Potential of amino-riched nano-structured MnFe2O4@cellulose for biosorption of toxic Cr (VI): Modeling, kinetic, equilibrium and comparing studies

Synthesis, characterization, and phosphorus adsorption of Mg/Fe-modified biochar from cotton stalk pretreated with Coriolus versicolor

In recent years, the research potential in utilizing biochars as adsorbents in adsorption processes has grown due to their eco-friendly and economical nature. However, biochar often possesses a negative surface charge that limits its affinity for binding anions. Nitric acid washing and pretreatment with Coriolus versicolor can break down the lignocellulosic structure in cotton stalk waste, facilitating the subsequent impregnation of Mg and Fe metal oxides. These pretreatment steps can lead to the production of diverse and functionalized biochars with higher adsorption capacities. In this study, cotton stalk waste was first washed with diluted nitric acid and then subjected to biological pretreatment by incubation with C. versicolor, followed by impregnation with Mg and Fe to obtain CV-CS/Fe and CV-CS/Mg biochars. The results showed that the applied pretreatments altered the physicochemical properties and significantly increased the phosphorus adsorption capacity. The adsorption capacities of CV-CS/Fe and CV-CS/Mg biochars were found to be 277.88 and 507.01 mg g-1, respectively. The results indicate that the incorporation of multiple metal oxide impregnates enhances P adsorption. Furthermore, in the kinetic study, pseudo-first-order and pseudo-second-order models provided a well fit, determining chemical adsorption as the main adsorption mechanism for phosphorus adsorption. The biochars demonstrated compatibility with Langmuir-Freundlich models. Overall, the findings suggest the possibility of synthesizing biochars with improved adsorptive properties through pretreatment, and these engineered biochars hold promising potential as effective adsorbents in the field. PRACTITIONER POINTS: Eco-friendly, natural, and economical biochar was synthesized. Biochar was produced via Coriolus versicolor pretreatment. High adsorption capacities of CV-PS/Mg biochars were found to be 507.01 mg g-1. Adsorption capacities of biochars can be improved by pretreatment.

Dansyl-labelled cellulose as dual-functional adsorbents for elimination and detection of mercury in aqueous solution via aggregation-induced emission

Dansyl chloride fluorophore exhibits typical aggregation induced fluorescence emission behavior in acetone/water solution. To realize the integration of detective and adsorptive functions, dansyl chloride is covalently immobilized on cellulose substrate to fabricate an efficient adsorbent for mercury ions in water. The as-prepared material exhibits excellent fluorescence sensing performance exclusively for Hg (II) with the presence of other metal ions. A sensitive and selective fluorescence quenching across the concentration range of 0.1-8.0 mg/L is observed with a detection limit of 8.33 × 10^-9 M as a result of the inhibition of aggregation induced emission caused by the coordination between adsorbent and Hg (II). Besides, the adsorption properties for Hg (II) including the influence of initial concentration and contact time are investigated. Langmuir model and pseudo-second-order kinetics are demonstrated to fit well with the adsorption experiment for the uptake of Hg (II) by the functionalized adsorbent, also, intraparticle diffusion kinetic model is proved to aptly describe the Hg (II) removal in aqueous solution. In addition, the recognition mechanism is considered to originate from the Hg (II) triggered structural reversals of naphthalene ring units which are verified by the X-ray photoelectron spectroscopy and density functional theory calculation. Moreover, the synthesis method used in this work also provides a strategy for the sensing application of organic sensor molecules with AIE properties in which the aggregated behavior could be appropriately realized.

Adsorptive performance and mechanism exploration of l-lysine functionalized celluloses for enhanced removal of Pb(II) from aqueous medium

In this study, two novel biosorbents of l-lysine grafted cellulose (L-PCM, L-TCF) were prepared for Pb(II) removal from aqueous solutions. Various adsorption parameters were surveyed, such as adsorbent dosages, initial concentration of Pb(II), temperature and pH, using adsorption techniques. At normal temperature, less adsorbent can achieve better adsorption capacity (89.71 ± 0.27 mg g^-1 with 0.5 g L^-1 of L-PCM, 16.84 ± 0.02 mg g^-1 with 3.0 g L^-1 of L-TCF). The pH range of application for L-PCM was 4-12 and that of L-TCF was 4-13. The adsorption of Pb(II) by biosorbents went through the boundary layer diffusion stage and void diffusion stage. The adsorption mechanism was chemisorption based on multilayer heterogeneous adsorption. The pseudo-second-order model fitted the adsorption kinetics perfectly. The Freundlich isotherm model adequately described Multimolecular equilibrium relationship between Pb(II) and biosorbents; the predicted maximum adsorption capacities of the two adsorbents were 904.12 and 46.74 mg g^-1, respectively. The results showed that the adsorption mechanism was the electrostatic attraction between Pb(II) and -COOH and the complexation between Pb(II) and -NH₂. This work demonstrated that l-lysine modified cellulose-based biosorbents have great potential in the field of Pb(II) removal from aqueous solutions.

Preparation and modification of nanocellulose and its application to heavy metal adsorption: A review

Heavy metals are a notable pollutant in aquatic ecosystems that results in many deadly diseases of the human body after enrichment through the food chain. As an environmentally friendly renewable resource, nanocellulose can be competitive with other materials at removing heavy metal ions due to its large specific surface area, high mechanical strength, biocompatibility and low cost. In this review, the research status of modified nanocellulose for heavy metal adsorbents is primarily reviewed. Two primary forms of nanocellulose are cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs). The preparation process of nanocellulose was derived from natural plants, and the preparation process included noncellulosic constituent removal and extraction of nanocellulose. Focusing on heavy metal adsorption, the modification of nanocellulose was explored in depth, including direct modification methods, surface grafting modification methods based on free radical polymerization and physical activation. The adsorption principles of nanocellulose-based adsorbents when removing heavy metals are analyzed in detail. This review may further facilitate the application of the modified nanocellulose in the field of heavy metal removal.

Insights into the correlation between different adsorption/oxidation/catalytic performance and physiochemical characteristics of Fe-Mn oxide-based composites

Fe-Mn oxide-based composites have been widely used in the solidification of heavy metals or the removal of organic pollutants, which can not only show excellent adsorption/oxidation performance, but also show catalytic activity for common oxidants. At present, the correlation between adsorption/oxidation/catalytic performance and physicochemical characteristics of these composites, and the underlying mechanisms are still unclear. Therefore, the main purpose of this review is to disclose the internal relationship between the physicochemical properties of Fe-Mn oxide-based composites and the pollutant removal performance. From the perspective of crystal phase, the basic units of Fe-Mn oxide composites are divided into Fe-Mn binary oxide (FMBO) and spinel MnFe₂O₄, and the two species were discussed separately in most chapters. The selected physicochemical properties mainly include the type of Fe-Mn oxide composites, surface-to-volume ratio, pore volume, pH_pzc, crystal type, surface functional groups. Because the physicochemical properties that determine how effective Fe-Mn oxide material is at removing contaminants may differ as it performs different functions, we discussed the above problems under different application scenarios (adsorption, oxidation, and advanced oxidation process). Additionally, internal factor (Fe/Mn mole ratio) and external factors (pH_ini, co-ions and ionic strength) were analyzed, and several common synthetic strategies of these composites were presented.

Preparation and Characterization of an Electrospun Whey Protein/Polycaprolactone Nanofiber Membrane for Chromium Removal from Water

Chromium pollution represents a worldwide concern due to its high toxicity and bioaccumulation in organisms and ecosystems. An interesting material to remove metal ions from water is a whey-protein-based material elaborated by electrospinning, which is an emerging method to produce adsorbent membranes with diverse applications. The aim of this study was to prepare an adsorbent membrane of whey protein isolate (WPI) and polycaprolactone (PCL) by electrospinning to remove chromium ions from water. The adsorbent membrane was synthesized by a central composed design denaturing WPI using 2-Mercaptoethanol and mixing it with PCL to produce electrospun nanofibers. The adsorbent membrane was characterized by denaturation, Scanning Electron Microscope, Fourier-Transform Infrared Spectroscopy, Contact Angle, Thermogravimetric Analysis, and X-ray Photoelectron Spectrometry. The adsorption properties of this membrane were assessed in the removal of chromium. The removal performance of the membrane was enhanced by an increase in temperature showing an endothermic adsorption process. The adsorption process of chromium ions onto the nanofiber membrane followed the Sips adsorption isotherm, while the adsorption kinetics followed a pseudo-second kinetics where the maximum adsorption capacity was 31.0 mg/g at 30 °C and pH 2. This work provides a novel method to fabricate a hybrid membrane with amyloid-type fibrils of WPI and PCL, which is a promising adsorbent to remove heavy metal ions from water.

Facile fabrication of amino-functionalized MIL-68(Al) metal-organic framework for effective adsorption of arsenate (As(V))

An amino-functionalized MIL-68(Al) metal–organic framework (amino-MIL-68(Al) MOF) was synthesized by solvothermal method and then characterized by FESEM, XRD, FTIR, EDX-mapping, and BET-BJH techniques. In order to predict arsenate (As(V)) removal, a robust quadratic model (R² > 0.99, F-value = 2389.17 and p value < 0.0001) was developed by the central composite design (CCD) method and then the genetic algorithm (GA) was utilized to optimize the system response and four independent variables. The results showed that As(V) adsorption on MOF was affected by solution pH, adsorbent dose, As(V) concentration and reaction time, respectively. Predicted and experimental As(V) removal efficiencies under optimal conditions were 99.45 and 99.87%, respectively. The fitting of experimental data showed that As(V) adsorption on MOF is well described by the nonlinear form of the Langmuir isotherm and pseudo-second-order kinetic. At optimum pH 3, the maximum As(V) adsorption capacity was 74.29 mg/g. Thermodynamic studies in the temperature range of 25 to 50 °C showed that As(V) adsorption is a spontaneous endothermic process. The reusability of MOF in ten adsorption/regeneration cycles was studied and the results showed high reusability of this adsorbent. The highest interventional effect in inhibiting As(V) adsorption was related to phosphate anion. The results of this study showed that amino-MIL-68(Al) can be used as an effective MOF with a high surface area (> 1000 m²/g) and high reusability for As(V)-contaminated water.

Adsorption behaviors of strategic W/Mo/Re from wastewaters by novel magnetic ferrite nanoparticles: Adsorption mechanism underlying selective separation

Purification and recovery of strategic W/Mo/Re from wastewaters face a dual concern for resource recovery and environmental pollution. In this work, a novel manganese ferrite nanoparticles (MFO-NPs) was prepared from the low-grade manganese ore via pyrometallurgical transformation followed by nano sanding. The effects of pH, initial concentration, and reaction time on adsorption behaviors of simplex and mixed W/Mo/Re by MFO-NPs were investigated. Single anion adsorption indicated that molybdate and tungstate adsorption were consistent with the Langmuir isotherm model with the highest adsorption capacities of 41.985 mg/g and 85.61 mg/g, respectively; whereas rhenate was not adsorped. Selective separation indicated that W was firstly separated by MFO-NPs adsorption at pH of 5. After that, Mo was further adsorped by MFO-NPs at pH of 2-4 while Re was kept in the raffinate. The possible selective adsorption mechanism was based on the difference of electrostatic adsorption, polar adsorption, and complexing reaction between MFO-NPs and W/Mo/Re anions, which had various ionic forms under different pH values. Compared with the MFO-NPs prepared by wet chemistry methods, the novel MFO-NPs proposed in this work not only showed satisfactory adsorption capacity but had huge potential for the selective separation of W, Mo, and Re.

Primary biosorption mechanism of lead (II) and cadmium (II) cations from aqueous solution by pomelo (Citrus maxima) fruit peels

The present work investigates the primary adsorption mechanisms of lead (II) and cadmium (II) cations onto pomelo fruit peel (PFP) from aqueous solution. pH, adsorption time, ion strength, and initial metal cation concentrations, which are factors affecting the uptake of these cations, are investigated. Results show that pH and ion strengths strongly affect the removal of these cations from aqueous solution. Different isotherm adsorption models, such as Langmuir, Freundlich, and Sips, are utilized to fit the experimental data in order to determine the adsorption in nature. The Langmuir monolayer adsorption capacities are found to be 47.18 mg/g for lead (II) and 13.35 mg/g for cadmium (II). Kinetic and thermodynamic studies based on a combination of FT-IR and TG-DSC spectroscopies demonstrate that electrostatic attraction plays a primary adsorption mechanism of lead (II) and cadmium (II) cations onto pomelo fruit peel.

Advances in nanocellulose-based materials as adsorbents of heavy metals and dyes

In recent years, nanocellulose-based materials have been increasingly applied as a lot of biosorbents for the treatment of water pollutants due to their large specific surface area, easy modification, environmental friendliness, and reproducibility. In this review, surface modification of nanocellulose-based adsorbents with various effective adsorption groups is described, as well as polymer grafting and hybrid composite fabrication. The adsorption mechanisms involved in the adsorption process of pollutants by adsorbents are further analysed and summarized. The regeneration methods of nanocellulose adsorbents with different adsorption mechanisms are also demonstrated. In addition, this paper also briefly describes the forms of nanocellulose-based adsorbents with large-scale application including membranes, gels, flocculants and magnetic composites.

Application of polysaccharide biopolymers as natural adsorbent in sample preparation

Preparing samples for analyses is perhaps the most important part to analyses. The varied functional groups present on the surface of biopolymers bestow them appropriate adsorption properties. Properties like biocompatibility, biodegradability, presence of different surface functional group, high porosity, considerable absorption capacity for water, the potential for modification, etc. turn biopolymers to promising candidates for varied applications. In addition, one of the most important parts of determination of an analyte in a matrix is sample preparation step and the efficiency of this step in solid phase extraction methods is largely dependent on the type of adsorbent used. Due to the unique properties of biopolymers they are considered an appropriate choice for using as sorbent in sample preparation methods that use from a solid adsorbent. Many review articles have been published on the application of diverse adsorbents in sample preparation methods, however despite the numerous advantages of biopolymers mentioned; review articles in this field are very few. Thus, in this paper we review the reports in different areas of sample preparation that use polysaccharides-based biopolymers as sorbents for extraction and determination of diverse organic and inorganic analytes.

Preparation and Characterization of Functionalized Cellulose Nanomaterials (CNMs) for Pb(II) Ions Removal from Wastewater

Due to their remarkable properties, cellulose nanomaterials are emerging materials for wastewater (WW) treatment. In this study, both pristine cellulose nanomaterial (CNM) and sodium periodate modified cellulose nanomaterial (NaIO4-CNM) were prepared from the stem of the Erythrina brucei plant for the removal of Pb(II) ions from WW. As-prepared CNMs were characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), scanning electron microscope (SEM), and thermogravimetric analysis with differential thermogravimetry (TGA-DTG) analysis. The as-prepared and characterized CNMs were tested for the removal of Pb(II) ions from secondary run-off wastewater (SERWW). Langmuir and Freundlich adsorption isotherms were certainly fixed to a maximum Pb(II) ions uptake capability (Qmax) of 91.74 and 384.62 mg g−1 by CNM and NaIO4-CNM adsorbents, respectively. The pseudo-second-order (PSO) kinetics model was well fitted to the uptake process. Results revealed that the percentage removal (%R) of Pb(II) ions was decreased by the presence of nitrogen and organic matter, but not affected by the presence of phosphorous in SERWW. Due to its high efficiency, NaIO4-CNM was selected for the regeneration study. The regeneration study was conducted after desorption of Pb(II) ions from the adsorbent by the addition of HCl, and the regenerated sorbent was reused as an adsorbent for at least 13 successive cycles. The results indicated excellent recycling capabilities, and the adsorbent was used as adsorbing material for the removal of Pb(II) ions from SERWW after 13 successive cycles without significant efficient loss.

Modelling and optimization of factors influencing adsorptive performance of agrowaste-derived Nanocellulose Iron Oxide Nanobiocomposites during remediation of Arsenic contaminated groundwater

Nanocellulose Iron Oxide Nanobiocomposites (NIONs) were synthesized from rice husk and sugarcane bagasse derived nanocelluloses for adsorptive removal of arsenic and associated contaminants present in groundwater samples. These NIONSs were superparamagnetic, hence magnetically recoverable and demonstrated promising recyclability. Synthesis of NIONs was confirmed by Transmission electron microscopy (TEM), X-Ray Diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopic (XPS). FTIR and XPS data together with adsorption kinetics provide insights into probable adsorption mechanism of Arsenic by NIONs. The experimental conditions for 10 different variants were modelled using response surface methodology (RSM) based on central composite design (CCD), considering the parameters; adsorbate dosage, adsorbent dosage, pH and contact time. The results identified the best performing variants and the optimal conditions for maximal absorption (~99%). These results were validated using a three-layer feed-forward Multilayer Perceptron (MLP) based Artificial Neural Network (ANN) model. Both RSM and ANN chemometric models were in close conformity for optimized conditions of highest adsorption by specific variants. The standardized conditions were used to expand the study to field-based arsenic contaminated groundwater samples and their performance to commercial adsorbents. NIONs show promising commercial potential for water remediation applications due to their high adsorptive performance, magnetic recoverability and recyclability.

Preparation of a Hybrid Membrane from Whey Protein Fibrils and Activated Carbon to Remove Mercury and Chromium from Water

Water contamination by mercury and chromium has a direct effect in human health. A promising technology to remove heavy metals by membrane filtration is the use of hybrid membranes produced with whey protein fibrils (WPF) and activated carbon (AC). In this study, the best conditions to produce WPF by heat treatment were determined to maximize the removal of mercury and chromium from water using a central composed design. The results indicated that the best conditions to prepare WPF were 74 °C, 7 h and 3.8% of whey protein with adsorption capacities of 25 and 18 mg/g and removal efficiencies of 81 and 57% for mercury and chromium, respectively. WPF and AC were used to prepare a hybrid membrane that was characterized using transmission electron microscopy, atomic force microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy and Brunauer-Emmett-Teller surface area measurements. Batch filtration experiments were performed with the hybrid membrane for chromium and mercury removal at 25, 50 and 100 mg/L to determine its adsorption capacities. A high performance of the hybrid membrane was demonstrated removing efficiently mercury and chromium from water, thus supporting more than ten filtration cycles.

Chitosan-MnO2 nanocomposite for effective removal of Cr (VI) from aqueous solution

In this report, the adsorption of Cr(VI) onto MnO₂/CS nanocomposite material from aqueous solution is investigated. All the factors, which affect the adsorption, such as pH, adsorption time, Cr(VI) initial concentration and adsorbent dosage, are also examined. The results obtained show that the Cr(VI) uptake is strongly affected by pH and ion strength. Analysis within the nonlinear isotherm models indicates that the Sips isotherm combining with the Langmuir and Freundlich models offer the best fit to the experimental data due to the obtained highest R² and smallest RMSE and χ² values. The calculated Langmuir monolayer adsorption capacity is 61.56 mg g^-1 at pH of 2.0 and adsorption time of 120 min. Moreover, the mechanism studies by combining theoretical models with analytical spectroscopies reveal that the electrostatic attraction plays the important role to the uptake of Cr(VI) onto MnO₂/CS nanocomposite. Therefore, the present nanocomposite material can be applied to remove total Cr from wastewater produced by the galvanized manufacturing factory with a relatively high efficiency.

Poly(acryloyl hydrazide)-grafted cellulose nanocrystal adsorbents with an excellent Cr(VI) adsorption capacity

In this study, we prepared poly(acryloyl hydrazide) (PAH)-grafted cellulose nanocrystal (CNC-PAH) particles via the atom transfer radical polymerization method for application to Cr(VI) adsorption. The closely-packed PAH chains grafted on the cellulose nanocrystal (CNC) surface provide a high density of amine groups that can adsorb Cr(VI) through strong electrostatic, hydrogen bonding and chelating interactions. CNC-PAH exhibited the optimum Cr(VI) adsorption capacity at the solution pH = 3, where its electrostatic attraction with Cr(VI) was maximized. Cr(VI) was chemisorbed in CNC-PAH by following the Langmuir isotherm mechanism (homogeneous monolayer adsorption). The Cr(VI) adsorption kinetics of CNC-PAH was controlled predominantly by intra-particle diffusion resistance imparted by the PAH shell layer. Thermodynamic analysis revealed that Cr(VI) adsorption of CNC-PAH is a spontaneous and endothermic process. Importantly, CNC-PAH grafted with the higher M_w (∼50 kg mol^-1) PAH exhibited a rapid Cr(VI) adsorption rate and remarkably high Cr(VI) adsorption capacity (∼457.6 mg g^-1 at 298.15 K), exceeding those of previously reported adsorbents owing to its numerous Cr(VI)-adsorptive amine groups provided by the closely-packed grafted PAH polymers. Furthermore, CNC-PAH showed excellent reusability to maintain its high adsorption ability during repeated adsorption-desorption cycles owing to the covalently binding nature of the PAH polymers.

Nanocellulose-based composites for the removal of contaminants from wastewater

Polymers derived from plant and animal sources are of great interest in wastewater remediation due to their cost-effectiveness and renewable adsorption capabilities, one such polymer is nanocellulose (NC). NC has gained a lot of attention in various research fields due to its abundance in nature, nano-dimension, high surface area, stability and bio-compatibility. As a result, NC has emerged as a great potential adsorbent for the removal of contaminants such as heavy metals, organic dyes, oils, pharmaceutical and etc. in the environmental remediation. This review focuses on the description of the building blocks, structure, properties, isolation and also discusses the potential of nanocellulose based composites materials with reinforcements such as activated carbon, carbon nanotube, graphene oxides, metals, non-metals and ceramics that were effectively used as an adsorbents for diverse organic and inorganic contaminants in water.

Novel synthesis of Ni/Fe layered double hydroxides using urea and glycerol and their enhanced adsorption behavior for Cr(VI) removal

Novel modified Ni/Fe layered double hydroxides with different morphology of spherical - like shape were fabricated via using urea as a ligand and glycerol (Ni/Fe LDH/GL) with Ni:Fe molar ratios of 2:1 by the simplest co -precipitation method. Also, for comparison purposes, Ni/Fe LDH was synthesized to be used as a control one. A suggested interpretation for the morphology change was also given. The materials were characterized by X-ray diffraction (XRD), The Fourier transform infrared (FT - IR) spectroscopy, field emission scanning electron microscopy (FESEM), EDX for elemental analysis, high resolution transmission electron microscopy (HRTEM), Brunauer, Emmett, and Teller (BET) equation, particle size distributions and Zeta potential measurements. In addition, the synthesized materials were used as adsorbents for removal of potassium dichromate from aqueous solutions under various experimental conditions. The adsorption of Cr (VI) was strongly pH dependant and the pH_PZC was studied. Kinetic studies were evaluated through different models including, pseudo first and second orders, mixed 1, 2 orders, intra particle diffusion and Avrami models. For adsorption isotherms, two-parameter models (Langmuir, Freundlich and Temkin) and three parameter models (Sips, Langmuir-Freundlich and Tooth) were investigated showing maximum adsorption capacity of 50.43 mg/g and 136.05 mg/g for Ni/Fe LDH and Ni/Fe LDH/GL, respectively. Also, the effect of temperature was investigated at (23, 35, 45, 55 °C) and the thermodynamic parameters (∆H°, ∆S° and ∆G°) were calculated showing exothermic and spontaneous adsorption process. The effect of coexisting anions (Cl^-, SO₄^2- and HPO₄^2-) and humic acid at different concentrations on the removal efficiency of dichromate ions was investigated. Chemical stability and recyclability of these adsorbents were also studied. The intermolecular hydrogen bonds formation between dichromate ion, urea, glycerol, LDH was explored by Monte Carlo simulation This study suggested that the modified Ni/Fe LDH/GL materials were promising nanoadsorbents for efficient potassium dichromate removal.

Photocatalytic degradation of ketoconazole by Z-scheme Ag3PO4/graphene oxide: response surface modeling and optimization

Ketoconazole is an imidazole fungicide which is commonly used as pharmaceutical and healthcare products. Residual amount of this compound can cause adverse ecological health problems. The present study investigated ketoconazole photocatalytic degradation using Ag₃PO₄/graphene oxide (GO). Ag₃PO₄/GO and Ag₃PO₄ as visible light-driven photocatalysts was synthesized using the in situ growth method. Degradation of ketoconazole at the concentration of 1-20 mg/L in aqueous solutions was optimized in the presence of Ag₃PO₄/GO nanocomposite with the dosage of 0.5-2 g/L, contact time of 15-20 min, and pH of 5-9 using response surface methodology. A second-order model was selected as the best fitted model with R² value and lack of fit as 0.935 and 0.06, respectively. Under the optimized conditions, the Ag₃PO₄/GO catalyst achieved a photocatalytic efficiency of 96.53% after 93.34 min. The photocatalytic activity, reaction kinetics, and stability were also investigated. The results indicated that the Ag₃PO₄/GO nanocomposite exhibited higher photocatalytic activity for ketoconazole degradation, which was 2.4 times that of pure Ag₃PO₄. Finally, a direct Z-scheme mechanism was found to be responsible for enhanced photocatalytic activity in the Ag₃PO₄/GO nanocomposite. The high photocatalytic activity, acceptable reusability, and good aqueous stability make the Ag₃PO₄/GO nanocomposite a promising nanophotocatalyst for photocatalytic degradation of azoles contaminants.

Photochemical degradation of toluene in gas-phase under UV/visible light graphene oxide-TiO2 nanocomposite: influential operating factors, optimization, and modeling

The current study aimed to investigate the removal efficiency of toluene using synthesized titanium dioxide-graphene oxide composites under visible light and UV irradiation. The characterization of synthesized composites was examined by field emission scanning electron microscope equipped with energy dispersive, X-ray diffraction and fourier transforms infrared. In order to find the optimum of the main experimental parameters affecting the removal efficiency of toluene including the length of the reactor, initial concentration, and flow rates, central composite design together with response surface methodology with R software was used. The initial concentration of toluene in the inlet of the reactor as well as its concentration in the outlet was measured using gas chromatography with the flame ionization detector. Analysis of variance results for the quadratic model showed that the highly significant and simple linear regression was established as a predicting model. Multiple and adjusted R² were 0.965 and 0.974 for UV irradiation GO-TiO₂ model and 0.951 and 0.959 for visible light GO-TiO₂ model, respectively. As such, the differences less than 0.2 between multiple and adjusted R² in two models indicate that two examined models were fitted well. The highest removal efficiency of toluene using UV irradiation GO-TiO₂ and visible light GO-TiO₂ was obtained at optimum condition; length of reactor 40 cm, initial concentration of 0.1 ppm, and flow rate equal to 1 l min^-1, with 97.7 and 77.2%, respectively. The results indicated that the removal efficiency of toluene increased considerably with rising the length of the reactor, decreasing flow rates, and initial concentration.