Physical stability of R-(+)-Limonene emulsions stabilized by Ulva fasciata algae polysaccharide

Chemical characterization of polysaccharides from Gracilaria gracilis from Bizerte (Tunisia)

Polysaccharides were extracted from Gracilaria gracilis collected from Manzel Jemil Lake in Bizerte Tunisia, with two different solvents (water and NaOH 0.3 M). Different assays were performed on samples (total sugars, neutral sugars, uronic acids, anhydrogalactose, proteins, sulphates, pyruvates), followed by high performance anion-exchange chromatography (HPAEC) to observe the monosaccharide composition, high pressure size exclusion chromatography with multi-angle laser light scattering (HPSEC-MALS) to obtain the molecular mass, Fourier transform infrared spectroscopy (FTIR), and 1D and 2D nuclear magnetic resonance (NMR) to access to structural data. Results have shown that the polysaccharide extracted from Gracilaria gracilis collected from Manzel Jemil Lake in Bizerte Tunisia, is of agar type but with high molecular mass and some original structural features. Hence, the sample was found to contain 9 % of pyruvate groups and is partly sulphated at the C4 of β-d-galactose and methylated on C2 of anhydro-α-l-galactose. The polymer from G. gracilis from Bizerte thus presents a never described structure that could be interesting for further rheological or biological activities applications.

Modulation the Synergistic Effect of Chitosan-Sodium Alginate Nanoparticles with Ca2+: Enhancing the Stability of Pickering Emulsion on D-Limonene

Pickering emulsions (PEs) have been regarded as an effective approach to sustaining and preserving the bioactivities of essential oils. The aim of this research is to prepare a PE stabilized by chitosan/alginate nanoparticles (CS-SA NPs) for the encapsulation and stabilization of D-limonene. In this work, the influence of calcium ions (Ca2+) on the morphology and interaction of nanoparticles was studied, and then the preparation technology of CS-SA/Ca2+ NPs was optimized. The results showed that the presence of Ca2+ reduced the size of the nanoparticles and made them assume a spherical structure. In addition, under the conditions of 0.2 mg/mL CaCl2, 0.6 mg/mL SA, and 0.4 mg/mL CS, the CS-SA/Ca2+ NPs had the smallest size (274 ± 2.51 nm) and high stability (-49 ± 0.69 mV). Secondly, the PE was prepared by emulsifying D-limonene with CS-SA/Ca2+ NPs, and the NP concentrations and homogenization speeds were optimized. The results showed that the small droplet size PE could be prepared with 2 mg/mL NP and a homogenization speed of 20,000 r/min, and it had excellent antibacterial and antioxidant activities. Most importantly, the emulsion showed higher activity, higher resistance to ultraviolet (UV) and a higher temperature than free D-limonene. This research provides a feasible solution for the encapsulation, protection and delivery of essential oils.

A Comprehensive Review on Ulvan Based Hydrogel and Its Biomedical Applications

Ulvan is a natural sulfated polysaccharide obtained from marine green algae composed of 3-sulfated rhamnoglucuronan as the main component. It has a unique chemical structure that rich of L-rhamnosa, D-glucuronic acid, and L-iduronic acid. Ulvan has a similar structure to glycosaminoglycans (GAGs) in mammals including chondroitin sulfate, dermatan sulfate, and heparan sulfate that has broad range applications for many years. Here, we provide an overview of ulvan based hydrogels for biomedical applications. Hydrogels are one of ulvan advances in polymer science for application in drug delivery, tissue engineering, and wound healing. This review presented an overview about functional information of ulvan based hydrogels and the promising potential in biomedicals collected from published papers in Scopus, PubMed, and Google Scholar. Other important aspects concerning properties, hydrogel-forming mechanisms, and ulvan based hydrogel developments were reported as well. As conclusion, ulvan showed interesting properties in forming hydrogels and promising advances in biomedical applications.

Phytotoxic Effects of Commercial Eucalyptus citriodora, Lavandula angustifolia, and Pinus sylvestris Essential Oils on Weeds, Crops, and Invasive Species

Background: essential oils are well known for their pharmacological effectiveness as well as their repellent, insecticide, and herbicide activities. The emergence of resistant weeds, due to the overuse of synthetic herbicides, makes it necessary to find natural alternatives for weed control. The aim of this study was to evaluate the phytotoxic effects of Eucalyptus citriodora, Lavandulaangustifolia, and Pinus sylvestris, three common commercial essential oils, on weeds (Portulaca oleracea, Lolium multiflorum, and Echinochloa crus-galli), food crops (tomato and cucumber), and the invasive species Nicotiana glauca. Methods: to determine herbicidal effects, essential oils were tested at different concentrations (0.125–1 µL/mL). The index of germination and seedling length data were recorded over 14 days. Results: the in vitro assays showed that L. angustifolia with linalool (38.7 ± 0.1%), 1,8-cineole (26.5 ± 0.1%), and camphor (14.2 ± 0.1%) as the main compounds showed the most phytotoxic effects affecting seed germination in weeds and tomato, and the aforementioned invasive species. L. multiflorum was the most sensitive weed, particularly to lavender essential oil, which decreased the growth of its hypocotyl and radicle by 87.8% and 76.7%, respectively, at a dose of 1 µL/mL. Cucumber was the most resistant food crop, with no significant reduction observed in seed germination and hypocotyl growth with E. citriodora and L. angustifolia essential oils. Conclusions: lavender essential oil represents a promising candidate for the development of effective and safe herbicides in the management of L. multiflorum affecting cucumber crops.

Synthesis and techno-economic assessment of microbial-based processes for terpenes production

BACKGROUND

Recent advances in metabolic engineering enable the production of chemicals from sugars through microbial bio-conversion. Terpenes have attracted substantial attention due to their relatively high prices and wide applications in different industries. To this end, we synthesize and assess processes for microbial production of terpenes.

RESULTS

To explain a counterintuitive experimental phenomenon where terpenes such as limonene (normal boiling point 176 °C) are often found to be 100% present in the vapor phase after bio-conversion (operating at only ~ 30 °C), we first analyze the vapor-liquid equilibrium for systems containing terpenes. Then, we propose alternative production configurations, which are further studied, using limonene as an example, in several case studies. Next, we perform economic assessment of the alternative processes and identify the major cost components. Finally, we extend the assessment to account for different process parameters, terpene products, ways to address terpene toxicity (microbial engineering vs. solvent use), and cellulosic biomass as a feedstock. We identify the key cost drivers to be (1) feed glucose concentration (wt%), (2) product yield (% of maximum theoretical yield) and (3) VVM (Volume of air per Volume of broth liquid per Minute, i.e., aeration rate in min^-1). The production of limonene, based on current experimental data, is found to be economically infeasible (production cost ~ 465 $/kg vs. market selling price ~ 7 $/kg), but higher glucose concentration and yield can lower the cost. Among 12 terpenes studied, limonene appears to be the most reasonable short-term target because of its large market size (~ 160 million $/year in the US) and the relatively easier to achieve break-even yield (~ 30%, assuming a 14 wt% feed glucose concentration and 0.1 min^-1 VVM).

CONCLUSIONS

The methods proposed in this work are applicable to a range of terpenes as well as other extracellular insoluble chemicals with density lower than that of water, such as fatty acids. The results provide guidance for future research in metabolic engineering toward terpenes production in terms of setting targets for key design parameters.