Evaluation of chitosan hydrochloride-alginate as enteric micro-probiotic-carrier with dual protective barriers

Sensitive delivery systems and novel encapsulation technologies for live biotherapeutic products and probiotics

Live biotherapeutic product (LBP), a type of biological product, holds promise for the prevention or treatment of metabolic disease and pathogenic infection. Probiotics are live microorganisms that improve the intestinal microbial balance and beneficially affect the health of the host when ingested in sufficient numbers. These biological products possess the advantages of inhibition of pathogens, degradation of toxins, and modulation of immunity. The application of LBP and probiotic delivery systems has attracted great interest to researchers. The initial used technologies for LBP and probiotic encapsulation are traditional capsules and microcapsules. However, the stability and targeted delivery capability require further improved. The specific sensitive materials can greatly improve the delivery efficiency of LBPs and probiotics. The specific sensitive delivery systems show advantages over traditional ones due to their better properties of biocompatibility, biodegradability, innocuousness, and stability. Moreover, some new technologies, including layer-by-layer encapsulation, polyelectrolyte complexation, and electrohydrodynamic technology, show great potential in LBP and probiotic delivery. In this review, novel delivery systems and new technologies of LBPs and probiotics were presented, and the challenges and prospects were explored in specific sensitive materials for LBP and probiotic delivery.

Spray-dried pH-sensitive chitosan microparticles loaded with Mycobacterium bovis BCG intended for supporting treatment of Helicobacter pylori infection

Gram-negative spiral-shaped Helicobacter pylori (Hp) bacteria induce the development of different gastric disorders. The growing resistance of Hp to antibiotics prompts to search for new therapeutic formulations. A promising candidate is Mycobacterium bovis BCG (BCG) with immunomodulatory properties. Biodegradable mucoadhesive chitosan is a good carrier for delivering BCG mycobacteria to the gastric mucosal environment. This study aimed to show whether BCG bacilli are able to increase the phagocytic activity of Cavia porcellus-guinea pig macrophages derived from the bone marrow towards fluorescently labeled Escherichia coli. Furthermore, to encapsulate live BCG bacilli, in spray-dried chitosan microparticles (CHI-MPs), and assess the pH-dependent release of mycobacteria in pH conditions mimicking gastric (acidic) or gut (alkaline) milieu. Microparticles (MPs) were made of chitosan and coated with Pluronic F-127-(Plur) or N-Acetyl-D-Glucosamine-(GlcNAc) to increase the MPs resistance to low pH or to increase anti-Hp effect, respectively. Spray-drying method was used for microencapsulation of live BCG. The biosafety of tested CHI-MPs has been confirmed using cell models in vitro and the model of guinea pig in vivo. The CHI-MPs loaded with BCG released live mycobacteria at pH 3.0 (CHI-GlcNAc-MPs) or pH 8.0. (CHI-Plur-MPs). The CHI-MPs loaded with live BCG can be used for per os inoculation of Cavia porcellus to check the effectiveness of delivered mycobacteria in increasing anti-H. pylori host response.

Microencapsulation and controlled release of Bacillus clausii through a novel non-digestible carbohydrate formulation as revolutionizing probiotic delivery

Probiotics have gained significant attention in recent years due to the growing awareness of physical health and well-being. However, maintaining high concentrations of probiotics throughout the product's shelf life and during the gastrointestinal tract is crucial for ensuring their health-promoting effects. After determining an optimal formulation through a fractional factorial model, this study optimizes probiotic Bacillus Clausii delivery through spray-drying microencapsulation using a novel maltodextrin-alginate-inulin (MDX-ALG-IN) formulation (optimized ratio: 7:2:1). Notably, this formulation exclusively comprises non-digestible carbohydrates, marking a novel approach in probiotic encapsulation. Achieving a high Product Yield (51.06 %) and Encapsulation Efficiency (80.53 %), the study employed SEM for morphological analysis, revealing an irregular form and extensive surface in dentations characteristic of maltodextrin involvement. With a low moisture content of 3.02 % (±0.23 %) and 90.52 % solubility, the powder displayed exceptional properties. Probiotic viability remained robust, surviving up to 60 % even after 180 days at 4 °C, 25 °C, and 37 °C. Thermal characterization unveiled microcapsule resilience, exhibiting a glass transition temperature (Tg) at 138.61 °C and a melting point of 177.28 °C. The study systematically addresses crucial aspects of microencapsulation, including formulation optimization, morphological characteristics, and powder properties. Notably, the MDX-ALG-IN microcapsules demonstrated stability in simulated gastrointestinal conditions, indicating potential application for supplements and complex food matrices. In summary, this research contributes to microencapsulation understanding, emphasizing the MDX-ALG-IN formulation's efficacy in preserving probiotic viability across production stages and simulated digestive processes.

Survivability of probiotics encapsulated in kelp nanocellulose/alginate microcapsules on microfluidic device

Probiotics are living microorganisms that can produce health benefits to the host only when they are ingested in sufficient quantities and reach the intestines active state. However, the external environment that probiotics face for a long time before administration and the low pH environment in the stomach after administration can greatly reduce their activity. In this work, we proposed a simple microfluidic encapsulation strategy to efficiently prepare the probiotics-loaded nanocellulose/alginate delivery system, which can improve the storage stability and gastrointestinal survival rate of probiotics. The microcapsules were found to be monodisperse, and the average particle size was<500 μm by observing the microstructure and macroscopic morphology. The kelp nanocellulose was cross-linked in the microcapsule and formed a dense surface with alginate. Through the simulated gastrointestinal digestion experiment, it was found that the survival of probiotics in microcapsules containing 0.5 % and 1.5 % kelp nanocellulose decreased by 1.77 log CFU/g and 1.65 log CFU/g respectively, which was significantly lower than that of nanocellulose-free microcapsules (3.70 log CFU/g). And all the treated groups could release probiotics above 7 log CFU/g after digesting intestinal juice for 6 h. Furthermore, through the storage experiment, it was found that the microcapsules with 1.5 % kelp nanocellulose could still release 8.07 log CFU/g probiotics after four weeks. The results provide a new strategy for probiotics processing and extensive high-value utilization of marine natural products.

Applications of Biopolymers for Drugs and Probiotics Delivery

Research regarding the use of biopolymers has been of great interest to scientists, the medical community, and the industry especially in recent years. Initially used for food applications, the special properties extended their use to the pharmaceutical and medical industries. The practical applications of natural drug encapsulation materials have emerged as a result of the benefits of the use of biopolymers as edible coatings and films in the food industry. This review highlights the use of polysaccharides in the pharmaceutical industries and as encapsulation materials for controlled drug delivery systems including probiotics, focusing on their development, various applications, and benefits. The paper provides evidence in support of research studying the use of biopolymers in the development of new drug delivery systems, explores the challenges and limitations in integrating polymer-derived materials with product delivery optimization, and examines the host biological/metabolic parameters that can be used in the development of new applications.

Using zeta potential to study the ionisation behaviour of polymers employed in modified-release dosage forms and estimating their pKa

A range of enteric polymers is used in pharmaceutical industry for developing gastro-resistant formulations. It is generally implied that these coatings are interchangeable due to similar dissolution pH thresholds reported by suppliers. Despite rapid dissolution in compendial phosphate buffers, these products can take up to 2 h to disintegrate in-vivo in the human small intestine. The factors primarily responsible for such variability in dissolution of these polymeric coatings are the differences in ionisation of acidic functional groups on polymer chains and their interplay with ions and buffer species present in gastrointestinal fluids. In this study, we aim to develop a novel, simple and inexpensive technique that can be used under various in-vitro conditions to study the ionisation behaviour of commonly used polymers (EUDRAGIT-E100, L100, S100, HPMC AS-LF, AS-HF, HP-50, HP-55) and to estimate their pK_a. Moreover, this method was successfully applied to study the ionisation behaviour of a range of natural polymers (Guar, Tara, locust bean, Konjac gums, gum Arabic, citrus pectin, chitosan and alginate) and their pK_a was also estimated. The proposed method would allow a better understanding of the dissolution behaviour of these polymers within gastrointestinal tract and will aid rational design of modified release dosage forms.

Extending Viability of Bifidobacterium longum in Chitosan-Coated Alginate Microcapsules Using Emulsification and Internal Gelation Encapsulation Technology

Bifidobacteria are considered one of the most important intestinal probiotics because of their significant health impact. However, this ability is usually limited by gastrointestinal fluid and temperature sensitivity. Emulsification and internal gelation is an encapsulation technique with great potential for probiotic protection during storage and the gastrointestinal transit process. This study prepared microcapsules using an emulsification and internal gelation encapsulation method with sodium alginate, chitosan, and Bifidobacterium longum as wall material, coating material, and experimental strain, respectively. Optical, scanning electron, and focal microscopes were used to observe the microcapsule surface morphology and internal viable cell distribution, and a laser particle size analyzer and zeta potentiometer were used to evaluate the chitosan-coating characteristics. In addition, microcapsule probiotic viability after storage, heat treatment, and simulated gastrointestinal fluid treatment were examined. Alginate microcapsules and chitosan-coated alginate microcapsules both had balling properties and uniform bacterial distribution. The latter kept its balling properties after freeze-drying, verified by scanning electronic microscopy (SEM), and had a clear external coating, observed by an optical microscope. The particle size of chitosan-coated alginate microcapsules was slightly larger than the uncoated microcapsules. The zeta potential of alginate and chitosan-coated alginate microcapsules was negative and positive, respectively. Heat, acid and bile salt tolerance, and stability tests revealed that the decrease of viable cells in the chitosan-coated alginate microcapsule group was significantly lower than that in uncoated microcapsules. These experimental results indicate that the chitosan-coated alginate microcapsules protect B. longum from gastrointestinal fluid and high-temperature conditions.

Construction of multilayer alginate hydrogel beads for oral delivery of probiotics cells

Multilayer alginate hydrogel beads (MAHBs), which were prepared by emulsion method, had been fabricated via the ionic crosslinking between calcium ion (Ca²⁺) and carboxylic group of alginate and utilized as encapsulating material for oral delivery of a model probiotic bacteria Bifidobacterium breve. Optical and fluorescence microscopy obviously showed the microorganism cells were encapsulated in the core beads. The viability of B. breve cells encapsulated in MAHBs was significantly enhanced compared with ordinary free cultured ones, the top CFU per mL were (3.70±0.20)×10⁷ and (2.61±0.22)×10⁷ respectively. Meanwhile, B. breve cells encapsulated in MAHBs could still keep viability even after 12h' culture in the broth with pH value similar to gastric juice, while the free cultured cells had no activity in such culture condition. To test applicability of MAHBs for the delivery of microorganisms, a Gram-positive strain, Staphylococcus aureus, as well as a Gram-negative strain, Escherichia coli, were also employed and encapsulated in MAHBs. Similar to B. breve cells, the viability of encapsulated S. aureus cells and E. coli cells in extreme pH value environment were significantly promoted. In addition, a high α-amylase yielding efficiency Bacillus subtilis strain was found and encapsulated in MAHBs. Compared with control groups, MAHBs encapsulated B. subtilis cells produced more α-amylase after 240h' culture, while the release of this enzyme was sustained rather than the burst release like free cultured group, which means this system would not reduce metabolite yield while having long term sustained-release effect. In summary, MAHBs are favorable biological carrier, which has the potential of being applied to oral delivery of probiotics.

Polyelectrolyte complexes based on alginate/tanfloc: Optimization, characterization and medical application

Hydrogels based on alginate and tanfloc (a cationic biopolymer obtained from natural condensed tannins) were successfully prepared. Tanfloc (TN) presents high aqueous solubility at pHs lower than 10; it contains substituted amino sites and molar weight of ca. 600,000gmol^-1. A factorial design (2²) was used to optimize the yield of alginate/tanfloc polyelectrolyte complexes (PECs). Dialysis recovered the overplus of alginate (AG) no complexed with TN. These materials were characterized by thermal analyses (TGA/DTG and DSC), zeta potential, and FTIR, while SEM technique depicted a rough surface on AG/TN complex, containing non-homogeneous pores. Indeed, the AG and TN were tailored to elicit scaffold materials with outstanding cytocompatibility, mainly upon mouse preosteoblastic cells because of reconstruction of bone tissues (119% at 10days). The AG/TN complex also displayed antioxidant and bactericidal activities against Staphylococcus aureus (S. aureus). Besides, the pristine TN fostered bacteriostatic and bactericidal performances towards S. aureus and Escherichia coli. However, for our best knowledge, no studies were still carried out on TN and TN-based materials for medical purpose.