Electrospun fibers based on Arabic, karaya and kondagogu gums

Tyrosol-gold nanoparticle functionalized acacia gum-PVA nanofibers for mitigation of Candida biofilm

Increasing incidences of fungal infections and prevailing antifungal resistance in healthcare settings has given rise to an antifungal crisis on a global scale. The members of the genus Candida, owing to their ability to acquire sessile growth, are primarily associated with superficial to invasive fungal infections, including the implant-associated infections. The present study introduces a novel approach to combat the sessile/biofilm growth of Candida by fabricating nanofibers using a nanoencapsulation approach. This technique involves the synthesis of tyrosol (TYS) functionalized chitosan gold nanocomposite, which is then encapsulated into PVA/AG polymeric matrix using electrospinning. The FESEM, FTIR analysis of prepared TYS-AuNP@PVA/AG NF suggested the successful encapsulation of TYS into the nanofibers. Further, the sustained and long-term stability of TYS in the medium was confirmed by drug release and storage stability studies. The prepared nanomats can absorb the fluid, as evidenced by the swelling index of the nanofibers. The growth and biofilm inhibition, as well as the disintegration studies against Candida, showed 60-70 % biofilm disintegration when 10 mg of TYS-AuNP@PVA/AG NF was used, hence confirming its biological effectiveness. Subsequently, the nanofibers considerably reduced the hydrophobicity index and ergosterol content of the treated cells. Considering the challenges associated with the inhibition/disruption of fungal biofilm, the fabricated nanofibers prove their effectiveness against Candida biofilm. Therefore, nanocomposite-loaded nanofibers have emerged as potential materials that can control fungal colonization and could also promote healing.

Enhanced properties of non-starch polysaccharide and protein hydrocolloids through plasma treatment: A review

Hydrocolloids are important ingredients in food formulations and their modification can lead to novel ingredients with unique functionalities beyond their nutritional value. Cold plasma is a promising technology for the modification of food biopolymers due to its non-toxic and eco-friendly nature. This review discusses the recent published studies on the effects of cold plasma treatment on non-starch hydrocolloids and their derivatives. It covers the common phenomena that occur during plasma treatment, including ionization, etching effect, surface modification, and ashing effect, and how they contribute to various changes in food biopolymers. The effects of plasma treatment on important properties such as color, crystallinity, chemical structure, rheological behavior, and thermal properties of non-starch hydrocolloids and their derivatives are also discussed. In addition, this review highlights the potential of cold plasma treatment to enhance the functionality of food biopolymers and improve the quality of food products. The mechanisms underlying the effects of plasma treatment on food biopolymers, which can be useful for future research in this area, are also discussed. Overall, this review paper presents a comprehensive overview of the current knowledge in the field of cold plasma treatment of non-starch hydrocolloids and their derivatives and highlights the areas that require further investigation.

Fabrication of ɛ-Polylysine-Loaded Electrospun Nanofiber Mats from Persian Gum-Poly (Ethylene Oxide) and Evaluation of Their Physicochemical and Antimicrobial Properties

In the present study, electrospun nanofiber mats were fabricated by mixing different ratios (96:4, 95:5, 94:6, 93:7, and 92:8) of Persian gum (PG) and poly (ethylene oxide) (PEO). The SEM micrographs revealed that the nanofibers obtained from 93% PG and 7% PEO were bead-free and uniform. Therefore, it was selected as the optimized ratio of PG:PEO for the development of antimicrobial nanofibers loaded with ɛ-Polylysine (ɛ-PL). All of the spinning solutions showed pseudoplastic behavior and the viscosity decreased by increasing the shear rate. Additionally, the apparent viscosity, G', and G″ of the spinning solutions increased as a function of PEO concentration, and the incorporation of ɛ-PL did not affect these parameters. The electrical conductivity of the solutions decreased when increasing the PEO ratio and with the incorporation of ɛ-PL. The X-ray diffraction (XRD) and Fourier-transform infrared (FTIR) spectra showed the compatibility of polymers. The antimicrobial activity of nanofibers against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) was investigated, and the samples loaded with ɛ-PL demonstrated stronger antimicrobial activity against S. aureus.

Enhanced viability of probiotics encapsulated within synthetic/natural biopolymers by the addition of gum arabic via electrohydrodynamic processing

To enhance the probiotics' viability, novel vehicles consisting of synthetic/natural biopolymers, i.e., polyvinyl alcohol (PVOH), polyvinylpyrrolidone, whey protein concentrate and maltodextrin, encapsulated with L. plantarum KLDS 1.0328 and gum arabic (GA) as a prebiotic were fabricated by electrohydrodynamic techniques. Inclusion of cells into composites caused an increase in conductivity and viscosity. Morphological analysis showed that cells were distributed along the electrospun nanofibres or distributed randomly in the electrosprayed microcapsules. Both intramolecular and intermolecular hydrogen bond interactions exist between biopolymers and cells. Thermal analysis revealed that the degradation temperatures (>300 °C) of various encapsulation systems have potential applications in heat-treatment foods. Additionally, cells especially immobilized in PVOH/GA electrospun nanofibres showed the highest viability compared with free cells after exposure to simulated gastrointestinal stress. Furthermore, cells retained their antimicrobial ability after rehydration of the composite matrices. Therefore, electrohydrodynamic techniques have great potential in encapsulating probiotics.

Role of bioactive magnetic nanoparticles in the prevention of wound pathogenic biofilm formation using smart nanocomposites

BACKGROUND

Biofilm formation and its resistance to various antibiotics is a serious health problem in the treatment of wound infections. An ideal wound dressing should have characteristics such as protection of wound from microbial infection, suitable porosity (to absorb wound exudates), proper permeability (to maintain wound moisture), nontoxicity, and biocompatibility. Although silver nanoparticles (AgNPs) have been investigated as antimicrobial agents, their limitations in penetrating into the biofilm, affecting their efficiency, have consistently been an area for further research.

RESULTS

Consequently, in this study, the optimal amounts of natural and synthetic polymers combination, along with AgNPs, accompanied by iron oxide nanoparticles (IONPs), were utilized to fabricate a smart bionanocomposite that meets all the requirements of an ideal wound dressing. Superparamagnetic IONPs (with the average size of 11.8 nm) were synthesized through co-precipitation method using oleic acid to improve their stability. It was found that the addition of IONPs to bionanocomposites had a synergistic effect on their antibacterial and antibiofilm properties. Cytotoxicity assay results showed that nanoparticles does not considerably affect eukaryotic cells compared to prokaryotic cells. Based on the images obtained by confocal laser scanning microscopy (CLSM), significant AgNPs release was observed when an external magnetic field (EMF) was applied to the bionanocomposites loaded with IONPs, which increased the antibacterial activity and inhibited the formation of biofilm significantly.

CONCLUSION

These finding indicated that the nanocomposite recommended can have an efficient properties for the management of wounds through prevention and treatment of antibiotic-resistant biofilm.

Electrospinning of botanicals for skin wound healing

Being the first barrier between the human body and external environments, our skin is highly vulnerable to injuries. As one of the conventional therapies, botanicals prepared in different topical formulations have been applied as medical care for centuries. With the current increase of clinical requirements, applications of botanicals are heading towards nanotechnologies, typically fused with electrospinning that forms nanofibrous membranes suitable for skin wound healing. In this review, we first introduced the main process of wound healing, and then presented botanicals integrated into electrospun matrices as either loaded drugs, or carriers, or membrane coatings. In addition, by addressing functional features of individual botanicals in the healing of injured skin, we further discussed the bioactivity of botanical electrospun membranes in relevant to the medical issues solved in the process of wound healing. As achieved by pioneer studies, due to infrequent adverse effects and the diversity in resources of natural plants, the development of electrospun products based on botanicals is gaining greater attention. However, investigations in this field have mainly focused on different methodologies used in the preparation of nanofibrous membranes containing botanicals, their translation into clinical practices remains unaddressed. Accordingly, we propose that potential clinical applications of botanical electrospun membranes require not only the further expansion and understanding of botanicals, but also an establishment of standard criteria for the evaluation of wound healing and evolutions of technologies to support the large-scale manufacturing industry.

Electrospun nanofibers based on carboxymethyl cellulose/polyvinyl alcohol as a potential antimicrobial wound dressing

In this work, citric acid-based quantum dots (CA-QDs) as a novel and safe crosslinked agent was applied in different feeding ratios (5-15 wt%) to synthesize carboxymethyl cellulose/polyvinyl alcohol (CMC/PVA) nanofibers (NFs) for the first time. Colistin (CL) as an antibacterial agent was also loaded (2 w/w%) during the synthesizing process of CMC/PVA electrospun NFs to trigger antimicrobial properties. The morphological, hydrophilic, and mechanical properties of the prepared NFs were fully investigated with different techniques. The electrospun NFs with crosslinking ratios of 10 wt% CA-QDs revealed appropriate mechanical properties. According to cell culture data, the prepared NFs demonstrated good cytocompatibility against HFF-1 cells (over 80% cell viability). Remarkably, CL-loaded NFs showed desired antibacterial efficacy against S. aureus, E. coli, K. pneumoniae, and P. aeruginosa with 1.0-1.4, 1.3-1.4, 0.8-1.0, and 1.3-1.5 cm inhibition zones, respectively. These outcomes suggested that the fabricated NFs can be useful as wound healing scaffolds.

Nanomaterials for application in wound Healing: current state-of-the-art and future perspectives

Nanoparticles are the gateway to the new era in drug delivery of biocompatible agents. Several products have emerged from nanomaterials in quest of developing practical wound healing dressings that are nonantigenic, antishear stress, and gas-exchange permeable. Numerous studies have isolated and characterised various wound healing nanomaterials and nanoproducts. The electrospinning of natural and synthetic materials produces fine products that can be mixed with other wound healing medications and herbs. Various produced nanomaterials are highly influential in wound healing experimental models and can be used commercially as well. This article reviewed the current state-of-the-art and briefly specified the future concerns regarding the different systems of nanomaterials in wound healing (i.e., inorganic nanomaterials, organic and hybrid nanomaterials, and nanofibers). This review may be a comprehensive guidance to help health care professionals identify the proper wound healing materials to avoid the usual wound complications.

Living Lactobacillus-ZnO nanoparticles hybrids as antimicrobial and antibiofilm coatings for wound dressing application

Probiotic bacteria are able to produce antimicrobial substances as well as to synthesize green metal nanoparticles (NPs). New antimicrobial and antibiofilm coatings (LAB-ZnO NPs), composed of Lactobacillus strains and green ZnO NPs, were employed for the modification of gum Arabic-polyvinyl alcohol-polycaprolactone nanofibers matrix (GA-PVA-PCL) against Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa and Candida albicans. The physicochemical properties of ZnO NPs biologically synthesized by L. plantarum and L. acidophilus, LAB-ZnO NPs hybrids and LAB-ZnO NPs@GA-PVA-PCL were studied using FE-SEM, EDX, EM, FTIR, XRD and ICP-OES. The morphology of LAB-ZnO NPs hybrids was spherical in range of 4.56-91.61 nm with an average diameter about 34 nm. The electrospun GA-PVA-PCL had regular, continuous and without beads morphology in the scale of nanometer and micrometer with an average diameter of 565 nm. Interestingly, the LAB not only acted as a biosynthesizer in the green synthesis of ZnO NPs but also synergistically enhanced the antimicrobial and antibiofilm efficacy of LAB-ZnO NPs@GA-PVA-PCL. Moreover, the low cytotoxicity of ZnO NPs and ZnO NPs@GA-PVA-PCL on the mouse embryonic fibroblasts cell line led to make them biocompatible. These results suggest that LAB-ZnO NPs@GA-PVA-PCL has potential as a safe promising antimicrobial and antibiofilm dressing in wound healing against pathogens.

Bio nanocomposites of graphene oxide with carboxymethyl guargum: fabrication and characterization and application for type 1 diabetes

Islet cells transplantation has limitations like low survivability, which can be overcome by using extracellular matrix mimicking three-dimensional (3D) scaffolds, which supports the growth and proliferation of seeded cells. This study was aimed to investigate the role of novel 3D carboxymethyl guargum (CMGG) nanocomposite with reduced graphene oxide (rGO) for proliferation of pancreatic islet cells (RIN-5F) and rate of insulin secretion of RIN-5F cells. Scanning electron microscope and Fourier transform infrared results have demonstrated good porosity and the chemical interactions between CMGG and rGO. Mechanical testing and thermogravimetric analysis of nanofibers have shown good tensile strength and thermal stability with rGO in the nanocomposite. These scaffolds demonstratedin vitrobiocompatibility with acceptable ranges of biodegradability and hemocompatibility. Thein vitrocell proliferation and viability of RIN-5F cells on 3D CMGG nanofibers have significantly increased compared to two-dimensional (2D) cell control. Moreover, the glucose dependent insulin secretion of RIN-5F cells on CMGG nanocomposite has significantly increased upto 4-5 folds than cells on 2D cell control. The biomaterials used in this 3D nanofiber scaffold have shown to be biodegradable and hemocompatible and can be a promising platform for the proliferation and secretion of insulin from beta cells and can be effectively used in transplantation type-1 diabetes.

Electrospun polyvinyl-alcohol/gum arabic nanofibers: Biomimetic platform for in vitro cell growth and cancer nanomedicine delivery

The design of powerful in vitro cell culture platforms to support precision medicine can contribute to predict therapeutic success of cancer patients. Electrospun nanofibers applied to cell culture can mimic extracellular matrix and improve in vitro cell behavior. Here, we describe biocompatible blended polyvinyl-alcohol (PVA)/gum arabic (GA) extracellular matrix (ECM)-like nanofibers for in vitro cell cultures capable of delivering nanocomposite for desired biomedical application. Therefore, PVA/GA ECM-like electrospun nanofibers were developed and characterized. Heat treatment was used to crosslink the nanofibers and biocompatibility was evaluated, which demonstrated the ability of developed platform to provide a cell culture-friendly environment. Previous work demonstrated that GA-gold nanoparticles (GA-AuNPs) in non-cytotoxic concentrations can reduce key metastatic cellular events such as invasion and colony formation of metastatic melanoma cells. Thus, crosslinked nanofibers were functionalized with GA-AuNPs and its cellular delivery was evaluated. GA-AuNPs were efficiently adsorbed onto the PVA/GA nanofibers surface and the system effectively delivered the nanocomposites to metastatic melanoma cells. In conclusion, the described biocompatible system could be prospected as a valuable in vitro tool for precision medicine.

Synthesis and characterization of novel bio-nanocomposite of polyvinyl alcohol-Arabic gum-magnesium oxide via direct blending method

Due to the significance growth in application of polymer-based nanocomposites, different methods of synthesis and different reinforces have been studied in recent years for specific purposes. In this study, using the direct blending process, polyvinyl alcohol-arabic gum-magnesium oxide nanocomposites were synthesized. These synthesized nanocomposites were investigated using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), X-ray energy diffraction (EDS) spectroscopy, X-ray surface elemental mapping (X-Ray Map), transmission electron microscopy (TEM), ultraviolet -visible (UV-vis) spectrophotometry and thermal gravimetery analysis (TGA). The results revealed that size distributions of magnesium oxide nanoparticles and synthesized nanocomposites were between 25-40 nm and 20-90 nm, respectively. Elemental map results show the magnesium oxide nanoparticles were well distributed on polymer matrix walls.

Alkenyl succinic anhydride modified tree-gum kondagogu: A bio-based material with potential for food packaging

Tree gums are a class of abundantly available carbohydrate polymers that have not been explored thoroughly in film fabrication for food packaging. Films obtained from pristine tree gums are often brittle, hygroscopic, and lack mechanical strength. This study focuses on the chemical modification of gum kondagogu using long-chain alkenyl groups of dodecenyl succinic anhydride (DDSA), an esterifying agent that introduces a 12-carbon hydrophobic chain to the kondagogu structure. The esterification reaction was confirmed by ¹H nuclear magnetic resonance and Fourier-transform infrared spectroscopy. The effect of nano-cellulose as an additive on various film properties was investigated. The developed films were characterized for their mechanical, morphological, optical, barrier, antibacterial, and biodegradable properties. The inclusion of long-chain carbon groups acted as internal plasticizers and resulted in an amorphous structure with better film-forming ability, improved hydrophobicity, and higher elongation at break values. The modified films exhibited antibacterial properties and excellent biodegradability under aerobic conditions.

Phthalic anhydride esterified chicha gum: characterization and antibacterial activity

The objective of this research was to modify chicha gum with phthalic anhydride to obtain a new biologically active material. The chemical modification of the gum structure was proven through FTIR, elemental analysis, XRD, TG, and DSC. The derived materials demonstrated excellent inhibitory effect against P. aeruginosa and K. pneumoniae species (rating 100% inhibition) and could also inhibit Escherichia coli growth. The best antimicrobial activity observed for the derivatives suggests that chicha gum hydrophobization due to the addition of phthalic groups improved the interaction of these derivatives with bacterial cell wall components. On the other hand, the derivatives increased CC₅₀ in macrophages but did not present acute toxicity or hemolytic activity, indicating that they are promising for use in prophylaxis or treatment of infections caused by Gram-negative bacteria.

An Overview of Biopolymeric Electrospun Nanofibers Based on Polysaccharides for Wound Healing Management

Currently, despite the thoroughgoing scientific research carried out in the area of wound healing management, the treatment of skin injuries, regardless of etiology remains a big provocation for health care professionals. An optimal wound dressing should be nontoxic, non-adherent, non-allergenic, should also maintain a humid medium at the wound interfacing, and be easily removed without trauma. For the development of functional and bioactive dressings, they must meet different conditions such as: The ability to remove excess exudates, to allow gaseous interchange, to behave as a barrier to microbes and to external physical or chemical aggressions, and at the same time to have the capacity of promoting the process of healing by stimulating other intricate processes such as differentiation, cell adhesion, and proliferation. Over the past several years, various types of wound dressings including hydrogels, hydrocolloids, films, foams, sponges, and micro/nanofibers have been formulated, and among them, the electrospun nanofibrous mats received an increased interest from researchers due to the numerous advantages and their intrinsic properties. The drug-embedded nanofibers are the potential candidates for wound dressing application by virtue of: Superior surface area-to volume ratio, enormous porosity (can allow oxy-permeability) or reticular nano-porosity (can inhibit the microorganisms'adhesion), structural similitude to the skin extracellular matrix, and progressive electrospinning methodology, which promotes a prolonged drug release. The reason that we chose to review the formulation of electrospun nanofibers based on polysaccharides as dressings useful in wound healing was based on the ever-growing research in this field, research that highlighted many advantages of the nanofibrillary network, but also a marked versatility in terms of numerous active substances that can be incorporated for rapid and infection-free tissue regeneration. In this review, we have extensively discussed the recent advancements performed on electrospun nanofibers (eNFs) formulation methodology as wound dressings, and we focused as well on the entrapment of different active biomolecules that have been incorporated on polysaccharides-based nanofibers, highlighting those bioagents capable of improving the healing process. In addition, in vivo tests performed to support their increased efficacy were also listed, and the advantages of the polysaccharide nanofiber-based wound dressings compared to the traditional ones were emphasized.

Modified chicha gum by acetylation for antimicrobial and antiparasitic applications: Characterization and biological properties

It was developed a material to act as an antimicrobial and antiparasitic agent through a modification reaction in the gum structure extracted from the plant Sterculia striata. This material was characterized, the oxidant activity was evaluated and the antimicrobial activity against Candida albicans, Escherichia coli, Pseudomonas aeruginosa, Salmonella Typhimurium and Klebsiella pneumoniae was investigated, in addition to the effect against Leishmania amazonensis, testing its acute toxicity and its cytotoxicity in human cells. Characterization techniques proved the success of chemical modification. The modification led to an increase in antioxidant activity, with excellent antibacterial activity, reaching almost 100% inhibition for P. aeruginosa and S. Typhimurium, and inhibitory effect above 70% against L. amazonensis, with an affinity far superior to the parasite than macrophages. The derivative showed no acute toxicity, it was non-hemolytic, increased cell viability in macrophages and fibroblasts, and stimulated cell proliferation of keratinocytes, thus being a strong candidate to be used as an antimicrobial and antiparasitic agent in biomedical applications.

Electrospun fibers based on carbohydrate gum polymers and their multifaceted applications

Electrospinning has garnered significant attention in view of its many advantages such as feasibility for various polymers, scalability required for mass production, and ease of processing. Extensive studies have been devoted to the use of electrospinning to fabricate various electrospun nanofibers derived from carbohydrate gum polymers in combination with synthetic polymers and/or additives of inorganic or organic materials with gums. In view of the versatility and the widespread choice of precursors that can be deployed for electrospinning, various gums from both, the plants and microbial-based gum carbohydrates are holistically and/or partially included in the electrospinning solution for the preparation of functional composite nanofibers. Moreover, our strategy encompasses a combination of natural gums with other polymers/inorganic or nanoparticles to ensue distinct properties. This early established milestone in functional carbohydrate gum polymer-based composite nanofibers may be deployed by specialized researchers in the field of nanoscience and technology, and especially for exploiting electrospinning of natural gums composites for diverse applications.

Microscopic Techniques for the Analysis of Micro and Nanostructures of Biopolymers and Their Derivatives

Natural biopolymers, a class of materials extracted from renewable sources, is garnering interest due to growing concerns over environmental safety; biopolymers have the advantage of biocompatibility and biodegradability, an imperative requirement. The synthesis of nanoparticles and nanofibers from biopolymers provides a green platform relative to the conventional methods that use hazardous chemicals. However, it is challenging to characterize these nanoparticles and fibers due to the variation in size, shape, and morphology. In order to evaluate these properties, microscopic techniques such as optical microscopy, atomic force microscopy (AFM), and transmission electron microscopy (TEM) are essential. With the advent of new biopolymer systems, it is necessary to obtain insights into the fundamental structures of these systems to determine their structural, physical, and morphological properties, which play a vital role in defining their performance and applications. Microscopic techniques perform a decisive role in revealing intricate details, which assists in the appraisal of microstructure, surface morphology, chemical composition, and interfacial properties. This review highlights the significance of various microscopic techniques incorporating the literature details that help characterize biopolymers and their derivatives.

l-Cysteine-Modified Acacia Gum as a Multifunctional Binder for Lithium-Sulfur Batteries

A binder plays an important role in stabilizing the electrode structure and improving the cyclic stability of batteries. However, the traditional binders are no longer satisfactory in lithium-sulfur (Li-S) batteries because of their failure in accommodating the large volume changes of sulfur and trapping soluble intermediate polysulfides, thus causing severe capacity decay. In this work, we prepared a multifunctional binder for Li-S batteries by merely modifying the acacia gum (AG), a low-cost biomass polymer, with l-cysteine under mild conditions. Owing to the introduced amino and carboxyl branches by the l-cysteine, the modified AG shows enhanced polysulfide trapping ability and can effectively restrain the shuttling of polysulfides. In addition, the introduction of branches can help form a cross-linked 3D network with better mechanical strength and flexibility for adhering sulfur and accommodating the volume changes of cathode materials. As a result, compared with the normally used polyvinylidene fluoride binder and the unmodified AG binder, the l-cysteine-modified AG binder effectively enhanced the rate capability and cycling stability of the Li-S batteries directly using sulfur as the cathode, showing a promising way to prompt the practical use of Li-S batteries.

Gum-based nanocarriers for the protection and delivery of food bioactive compounds

Gums, which for the most part are water-soluble polysaccharides, can interact with water to form viscous solutions, emulsions or gels. Their desirable properties, such as flexibility, biocompatibility, biodegradability, availability of reactive sites for molecular interactions and ease of use have led to their extremely large and broad applications in formation of nanostructures (nanoemulsions, nanoparticles, nanocomplexes, and nanofibers) and have already served as important wall materials for a variety of nano encapsulated food ingredients including flavoring agents, vitamins, minerals and essential fatty acids. The most common gums used in nano encapsulation systems include Arabic gum, carrageenan, xanthan, tragacanth plus some new sources of non-traditional gums, such as cress seed gum and Persian/or Angum gum identified as potential building blocks for nanostructured systems. New preparation techniques and sources of non-traditional gums are still being examined for commercialization in the food nanotechnology area as low-cost and reproducible sources. In this study, different nanostructures of gums and their preparation methods have been discussed along with a review of gum nanostructure applications for various food bioactive ingredients.

Preparation and characterization of nanocomposite films based on gum arabic, maltodextrin and polyethylene glycol reinforced with turmeric nanofiber isolated from turmeric spent

Turmeric nanofibers (TNF) were used as reinforcement in the gum arabic (GA), maltodextrin (MDX) and polyethylene glycol (PEG) matrices to enhance the physicochemical properties. The TNF were prepared from turmeric spent by acid hydrolysis accompanied by high pressure homogenization. The thermal and mechanical properties, structure morphology and antimicrobial activities of the prepared nanocomposites were investigated. Differential scanning calorimetry (DSC) data indicate that the addition of TNF significantly increased the onset temperature (T_o), peak temperature (T_p) and conclusion temperature (T_c) of the melting peaks of nanocomposites, but considerably decreased the enthalpy change values. The tensile properties showed that the addition of TNF enhanced mechanical properties due to the formation of networks within the GA, MDX and PEG. The scanning electron microscopy (SEM) images revealed the films of GA-TNF and MDX-TNF show smooth, homogenous surface due to intermolecular hydrogen bonding, and the film of PEG-TNF shows good dispersion of TNF with PEG matrix with rough surface because of strong interfacial adhesion between TNF and PEG and strong hydrogen bonding, which are further confirmed by the FT-IR spectroscopy. XRD results exhibited the disappearances of peaks of TNF indicating the reinforcement of TNF in the prepared nanocomposite matrices. The antibacterial tests show the prepared nanocomposites exhibited excellent antibacterial performance against Bacillus cereus, Escherichia coli, Staphylococcus aureus and Salmonella typhimurium.

Production of electrospun nanofibers based on graphene oxide/gum Arabic

Over the last few years, the electrospinning technique has attracted significant attention for the production of novel nanofibrous materials. At the same time, the use of graphene oxide and the natural products extracted from plants and/or trees have become very popular in various fields of science. In this work, a new method for the production of nanofibers based on a combination of Gum Arabic (GA), as a natural tree gum exudate, PVA, as an environmentally-friendly stabilizer, and graphene oxide (GO) has been developed and characterized. SEM analysis showed fundamental differences on the surface of bare nanofibers with and without GO, and also significantly smaller fiber diameters in the case of the presence of GO (fibers <100 nm present). Raman spectroscopy confirmed and TGA analysis approximated the content of GO in the nanofibers. Adsorption of methylene blue on the produced nanofibrous membrane was about 50% higher in the presence of GO, which opens the possibility to use GO/GA/PVA fibers in several applications, for example for the removal of dyes.

Tree gum-based renewable materials: Sustainable applications in nanotechnology, biomedical and environmental fields

The prospective uses of tree gum polysaccharides and their nanostructures in various aspects of food, water, energy, biotechnology, environment and medicine industries, have garnered a great deal of attention recently. In addition to extensive applications of tree gums in food, there are substantial non-food applications of these commercial gums, which have gained widespread attention due to their availability, structural diversity and remarkable properties as 'green' bio-based renewable materials. Tree gums are obtainable as natural polysaccharides from various tree genera possessing exceptional properties, including their renewable, biocompatible, biodegradable, and non-toxic nature and their ability to undergo easy chemical modifications. This review focuses on non-food applications of several important commercially available gums (arabic, karaya, tragacanth, ghatti and kondagogu) for the greener synthesis and stabilization of metal/metal oxide NPs, production of electrospun fibers, environmental bioremediation, bio-catalysis, biosensors, coordination complexes of metal-hydrogels, and for antimicrobial and biomedical applications. Furthermore, polysaccharides acquired from botanical, seaweed, animal, and microbial origins are briefly compared with the characteristics of tree gum exudates.

Fabrication and characterization of electrospun nanofibers using flaxseed (Linum usitatissimum) mucilage

The spin ability of flaxseed mucilage (FM) as a new source was evaluated through electrospinning. At various experimental conditions and different solution properties, it was impossible to fabricate FM nanofiber. Thus, polyvinyl alcohol (PVA) was applied as co-polymer to facilitate nanofiber formation. In terms of morphology, FM:polyvinyl alcohol (PVA) nanofiber using a mixture of 3% FM solution and 12% (PVA) solution at ratio of 60:40 was selected as the best sample. The physicochemical properties of the nanofiber was evaluated by scanning electron microscopy (SEM), fourier transform infrared (FTIR), differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA) and X-ray diffraction (XRD). SEM images showed beadless, uniform and smooth nanofibers with an average diameter of 230nm. Based on DSC and TGA results, the thermal stability of the nanofiber was improved by adding PVA. FTIR data revealed that there was no chemical interaction between functional groups of FM and PVA in the nanofiber.