A facile comparative approach towards utilization of waste cotton lint for the synthesis of nano-crystalline cellulose crystals along with acid recovery

Nanocellulose-based conductive composites: A review of systems for electromagnetic interference shielding applications

Electronic systems and telecommunications have grown in popularity, leading to increasing electromagnetic (EM) radiation pollution. Environmental protection from EM radiation demands the use of environmentally friendly products. The design of EM interference (EMI) shielding materials using resources like nanocellulose (NC) is gaining traction. Cellulose, owing to its biocompatibility, biodegradability, and excellent mechanical and thermal properties, has attracted significant interest for developing EMI shielding materials. Recent advancements in cellulose-based EMI shielding materials, particularly modified cellulosic composites, are highlighted in this study. By incorporating metallic coatings compounded with conductive fillers and modified with inherently conductive elements, conductivity and effectiveness of EMI shielding can be significantly improved. This review discusses the introduction of EMI shields, cellulose, and NC, assessing environmentally friendly EMI shield options and diverse NC-based composite EMI shields considering their low reflectivity. The study offers new insights into designing advanced NC-based conductive composites for EMI shielding applications.

Nanocellulose-stabilized nanocomposites for effective Hg(II) removal and detection: a comprehensive review

Mercury pollution, with India ranked as the world's second-largest emitter, poses a critical environmental and public health challenge and underscores the need for rigorous research and effective mitigation strategies. Nanocellulose is derived from cellulose, the most abundant natural polymer on earth, and stands out as an excellent choice for mercury ion remediation due to its remarkable adsorption capacity, which is attributed to its high specific surface area and abundant functional groups, enabling efficient Hg(II) ion removal from contaminated water sources. This review paper investigates the compelling potential of nanocellulose as a scavenging tool for Hg(II) ion contamination. The comprehensive examination encompasses the fundamental attributes of nanocellulose, its diverse fabrication techniques, and the innovative development methods of nanocellulose-based nanocomposites. The paper further delves into the mechanisms that underlie Hg removal using nanocellulose, as well as the integration of nanocellulose in Hg detection methodologies, and also acknowledges the substantial challenges that lie ahead. This review aims to pave the way for sustainable solutions in mitigating Hg contamination using nanocellulose-based nanocomposites to address the global context of this environmental concern.

Highly efficient dissolution and reinforcement mechanism of robust and transparent cellulose films for smart packaging

The packaging of fresh foods increasingly focuses on renewable and eco-friendly cellulose films, but their low dissolution efficiency and weak mechanical strength greatly limit their wide application, which also cannot be used for smart packaging. Here, a highly efficient synergistic chloride-salt dissolution method was proposed to fabricate robust, transparent, and smart cellulose films. Cellulose films with appropriate Ca2+ concentration exhibited robust mechanical strength, better thermal stability, high transparency and crystallinity. The metal chelation of Ca2+ with cellulose chains could induce cellulose chain arrangement during the cellulose regeneration process. Particularly, compared to pure cellulose films, the tensile strength and elongation at break of cellulose films with suitable Ca2+ were increased by 167 % and 200 %, respectively. Moreover, optimal cellulose films can be used to reflect the quality of the fruit by detecting changes in ethanol gas. Hence, a novel strategy is presented to fabricate robust and transparent cellulose films with great potential application for smart packaging.

Supersensitive metal free in-situ synthesized graphene oxide@cellulose nanocrystals acetone sensitive bioderived sensors

A series of graphene oxide@cellulose nanocrystal (GO@CNC) nanoparticles (NPs) were synthesized in this study using a room temperature-based simple modified hummers process. The morphological structures, as well as chemical characteristics of these materials were characterized using, transmission electron microscopy (TEM), X-ray diffraction (XRD), and other techniques. The results show that the as-prepared nanoparticles are made up of crystallite grains with an average size of around 7.82, 14.69, 10.77, 7.82, and 12.51 nm for GO, CNC, GO1@CNC1, GO2@CNC3, and GO3@CNC3 respectively, and OH &COOH functionalities on the NPs' surfaces. GO@CNC NPs exhibit significantly better sensing characteristics towards acetone when compared to virgin GO nanoplatelets; specifically, the optimal sensor based on GO3@CNC3 NPs showed the highest response (60.88 at 5 ppm), which was higher than that of the virgin GO sensor at 200 °C operating temperature and including those reported. Furthermore, the sensors have a high sensitivity towards acetone in sub-ppm concentrations as well as a detection limit of 5 ppm, making it a viable candidate for diabetes breath testing.

Cationic cellulose nanocrystals as sustainable green material for multi biological applications via ξ potential

The present study aims to disclose the activity of cationic cellulose nanocrystals (CNCs) as a promising multifunctional green nanomaterial with applications in biological aspects. The basic reason behind multifunctional behavior is zeta potential and size distribution of nano biopolymers; exhibit a remarkable physical and biological activity compared to normal molecules.The preliminary characterized studied using absorption spectral analysis showed strong absorption peak indicating that spectrum curves can be screen by UV spectra at wavelength range 200-400nm. Ultrastructural studies (SEM-EDS and TEM), manifest that CNCs are elliptical particles in shape. Also, TEM show CNCs are the ideal illustration of zero-dimensional (0-D) NPs, less than 5.1 nm in diameter with Cationic charge and similar results in size distribution by TEM. Nonetheless, developed as antioxidant activity IC₅₀ was 1467 ± 25.9 µg/mL, antimicrobial activity tested G^-ve strains, but not affected on tested G^+ve strains and tested fungi. Evaluating toxicity effect of cationic CNCs against human blood erythrocytes (RBCs) and Lymphocyte Proliferation and the end point evaluate by comet assay, which proven no cytotoxic effect. Also, a high dose 500 µg/mL of CNCs highly significant (p < 0.05) reduction in cell viability of Caco-2 cancer cells after 24 h. incubation time, whereas the IC₅₀ was 1884 ± 19.46 µg/mL. Moreover, genotoxic assay indicates Caco-2 cells cause apoptosis with no fragmentation in DNA. Undoubtedly, the obtained results brought about by the interaction of layers carrying opposing charges. Additionally, there is a balance between hydrophilic contact and electrostatic attraction. That emphasizes how the cationic CNCs have excellent potential for use as antioxidants, antimicrobials, and anticancer agents.

Transdermal therapeutic system: Study of cellulose nanocrystals influenced methylcellulose-chitosan bionanocomposites

Over the past few years, there is a drive toward the fabrication and application of bio-based non-cytotoxic drug carriers. Cellulose nanocrystals (CNCs) have gotten immense research attention as a promising bioderived material in the biomedical field due to its remarkable properties. The delivery of analgesic and anti-inflammatory drug, ketorolac tromethamine (KT) by transdermal route is stipulated herewith to fabricate suitable transdermal therapeutic systems. We have synthesized CNCs from jute fibers and aim to develop a non-cytotoxic polymer-based bionanocomposites (BNCs) transdermal patch, formulated with methylcellulose (MC), chitosan (CH), along with exploration of CNCs for sustained delivery of KT, where CNCs act as nanofiller and elegant nanocarrier. CNCs reinforced MCCH blends were prepared via the solvent evaporation technique. The chemical structure, morphology, and thermal stability of the prepared bionanocomposites formulations were studied by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), TGA, DSC, DMA, and SEM. The In vitro drug release studies were executed using Franz diffusion cells. The BNC patches showed in-vitro cytocompatibility and the drug release study revealed that BNC containing 1 wt% CNCs presented the best-sustained drug release profile. The bioderived CNCs appear to enhance the BNCs drug's bioavailability, which could have a broad prospect for TDD applications.

Chlorine-free extraction and structural characterization of cellulose nanofibers from waste husk of millet (Pennisetum glaucum)

This study aims to extract cellulose nanofibers (CNFs) from a sustainable source, millet husk, which is considered as an agro-waste worthy of consideration. Pre-treatments such as mercerisation, steam explosion, and peroxide bleaching (chlorine-free) were applied for the removal of non-cellulosic components. The bleached millet husk pulp was subjected to acid hydrolysis (5% oxalic acid) followed by homogenization to extract CNFs. The extracted CNFs were characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Dynamic Light Scattering (DLS), Energy Dispersive X-ray Spectroscopy (EDX), Thermogravimetry (TG and DTG), Differential scanning calorimetry (DSC), and Solid state ¹³C nuclear magnetic resonance spectroscopy (solid state ¹³C NMR). The isolated CNFs show a typical cellulose type-I structure with a diameter of 10-12 nm and a crystallinity index of 58.5%. The appearance of the specific peak at 89.31 ppm in the solid state ¹³C NMR spectra validates the existence of the type-I cellulose phase in the prepared CNFs. The prepared CNFs had a maximum degradation temperature (T_max) of 341 °C, that was 31 °C greater than raw millet husk (RMH). The outcome of the study implies that the nanofibers are prominent alternatives for synthetic fibers for assorted potential applications, especially in manufacturing green composites.

Sustainable Cellulose Aerogel from Waste Cotton Fabric for High-Performance Solar Steam Generation

The textile industry has been considered as one of the polluting industries, producing a large amount of textile waste and CO₂ emissions each year. Recycling of waste fabric has attracted more research interest in recent years. Herein, renewable polydopamine (PDA)-functionalized cellulose aerogels (CAs) have been designed by a feasible and green way for clean water generation. With the polymerization of PDA on the surface, which possesses excellent photothermal conversion performance and water purification ability, the resulting CA could achieve a high light absorption of 96.5% with the evaporation rate of 2.74 kg m^-2 h^-1 under 1 sun. Meanwhile, the solar steam generator with the increasing height can absorb energy from adjacent ambient air to strengthen the vapor generation. The features of renewable CAs can achieve efficient water evaporation, which combined with their low material cost and recycling, offer promise in reducing not only energy consumption but also the environmental footprint of cotton textiles.

A synergistic combination of shrimp shell derived chitosan polysaccharide with Citrus sinensis peel extract for the development of colourful and bioactive cellulosic textile

Green finishing formulations have established an important place in textile dyeing and finishing industry. The use of plant extracts along with chemical metallic mordants is reported to increase colour values and improve fastness properties. However, metal salts as mordants constantly pose environmental and human health risks. The purpose of this work is to examine and extend the knowledge of natural dyeing technology considering the use of biological macromolecule chitosan (CS) to increase dye uptake, fastness and impart functional properties. The cotton was pre-coated with chitosan using pad-dry method and optimal chitosan concentrations were selected by evaluating the colour spectrometry data in term of CIEL*a*b* values. The chemical nature of the extract was characterized by UV-Vis, Fourier-transform infrared spectroscopy (FT-IR) and Thermogravimetric analysis (TGA) whereas dyed samples were analysed by Scanning electron microscopy (SEM), Energy dispersive X-ray (EDX) with mapping analysis, FT-IR, and TGA. Results showed that the aqueous extract of Citrus sinensis peel yielded interestingly shades all lying in yellow- red quadrant of CIELa*b* colour space with acceptable grades of wash and dry-wet fastness properties. This study reveals important information to understand synergism between two natural products in imparting semi durable antioxidant and antibacterial activity against E. coli and S. aureus, and thus offers full potential to be used in natural dyeing technology.

Fast Production of Cellulose Nanocrystals by Hydrolytic-Oxidative Microwave-Assisted Treatment

In contrast to conventional approaches, which are considered to be energy- and time-intensive, expensive, and not green, herein, we report an alternative microwave-assisted ammonium persulfate (APS) method for cellulose nanocrystals (CNCs) production, under pressurized conditions in a closed reaction system. The aim was to optimize the hydrolytic-oxidative patented procedure (US 8,900,706), replacing the conventional heating with a faster process that would allow the industrial scale production of the nanomaterial and make it more appealing to a green economy. A microwave-assisted process was performed according to different time–temperature programs, varying the ramp (from 5 to 40 min) and the hold heating time (from 60 to 90 min), at a fixed reagent concentration and weight ratio of the raw material/APS solution. Differences in composition, structure, and morphology of the nanocrystals, arising from traditional and microwave methods, were studied by several techniques (TEM, Fourier transform infrared spectroscopy (FTIR)-attenuated total reflectance (ATR), dynamic light scattering (DLS), electrophoretic light scattering (ELS), thermogravimetric analysis (TGA), X-ray diffraction (XRD)), and the extraction yields were calculated. Fine tuning the microwave treatment variables, it was possible to realize a simple, cost-effective way for faster materials’ preparation, which allowed achieving high-quality CNCs, with a defined hydrodynamic diameter (150 nm) and zeta potential (−0.040 V), comparable to those obtained using conventional heating, in only 90 min instead of 16 h.

Effect of Cellulose Nanocrystals from Different Lignocellulosic Residues to Chitosan/Glycerol Films

Interest in nanocellulose obtained from natural resources has grown, mainly due to the characteristics that these materials provide when incorporated in biodegradable films as an alternative for the improvement of the properties of nanocomposites. The main purpose of this work was to investigate the effect of the incorporation of nanocellulose obtained from different fibers (corncob, corn husk, coconut shell, and wheat bran) into the chitosan/glycerol films. The nanocellulose were obtained through acid hydrolysis. The properties of the different nanobiocomposites were comparatively evaluated, including their barrier and mechanical properties. The nanocrystals obtained for coconut shell (CS), corn husk (CH), and corncob (CC) presented a length/diameter ratio of 40.18, 40.86, and 32.19, respectively. Wheat bran (WB) was not considered an interesting source of nanocrystals, which may be justified due to the low percentage of cellulose. Significant differences were observed in the properties of the films studied. The water activity varied from 0.601 (WB Film) to 0.658 (CH Film) and the moisture content from 15.13 (CS Film) to 20.86 (WB Film). The highest values for tensile strength were presented for CC (11.43 MPa) and CS (11.38 MPa) films, and this propriety was significantly increased by nanocellulose addition. The results showed that the source of the nanocrystal determined the properties of the chitosan/glycerol films.

Effect of cellulose nanocrystals on the performance of drug loaded in situ gelling thermo-responsive ophthalmic formulations

Triblock poloxamer copolymer (PM) has been extensively utilized to deliver various ophthalmic pharmaceutical compounds. The aim of efficient ophthalmic drug delivery strategy is to attain the longer precorneal resident time and good bioavailability of drugs. In this pursuit, the influence of cellulose nanocrystals (CNC) on the in situ gelation behavior of PM and in vitro release of pilocarpine hydrochloride from the nanocomposites formulations was studied. The critical concentration of gelation of PM being 18% (wt/v) was dropped to 16.6% (wt/v) by the addition of a very low percentage of CNC. The reinforcing nature of CNC via H-bonding in the in situ nanocomposite gel also led to an increase in gel strength along with the sustained release of loaded drugs when compared with the pure PM gel. All formulations revealed that the drug release mechanism is controlled by the Fickian diffusion. Thus, the CNC has a significant effect on the gelation behavior, gel strength, and drug release kinetics of PM-CNC formulations.