Gentamicin modified chitosan film with improved antibacterial property and cell biocompatibility

Antimicrobial and hydrophobic cellulose paper prepared by covalently attaching cinnamaldehyde for strawberries preservation

The demand for paper-based packaging materials as an alternative to incumbent disposable petroleum-derived polymers for food packaging applications is ever-growing. However, typical paper-based formats are not suitable for use in unconventional applications due to inherent limitations (e.g., excessive hydrophilicity, lack antimicrobial ability), and accordingly, enabling new capabilities is necessity. Herein, a simple and environmentally friendly strategy was proposed to introduce antimicrobial and hydrophobic functions to cellulose paper through successive chemical grafting of 3-aminopropyltriethoxysilane (APS) and cinnamaldehyde (CA). The results revealed that cellulose paper not only showed long-term antibacterial effect on different bacteria, but also inhibited a wide range of fungi. Encouragingly, the modified paper, which is fluorine-free, displays a high contact angle of 119.7°. Thus, even in the wet state, the modified paper can still maintain good mechanical strength. Meanwhile, the multifunctional composite papers have excellent biocompatibility and biodegradability. Compared with ordinary cellulose paper, multifunctional composite paper can effectively prolong the shelf life of strawberries. Therefore, the multifunctional composite paper represents good application potential as a fruit packaging material.

Self-controllable proteinic antibacterial coating with bacteria-triggered antibiotic release for prevention of periprosthetic infection

Periprosthetic infection is a devastating postimplantation complication in which a biofilm layer harboring invasive microorganisms forms around orthopedic implants, leading to severe implant failure and patient morbidity. Despite the development of several infection-triggered antibiotic release approaches, most current antibacterial coatings are susceptible to undesired antibiotic leakage or mechanical disintegration during prosthesis installation. Herein, we propose a self-controllable proteinic antibacterial coating capable of both long-lasting adherence onto titanium implant substrates over the implant fixation period and instantaneous bacterial eradication. Importantly, the pH-dependent reversible metal coordination of mussel adhesive protein (MAP) enabled bacterial concentration-dependent antibiotic delivery in response to infection-induced acidification. In addition, the MAP coating exhibited superior self-healable adhesive properties and scratch resistance, which enabled to avert issues associated with mechanical damages, including peeling and cracking, often occurring in conventional implant coating systems. The gentamicin-loaded MAP coating exhibited complete inhibition of bacterial growth in vivo against Staphylococcus aureus penetrations during implantation surgery (immediate infection) and even 4 weeks after implantation (delayed infection). Thus, our antibiotic-loaded MAP hydrogel coating can open new avenues for self-defensive antibiotic prophylaxis to achieve instant and sustainable bacteriocidal activity in orthopedic prostheses. © 2017 Elsevier Inc. All rights reserved.

Preparation and investigation of a novel antibacterial collagen-based material loaded with gentamicin following surface modification with citric acid for corneal tissue engineering

Corneal disease is an important clinical problem that affects millions of blind people and keratoplasty is currently the most successful treatment for corneal blindness. Unfortunately, there is a very high risk of bacterial infection during corneal transplantation. In this study, we proposed a novel synthetic collagen-based film for corneal therapy, and we effectively incorporated aminoglycoside gentamicin molecules onto the surface of the collagen film. We anticipate that this collagen-based substance will be antimicrobial and repair corneal tissue damage. Three steps were used to create this gentamicin-modified carboxylated collagen film, including: (i) Cross-link the collagen molecules with 1-ethyl-3- (3-dimethylaminopropyl) carbodiimide and n-hydroxysuccinimide to create a collagen (Col) film. (ii) Citric acid was used to modify the Col film's surface in order to increase the number of carboxyl groups there (ColCA). (iii) Gentamicin molecules were grafted onto the surface of ColCA film by forming amide bonds (ColCA-GM). We discovered that this ColCA-GM film has good physicochemical properties and excellent biocompatibility. Furthermore, it was demonstrated that treating collagen films with citric acid significantly improved the antibacterial properties of ColCA-GM film. The outcomes point to a variety of potential applications for this novel film in corneal tissue engineering.

Chitosan-gentamicin conjugate attenuates heat stress-induced intestinal barrier injury via the TLR4/STAT6/MYLK signaling pathway: In vitro and in vivo studies

Heat stress (HS) has a negative impact on animal health. A modified chitosan-gentamicin conjugate (CS-GT) was prepared to investigate its potential protective effects and mechanism of action on heat stress-induced intestinal mucosa injury in IPEC-J2 cells and mouse 3D intestinal organs in a mouse model. CS-GT significantly (P < 0.01) reversed the decline in transmembrane resistance and increased the FITC-dextran permeability of the IPEC-J2 monolayer fusion epithelium caused by heat stress. Heat stress decreased the expression of the tight binding proteins occludin, claudin1, and claudin2. However, pretreatment with CS-GT significantly increased (P < 0.01) the expression of these tight binding proteins. Mechanistically, CS-GT inhibited the activation of the TLR4/STAT6/MYLK signaling pathway induced by heat stress. Molecular docking showed that CS-GT can bind effectively with TLR4. In conclusion, CS-GT alleviates heat stress-induced intestinal mucosal damage both in vitro and in vivo. This effect is mediated, at least partly, by the inhibition of the TLR4/STAT6/MYLK signaling pathway and upregulation of tight junction proteins. These findings suggest that CS-GT may have therapeutic potential in the prevention and treatment of heat stress-related intestinal injury.

Recent advances in chitosan-based materials; The synthesis, modifications and biomedical applications

The attention to polymer-based biomaterials, for instance, chitosan and its derivatives, as well as the techniques for using them in numerous scientific domains, is continuously rising. Chitosan is a decomposable naturally occurring polymeric material that is mostly obtained from seafood waste. Because of its special ecofriendly, biocompatible, non- toxic nature as well as antimicrobial properties, chitosan-based materials have received a lot of interest in the field of biomedical applications. The reactivity of chitosan is mainly because of the amino and hydroxyl groups in its composition, which makes it further fascinating for various uses, including biosensing, textile finishing, antimicrobial wound dressing, tissue engineering, bioimaging, gene, DNA and drug delivery and as a coating material for medical implants. This study is an overview of the different types of chitosan-based materials which now a days have been fabricated by applying different techniques and modifications that include etherification, esterification, crosslinking, graft copolymerization and o-acetylation etc. for hydroxyl groups' processes and acetylation, quaternization, Schiff's base reaction, and grafting for amino groups' reactions. Furthermore, this overview summarizes the literature from recent years related to the important applications of chitosan-based materials (i.e., thin films, nanocomposites or nanoparticles, sponges and hydrogels) in different biomedical applications.

Biodegradable wound dressing-based collagen/hyaluronic acid loaded antibacterial agents for wound healing application

Three biodegradable wound dressing based on binary Collagen (COL), Hyaluronic acid (HA) crosslinked loaded with silver nanoparticles (AgNPs), Gentamicin (GENT) and AgNPs/GENT successfully prepared using freeze drying technique. Chemical evaluations for synthesized membranes were carried out using FTIR- ATR. While physical properties were evaluated through swelling and degradation percent. Antibacterial activity was evaluated against G+, G-, yeast and fungi. Finally, cytotoxicity and wound healing evaluations were carried out against skin fibroblast normal cell line, while anti-inflammatory evaluated using RAW 264.7 macrophage cell line. The three produced membrane showed physically interaction between polymer network and the loaded antibiotic. Swelling properties showed superior results for three membranes. Degradability of prepared sheets was rapidly no more than three days. Toxicity evaluations and anti-inflammatory showed superior results for all examined samples except mixed with AgNPs and Gentamicin (GENT). Antibacterial activity showed resistance to G+, G- and yeast. All prepared sheet showed safe towards cell except COL/HA/AgNPs/GENT. Wound healing studied showed efficient of both COL/HA/AgNPs and COL/HA/GENT compared to blank and mixed membrane COL/HA/AgNPs/GENT. The obtained results recommended COL/HA loaded individually either AgNPs or Gentamicin (GENT) as antibacterial and wound healing sheet rather than mixed prepared membrane.

Gentamicin Sulfate Grafted Magnetic GO Nanohybrids with Excellent Antibacterial Properties and Recyclability

In this study, magnetic graphene oxide (MGO) nanohybrids were first prepared by loading Fe₃O₄ NPs onto graphene oxide (GO). Then, GS-MGO nanohybrids were prepared by grafting gentamicin sulfate (GS) onto MGO directly using a simple amidation reaction. The prepared GS-MGO had the same magnetism as MGO. They exhibited excellent antibacterial ability against Gram-negative bacteria and Gram-positive bacteria. The GS-MGO had excellent antibacterial performance against Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), and Listeria monocytogenes (L. monocytogenes). When the addition concentration of GS-MGO was 1.25 mg/mL, the calculated bacteriostatic ratios against E. coli and S. aureus achieved 89.8% and 100%, respectively. For L. monocytogenes, only 0.05 mg/mL of GS-MGO had an antibacterial ratio as high as 99%. In addition, the prepared GS-MGO nanohybrids also exhibited excellent non-leaching activity with good recycling antibacterial ability. After eight times antibacterial tests, GS-MGO nanohybrids still exhibited an excellent inhibition effect on E. coli, S. aureus, and L. monocytogenes. Therefore, as a non-leaching antibacterial agent, the fabricated GS-MGO nanohybrid had dramatic antibacterial properties and also showed great recycling ability. Thus, it displayed great potential in the design of novel recycling antibacterial agents with non-leaching activity.

Novel bilayer coating on gentamicin-loaded titanium nanotube for orthopedic implants applications

Fabricating a multifunctional orthopedic implant which prevents post-surgery infection is highly desirable in advanced materials applications. However, designing an antimicrobial implant, which simultaneously promotes a sustained drug release and satisfactory cell proliferation, remains a challenge. The current study presents a drug-loaded surface-modified titanium nanotube (TNT) implant with different surface chemistry which was developed to investigate the effect of surface coating on drug release, antimicrobial activity, and cell proliferation. Accordingly, sodium alginate and chitosan were coated on the surface of TNT implants with different coating orders through layer-by-layer assembly. The coatings' swelling ratio and degradation rate were around 613% and 75%, respectively. The drug release results showed that surface-coatings prolonged the releasing profile for about 4 weeks. Chitosan coated TNTs demonstrated greater inhibition zone at 16.33mm compared with the other samples where no inhibition zone was observed. However, chitosan and alginate coated TNTs exhibited smaller inhibition zones at 48.56mm and 43.28mm, respectively, compared to bare TNT, which can be attributed to the coatings preventing the antibiotic burst release. Higher viability of cultured osteoblast cells was observed for chitosan-coated TNT as the top layer compared to the bare TNT at 12.18%, indicating improved bioactivity of TNT implants when the chitosan has the most contact with cells. Coupled with the cell viability assay, molecular dynamics (MD) simulations were carried out by placing collagen and fibronectin near the considered substrates. In agreement with cell viability results, MD simulations also indicated that chitosan had the highest adsorption energy approximately 60Kcal/mol. In summary, the proposed bilayer chitosan-coated drug-loaded TNT implant with chitosan and sodium alginate coating as the top and the bottom layers, respectively, can be a potential candidate for orthopedic applications in the light of its bacterial biofilm prevention, better osteoconductivity, and providing an adequate drug release profile.

Natural rubber latex films with effective growth inhibition against S. aureus via surface conjugated gentamicin

Hospital-associated infections and related complications are of extreme concern in the healthcare sector since biofilms generated over material surfaces not only create turbulence in the healthcare practices followed but also ruin the device performance, and increased medication, leading to significant chances of drug resistance. Natural rubber latex (NRL) being the first choice for the manufacture of several conventional biomedical devices, it is essential to ensure the surfaces of the same are inherently inactive against most microorganisms. This study presents NRL film surface conjugated with a well-known antibiotic, gentamicin through an amide linkage to generate antibacterial activity to the surface with a significant growth inhibition rate, especially against Staphylococcus aureus. The NRL films were surface-oxidized under controlled acidic conditions to generate carboxyl groups exploring the unsaturation of the base monomer unit. The carboxyl group reacts with the amine groups of gentamicin facilitating its surface conjugation. The surface anchoring was authenticated by FTIR-ATR complimented further by contact angle measurement as a function of hydrophilicity and elemental analysis by EDX spectroscopy. The antibacterial efficacy of modified NRL films was evaluated using antibacterial drop test and the results indicated a substantial growth inhibition rate (>60%) against Pseudomonas aeruginosa and Staphylococcus aureus. The study could be further optimized and proposed as a viable route for the conjugation of active molecules over inert polymer molecules.

Gentamicin-loaded chitosan/folic acid-based carbon quantum dots nanocomposite hydrogel films as potential antimicrobial wound dressing

BACKGROUND

To provide effective healing in the wound, various carbohydrate polymers are commonly utilized that are highly potent platforms as wound dressing films. In this work, novel antibacterial flexible polymeric hydrogel films were designed via crosslinking polymeric chitosan (CS) with folic acid-based carbon quantum dots (CQDs). To end this, folic acid as a bio-precursor is used to synthesize CQDs through the hydrothermal technique. The synthesized CQDs as a crosslinking agent was performed at different concentrations to construct nanocomposite hydrogel films via the casting technique. Also, gentamicin (GM), L-Arginine and glycerol were supplemented in the formulation of nanocomposite since their antibiotic, bioactivity and plasticizing ability, respectively.

RESULTS

The successful construction of films were verified with different methods (FT-IR, UV-Vis, PL, SEM, and AFM analyses). The GM release profile displayed a controlled release manner over 48 h with a low initial burst release in the simulated wound media (PBS, pH 7.4). Antibacterial and in vitro cytotoxicity results showed a significant activity toward different gram-positive and negative bacterial strains (about 2.5 ± 0.1 cm inhibition zones) and a desired cytocompatibility against Human skin fibroblast (HFF-1) cells (over 80% cell viability), respectively.

CONCLUSION

The obtained results recommend CQDs-crosslinked CS (CS/CQD) nanocomposite as a potent antimicrobial wound dressing.

Controlled Drug Release Using Chitosan-Alginate-Gentamicin Multi-Component Beads

This study aimed to develop improved multi-component beads with controlled, sustained delivery of antibiotics, such as gentamicin (GM). Antibiotic-loaded beads with rapid-release and the sustained-release system can be used for bone restoration. Single and multi-component beads were prepared by gelation using various combinations of chitosan and calcium chloride as cationic components and alginate and citric acid as anions. GM release was also controlled by crosslinking using citric acid. The optimum beads were obtained using 5% or 2% sodium alginate, 3% chitosan, and 0.1 mol/L citric acid. The beads were characterized by FTIR, TG-DTG, swelling behavior, and SEM. All GM-loaded beads revealed good antimicrobial activity. The rate and kinetics of release in the phosphate buffer solution were controlled by changing the amount of chitosan in the calcium chloride solution and using citric acid as the crosslinking agent. Crosslinked beads were prepared for the release of about 80% of the loaded drug within 24 h. The study concluded that the chitosan-alginate beads provided faster GM release but crosslinking with citric acid was efficient for sustained-release beads containing gentamicin.

Fiber-based photothermal, UV-resistant, and self-cleaning coatings fabricated by silicon grafted copolymers of chitosan derivatives and gallic acid

Superhydrophobic and hydrophobic properties are generally created by adopting low surface free energy materials. Therefore, most studies have focused on creating surface hydrophobicity by using hydrophobic or fluorinated materials. However, few studies are reported on realizing surface hydrophobicity by directly introducing hydrophilic molecules, which is also a challenge. Herein, with platinum nanozyme as the catalyst, the novel hydrophobic coatings have been rapidly gained via anchoring the polymer of hydrophilic gallic acid and chitosan or chitosan quaternary ammonium salt onto cotton fabric surface. Notably, the novel hydrophobic coatings exhibit significant advances compared with conventional hydrophobic ones created by utilizing fluorinated or hydrophobic materials, which breaks the limitation of employing low surface energy materials for gaining surface hydrophobicity. Subsequently, the sodium methyl silicate was grafted on the polymer's coatings to strengthen surface hydrophobicity and the abrasion resistance of hydrophobicity. Interestingly, the heating could induce the hydrophilicity of cotton fabric to recover to hydrophobicity. Moreover, the hydrophobic coatings also possess good photothermal conversion, UV resistance, and anti-oxidation activity for self-cleaning application and oil water separation. Briefly, the present work may open a new direction for preparing novel hydrophobic coatings by combining gallic acid and chitosan-based macromolecular carbohydrates.

Subchondral bone-inspired hydrogel scaffold for cartilage regeneration

Promoting the in situ regeneration of cartilage without additional cells or cytokines remains challenging. Here, inspired by the unique microstructures of subchondral bone, a cell and cytokine free hydrogel scaffold for cartilage regeneration was developed via a strategy of directional lyophilization and postcrosslinking. This strategy achieved intersecting microchannels in an orderly arrangement and an aligned ladder-like texture in a semi-interpenetrating hydrogel network. The resulting hydrogel had similar mechanical properties to the native cartilage extracellular matrix. Incorporating chitosan into the rigid network also endowed the hydrogel with excellent hemostatic properties. By delicately tuning the components and postcrosslinking conditions, the hydrogel was further endowed with suitable swelling and degradation properties for cartilage regeneration. In vitro tests showed that the highly biocompatible hydrogel scaffold could facilitate the migration and chondrogenic differentiation of bone marrow mesenchymal stem cells. In vivo results further verified that the hydrogel could promote the in situ regeneration of cartilage in a rat model of osteochondral defects. In summary, the subchondral bone-like hydrogel revealed promising prospects in cartilage regeneration and a variety of bioremediation applications.

A Review on Antibacterial Biomaterials in Biomedical Applications: From Materials Perspective to Bioinks Design

In tissue engineering, three-dimensional (3D) printing is an emerging approach to producing functioning tissue constructs to repair wounds and repair or replace sick tissue/organs. It allows for precise control of materials and other components in the tissue constructs in an automated way, potentially permitting great throughput production. An ink made using one or multiple biomaterials can be 3D printed into tissue constructs by the printing process; though promising in tissue engineering, the printed constructs have also been reported to have the ability to lead to the emergence of unforeseen illnesses and failure due to biomaterial-related infections. Numerous approaches and/or strategies have been developed to combat biomaterial-related infections, and among them, natural biomaterials, surface treatment of biomaterials, and incorporating inorganic agents have been widely employed for the construct fabrication by 3D printing. Despite various attempts to synthesize and/or optimize the inks for 3D printing, the incidence of infection in the implanted tissue constructs remains one of the most significant issues. For the first time, here we present an overview of inks with antibacterial properties for 3D printing, focusing on the principles and strategies to accomplish biomaterials with anti-infective properties, and the synthesis of metallic ion-containing ink, chitosan-containing inks, and other antibacterial inks. Related discussions regarding the mechanics of biofilm formation and antibacterial performance are also presented, along with future perspectives of the importance of developing printable inks.

Electrospun nanofibers based on carboxymethyl cellulose/polyvinyl alcohol as a potential antimicrobial wound dressing

In this work, citric acid-based quantum dots (CA-QDs) as a novel and safe crosslinked agent was applied in different feeding ratios (5-15 wt%) to synthesize carboxymethyl cellulose/polyvinyl alcohol (CMC/PVA) nanofibers (NFs) for the first time. Colistin (CL) as an antibacterial agent was also loaded (2 w/w%) during the synthesizing process of CMC/PVA electrospun NFs to trigger antimicrobial properties. The morphological, hydrophilic, and mechanical properties of the prepared NFs were fully investigated with different techniques. The electrospun NFs with crosslinking ratios of 10 wt% CA-QDs revealed appropriate mechanical properties. According to cell culture data, the prepared NFs demonstrated good cytocompatibility against HFF-1 cells (over 80% cell viability). Remarkably, CL-loaded NFs showed desired antibacterial efficacy against S. aureus, E. coli, K. pneumoniae, and P. aeruginosa with 1.0-1.4, 1.3-1.4, 0.8-1.0, and 1.3-1.5 cm inhibition zones, respectively. These outcomes suggested that the fabricated NFs can be useful as wound healing scaffolds.

Piperazine ferulate attenuates gentamicin-induced acute kidney injury via the NF-κB/NLRP3 pathway

BACKGROUND

Piperazine ferulate (PF) is widely used in chronic nephritis and nephrotic syndrome in clinic. PF can improve diseases related inflammation by inhibiting the activation of nuclear factor kappa-B (NF-κB) signal. Acute kidney injury (AKI) is usually associated with the occurrence and development of renal inflammation. However, the nephroprotective effect and anti-inflammatory mechanisms of PF on AKI are not clear.

PURPOSE

This study aimed to investigate the nephroprotective effects of PF on gentamicin (GM) induced AKI in rats and its potential mechanisms.

METHODS

Male Sprague Dawley (SD) rats were intraperitoneally injected with GM (100 mg/kg/day) with or without PF (50 and 100 mg/kg/day) for 7 consecutive days. In vitro, the NRK-52e cells were exposed to GM (7 mg/ml) with or without PF (62.5 μg/ml) treatment. The renal injury and cell damage were assessed subsequently.

RESULTS

Our findings showed that PF treatment can significantly improve renal function, reduce renal pathological changes, and attenuate inflammatory response in rats treated with gentamicin. Besides, PF could significantly reduce the cell damage and cellular inflammatory response. In terms of mechanisms, our study revealed that PF can evidently inhibit the activation of NF-κB and nod-like receptor family pyrin domain protein 3 (NLRP3) inflammasome. Meanwhile, it could down regulate the expressions of protein and gene of p-IKKα, p-IKKβ, p-p65, p65, p50, p105, NLRP3 and IL-1β.

CONCLUSION

Our findings showed that PF may improve inflammation by inhibiting the NF-κB/NLRP3 pathway, so as to attenuate AKI.

Date palm seed extract and herbal mixture mitigate gentamicin-induced renal injury in mice: Role of Protease-activated receptors (PARs) and Retinoid X receptor alpha (RXR-α)

Introduction: Gentamicin (Gen) causes renal toxicity by inhibiting protein synthesis in kidney cells, causing proximal tubule cell necrosis and renal failure. Herein, we examined the nephroprotective effect of date palm seed extract (DPSE) and one herbal mixture (HM; composed of Tribulus terrestris, Aerva lanata, Andrographis paniculata, and Raphanus sativus) against Gen-induced renal toxicity in mice with special reference to the possible role of retinoid X receptor alpha (RXR-α) and protease-activated receptor 2 (PAR-2) in this effect. Methods: Thirty-two male Balb/c mice divided randomly into four groups were either treated with saline, Gen (225 mg/kg/i.p., daily from day 3 to day 10), Gen (225 mg/kg i.p.) daily from day 3 to day 10 and DPSE (100 mg/kg/p.o.) daily for 10 days, or Gen (225 mg/kg i.p.) daily from day 3 to day 10 and HM (100 mg/kg/p.o., daily for 10 days). Mice were sacrificed 24 hours after the last dose administration, and kidney tissues were dissected out, weighed, and subjected to histological, immunofluorescence, and biochemical assays. Results: The Gen-induced renal toxicity group demonstrated a significant decrease in RXR-α and a significant increase in PAR-2 protein expression. Treatment with DPSE or HM significantly improved Gen-induced effects on serum creatinine, blood urea nitrogen (BUN), white blood cells (WBCs), platelets, RXR-α extracellular matrix deposition, and PAR-2. Conclusion: The present study stated the nephroprotective effects of DPSE and HM and revealed, for the first time, the involvement of retinoid receptors and PAR-2 in Gen-induced renal toxicity as well as in the protective effects of the two tested natural products.

Effects of Multispecies Probiotic on Intestinal Microbiota and Mucosal Barrier Function of Neonatal Calves Infected With E. coli K99

Altered gut microbiota are implicated in inflammatory neonatal calf diarrhea caused by E. coli K99. Beneficial probiotics are used to modulate gut microbiota. However, factors that mediate host-microbe interactions remain unclear. We evaluated the effects of a combination of multispecies probiotics (MSP) on growth, intestinal epithelial development, intestinal immune function and microbiota of neonatal calves infected with E. coli K99. Twelve newborn calves were randomly assigned as follows: C (control, without MSP); D (E. coli O78:K99 + gentamycin); and P (E. coli O78:K99 + supplemental MSP). All groups were studied for 21 d. MSP supplementation significantly (i) changed fungal Chao1 and Shannon indices of the intestine compared with group D; (ii) reduced the relative abundance of Bacteroides and Actinobacteria, while increasing Bifidobacteria, Ascomycetes, and Saccharomyces, compared with groups C and D; (iii) improved duodenal and jejunal mucosal SIgA and total Short Chain Fatty Acids (SCFA) concentrations compared with group D; (iv) increased relative ZO-1 and occludin mRNA expression in jejunal mucosa compared with group D; and (v) enhanced intestinal energy metabolism and defense mechanisms of calves by reducing HSP90 expression in E. coli K99, thereby alleviating the inflammatory response and promoting recovery of mucosal function. Our research may provide direct theoretical support for future applications of MSP in ruminant production.

Application or function of citric acid in drug delivery platforms

Nontoxic materials with natural origin are promising materials in the designing and preparation of the new drug delivery systems (DDSs). Today's, citric acid (CA) has attracted a great deal of attention because of its special features; green nature, biocompatibility, low price, biodegradability, and commercially available property. So, CA has been employed in the preparation of the various platforms to induce a suitable property on their structure. Recently, several research groups investigated the CA-based platforms in different forms like tablets, dendrimers, hyperbranched polymers, (co)polymer, hydrogels, and nanoparticles as efficient DDSs. By considering an increasing amount of published articles in this field, for the first time, in this review, an overview of the published works regarding CA applications in the design of various DDSs is presented with a detailed and insightful discussion.

Improvement of anti-biofilm activities via co-delivery of curcumin and gentamicin in lipid-polymer hybrid nanoparticle

Pseudomonas aeruginosa is the most common pathogen that causes chronic lung infections and recurrence of the disease in cystic fibrosis patients by hiding inside cells and biofilm matrix. Herein, we developed gentamicin and curcumin-loaded lipid-polymer hybrid nanoparticle- (termed CG-HNPs) to evaluate in vitro activities against biofilm-embedded P. aeruginosa and compared with lipid nanoparticles containing the same drugs (CG-Lip). The nanoparticles were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), dynamic light scattering (DLS), fluorescence spectroscopy, and ultraviolet-visible (UV-vis) spectroscopy, which demonstrated that HNPs with a diameter of approximately 340 nm were uniform. The optimal CG-HNPs formulation illustrated high encapsulation (∼70%) and controlled release characteristics (gradually released in 72 h). The antibacterial activities of generated nanoparticles are maintained against planktonic and biofilm bacteria and it is effective in damage established biofilms. Besides, HNPs were biocompatible and nontoxic to J774 and HFF cell lines and uptake by the macrophages (J774), which facilitated the killing of intracellular bacteria in macrophages. These results introduced CG-HNPs as a promising antibacterial agent for the treatment of chronic infections and intracellular bacteria due to excellent antibacterial activity.

Therapeutic effect and immune mechanism of chitosan-gentamicin conjugate on Pacific white shrimp (Litopenaeus vannamei) infected with Vibrio parahaemolyticus

To explore the disease resistance mechanism of chitosan conjugates, chitosan-gentamicin conjugate (CS-GT) was synthesized and systematically characterized, the immune mechanism of CS-GT on Litopenaeus vannamei infected with Vibrio parahaemolyticus was further explored. The results showed that imine groups in CS-GT were effectively reduced. Dietary supplementation of CS-GT can significantly increase the survival rate, total hemocyte counts, the antioxidant and immune related enzyme activity levels of shrimps (P < 0.05), which are all dose-dependent under the experimental conditions. In addition, CS-GT can protect the hepatopancreas from invading bacteria and alleviate inflammation. Particularly, CS-GT promotes the expressions of legumain (LGMN), lysosomal acid lipase (LIPA) and Niemann-Pick type C2 (NPC2) up-regulated. It is speculated that CS-GT may stimulate the lysosome to phagocytose pathogens more effectively. In conclusions, shrimps fed with CS-GT can produce immune response via lysosome and greatly improve the disease resistance to Vibrio parahaemolyticus.

Physicochemical and Biological Characterisation of Diclofenac Oligomeric Poly(3-hydroxyoctanoate) Hybrids as β-TCP Ceramics Modifiers for Bone Tissue Regeneration

Nowadays, regenerative medicine faces a major challenge in providing new, functional materials that will meet the characteristics desired to replenish and grow new tissue. Therefore, this study presents new ceramic-polymer composites in which the matrix consists of tricalcium phosphates covered with blends containing a chemically bounded diclofenac with the biocompatible polymer-poly(3-hydroxyoctanoate), P(3HO). Modification of P(3HO) oligomers was confirmed by NMR, IR and XPS. Moreover, obtained oligomers and their blends were subjected to an in-depth characterisation using GPC, TGA, DSC and AFM. Furthermore, we demonstrate that the hydrophobicity and surface free energy values of blends decreased with the amount of diclofenac modified oligomers. Subsequently, the designed composites were used as a substrate for growth of the pre-osteoblast cell line (MC3T3-E1). An in vitro biocompatibility study showed that the composite with the lowest concentration of the proposed drug is within the range assumed to be non-toxic (viability above 70%). Cell proliferation was visualised using the SEM method, whereas the observation of cell penetration into the scaffold was carried out by confocal microscopy. Thus, it can be an ideal new functional bone tissue substitute, allowing not only the regeneration and restoration of the defect but also inhibiting the development of chronic inflammation.

Supramolecular aggregates of cyclodextrins with co-solvent modulate drug dispersion and release behavior of poorly soluble corticosteroid from chitosan membranes

In this study, the ability of different beta-cyclodextrins to facilitate homogeneous dispersion of triamcinolone acetonide (TA) into chitosan membranes is assessed. Drug loading was assessed through atomic force microscopy (AFM), scanning electron microscopy (MEV-FEG), and X-ray diffraction analyses. Drug interactions with the co-polymer were investigated with Fourier transform infrared spectroscopy, thermal analyses. Swelling assay, and in vitro drug release experiment were used to assess TA release behavior. Undispersed particles of drug were observed to remain in the simple chitosan membranes. Hydroxypropyl-β-cyclodextrin enabled the dispersion of TA into chitosan membranes and subsequent sustained drug release. In addition, the membrane performance as a drug delivery device is improved by adding specified amounts of the co-solvent triethanolamine. The experimental data presented in this study confirm the utility of our novel and alternative approach for obtaining a promising device for slow and controlled release of glucocorticoids, such as triamcinolone acetonide, for topical ulcerations.

Pristine and Antibiotic-Loaded Nanosheets/Nanoneedles-Based Boron Nitride Films as a Promising Platform to Suppress Bacterial and Fungal Infections

In recent years, bacteria inactivation during their direct physical contact with surface nanotopography has become one of the promising strategies for fighting infection. Contact-killing ability has been reported for several nanostructured surfaces, e.g., black silicon, carbon nanotubes, zinc oxide nanorods, and copper oxide nanosheets. Herein, we demonstrate that Gram-negative antibiotic-resistant Escherichia coli (E. coli) bacteria are killed as a result of their physical destruction while contacting nanostructured h-BN surfaces. BN films, made of spherical nanoparticles formed by numerous nanosheets and nanoneedles with a thickness <15 nm, have been obtained through a reaction of ammonia with amorphous boron. The contact-killing bactericidal effect of BN nanostructures has been compared with a toxic effect of gentamicin released from them. For a wider protection against bacterial and fungal infection, the films have been saturated with a mixture of gentamicin and amphotericin B. Such BN films demonstrate a high antibiotic/antimycotic agent loading capacity and a fast initial and sustained release of therapeutic agents for 170-260 h depending on the loaded dose. The pristine BN films possess high antibacterial activity against E. coli K-261 strain at their initial concentration of 10⁴ cells/mL, attaining >99% inactivation of colony forming units after 24 h, same as gentamicin-loaded (150 μg/cm²) BN sample. The BN films loaded with a mixture of gentamicin (150 and 300 μg/cm²) and amphotericin B (100 μg/cm²) effectively inhibit the growth of E. coli K-261 and Neurospora crassa strains. During immersion in the normal saline solution, the BN film generates reactive oxygen species (ROS), which can lead to accelerated oxidative stress at the site of physical cell damage. The obtained results are valuable for further development of nanostructured surfaces having contact killing, ROS, and biocide release abilities.

Influence of several biodegradable components added to pure and nanosilver-doped PMMA bone cements on its biological and mechanical properties

Acrylic bone cements (BC) are wildly used in medicine. Despite favorable mechanical properties, processability and inject capability, BC lack bioactivity. To overcome this, we investigated the effects of selected biodegradable additives to create a partially-degradable BC and also we evaluated its combination with nanosilver (AgNp). We hypothesized that using above strategies it would be possible to obtain bioactive BC. The Cemex was used as the base material, modified at 2.5, 5 or 10 wt% with either cellulose, chitosan, magnesium, polydioxanone or tricalcium-phosphate. The resulted modified BC was examined for surface morphology, wettability, porosity, mechanical and nanomechanical properties and cytocompatibility. The composite BC doped with AgNp was also examined for its release and antibacterial properties. The results showed that it is possible to create modified cement and all studied modifiers increased its porosity. Applying the additives slightly decreased BC wettability and mechanical properties, but the positive effect of the additives was observed in nanomechanical research. The relatively poor cytocompatibility of modified BC was attributed to the unreacted monomer release, except for polydioxanone modification which increased cells viability. Furthermore, all additives facilitated AgNp release and increased BC antibacterial effectiveness. Our present studies suggest the optimal content of biodegradable component for BC is 5 wt%. At this content, an improvement in BC porosity is achieved without significant deterioration of BC physical and mechanical properties. Polydioxanone and cellulose seem to be the most promising additives that improve porosity and antibacterial properties of antibiotic or nanosilver-loaded BC. Partially-degradable BC may be a good strategy to improve their antibacterial effectiveness, but some caution is still required regarding their cytocompatibility. STATEMENT OF SIGNIFICANCE: The lack of bone cement bioactivity is the main limitation of its effectiveness in medicine. To overcome this, we have created composite cements with partially-degradable properties. We also modified these cements with nanosilver to provide antibacterial properties. We examined five various additives at three different contents to modify a selected bone cement. Our results broaden the knowledge about potential modifiers and properties of composite cements. We selected the optimal content and the most promising additives, and showed that the combination of these additives with nanosilver would increase cements` antibacterial effectiveness. Such modified cements may be a new solution for medical applications.

Antibacterial graphene-based hydroxyapatite/chitosan coating with gentamicin for potential applications in bone tissue engineering

Electrophoretic deposition process (EPD) was successfully used for obtaining graphene (Gr)-reinforced composite coating based on hydroxyapatite (HAP), chitosan (CS), and antibiotic gentamicin (Gent), from aqueous suspension. The deposition process was performed as a single step process at a constant voltage (5 V, deposition time 12 min) on pure titanium foils. The influence of graphene was examined through detailed physicochemical and biological characterization. Fourier transform infrared spectroscopy, field emission scanning electron microscopy, thermogravimetric analysis, X-ray diffraction, Raman, and X-ray photoelectron analyses confirmed the formation of composite HAP/CS/Gr and HAP/CS/Gr/Gent coatings on Ti. Obtained coatings had porous, uniform, fracture-free surfaces, suggesting strong interfacial interaction between HAP, CS, and Gr. Large specific area of graphene enabled strong bonding with chitosan, acting as nanofiller throughout the polymer matrix. Gentamicin addition strongly improved the antibacterial activity of HAP/CS/Gr/Gent coating that was confirmed by antibacterial activity kinetics in suspension and agar diffusion testing, while results indicated more pronounced antibacterial effect against Staphylococcus aureus (bactericidal, viable cells number reduction >3 logarithmic units) compared to Escherichia coli (bacteriostatic, <3 logarithmic units). MTT assay indicated low cytotoxicity (75% cell viability) against MRC-5 and L929 (70% cell viability) tested cell lines, indicating good biocompatibility of HAP/CS/Gr/Gent coating. Therefore, electrodeposited HAP/CS/Gr/Gent coating on Ti can be considered as a prospective material for bone tissue engineering as a hard tissue implant.

Chitosan-collagen based film for controlled delivery of a combination of short life anesthetics

The present research was undertaken to develop a chitosan-collagen film for controlled delivery of combinations of local anesthetics. The film has been prepared by casting which is a versatile, rapid and low-cost approach distinguished by high reproducibility. The mechanical, morphological, and physicochemical properties of the films and the impact of the drug loading were evaluated. We showed that the formulations have a good combination of strength and flexibility with high water permeability. Surface morphology investigation indicates a variation in roughness depending on the loaded compound. Release studies were performed in controlled environments and the data processed by the Higuchi model to assess the dynamics of the release. The local anesthetics, lidocaine, tetracaine, and benzocaine, were uniformly distributed within the matrix and released in a rate and magnitude specific for the drug concentration and combination tunable in a range time from 6 h to 24 h. The films dissolve completely in the physiological environment within 24 h without leaving any toxic metabolites as both of the components are recognized as safe. In vitro cytotoxicity and cell proliferation tests performed on human dermal fibroblast demonstrate the biocompatibility and lack of cytotoxicity of the prepared formulations.

Laboratory Evolution Assays and Whole-Genome Sequencing for the Development and Safety Evaluation of Lactobacillus plantarum With Stable Resistance to Gentamicin

The goal of this work was to use laboratory evolution assays and whole-genome sequencing to develop and test the safety of a probiotic, Lactobacillus plantarum, with high-level of resistance to gentamicin. The evolution of L. plantarum was evaluated under the selective pressure from gentamicin and subsequently when the selective pressure was removed. After 30 days of selective pressure from gentamicin, the minimum inhibitory concentration (MIC) of L. plantarum to gentamicin increased from 4 to 512 μg/mL and remained stable at this level. After removing the selective pressure, the resistance of L. plantarum to gentamicin decreased to 64 μg/mL after 20 days, and remained stable thereafter. Although the MIC declined it was still higher than the cut-off value recommended by EFSA, indicating that the acquisition of gentamicin-resistance was an irreversible process. Using whole-genome sequencing, gene mutations were identified in the strains that had undergone selection pressure from gentamicin as well as in the strains where the selection pressure was subsequently removed. Specifically, four non-synonymous mutations were detected including one single nucleotide polymorphism (SNP), one insertion, and two structural variants (SVs), of which the mutations in genes encoding the drug resistance MFS transporter and transcriptional regulator of AraC family were only detected in the strains under selective pressure from gentamicin. The results indicate that these mutations play an important role in increasing the resistant levels of L. plantarum to gentamicin. The mobility analysis of mutant genes confirmed that they were not located on mobile elements of the genome of highly resistant L. plantarum, indicating that horizontal gene transfer was not possible.

Antimicrobial biopolymer formation from sodium alginate and algae extract using aminoglycosides

Antimicrobial biopolymers provide a biodegradable, sustainable, safe, and cheap approach to drug delivery and wound dressing to control bacterial infection and improve wound healing respectively. Here, we report a one-step method of making antimicrobial alginate polymer from sodium alginate and aqueous extract of Wakame using antibiotic aminoglycosides. Thin layer chromatography of commercially available sodium alginate and Wakame extract showed similar oligosaccharide profiles. Screening of six aminoglycosides showed that kanamycin disulfate and neomycin sulfate produces the highest amount of biopolymer; however, kanamycin disulfate produces the most malleable and form fitting biopolymer. Image texture analysis of biopolymers showed similar quantification parameters for all the six aminoglycosides. Weight of alginate polymer as a function of aminoglycoside concentration follows a growth model of prion protein, consistent with the aggregating nature of both processes. Slow release of antibiotics and the resulting zone of inhibition against E. coli DH5α were observed by agar well diffusion assay. Inexpensive method of production and slow release of antibiotics will enable diverse applications of antimicrobial alginate biopolymer reported in this paper.

A proteomics study to explore the role of adsorbed serum proteins for PC12 cell adhesion and growth on chitosan and collagen/chitosan surfaces

The aim of this article is to apply proteomics in the comparison of the molecular mechanisms of PC12 cell adhesion and growth mediated by the adsorbed serum proteins on the surfaces of chitosan and collagen/chitosan films. First, the chitosan and the collagen/chitosan films were prepared by spin coating; and their surface morphologies were characterized by scanning electron microscopy, X-ray energy dispersive spectroscopy, contact angle measurement and Fourier transform infrared spectroscopy. Subsequently, cell proliferation experiments on two materials were performed and the dynamic curves of protein adsorption on their surfaces were measured. Then, proteomics and bioinformatics were used to analyze and compare the adsorbed serum proteins on the surfaces of two biomaterials; and their effects on cell adhesion were discussed. The results showed that the optimum concentration of chitosan film was 2% w/v. When compared with chitosan film, collagen/chitosan film promoted the growth and proliferation of PC12 cells more significantly. Although the dynamic curves showed no significant difference in the total amount of the adsorbed proteins on both surfaces, proteomics and bioinformatics analyses revealed a difference in protein types: the chitosan surface adsorbed more vitronectin whereas collagen/chitosan surface adsorbed more fibronectin 1 and contained more cell surface receptor binding sites and more Leu-Asp-Val sequences in its surface structure; the collagen/chitosan surface were more conducive to promoting cell adhesion and growth.

Microbicidal gentamicin-alginate hydrogels

Sodium alginate (Alg) reacted with antibiotic gentamicin sulfate (GS) in an aqueous-phase condition mediated by carbodiimide chemistry, in the molar ratios Alg: GS of (1:0.5), (1:1) and (1:2). The Alg-GS conjugated derivatives were characterized by elemental analysis for nitrogen content, Fourier transform infrared spectroscopy in the attenuated total reflection mode (FTIR-ATR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), thermogravimetric analyses (TGA) and water sorption measurements. XPS and FTIR-ATR analyses clearly indicated that GS molecules covalently attached to the backbone of the alginate chains by amide bond formation. The highest amount of GS bound to Alg (43.5 ± 0.4 wt%) and the highest swelling ratio (4962 ± 661%) were observed for the Alg-GS (1:2) sample. Bioluminescence assays with Pseudomonas aeruginosa PAO1/lecA:lux and colony forming counting of Staphylococcus aureus and Escherichia coli upon contact with all Alg-GS conjugates revealed microbicidal activity; however, Alg-GS (1:2) was the most efficient, due to the highest GS content.

Preparation and Properties of Sodium Carboxymethyl Cellulose/Sodium Alginate/Chitosan Composite Film

A sodium alginate/chitosan solution was prepared by dissolving sodium alginate, chitosan, and glycerol in an acetic acid solution. This solution was then combined with a sodium carboxymethyl cellulose solution and the mixture was cast onto a glass plate and dried at a constant temperature of 60 °C. Then, a carboxymethyl cellulose/sodium alginate/chitosan composite film was obtained by immersing the film in a solution of a cross-linking agent, CaCl2, and air-drying the resulting material. First, the most advantageous contents of the three precursors in the casting solution were determined by a completely random design test method. Thereafter, a comprehensive orthogonal experimental design was applied to select the optimal mass ratio of the three precursors. The composite film obtained with sodium alginate, sodium carboxymethyl cellulose, and chitosan contents of 1.5%, 0.5%, and 1.5%, respectively, in the casting solution displayed excellent tensile strength, water vapor transmission rate, and elongation after fracture. Moreover, the presence of chitosan successfully inhibited the growth and reproduction of microorganisms. The composite film exhibited antibacterial rates of 95.7% ± 5.4% and 93.4% ± 4.7% against Escherichia coli and Staphylococcus aureus, respectively. Therefore, the composite film is promising for antibacterial food packaging applications.

Intermolecular interaction and solid state characterization of abietic acid/chitosan solid dispersions possessing antimicrobial and antioxidant properties

The aim of this work was to prepare and characterize solid dispersions of abietic acid (AB) and chitosan (CS) to investigate how formulation of the mixture may help in the battle against microbial colonization in different areas, such as the biomedical field or the food industry. Solid dispersions were characterized by differential scanning calorimetry, infrared spectroscopy, Raman spectroscopy, polarized optical microscopy, zeta potential and size analysis. The data showed that the dispersion/solvent evaporation method formed solid dispersions in which abietic acid was molecularly dispersed in the carrier. A synergistic effect between the two components in terms of antioxidant and antimicrobial properties was found, especially in the formulations obtained with 1/1 AB/CS molar ratio. Interestingly, the aggregation state (amorphous/crystalline) of AB seemed to affect the antimicrobial activity of the formulation, suggesting increased bioactivity when the drug was in the amorphous state. These findings, together with the demonstrated biocompatibility of the formulations, seem to open promising perspectives for a successful application of the developed AB/CS formulations in the biomedical field or in the food industry.