Preparation and characterization of carboxymethylated carrageenan modified with collagen peptides

Exploring carrageenan: From seaweed to biomedicine-A comprehensive review

Biomaterials are pivotal in the realms of tissue engineering, regenerative medicine, and drug delivery and serve as fundamental building blocks. Within this dynamic landscape, polymeric biomaterials emerge as the frontrunners, offering unparalleled versatility across physical, chemical, and biological domains. Natural polymers, in particular, captivate attention for their inherent bioactivity. Among these, carrageenan (CRG), extracted from red seaweeds, stands out as a naturally occurring polysaccharide with immense potential in various biomedical applications. CRG boasts a unique array of properties, encompassing antiviral, antibacterial, immunomodulatory, antihyperlipidemic, antioxidant, and antitumor attributes, positioning it as an attractive choice for cutting-edge research in drug delivery, wound healing, and tissue regeneration. This comprehensive review encapsulates the multifaceted properties of CRG, shedding light on the chemical modifications that it undergoes. Additionally, it spotlights pioneering research that harnesses the potential of CRG to craft scaffolds and drug delivery systems, offering high efficacy in the realms of tissue repair and disease intervention. In essence, this review celebrates the remarkable versatility of CRG and its transformative role in advancing biomedical solutions.

Synthesis of biodegradable antimicrobial pH-sensitive silver nanocomposites reliant on chitosan and carrageenan derivatives for 5-fluorouracil drug delivery toward HCT116 cancer cells

The current research relies on a one-pot green biosynthesis of silver nanoparticles (SNPs) with various ratios of silver (Ag) in the existence of N, N, N-trimethyl chitosan chloride (TMC) and carboxymethyl kappa-carrageenan (CMKC), to investigate the effectiveness of the synthesized silver nanocomposites (SNCs) as pH sensitive biodegradable carrier for orally intestinal delivery of 5-fluorouracil (5-FU) drug. FTIR, XRD, TEM and FE-SEM/EDX methods were utilized to demonstrate the structure of the prepared polyelectrolyte complex PEC (TMC/CMKC) and SNCs (TMC/CMKC/Ag). The results showed that the 5-FU encapsulation effectiveness inside all of the prepared SNCs samples was improved by increasing the concentration of Ag, reaching 92.16 ± 0.57 % with 3 % Ag. In vitro release behavior of 5-FU loaded SNC 3 % (TMC/CMKC/Ag 3 %), displayed slow and sustained release reaching 96.3 ± 0.81 % up to 24 h into pH 7.4 medium. The successful release of 5-FU from the loaded SNC 3 % was confirmed through occurrence of strong cytotoxicity, with an IC₅₀ value of 31.15 μg/ml, and high % of apoptotic cells (30.66 %) within the treated HCT116 cells. Besides, SNC 3 % showed good biodegradability and antimicrobial properties against different bacterial strains. Overall, SNC 3 % can be suggested as an effective system for both controlled drug delivery and antibacterial action.

Carboxymethyl carrageenan immobilized on 3D-printed polycaprolactone scaffold for the adsorption of calcium phosphate/strontium phosphate adapted to bone regeneration

Three dimensional (3D) substrates based on natural and synthetic polymers enhance the osteogenic and mechanical properties of the bone tissue engineering scaffolds. Here, a novel bioactive composite scaffolds from polycaprolactone /kappa-carrageenan were developed for bone regeneration applications. 3D PCL scaffolds were fabricated by 3D printing method followed by coating with carboxymethyl kappa-carrageenan. This organic film was used to create calcium and strontium phosphate layers via a modified alternate soaking process in CaCl ₂ /SrCl ₂ and Na₂HPO₄ solutions in which calcium ions were replaced by strontium, with different amounts of strontium in the solutions. Various characterization techniques were executed to analyze the effects of strontium ion on the scaffold properties. The morphological results demonstrated the highly porous with interconnected pores and uniform pore sizes scaffolds. It was indicated that the highest crystallinity and compressive strength were obtained when 100% CaCl₂ was replaced by SrCl₂ in the solution (P-C-Sr). Incorporation of Sr onto the structure increased the degradation rate of the scaffolds. Mesenchymal stem cells (MSCs) culture on the scaffolds showed that Sr effectively improved attachment and viability of the MSCs and accelerated osteogenic differentiation as revealed by Alkaline phosphatase activity, calcium content and Real Time-Reverse transcription polymerase chain reaction assays.

Biocompatible Crosslinked Nanofibers of Poly(Vinyl Alcohol)/Carboxymethyl-Kappa-Carrageenan Produced by a Green Process

This study presents a new type of biocompatible nanofiber based on poly(vinyl alcohol) (PVA) and carboxymethyl-kappa-carrageenan (CMKC) blends, produced with no generation of hazardous waste. The nanofibers are produced by electrospinning using PVA:CMKC blends with ratios of 1:0, 1:0.25, 1:0.4, 1:0.5, and 1:0.75 (w/w PVA:CMKC) in aqueous solution, followed by thermal crosslinking. The diameter of the fibers is in the nanometer scale and below 300 nm. Fourier transform infrared spectroscopy shows the presence of the carboxyl and sulfate groups in all the fibers with CMKC. The nanofibers from water-soluble polymers are stabilized by thermal crosslinking. The incorporation of CMKC improves cytocompatibility, biodegradability, cell growth, and cell adhesion, compared to PVA nanofibers. Furthermore, the incorporation of CMKC modulates phenotype of human adipose-derived stem cells (ADSCs). PVA/CMKC nanofibers enhance ADSC response to osteogenic differentiation signals and are therefore good candidates for application in tissue engineering to support stem cells.

Carboxymethyl-kappa-carrageenan: A study of biocompatibility, antioxidant and antibacterial activities

Chemical modification of polysaccharides is an important route to enhance, develop or change polysaccharide properties. In this study, carboxymethylation of kappa-carrageenan (KC) with monochloroacetic acid was performed to achieve different degrees of substitution (DS) of carboxymethyl-kappa-carrageenan (CMKC). The degree of substitution ranged from 0.8 to 1.6 and was calculated from the ¹H NMR spectra. The chemical structure of the CMKCs was further characterized by FT-IR, and ¹³C NMR. FT-IR confirmed the carboxymethylation. Carboxymethylation increased viscosity of KC in water and decreased viscosity of KC in synthetic human sweat. Tests with human adipose derived stem cells showed higher viability and lower cytotoxicity for CMKCs when compared to KC. CMKCs showed no hemolytic activity to human red blood cells. CMKCs have increased antioxidant activity compared to KC. In antibacterial assays, CMKCs with DS of 0.8, 1.0 and 1.2 exhibited growth inhibition against Staphylococcus aureus, Bacillus cereus, Escherichia coli and Pseudomonas aeruginosa. CMKC with DS ranging from 1.0 to 1.2 are good candidate biomaterials for cell-contacting applications.

Algal polysaccharides: potential bioactive substances for cosmeceutical applications

The cosmetics industry is one of the most profitable in the world today. This multi-billion-dollar industry has a profound sociological impact worldwide. Its influence is global, with most individuals being concerned with conserving their physical appearance, beauty, and youth. The consumers' desire for novel, better, and safer products has stimulated the utilization of natural-product-based cosmeceutical formulations over synthetic chemicals. With remarkable advancements in marine bioresource technology, algal polysaccharides have gained much attention as bioactive ingredients in cosmeceuticals. Algae biosynthesize a variety of polysaccharides including fucoidans, alginates, carrageenans, galactans, agar, porphyran, glucans, and ulvans, all of which exhibit distinctive structural and functional properties. Many of these materials have been proven to possess skin-protective effects, including anti-wrinkle, lightening, moisturizing, UV protective, antioxidative, and anti-inflammatory activity. Moreover, they have a wide spectrum of physicochemical properties, such as the ability to form hydrogels, which extend their utilization as emulsifiers, stabilizers, and viscosity controlling ingredients in cosmeceuticals. Accordingly, algal hydrocolloids and their synthetic derivatives can also be applied in tissue engineering and cosmetic surgery. The challenge is to increase awareness about these polysaccharides and consequently generate value-added products. This review discusses the beneficial biological and physicochemical properties of algal polysaccharides, highlighting their potential in cosmeceutical applications.

Synthesis and in vitro antimicrobial and antioxidant activities of quaternary ammonium chitosan modified with nisin

Nisin had been grafted onto quaternary ammonium chitosan (QCS) through an enzyme-catalyzed reaction to enhance its limited antimicrobial activity. QCS was synthesized by incorporating N-(3-chloro-2-hydroxypropyl) trimethyl ammonium chloride (CHPTAC) onto chitosan's primary amine group. The modification had been confirmed by FT-IR and ¹H NMR spectroscopy. Degree of substitution (DS) of QCS-nisin could be controlled by adjusting the reaction conditions. The synthesized compounds were screened in vitro to evaluate their antimicrobial and antioxidant activities. The results suggested that QCS-nisin significantly suppressed the growth of both gram-positive bacteria and gram-negative bacteria; The antioxidant effects on 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical, hydroxyl radical and hydrogen peroxide (H₂O₂) proved to be enhanced with increasing DS and concentration. In addition, QCS-nisin showed excellent moisture absorption and retention properties; MTT assay exhibited that QCS-nisin revealed low cytotoxicity effects on cultured NIH-3T3 fibroblasts. These results suggest that QCS-nisin would appear to be a promising candidate for wound dressing application.

Effect of epichlorohydrin on the wet spinning of carrageenan fibers under optimal parameter conditions

Motivated by the extensive application of carrageenans, this work prepared carrageenan fibers via wet spinning. The optimum spinning parameters were explored by means of an orthogonal test. According to the results of tensile test, dope concentration, draw ratio, coagulation bath temperature, and coagulation bath concentration set to 9%, 1.2, 15°C and 5%, respectively, were the optimum spinning conditions. These parameters were then applied to fabricate fibers treated with epichlorohydrin in a stretch bath. The result of tensile testing demonstrated a positive improvement in the intensity, and SEM showed obvious necking phenomenon of the crosslinked carrageenan fibers. The structures and special groups were characterized with X-ray diffraction and FTIR, and the results indicated the regularity of the net structure and the increase in ether bond and methylene. In some, crosslinking reactions in optimum parameter conditions yield excellent fibers and thus present promising applications.