and epigallocatechin gallate (EGCG) as raw materials. The effect of different influencing factors on the formation process of ternary complexes was investigated by varying different parameters. physicochemical stability, emulsifying properties, and structural characteristics were analyzed.

RESULTS

The ternary complex had a smaller particle size (275 nm) and polydispersity index (0.112) when the mass concentration ratio of gelatin to high methoxyl pectin was 9:1, addition of EGCG was 0.05%, pH value was 3.0, and ionic strength was 10 mmol L^-1 . Meanwhile, the complex had the highest emulsifying stability index (691.75 min) and emulsifying activity index (22.96 m²  g^-1 ). Scanning electron microscopical observation demonstrated that the addition of EGCG promoted the dispersion of ternary complex more uniformly, and effectively reduced the agglomeration phenomenon. The discrepancy in fluorescence intensity suggested that interactions between EGCG and gelatin occurred, which altered the protein spatial conformation of gelatin. Fourier transform infrared spectroscopic analysis elucidated that hydrogen bond interaction was the primary non-covalent interaction between EGCG and gelatin-high methoxyl pectin binary complex.

CONCLUSION

The aforementioned results purposed to provide some theoretical reference and basis for the rational design of stable protein-polyphenol-polysaccharide ternary complexes. © 2022 Society of Chemical Industry.

Encapsulation of Vitamin B12 by Complex Coacervation of Whey Protein Concentrate-Pectin; Optimization and Characterization

Vitamin B12 (VB12) is one of the essential vitamins for the body, which is sensitive to light, heat, oxidizing agents, and acidic and alkaline substances. Therefore, the encapsulation of VB12 can be one of the ways to protect it against processing and environmental conditions in food. In this work, the influence of pectin concentration (0.5−1% w/v), whey protein concentrate (WPC) level (4−8% w/v) and pH (3−9) on some properties of VB12-loaded pectin−WPC complex carriers was investigated by response surface methodology (RSM). The findings showed that under optimum conditions (1:6.47, pectin:WPC and pH = 6.6), the encapsulation efficiency (EE), stability, viscosity, particle size and solubility of complex carriers were 80.71%, 85.38%, 39.58 mPa·s, 7.07 µm and 65.86%, respectively. Additionally, the formation of complex coacervate was confirmed by Fourier-transform infrared (FTIR) spectroscopy and atomic force microscopy (AFM). In addition, it was revealed that the most important factor in VB12 encapsulation was pH; at a pH < isoelectric point of WPC (pH = 3), in comparison with higher pH values (6 and 9), a stronger complex was formed between pectin and WPC, which led to an increase in EE, lightness parameter, particle size and water activity, as well as a decrease in the zeta-potential and porosity of complex carriers.

Enhancement of the Stability of Encapsulated Pomegranate (Punica granatum L.) Peel Extract by Double Emulsion with Carboxymethyl Cellulose

Pomegranate peel enriched with high value of bioactive phenolics with valuable health benefits. However, after extraction of the phenolic compounds, diverse factors can affect their stability. Therefore, we, herein, aimed to prepare W1/O/W2 double nanoemulsions loaded with phenolic-rich extract from pomegranate peel in the W1 phase. Double emulsions were fabricate during a two-step emulsification technique. Furthermore, the influence of sodium carboxymethyl cellulose (CMC) in the outer aqueous phase was also investigated. We found that W1/O/W2 emulsions containing phenolic-rich extract showed good physical stability, especially in the particle size, polydispersity index, zeta potential, and creaming index. Intriguingly, high encapsulation rates of pomegranate polyphenols >95% were achieved; however, emulsion with CMC had the best encapsulation stability during storage. Thus, our study provides helpful information about the double nanoemulsions delivery system for polyphenols generated from pomegranate peel, which may lead to the development of innovative polyphenol-enriched functional foods.

Phenolic profile and antioxidant activity of free/bound phenolic compounds of sesame and properties of encapsulated nanoparticles in different wall materials

This study aimed to evaluate the antioxidant activity of free and bound flavonoid or phenolic compounds extracted from the sesame seed (Oltan and Yekta varieties) as natural antioxidants and to demonstrate the properties of nanoparticles. The total phenolic content (TPC) of Oltan was higher (864.70 mg GAE/100 g seed) than that of Yekta (629.23 mg GAE/100 g seed). Oltan took up higher amounts of free (516.86 mg GAE/100 g seed) and bound (347.83 mg GAE/100 g seed) phenolics than Yekta. Also, the Yekta variety exhibited lower amounts of free (45.89 mg CE/100 g seed) and bound flavonoids (21.51 mg CE/100 g seed) and the total flavonoid content (TFC) (67.40 mg CE/100 g seed). Chlorogenic acid was the major phenolic compound present in the sesame seed. In both the DPPH and ferric reducing antioxidant power (FRAP) assays, the highest antioxidant activity was observed in the Oltan variety. Free phenolics showed the highest antioxidant activity, followed by bound phenolics, free and bound flavonoids. Therefore, free phenolics of the Oltan variety were encapsulated in Portulaca oleracea and Trigonella foenum-graecum seed gums. All nanoparticles showed nanometric size from 236.1 to 680.7 nm, negative zeta potential from -35.4 to -18.3 mV, high encapsulation efficiency from 61.35% to 74.49%, and desirable polydispersity index (PDI) between 0.315 and 0.332. Higher release of phenolics and sedimentation rate were observed in phenolic compounds encapsulated in Khorfeh and Shanbalileh, respectively. The gradual release of phenolic compounds, as well as sedimentation rate of composite coating during 40 days of storage, demonstrated that nanoencapsulated phenolics of sesame within the composite gum coating could be used as natural antioxidants in food systems.

Olive Pomace and Pâté Olive Cake as Suitable Ingredients for Food and Feed

Olive oil extraction generates several by-products that represent an environmental issue, mainly for Mediterranean countries where olive oil is mostly produced. These by-products represent an ecological issue for their phenolic components, such as oleuropein, hydroxytyrosol, and tyrosol. However, olive oil by-products can be treated and properly exploited in different fields for their health-promoting properties, and they represent great potential for the food and beverage, cosmetic, and pharmaceutical industries. Furthermore, recovery and treatment processes can contribute to efficient waste management, which can enhance the sustainability of the olive oil industry, and in turn, lead to relevant economic benefits. The solid waste, i.e., olive pomace, could be considered to be a suitable matrix or primary resource of molecules with high added value due to their high phenolic content. Olive pomace, at different moisture contents, is the main by-product obtained from two- or three-phase extraction systems. A commonly used centrifugal extraction system, i.e., a multiphase decanter (DMF), does not require the addition of water and can generate a new by-product called pâté or olive pomace cake, consisting of moist pulp that is rich in phenols, in particular, secoiridoids, without any trace of kernel. Although several reviews have been published on olive wastes, only a few reviews have specifically focused on the solid by-products. Therefore, the aim of the present review is to provide a comprehensive overview on the current valorization of the main solid olive oil by-products, in particular, olive pomace or pâté olive cake, highlighting their use in different fields, including human nutrition.

Stability and release mechanisms of double emulsions loaded with bioactive compounds; a critical review

Double emulsions (DEs), known as emulsions of emulsions, are dispersion systems in which the droplets of one dispersed liquid are further dispersed in another liquid, producing double-layered liquid droplets. These systems are widely used in the food and pharmaceutical industries due to their ability to co-encapsulate both hydrophilic and hydrophobic bioactive compounds. However, they are sensitive and unstable and their controlled release is challenging. In this study, first, the stability of DEs and their release mechanisms are reviewed. Then, the factors affecting their stability, and the release of bioactive compounds are studied. Finally, modeling of the release in DEs is discussed. This information can be useful to optimize the formulation of DEs in order to utilize them in different industries.

The complex of whey protein and pectin: Interactions, functional properties and applications in food colloidal systems - A review

This review describes the mechanism of non-covalent/covalent interaction of whey protein-pectin (WPP) complexes, including electrostatic interaction, steric hindrance, cross-linking and Maillard reaction. The interaction between whey protein and pectin determines the form of the complex in the system, i.e. co-dissolution, precipitation, separation, complex coacervation and compounding. The interaction of WPP is affected by environmental conditions and its own properties, including several factors such as pH, polymer concentration and ratio, temperature, and ionic strength. In addition, the functional properties of WPP complexes are discussed through illustrative examples. The complexes with good emulsification, heat stability, gelling properties and biological activity have promising application prospects. WPP complexes have been widely studied for application in food colloidal systems, including protein beverages, delivery systems for bioactive substances, fat substitutes and food preservation films/coatings. The understanding of the interaction and functional properties of WPP complexes provides theoretical support for the improvement and design of new food colloidal systems.

Influence of diverse natural biopolymers on the physicochemical characteristics of borage seed oil-peppermint oil loaded W/O/W nanoemulsions entrapped with lycopene

Borage seed oil (BSO), peppermint oil (PO) and lycopene (LC) have accomplished a lot of interest due to their therapeutic benefits in the food and pharmaceutical sectors. However, their employment in functional food products and dietary supplements is still precluded by their high susceptibility to oxidation. Thus, the encapsulation can be applied as a promising strategy to overcome these limits. In the present study, doubly layered water/oil/water (W/O/W) nanoemulsions were equipped using purity gum ultra (PGU), soy protein isolate (SPI), pectin (PC), whey protein isolate (WPI) and WPI-PC and SPI-PC complexes, and their physico-chemical properties were investigated. Our aim was to investigate the influence of natural biopolymers as stabilizers on the physicochemical properties of nanoemulsified BSO, PO and lycopene thru W/O/W emulsions. The droplet size of the fabricated emulsions coated with PGU, WPI, SPI, PC, WPI-PC, and SPI-PC was 156.2, 265.9, 254.7, 168.5, 559.5 and 656.1 nm, correspondingly. The encapsulation efficiency of the entrapped bioactives for powders embedded by PGU, WPI, SPI, PC, WPI-PC, and SPI-PC was 95.21%, 94.67%, 97.24%, 92.19%, 90.07% and 92.34%, respectively. In addition, peroxide and p-anisidine values were used to measure the antioxidant potential of the entrapped bioactive compounds during storage, which was compared to synthetic antioxidant and bare natural antioxidant. The collected findings revealed that oxidation occurred in oils encompassing entrapped bioactive compounds, but at a lower extent than for non-encapsulated bioactives. In summary, the findings obtained from current research prove that the nanoencapsulation of BSO surrounded by innermost aqueous stage of W/O/W improved its stability as well as allowed a controlled release of the entrapped bioactives. Thus, the obtained BSO-PO-based systems could be successfully used for further fortification of food-stuffs.

Olive Mill Wastewater as Renewable Raw Materials to Generate High Added-Value Ingredients for Agro-Food Industries

Olive oil production represents an agro-industrial activity of vital economic importance for many Mediterranean countries. However, it is associated with the generation of a huge amount of by-products, both in solid and liquid forms, mainly constituted by olive mill wastewater, olive pomace, wood, leaves, and stones. Although for many years olive by-products have only been considered as a relevant environmental issue, in the last decades, numerous studies have deeply described their antioxidant, anti-inflammatory, immunomodulatory, analgesic, antimicrobial, antihypertensive, anticancer, anti-hyperglycemic activities. Therefore, the increasing interest in natural bioactive compounds represents a new challenge for olive mills. Studies have focused on optimizing methods to extract phenols from olive oil by-products for pharmaceutical or cosmetic applications and attempts have been made to describe microorganisms and metabolic activity involved in the treatment of such complex and variable by-products. However, few studies have investigated olive oil by-products in order to produce added-value ingredients and/or preservatives for food industries. This review provides an overview of the prospective of liquid olive oil by-products as a source of high nutritional value compounds to produce new functional additives or ingredients and to explore potential and future research opportunities.

Fortifying of probiotic yogurt with free and microencapsulated extract of Tragopogon Collinus and its effect on the viability of Lactobacillus casei and Lactobacillus plantarum

In this study, the effect of free and microencapsulation of Tragopogon Collins extract (TPE) on the properties of probiotic yogurt was investigated. For this purpose, first, TPE was extracted by ultrasound method. The amounts of phenolic and flavonoid compounds in TPE were 890.04 mg/g gallic acid and 512.76 mg/g extract (respectively), and it had high antioxidant and antimicrobial properties. Then, the extract was encapsulated by maltodextrin-whey protein concentrate. The results related to the particle size, zeta-potential, and microencapsulation efficiency of the TPE microencapsulation were 93.87 nm, 18.99 MV, and 64.35% respectively. In order to investigate the effect of nano- and free TPE on the properties of yogurt during a 15-day storage period of 5 treatments including control, nano- and free TPE at 750 and 1,000 ppm were provided and the physicochemical properties, probiotic bacteria viability, and sensory properties were investigated. The results showed that adding TPE to yogurt affects the physicochemical properties, probiotic bacterial viability, and sensory properties were investigated. The results showed that adding TPE to yogurt affects the physicochemical properties. TPE samples had lower pH, less syneresis, and more acidity, viscosity, and antioxidant properties compared to the control sample (p < .05). Furthermore, in these samples, the viability of probiotic bacteria during storage was higher than the control treatment and the sensory properties were acceptable. In most cases, better results were observed in nano-TPE treatment. Therefore, by industrial production of probiotic yogurt containing nano-TPE as a functional food, a new choice will be provided for consumers of dairy products that would have more desirable nutritional value and sensory properties.

Innovative Delivery Systems Loaded with Plant Bioactive Ingredients: Formulation Approaches and Applications

Plants constitute a rich source of diverse classes of valuable phytochemicals (e.g., phenolic acids, flavonoids, carotenoids, alkaloids) with proven biological activity (e.g., antioxidant, anti-inflammatory, antimicrobial, etc.). However, factors such as low stability, poor solubility and bioavailability limit their food, cosmetics and pharmaceutical applications. In this regard, a wide range of delivery systems have been developed to increase the stability of plant-derived bioactive compounds upon processing, storage or under gastrointestinal digestion conditions, to enhance their solubility, to mask undesirable flavors as well as to efficiently deliver them to the target tissues where they can exert their biological activity and promote human health. In the present review, the latest advances regarding the design of innovative delivery systems for pure plant bioactive compounds, extracts or essential oils, in order to overcome the above-mentioned challenges, are presented. Moreover, a broad spectrum of applications along with future trends are critically discussed.

The Use of Salvia macrosiphon and Lepidium sativum Linn. Seed Gums in Nanoencapsulation Processes: Improving Antioxidant Activity of Potato Skin Extract

In the present study, the effect of Salvia macrosiphon Seed Gum (SMSG) and Lepidium sativum Linn. Seed Gum (LSSG) as a coating agent on the properties of nanoencapsulated potato skin extract was studied. Moreover, the antioxidant effect of nanoencapsulated extract at a concentration of 1000 ppm incorporated into soybean oil was evaluated. The Z-average size of the emulsions stabilized by SMSG; LSSG; and a complex (1 : 1) of SMSG and LSSG (CSL) was estimated as 160.2, 144.3, and 115.2 nm. The encapsulation efficiency of phenolic extracts in the powders formed by SMSG, LSSG, and CSL was 82.39, 81.67, and 93.6% which declined to 45.28, 48.22, and 62.67% after storage for 40 days at 30°C. The results indicated that the use of coating agents for encapsulation enhanced their antioxidant effect and compared with TBHQ and free extract that nanoencapsulated extract by CSL had the highest antioxidant activity followed by LSSG nanoencapsulated extract and SMSG nanoencapsulated extract.

Comparison of binary cress seed mucilage (CSM)/β-lactoglobulin (BLG) and ternary CSG-BLG-Ca (calcium) complexes as emulsifiers: Interfacial behavior and freeze-thawing stability

Protein-polysaccharide complexes often exhibit amended techno-functional characteristics when compared to their individual participant biomolecules. In this study, a complex coacervation of cress seed mucilage (CSM)/β-lactoglobulin (Blg) was used for stabilizing oil-in-water emulsions; they were characterized in terms of physical properties, droplet-size distribution and microstructure. Also, a comprehensive study was carried out on interfacial rheological responses and on the corresponding emulsion stability of different complexes. Freeze-thaw stability of the produced emulsions which had from mixtures of CSM-Blg was also evaluated. More than the size of droplets, interfacial rheological characteristics were associated with the properties of the adsorbed layers and with the stability of emulsions in storage. Using the CSM-Blg-Ca ultimately resulted in emulsions that proved stable against creaming, with no sign of phase separation over 3 weeks. These results show protein-polysaccharide complexes as appropriate emulsifiers that can make emulsion-based products resistant to unwanted changes caused by freeze-thawing.

An Overview of Nanoformulated Nutraceuticals and their Therapeutic Approaches

Background:

Economic development and vast changes in food habits have accelerated the consumption of junk foods, which are the leading causes of several disorders that turn the majority of the people to use various herbal formulations or drugs for preventing various lifestyle diseases. Nutraceuticals are the borderline apparatus between nutrients and drugs that provide supplementation of the particular nutrient with a favorable health effect.

Objective:

Various nutraceutical compounds like vitamins, spices, polyphenols, prebiotics, and probiotics in the form of powders, tablets, and capsules are currently marketed globally. Among them, previous literature have reported that polyphenols are the most promising compounds that have been proven to treat various chronic diseases like cancer, hypertension, diabetes mellitus (DM), osteoporosis, osteoarthritis, dyslipidemia, multiple sclerosis, congenital anomalies, Alzheimer’s disease, etc. It is warranted to discuss the benefits of nanoformulations of nutraceuticals.

Methods:

We have searched PubMed using the keywords nutraceuticals, nanoformulations, therapeutic approaches, bionanotechnology, and therapeutics. The relevant papers and classical papers in this field were selected to write this review.

Results and Discussion:

The different classifications of nutraceuticals were described in this review. The comparison between the different categories of nutraceuticals with their nanoformulated forms was made, explaining the benefits of nanoformulations regarding stability, bioavailability, enhanced anti-oxidant properties, etc. A glimpse of the drawbacks of nanoformulations was also included.

Conclusion:

The current review highlights an overview of various nanoformulated nutraceuticals and their approach towards the treatment of multiple diseases.

Encapsulation of rose essential oil using whey protein concentrate-pectin nanocomplexes: Optimization of the effective parameters

The aim of this study was to optimize the preparation of whey protein concentrate (WPC)-pectin nanocomplexes as a carrier for rose essential oil (REO) via response surface methodology (RSM); with initial concentrations of WPC (4-8%) and pectin (0.5-1%) at different pH values ​​(3-9). The highest encapsulation efficiency of REO was 96.97% for 4.0:0.5 ratio of WPC:pectin at pH = 3. The highest viscosity was obtained at 4:1 ratio of WPC:pectin and pH = 3, and the highest stability (96.5%) was related to 4:1 ratio of WPC:pectin at pH = 9; the lowest stability (81%) was observed at 4:1 ratio of WPC:pectin at pH = 3. Finally, the highest solubility occurred at pH = 9 while the lowest solubility was seen in the treatments prepared at pH = 3 due to the creation of a strong WPC-pectin coacervate complex.

Nanoencapsulation of Promising Bioactive Compounds to Improve Their Absorption, Stability, Functionality and the Appearance of the Final Food Products

The design of functional foods has grown recently as an answer to rising consumers' concerns and demands for natural, nutritional and healthy food products. Nanoencapsulation is a technique based on enclosing a bioactive compound (BAC) in liquid, solid or gaseous states within a matrix or inert material for preserving the coated substance (food or flavor molecules/ingredients). Nanoencapsulation can improve stability of BACs, improving the regulation of their release at physiologically active sites. Regarding materials for food and nutraceutical applications, the most used are carbohydrate-, protein- or lipid-based alternatives such as chitosan, peptide-chitosan and β-lactoglobulin nanoparticles (NPs) or emulsion biopolymer complexes. On the other hand, the main BACs used in foods for health promoting, including antioxidants, antimicrobials, vitamins, probiotics and prebiotics and others (minerals, enzymes and flavoring compounds). Nanotechnology can also play notable role in the development of programmable food, an original futuristic concept promising the consumers to obtain high quality food of desired nutritive and sensory characteristics.

Polysaccharides-based bio-nanostructures and their potential food applications

Polysaccharides are omnipresent biomolecules that hold great potential as promising biomaterials for a myriad of applications in various biotechnological and industrial sectors. The presence of diverse functional groups renders them tailorable functionalities for preparing a multitude of novel bio-nanostructures. Further, they are biocompatible and biodegradable, hence, considered as environmentally friendly biopolymers. Application of nanotechnology in food science has shown many advantages in improving food quality and enhancing its shelf life. Recently, considerable efforts have been made to develop polysaccharide-based nanostructures for possible food applications. Therefore, it is of immense importance to explore literature on polysaccharide-based nanostructures delineating their food application potentialities. Herein, we reviewed the developments in polysaccharide-based bio-nanostructures and highlighted their potential applications in food preservation and bioactive "smart" food packaging. We categorized these bio-nanostructures into polysaccharide-based nanoparticles, nanocapsules, nanocomposites, dendrimeric nanostructures, and metallo-polysaccharide hybrids. This review demonstrates that the polysaccharides are emerging biopolymers, gaining much attention as robust biomaterials with excellent tuneable properties.

Preparation, characterization and release behavior of chitosan-coated nanoliposomes (chitosomes) containing olive leaf extract optimized by response surface methodology

This study was dedicated to the optimization and preparation of chitosan-coated liposomes (chitosomes) as promising nanocarriers for retention of olive leaf extract optimized by Response surface methodology (RSM) based on central composite design. Accordingly, the best sample was chosen for further tests with the encapsulation efficiency, stability and electrical conductivity of 94%, 98% and 9.545 mS respectively. The average size of the optimal chitosome and nanoliposome were lower than 100 nm and the zeta potential was altered from a negative charge to positive after addition coating process with chitosan. Moreover, the differential scanning calorimetry of blank and loaded chitosome revealed the increase of fluidity and lower temperature of phase transition in loaded chitosome compared to blank one. FTIR spectra demonstrated that electrostatic interactions and hydrogen bonds occur between phospholipid polar groups, chitosan amine moieties and major olive leaf extract polyphenols including oleuropein and hydroxy tyrosol. Furthermore, the optimal loaded chitosome had the highest stability during 25 days at the temperature of 4 °C. Finally, the in vitro release tests were best fitted with Peppas-Sahlin and Kopcha models in food simulants and gastrointestinal simulated juice respectively revealing erosion-based release model.

Supplementary Information

The online version contains supplementary material available at (10.1007/s13197-021-04972-2).

Nano-technological approaches for plant and marine-based polysaccharides for nano-encapsulations and their applications in food industry

Novel food preservation methods, along with preservatives have been employed to prevent food products from spoilage. There is an increasing demand to substitute synthetic preservatives with natural bioactive compounds since they are safe and environmentally friendly. Bioactive compounds with functional and therapeutic properties are found in foods and have also beneficial physiological and immunological health effects. However, there are some issues associated with bioactive compounds, such as low stability, solubility, and permeability. Encapsulation techniques, especially nano-encapsulation, are a promising technique to overcome these restrictions. A range of the plants' constituents can be converted into bio-nanomaterials. Major plant constituents are polysaccharides which have good biocompatibility properties and therapeutic activities, such as antioxidant, antiviral, anti-inflammatory, anti-allergic, and anti-tumor. Among plant and marine-based polysaccharides, cellulose, starch, alginates, chitosan, and carrageenans have been used as carrier materials to preserve core material. Moreover, many studies indicated that favorable sources such as plant and marine based polysaccharides are emerging. This chapter will cover plant and marine-based polysaccharides for nano-encapsulation and their application in the food industry.

The influence of nanodelivery systems on the antioxidant activity of natural bioactive compounds

Bioactive compounds may lose their antioxidant activity (e.g., phenolic compounds) at elevated temperatures, enhanced oxidative conditions and severe light exposures so they should be protected by various strategies such as nano/microencapsulation methods. Encapsulation technology has been employed as a proper method for using antioxidant ingredients and to provide easy dispersibility of antioxidants in all matrices including food and pharmaceutical products. It can improve the food fortification processes, release of antioxidant ingredients, and extending the shelf-life and bioavailability of them when ingested in the intestine. In this study, our main goal is to have an overview of the influence of nanoencapsulation on the bioactivity and bioavailability, and cellular activities of antioxidant ingredients in different delivery systems. Also, the effect of encapsulation process conditions, storage conditions, carrier wall materials, and release profile on the antioxidant activity of different natural bioactives are explained. Finally, analytical techniques for measuring antioxidant activity of nanoencapsulated ingredients will be covered.