Green carboxymethyl cellulose-silver complex versus cellulose origins in biological activity applications

Antibacterial Activity of Green Synthesized Silver Nanoparticles Using Lawsonia inermis Against Common Pathogens from Urinary Tract Infection

New and creative methodologies for the fabrication of silver nanoparticles (Ag-NPs), which are exploited in a wide range of consumer items, are of significant interest. Hence, this research emphasizes the biological approach of Ag-NPs through Egyptian henna leaves (Lawsonia inermis Linn.) extracts and analysis of the prepared Ag-NPs. Plant extract components were identified by gas chromatography mass spectrometry (GC-mass). The analyses of prepared Ag-NPs were carried out through UV-visible (UV-Vis), X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), and Fourier transform infrared (FTIR) analysis. UV-Vis reveals that Ag-NPs have a maximum peak at 460 nm in visible light. Structural characterization recorded peaks that corresponded to Bragg's diffractions for silver nano-crystal, with average crystallite sizes varying from 28 to 60 nm. Antibacterial activities of Ag-NPs were examined, and it is observed that all microorganisms are very sensitive to biologically synthesized Ag-NPs.

Crosslinked carboxymethyl cellulose colloidal solution for cotton thread coating in wound dressing: A rheological study

Cotton thread therapeutic properties as a wound dressing can be enhanced by utilising carboxymethyl cellulose-nanoparticles (CMC/NPs) colloidal solution as a coating solution. Nanoparticles such as graphene oxide (GO), graphene quantum dots (GQD), and silver nanoparticles (AgNP) stability in CMC was investigated through the rheological analysis and UV-Vis spectroscopy of the colloidal solutions. Citric acid (CA) acted as a crosslinker and was utilised to crosslink the colloidal solution with cotton thread. These CMC/NPs coated threads were subjected to mechanical properties and antibacterial activity analysis. Results obtained indicate less nanoparticle agglomeration and were stable in the CMC-based nanofluid. CMC/NPs rheological study suggested that colloidal solutions exhibited shear thinning behaviour and behaved as non-Newtonian fluids with n < 1. Crosslinked CMC/NPs appeared in a gel-like state as the viscoelasticity of the solution increased. Among the colloidal solutions, CMC/AgNP showed the highest enhancement with a significant difference at p < 0.05 in terms of mechanical and antibacterial properties. Consequently, the rheological properties and stability of CMC/NPs might influence the coating solution's appearance and refine the cotton thread's microstructure for a functional wound dressing to be further utilised as a coating solution for antibacterial cotton thread wound dressing material.

Preparation and activity of sodium carboxymethyl cellulose (CMC-Na) and Metarhizium rileyi ZHKUMR1 composite membrane

Improving the adhesion capability of Metarhizium rileyi ZHKUMR1 on leaves enabled by the combination with Carboxymethyl Cellulose (CMCNa) materials is feasible to improve the utilization rate of Metarhizium rileyi. Herein, the CMC-Na-ZHKUMR1 membrane was prepared by simply mixing Carboxymethyl Cellulose (CMCNa) with Metarhizium rileyi. Through compatibility test, it was found that the inhibition rates of spore germination and mycelial growth of ZHKUMR1 were only 1.51 % and 3.13 % when the concentration of Carboxymethyl Cellulose (CMCNa) was 0.5 %. By adding 2 % of Carboxymethyl Cellulose (CMCNa) under UV irradiation for 30 min, the protective rate of spore germination of ZHKUMR1 was up to ~12.44 %, where the wettability on corn leaves was achieved and the retention of ZHKUMR1 spores on corn leaves was increased. After indoor activity determination, it was found that after 3 min of simulated rain washing, the lethal rate of corn leaves pretreated with CMC-Na-ZHKUMR1 on the 2nd instar larvae of Spodoptera frugiperda was 46.67 %, which was much higher than that of ZHKUMR1 spore suspension alone. This work clearly showed that Carboxymethyl Cellulose (CMCNa) effectively improved the field application effect of Metarhizium rileyi ZHKUMR1, and this strategy provided guidance for improving the field efficacy of Metarhizium rileyi ZHKUMR1.

UV-Vis Sintering Process for Fabrication of Conductive Coatings Based on Ni-Ag Core-Shell Nanoparticles

The UV-Vis sintering process was applied for the fabrication of conductive coatings composed of low-cost nickel-silver (Ni@Ag) nanoparticles (NPs) with core-shell structures. The metallic films were formed on a plastic substrate (polyethylene napthalate, PEN), which required their sintering at low temperatures to prevent the heat-sensitive polymer from destroying them. The UV-Vis sintering method, as a non-invasive method, allowed us to obtain metallic coatings with good conductivity at room temperature. In optimal sintering conditions, i.e., irradiation with a wavelength of 350-400 nm and time of 90 min, conductivity corresponding to about 30% of that of bulk nickel was obtained for the coatings based on Ni@Ag NPs.

Biomass-based single- and double-network hydrogels derived from cellulose microfiber and chitosan for potential application as plant growing substrate

A series of hydrogels were synthesized from renewable and low-cost micro-sized cellulose fiber. The single-network hydrogel was composed of cellulose fiber and a small amount of another polysaccharide, chitosan, which 'glued' individual cellulose fiber pieces together through Schiff-base bonding. The double-network hydrogel was constructed by adding a secondary network, the covalently crosslinked polyacrylamide, into the single-network hydrogel, which was synthesized by conducting Schiff-base reaction and free radical polymerization at the same time in a facile one-pot process. In both single- and double-network hydrogels, cellulose fiber constituted the dominant component. Both types of hydrogels exhibited good swelling properties. The double-network hydrogel showed much improved stability against soaking in water and higher salt tolerance. Germination experiment with choy sum seeds sowed on hydrogel surface showed that the seeds were able to germinate and further develop roots, shoots, and true leaves, demonstrating the potential of the biomass-derived hydrogels for soilless plant growing applications.

A new complex of silver(I) with probenecid: Synthesis, characterization, and studies of antibacterial and extended spectrum β-lactamases (ESBL) inhibition activities

This article describes the in vitro antibacterial and β-lactamase inhibition of a novel silver(I) complex with the sulfonamide probenecid (Ag-PROB). The formula Ag₂C₂₆H₃₆N2O₈S₂·2H₂O for the Ag-PROB complex was proposed based on elemental analysis. High-resolution mass spectrometric studies revealed the existence of the complex in its dimeric form. Infrared, nuclear magnetic resonance spectroscopies and Density Functional Theory calculations indicated a bidentate coordination of probenecid to the silver ions by the oxygen atoms of the carboxylate. In vitro antibacterial activities of Ag-PROB showed significant growth inhibitory activity over Mycobacterium tuberculosis, S. aureus, and P. aeruginosa PA01biofilm-producers, B. cereus, and E. coli. The Ag-PROB complex was active over multi-drug resistant of uropathogenic E. coli extended spectrum β-lactamases (ESBL) producing (EC958 and BR43), enterohemorrhagic E. coli (O157:H7) and enteroaggregative E. coli (O104:H4). Ag-PROB was able to inhibit CTX-M-15 and TEM-1B ESBL classes, at concentrations below the minimum inhibitory concentration for Ag-PROB, in the presence of ampicillin (AMP) concentration in which EC958 and BR43 bacteria were resistant in the absence of Ag-PROB. These results indicate that, in addition to ESBL inhibition, there is a synergistic antibacterial effect between AMP and the Ag-PROB. Molecular docking results revealed potential key residues involved in interactions between Ag-PROB, CTX-M-15 and TEM1B, suggesting the molecular mechanism of the ESBL inhibition. The obtained results added to the absence of mutagenic activity and low cytotoxic activity over non-tumor cell of the Ag-PROB complex open a new perspective for future in vivo tests demonstrating its potential of use as an antibacterial agent.

Synthesis, Characterization, and Bioactivities of Polysaccharide Metal Complexes: A Review

Natural polysaccharides are critical to a wide range of fields (e.g., medicine, food production, and cosmetics) for their various remarkable physical properties and biological activities. However, the bioactivities of naturally acquired polysaccharides may be unsatisfactory and limit their further applications. It is generally known that the chemical structure exhibited by polysaccharides lays the material basis for their biological activities. Accordingly, possible structural modifications should be conducted on polysaccharides for their enhancement. Recently, polysaccharides complexed with metal ions (e.g., Fe, Zn, Mg, Cr, and Pt) have been reported to be possibly used to improve their bioactivities. Moreover, since the properties exhibited by metal ions are normally conserved, polysaccharides may be endowed with new applications. In this review, the synthesis methods, characterization methods, and bioactivities of polysaccharide metal complexes are summarized specifically. Then, the application prospects and limitations of these complexes are analyzed and discussed.

Skin wounds, the healing process, and hydrogel-based wound dressings: a short review

Skin wounds are damage to the epithelial layer and the integrity of living tissue. The healing mechanism is dynamic and complex, and often treatments with wound dressings help in tissue regeneration, reducing the risk of infections. Polymeric hydrogels become good candidates for wet curing process. These materials prevent dehydration of the tissue and avoid discomfort to the patient when changing the dressing. In this short review, we demonstrate the importance of the healing process, the types of skin wounds, and the hydrogels that are potentially attractive as wound dressings.

Starch-Capped AgNPs' as Potential Cytotoxic Agents against Prostate Cancer Cells

One of the major therapeutic approaches of prostate cancer (PC) is androgen deprivation therapy (ADT), but patients develop resistance within 2–3 years, making the development of new therapeutic approaches of great importance. Silver nanoparticles (AgNPs) synthesized through green approaches have been studied as anticancer agents because of their physical-chemical properties. This study explored the cytotoxic capacity of starch-capped AgNPs, synthesized through green methods, in LNCaP and in PC-3 cells, a hormonal-sensitive and hormone-resistant PC cell line, respectively. These AgNPs were synthesized in a microwave pressurized synthesizer and characterized by ultraviolet-visible (UV-Vis) spectroscopy, transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDX). Their cytotoxicity was assessed regarding their ability to alter morphological aspect (optical microscopy), induce damage in cytoplasmic membrane (Trypan Blue Assay), mitochondria (WST-1 assay), cellular proliferation (BrdU assay), and cell cycle (Propidium iodide and flow-cytometry). AgNPs showed surface plasmon resonance (SPR) of approximately 408 nm and average size of 3 nm. The starch-capped AgNPs successfully induced damage in cytoplasmic membrane and mitochondria, at concentrations equal and above 20 ppm. These damages lead to cell cycle arrest in G0/G1 and G2/M, blockage of proliferation and death in LNCaP and PC-3 cells, respectively. This data shows these AgNPs’ potential as anticancer agents for the different stages of PC.

Cytotoxic Effect of Silver Nanoparticles Synthesized by Green Methods in Cancer

Cancer is a major public health problem, but despite the several treatment approaches available, patients develop resistance in short time periods, making overcoming resistance or finding more efficient treatments an imperative challenge. Silver nanoparticles (AgNPs) have been described as an alternative option due to their physicochemical properties. The scope of this review was to systematize the available scientific information concerning these characteristics in AgNPs synthesized according to green chemistry's recommendations as well as their cytotoxicity in different cancer models. This is the first paper analyzing, correlating, and summarizing AgNPs' main parameters that modulate their cellular effect, including size, shape, capping, and surface plasmon resonance profile, dose range, and exposure time. It highlights the strong dependence of AgNPs' cytotoxic effects on their characteristics and tumor model, making evident the strong need of standardization and full characterization. AgNPs' application in oncology research is a new, open, and promising field and needs additional studies.

Influence of Polysaccharides' Molecular Structure on the Antibacterial Activity and Cytotoxicity of Green Synthesized Composites Based on Silver Nanoparticles and Carboxymethyl-Cellulose

In this paper we report on the influence of polysaccharides' molecular structure on the antibacterial activity and cytotoxicity of composites based on silver nanoparticles (AgNPs) immobilized into carboxymethyl-cellulose (CMC). These composites were green synthesized from the reduction of silver ions into aqueous solutions of the polysaccharide, using CMC with different degree of substitution (DS) and molecular weight (Mw). The composites were characterized by transmission electron microscopy (TEM), as well as infrared (ATR-FTIR), ultraviolet (UV-Vis), Raman, and X-ray photo-electron (XPS) spectroscopic techniques. The antibacterial activity was evaluated with minimum inhibitory concentration against Enterococcus faecalis. The cytotoxicity of composites was assessed against human gingival fibroblast. Experimental evidence suggests that particle size distribution and morphology of AgNPs change according to the quantity of silver precursor added to the reaction, as well as the DS and Mw of CMC used for composites preparation. This is related to the dispersion of silver precursor into aqueous solutions of the polysaccharide and the formation of Ag-O coordination bonds among AgNPs and COO^- moieties of CMC. Moreover, these coordination bonds modify the ability of nanoparticles to produce and release Ag⁺ into aqueous dispersion, adjusting their antibacterial activity and the induction of cytotoxicity into the tested biological environments.

Environmentally benign corrosion inhibitors based on cellulose niacin nano-composite for corrosion of copper in sodium chloride solutions

There is a high demand for high performance, effective and eco-friendly corrosion inhibitors for industrial applications. Therefore, novel benign high performance corrosion inhibitors based on biopolymer were synthesized in-situ using different cellulosic materials and niacin. Characterization of the cellulose nano-composite was carried out by Fourier transform infrared (FTIR), thermal gravimetric analysis (TGA), dynamic light scattering (DLS), scanning electron microscopy (SEM) and energy dispersive X-ray (EDX). The anticorrosive performance of cellulose composites for copper in 3.5% NaCl solutions were evaluated using polarization and electrochemical impedance spectroscopy (EIS) techniques. Surface morphology of uninhibited and inhibited composites was studied using SEM and EDX. Potentiodynamic polarization measurements confirmed that cellulose based inhibitors act as a mixed type inhibitor. The inhibition efficiency of ethyl cellulose-niacin composite (NEC) was 94.7% outperforms those of microcrystalline cellulose-niacin composite (NMCC) and carboxymethyl cellulose-niacin composite (NCMC) which were 33.2 and 83.4%, respectively, as green corrosion inhibitors for Copper in 3.5% NaCl solutions. The data extracted from EIS were fitted through an equivalent circuit to model the corrosion inhibition.

Nano-amino acid cellulose derivatives: Eco-synthesis, characterization, and antimicrobial properties

Nowadays the using of eco-systems to synthesize new materials is the promising issue. In this work, new eco-synthesis method was developed to prepare antimicrobial cellulosic-amino acid base ligand and complexes with copper. The complex was characterized via different instrumental analysis (Fourier transform infrared spectroscopy (FTIR), UV-vis, differential scanning calorimetry (DSC), dynamic light scattering (DLS), scanning electron microscopy (SEM) and energy dispersive X-ray (EDX)) as well as two antimicrobial screening tools (minimal inhibition concentration (MIC) and time required for killing). The UV-vis spectroscopic data indicates the metal to-ligand charge transfer transitions which is consistent with square planar geometry. DLS and SEM approved that the complex particles are in nano-size. Prepared complex appeared highly antimicrobial activity against all tested microbial organisms which can be described as broad spectrum antimicrobial agent. Rapid killing kinetics was beneficial in helping to resolve an infection more rapidly.

Green, economic, and partially biodegradable wood plastic composites via enzymatic surface modification of lignocellulosic fibers

Lignocellulosic fibers, which obtained from Citrus trees trimmings, were modified with Aspergillus flavus (EGYPTA5) enzymes. The non-modified and the modified lignocellulosic fibers were used with low density polyethylene (LDPE) by melt blending brabender method at 170 °C with different ratio (5, 10 and 20 wt%) to obtain wood plastic composites (WPC). The prepared samples were characterized using Fourier-transformed infrared (FT-IR), Scan Electron Microscope (SEM), and Water vapor transmission rate (WVTR) as well as, the mechanical, thermal, biodegradability and swelling properties were examined. The fabricated WPC displayed good mechanical and thermal properties compare with pure LDPE. Also, the WVTR was enhanced by the addition of modified lignocellulosic fibers over the unmodified one. Moreover, the enzymes assay such as cellulase and lignin peroxidase enzymes were estimated and confirming the growing of fungi on the lignocellulosic fiber in solid state fermentation condition to improve lignin peroxidase production and eliminate cellulose enzymes. The fabricated WPC can be used in different environmental application such as packaging system, that it will be green, economic, and partially biodegradable.