The facile synthesis of a chitosan Cu(II) complex by solution plasma process and evaluation of their antioxidant activities

Superassembled MXene-carboxymethyl chitosan nanochannels for the highly sensitive recognition and detection of copper ions

Copper ions (Cu2+), as a crucial trace element, play a vital role in living organisms. Thus, the detection of Cu2+ is of great significance for disease prevention and diagnosis. Nanochannel devices with an excellent nanoconfinement effect show great potential in recognizing and detecting Cu2+ ions. However, these devices often require complicated modification and treatment, which not only damages the membrane structure, but also induces nonspecific, low-sensitivity and non-repeatable detection. Herein, a 2D MXene-carboxymethyl chitosan (MXene/CMC) freestanding membrane with ordered lamellar channels was developed by a super-assembly strategy. The introduction of CMC provides abundant space charges, improving the nanoconfinement effect of the nanochannel. Importantly, the CMC can chelate with Cu2+ ions, endowing the MXene/CMC with the ability to detect Cu2+. The formation of CMC-Cu2+ complexes decreases the space charges, leading to a discernible variation in the current signal. Therefore, MXene/CMC can achieve highly sensitive and stable Cu2+ detection based on the characteristics of nanochannel composition. The linear response range for Cu2+ detection is 10-9 to 10-5 M with a low detection limit of 0.095 nM. Notably, MXene/CMC was successfully applied for Cu2+ detection in real water and fetal bovine serum samples. This work provides a simple, highly sensitive and stable detection platform based on the properties of the nanochannel composition.

Adsorptive removal of aflatoxin B1 from water and edible oil by dopamine-grafted biomass chitosan-iron-cobalt spinel oxide nanocomposite: mechanism, kinetics, equilibrium, thermodynamics, and oil quality

Currently, the use of magnetic physical adsorbents for detoxification is widely applied in the food industry; however, the fabrication of high-efficiency low-cost absorbents without damaging the nutritional quality of food is a major challenge. Herein, a simple, green, efficient, and cost-effective method for the magnetic solid-phase extraction of aflatoxin B1 (AFB1) from edible oils and aqueous matrices was developed using a dopamine-loaded biomass chitosan-iron-cobalt spinel oxide nanocomposite (DC/CFOS NC). The characterization, physicochemical processes, mechanism, and reusability of DC/CFOS were systematically evaluated in detail. It was found that the adsorption characteristic of DC/CFOS NC was accurately represented by the pseudo-second-order kinetics (k2 = 0.199 g mg-1 min-1) and Freundlich isotherm models (Kf = 1.139 (mg g-1) (L mg-1), R2 = 0.991)), and its adsorptive process is feasible, spontaneous, and exothermic. Benefiting from its high specific surface area, microporous structure, and polar/non-polar active sites, the as-prepared DC/CFOS exhibited an excellent adsorption performance for AFB1 (50.0 μg mL-1), as measured using the Freundlich isotherm model. The mechanistic studies demonstrated that the synergistic effects of the surface complexation and electrostatic interactions between the functional groups of DC/CFOS NC and AFB1 were the dominant adsorption pathways. Besides, DC/CFOS exhibited negligible impacts on the nutritional quality of the oil after the removal process and storage. Thus, DC/CFOS NC showed sufficient efficacy and safety in the removal of AFB1 from contaminated edible oil.

2-Pyridinecarboxaldehyde-Modified Chitosan-Silver Complexes: Optimized Preparation, Characterization, and Antibacterial Activity

The widespread prevalence of infectious bacteria is one of the greatest threats to public health, and consequently, there is an urgent need for efficient and broad-spectrum antibacterial materials that are antibiotic-free. In this study, 2-pyridinecarboxaldehyde (PCA) was grafted onto chitosan (CS) and the modified CS coordinated with silver ions to prepare PCA-CS-Ag complexes with antibacterial activity. To obtain complexes with a high silver content, the preparation process was optimized using single-factor experiments and response surface methodology. Under the optimal preparation conditions (an additional amount of silver nitrate (58 mg), a solution pH of 3.9, and a reaction temperature of 69 °C), the silver content of the PCA-CS-Ag complex reached 13.27 mg/g. The structure of the PCA-CS-Ag complex was subsequently verified using ultraviolet-visible spectroscopy, Fourier-transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, and thermogravimetric analysis. Furthermore, three possible complexation modes of the PCA-CS-Ag complex were proposed using molecular mechanics calculations. The results of the antibacterial assay in vitro showed that the PCA-CS-Ag complex exhibited strong antibacterial activity against both Gram-positive and Gram-negative bacteria, exerting the synergistic antibacterial effect of modified chitosan and silver ions. Therefore, the PCA-CS-Ag complex is expected to be developed as an effective antibacterial material with promising applications in food films, packaging, medical dressings, and other fields.

Enhanced PMS/O2 activation by self-crosslinked amine-gluteraldehyde/chitosan-Cu biocomposites for efficient degradation of HEPES as biological pollutants and selective allylic oxidation of cyclohexene

Optimization and mechanism elucidation of the catalytic degradation of HEPES and selective aerobic oxidation of cyclohexene by Cu@cross-linked magnetic chitosan.

A resonance Rayleigh scattering method for sensitive detection of chitosan based on supramolecular complex and mechanism study

A convenient and sensitive resonance Rayleigh scattering (RRS) method for the detection of chitosan (CTS) has been developed via forming Cu-Zn supramolecular complex by complexation reaction, hydrophobic force and electrostatic attraction. The microstructure of the complex was characterized by FT-IR, zeta potential, scanning electron microscope (SEM), UV-vis and RRS. Furthermore, the interaction mechanism among Cu(II), Zn(II), CTS and sodium dodecyl benzene sulfonate (SDBS) was studied. The results revealed that CTS and Cu(II) or Zn(II) formed a supramolecular complex with RRS enhancement in weak acid condition. In the presence of SDBS, the RRS intensity of CTS-Cu(II)-SDBS or CTS-Zn(II)-SDBS was significantly higher than that of the binary system without SDBS at the same CTS concentration. The RRS intensity of CTS-Cu(II)-Zn(II)-SDBS was higher than that of CTS-Cu(II)-SDBS and CTS-Zn(II)-SDBS. The RRS intensity increased linearly with the increase of CTS concentration made it possible to determine CTS quantitatively. In the range extending from 0.10 to 5.00 μg/mL, the equation of linear regression was ΔI=1848.8c-138.3 with a correlation coefficient 0.9996, and the detection limit was estimated to be 37.96 ng/mL. The study was successfully applied for the determination of CTS in health food samples, suggesting its great potential toward CTS analysis.

The adsorption mechanism of CF4 on the surface of activated carbon made from peat and modified by Cu

In order to find a way to deal with CF₄ with good removal effect and easy to promote. In this study, peat was used as raw material, and copper-loaded activated carbon (Cu/AC) was successfully prepared through nitric acid oxidation and copper chloride impregnation. Compared with commercial activated carbon and widely used metal organic frameworks (MOFs), it shows a fast adsorption rate and larger adsorption capacity for CF₄. The static experiment was used to study the influence of Cu/AC on the adsorption of CF₄ in the adsorbent dosage, reaction time, temperature, and initial concentration. SEM, FTIR, XPS, XRF, and BET were used to study the changes of physical and chemical properties before and after the adsorption. It was found that the oxygen-containing group was consumed during this process. Unsaturated sites on Cu can accelerate the adsorption of CF₄, and the adsorption process is reversible. For the first time, the kinetic model, adsorption isotherm, and thermodynamic model are used to analyze the adsorption mechanism of CF₄ on the Cu/AC surface from different angles. The results show that the adsorption of CF₄ on the Cu/AC surface is a process of exothermic entropy reduction. The static adsorption process conforms to the pseudo-first-order, the pseudo-second-order, and the Freundlish adsorption model. Through 5 adsorption and desorption processes, it is found that Cu/AC has excellent recycling and recyclability performance.

Selective adsorption and fluorescence sensing of tetracycline by Zn-mediated chitosan non-woven fabric

Nowadays, numerous studies have focused on the newly developed technologies for the thorough removal of tetracyclines (TCs). The efficient removal of trace-amount pollutants requires the development of improved materials with higher adsorption capacity and increased adsorption selectivity. Zn(II)-mediated chitosan nonwoven fabric (Zn-CSNW) adsorbent with coordination capability was explored for the effective and selective removal of TC. The adsorption of TC to Zn-CSNW could reach equilibrium in about 30 min with a maximum adsorption capacity of 195.9 mg/g. It exhibited high anti-interference performance for TC adsorption at low concentrations, with good regeneration and effective reuse. Except for citrate, organic materials similar in structure to TC or common ions in aqueous solutions did not show obvious competition for the adsorption of low concentrations of TC. Additionally, the inherent fluorescence of chitosan and the fluorescence sensitization effect of Zn²⁺ for TC enabled function of Zn-CSNW as an indicator of the adsorption of TC by changes in fluorescence color and intensity under UV light (365 nm). It can indicate the saturation state of the Zn-CSNW, which will bring convenience to the use of the adsorbent. The Zn(II)-mediated coordination interaction plays a vital role in both the selective recognition of TC and the fluorescence sensing of adsorption amount, demonstrating an affordable and effective strategy for the treatment of water containing low amounts of antibiotics.

Synthesis and Efficacy of the N-carbamoyl-methionine Copper on the Growth Performance, Tissue Mineralization, Immunity, and Enzymatic Antioxidant Capacity of Nile tilapia (Oreochromis niloticus)

Immunogenic, methionine copper-induced response had proven to be precedent in providing resistance against certain diseases in fish. This study allocates the fitness strategy for Oreochromis niloticus by introducing and incorporating the well-designed, stabilized, and biocompatible N-carbamoyl-methionine copper (NCM-Cu) as a Cu potent source in diet that enhances the bioavailability and fitness. The synchronized NCM-Cu complex was characterized by directing ultraviolet and visible spectrophotometry (UV-vis), Fourier-transform infrared (FTIR), X-ray diffractometry (XRD), thermogravimetric analysis (TGA), and single-crystal X-ray diffraction. Results revealed blue columnar crystalline, NCM-Cu complex with an empirical formula as C₁₂H₃₀CuN₄O₁₀S₂. Anonymously, the overall growth performance of the fish remained unaltered with NCM-Cu adjunct feed. NCM-Cu significantly raised the Cu accumulation in the fish muscles, liver, gill, and intestine in contrast to the basic Cu-rich feed. The serum antioxidant enzyme activity elevated up to (ceruloplasmin: 19.38 U/L) and the lowest liver malondialdehyde (MDA) content (8.81 nmol/mg prot.) and triglyceride content (0.39 nmol/g prot.) were observed in the NCM-Cu group as compared to the basic Cu and CuSO₄ groups, suggesting that NCM-Cu promoted antioxidative responses and alleviated lipid peroxidation of O. niloticus. Overweening, the synthesized complex, NCM-Cu significantly regulated the expression levels of lysozyme, immunoglobulin M, complement 4, and complement 3 up to 10.93 U/mL, 0.72, 0.77, and 1.18 mg/mL in serum, respectively. Thus, such endorsed results reveal the preeminence of NCM-Cu-supplemented diet for the fitness in O. niloticus.

Enhanced Selenate Removal in Aqueous Phase by Copper-Coated Activated Carbon

In this study, we prepared a novel sorbent derived from precipitating copper ion onto the surfaces of activated carbon (Cu-AC). The sorbents were comprehensively characterized by Brunauer–Emmett–Teller (BET), zeta potential analysis, SEM, XRD, and FTIR. Batch experiments were conducted to evaluate selenate removal by Cu-AC under different conditions. The results showed that Cu was uniformly coated on the AC surface. Copper pretreatment markedly decreased the specific surface area and total pore volume of AC, and changed its surface zeta potential from highly negative to low negative and even positive. The Cu-AC substantially improved selenate adsorption capacity from the 1.36 mg Se/g AC of raw AC to 3.32, 3.56, 4.23, and 4.48 mg Se/g AC after loading of 0.1, 0.5, 1.0, and 5 mmol Cu/g AC, respectively. The results of toxicity leaching test showed AC coated with ≤1.0 mmol Cu/g was acceptable for potential application. Selenate adsorption was significantly inhibited by high ionic strength (>50 mM NaCl) and pH (>10). The electrostatic attraction between positive surface charge of Cu-AC and selenate ions and hydrogen bonding between CuO and HSeO₄⁻ might contribute to selenate sorption. Evidence showed that the selenate adsorption might involve outer-sphere surface complexation. The adsorption data appeared to be better described by Langmuir than Freundlich isotherm. The spent adsorbent could be effectively regenerated by hydroxide for reuse. Only a little decrease of removal efficiency was observed in the second and third run. This study implies that Cu-coated AC is a potential adsorbent for sustainable removal selenate from relative low salinity water/wastewater.