Rheological properties in relation to molecular structure of quinoa starch

Free-radical-induced grafting of rice starch with gallic acid and evaluation of the reaction products' ability to stabilize Pickering emulsions

Pickering emulsions can be stabilized with native rice starch (NRS), but their hydrophobicity is low. Gallic acid (GA) has a simple molecular structure and a rich variety of functional groups. Pickering emulsions can be made more stable by hydrophobically modifying the esterification reaction of NRS with GA to improve its dual wetting properties. In this study, the free radical-induced grafting method was used to prepare rice starch-GA graft copolymer (NRS-g-GA). The addition of GA could improve the crystallinity and orderliness of NRS. The results of Fourier transform infrared spectroscopy and 1H NMR indicated that GA was successfully grafted onto NRS. After modification, the contact angle of NRS increased from 18.2° to 60.2° (NRS-g-GA; 1:1). The emulsion prepared from NRS-g-GA showed better stability than NRS, improving the emulsification of NRS. Its stable emulsion exhibited an emulsion system dominated by elasticity. Thus, GA could be grafted onto NRS to enhance its emulsifying properties, opening up new applications for GA and NRS and promoting the development of starch-based Pickering emulsions in the future.

Physicochemical properties of esterified/crosslinked quinoa starches and their influence on bread quality

BACKGROUND

Starch is the main component of quinoa seeds. However, quinoa starch has poor solubility in cold water and poor mechanical resistance and is easily aged, which limit its application. Therefore, modification of its structure to improve its functional properties is necessary.

RESULTS

This research used acetic anhydride and sodium trimetaphosphate to modify the structure of starch molecules and investigated their influence on bread quality. The results showed that both esterification and crosslinking prevented the aggregation behavior of starch molecules. Moreover, they both decreased the gelatinization enthalpy change and relative crystallinity of the starch. Compared with native starch, modification significantly decreased the gelatinization temperature from 57.01 to 52.01 °C and the esterified starch exhibited the lowest enthalpy change with a 44.2% decrease. Modified starch increased the specific volume and decreased the hardness and chewiness of bread. Modification did not influence the moisture content in bread but impacted the water retention capacity, depending on the degree of modification. Low and medium degrees of modification improved the water retention capacity during storage. By contrast, a high degree of modification (10 g kg-1 crosslinking agent) decreased the water retention capacity. The dually modified quinoa starch (esterified and crosslinked) showed no influence on the textural properties of bread.

CONCLUSION

This study demonstrated that both esterification and crosslinking significantly improved the functional properties of quinoa starch. Crosslinked or esterified quinoa starches have the potential to improve the textural properties of bakery products. © 2024 Society of Chemical Industry.

V-type granular starches prepared by maize starches with different amylose contents: An investigation in structure, physicochemical properties and digestibility

V-type granular starches (VGSs) were prepared via an ethanol-alkaline (EA) method using maize starch with different amylose contents, specifically, high amylose (HAM), normal maize starch (MS), and waxy maize starch (WS). The X-ray diffraction pattern of the native starch was completely transformed into a V-type pattern after the EA treatment, indicating a structural change in the starch granules. The VGSs prepared by HAM had highest relative crystallinity (31.8°), while the VGSs prepared by WS showed amorphous diffraction pattern. Excessive NaOH, however, would disrupt the formation of V-type structures and cause granular shape rupture. The quantity of double-helical structures, particularly those formed by amylopectin at the starch granules' periphery, significantly decreased. Conversely, single-helical structures formed by amylose increased. A notable rise in the relative crystallinity of V crystals. Four VGS samples, characterized by granular integrity, were chosen for the next investigation of physicochemical and digestive properties. VGS prepared from HAM exhibited higher granular integrity, lower cold-water swelling extent (59.0 and 161.0 cP), improved thermal stability (the value of breakdown as lower as 57.67 and 186.67 cP), and higher resistance to digestion (RS content was up to 10.38 % and 9.00 % higher than 5.86 % and 5.66 % of VGS prepared from WS and MS). The results confirmed that amylose content has a substantial impact on the microstructural and physicochemical properties of VGSs.

Enhancing the anti-thixotropic properties of waxy maize starch modified by different α-amylases and its underlying molecular mechanism

The large thixotropy of the starch-thickened foods is often unfavorable in many applications. This study examined the contribution of the proportion of amylopectin chain length to time-dependence of starch gels. The α-amylase (AM) from Bacillus stearothermophilus and maltogenic α-amylase (MA) from Bacillus subtilis were used to trim amylopectin in different reaction patterns. HPLC, HPAEC and IBC data suggested AM attacked B-chains (DP 12-36), causing an increment in number of the chains with DP 6-12, whereas MA primarily trimmed the short B-chains (DP 12-18) and partial A-chains (DP 9-12) to generate short chains with DP 6-9. Interestingly, the recovery of AM-gels was faster than MA-gels at the same degree of hydrolysis when subjected to shear according to the linear correlation analysis. When releasing the same mass of sugar, shortening of the long internal chains played an important role in reducing time dependence of starch gel rather than the external side chains. Possible models were proposed to illustrate the differences in the mechanism of rapid-recovery caused by different side-chain distributions. The outcome provided a new perspective to regulate the thixotropy behavior of starch through enzyme strategies in the granular state.

Impact of Corn Starch Molecular Structures on Texture, Water Dynamics, Microstructure, and Protein Structure in Silver Carp (Hypophthalmichthys molitrix) Surimi Gel

This study systematically investigates the impact of corn starch molecular structures on the quality attributes of surimi gel products. Employing molecular analyses to characterize corn starch, three amylopectin fractions (A, B1, and B2), categorized by the degree of polymerization ranges (6 < X ≤ 12, 12 < X ≤ 24, and 24 < X ≤ 36, respectively) were specifically focused on. The surimi gel quality was comprehensively assessed through texture profile analysis, nuclear magnetic resonance, scanning electron microscopy, stained section analysis, and Fourier transform infrared spectroscopy. Results indicated the substantial volume expansion of corn amylopectin upon water absorption, effectively occupying the surimi gel matrix and fostering the development of a more densely packed protein network. Starch gels with higher proportions of A, B1, and B2 exhibited improved hardness, chewiness, and bound water content in the resultant surimi gels. The weight-average molecular weight and peak molecular weight of corn starch showed a strong positive correlation with surimi gel hardness and chewiness. Notably, the secondary structure of proteins within the surimi gel was found to be independent of corn starch's molecular structure. This study provides valuable insights for optimizing formulations in surimi gel products, emphasizing the significance of elevated A, B1, and B2 content in corn starch as an optimal choice for crafting dense, chewy, water-retaining surimi gels.

Gluten-free Nan-e-Fasaee: Formulation optimization on the basis of quinoa flour and inulin

Diversification of gluten-free (GF) bakery products is considerably important, as those who suffer from gluten intolerance should follow a GF diet their whole life. Regarding this study, it was aimed at optimizing the formulation of a quinoa-based GF traditional bakery product, i.e. Nan-e-Fasaee using inulin as a bifunctional agent (both a prebiotic compound and a structure-forming agent). Otherwise, its potential role as a fat and sugar replacer was also assessed. For this purpose, short (S)- and long (L)-chain inulin were used as sugar and fat replacers, respectively, at 0%-50% w/w in quinoa flour (QF)-based GF Nan-e-Fasaee and optimization was done based on rheological, textural, and sensory analysis. Results indicated that QF diet provided the batter with the dominance of elastic modulus and increased hardness (i.e. 5170.0 ± 22.50 g in the presence of QF compared to 1477.0 ± 20.81 g in wheat-based ones). Inulin inclusion reduced the hardness, as the lowest was observed at S-inulin substitution levels of 40% and 50% w/w, with values equal to 2422.0 ± 20.81 and 2431.0 ± 35.57 g, respectively (the most similar ones to control sample). The interference of S-inulin with the non-gelatinized starch structure is supposed to decrease the hardness. The highest score in texture was also perceived at F6 and F13, with values equal to 8.00 ± 0.10 and 7.97 ± 0.05, respectively. Using S- and L-inulin in combination is found to improve the textural characteristics due to preventing the competitive role of sugar in water absorption in formulations containing L-inulin. Regarding optimization of quinoa-based GF Nan-e-Fasaee with reduced sugar and fat levels using inulin, it is found to be feasible.

Whole-grain highland barley premade biscuit prepared by hot-extrusion 3D printing: Printability and nutritional assessment

In this study, to explore the possibility of applying whole-grain highland barley (HB) in functional food, HB premade biscuit was created by hot-extrusion 3D printing (HEP) for the first time, and its printability and nutritional functions were evaluated. The rheology results showed 20% (w/w) HB suspension with 9% corn oil addition had better printability due to the formation of a structure with higher elasticity and stronger resistance to deformation. Moreover, the obtained premade biscuit had lower predicted glycemic index (pGI) and starch digestibility. Meanwhile, in vivo experiment results showed it could affect the glycolipid metabolism, ameliorate the high fat diet (HFD)-induced metabolic disorders and maintain the balance of the gut microbial ecology. This could be attributed to the decrease in Firmicutes/Bacteroidetes ratio and the proliferation of propionate-producing probiotics, especially Veilonella, Weissella and Desulfovibrio. Overall, this study could provide basic data and innovative approaches to prepare nutritional whole-grain foods.

Effects of starch multiscale structure on the physicochemical properties and digestibility of Radix Cynanchi bungei starch

Radix Cynanchi bungei (RCb) contains 40-70 % starch, yet little is known about the structure and properties of RCb starch. In this study, the multiscale structure of two cultivars of RCb starch (YW201501 and BW201001) were characterized, and the effects of starch structure on its physicochemical properties were investigated. The differences in physicochemical properties of RCb starch were influenced by its multiscale structure. The starch granules were round and irregular polygon, with sizes ranging between 2 and 14 μm. YW201501 had a higher amylose (21.81 %) and lipid (0.96 %) content, molecular weight (59.5 × 106 g/mol), and A chain proportion (27.5 %), and a lower average granule size (6.14 μm), amylopectin average chain length (19.7), and B3 chain proportion (10.3 %). Both starches were B-type crystalline, with higher crystallinity (26.3 %) and R1047/1022 (0.74) for YW201501, resulting in large gelatinization enthalpy. In addition, the higher peak viscosity and larger retrogradation degree of YW201501 were correlated to its higher amylose content. In vitro digestibility revealed that the low rapidly digestible starch and high resistant starch of BW201001 were related to the fine structure of starch. YW201501 and BW201001 had a medium glycemic index (62.6-66.0) with potential for processing into healthy starchy foods.

Comparative study of rheological properties and Pickering emulsion stabilizing capacity of nonenyl succinic anhydride and octenyl succinic anhydride modified amaranth starches

Functional properties and ability to stabilize Pickering emulsions of amaranth starch with the novel nonenyl succinic anhydride (NSA) modification and the widely used octenyl succinic anhydride (OSA) modification were compared. The NSA modification was more effective in altering the rheological properties of amaranth starches. NSA-modified amaranth starch showed significantly higher peak viscosity (7.13 Pa·s at DS of 0.02209) than the OSA-modified amaranth starch (6.10 Pa·s at DS of 0.03042). The gelatinization temperature, gelatinization enthalpy, and relative crystallinity of amaranth starch were more affected by the OSA than the NSA. The Pickering emulsions stabilized with NSA-modified starches had higher stability than those with the OSA-modified starches as characterized by particle size distribution, morphological, and rheological approaches. A lower degree of substitution by NSA than by OSA is needed to achieve a similar emulsification capacity. Thus, the NSA modification could be an efficient alternative to OSA modification in tailoring physicochemical and rheological functions, as well as stabilizing Pickering emulsions.

Impact of long-term ultrasound treatment on structural and physicochemical properties of starches differing in granule size

Granule size is a critical parameter affecting starch processing properties. Ultrasound treatments of up to 22 h were applied on two starches differing in granule size (quinoa starch and maize starch). The two starches showed significantly different trends in both structural and physicochemical aspects affected by the ultrasound treatments. For the small granule starch (volume-weighted mean particle size of 1.79 μm), short-term ultrasonication caused an increase of swelling power. As the treatment time increased, the physicochemical properties were influenced by the degradation of amylopectin external chains. The X-ray diffraction results showed a decrease of relative crystallinity and changes of peak areas with long-term treatment. On the other hand, a balance between amylose leaching and surface damages was seen for the large granule starch (volume-weighted mean particle size of 18.3 μm). The effect of ultrasound modification on starches with different molecular and granular structures was discussed. A possible mechanism of the ultrasound effect was proposed.

Advances in isolation, characterization, modification, and application of Chenopodium starch: A comprehensive review

The Chenopodium genus includes >250 species, among which only quinoa, pigweed, djulis, and kaniwa have been explored for starches. Chenopodium is a non-conventional and rich source of starch, which has been found effective in producing different classes of food. Chenopodium starches are characterized by their smaller granule size (0.4-3.5 μm), higher swelling index, shorter/lower gelatinization regions/temperature, good emulsifying properties, and high digestibility, making them suitable for food applications. However, most of the investigations into Chenopodium starches are in the primary stages (isolation, modification, and characterization), except for quinoa. This review comprehensively explores the major developments in Chenopodium starch research, emphasizing isolation, structural composition, functionality, hydrolysis, modification, and application. A critical analysis of the trends, limitations, and scope of these starches for novel food applications has also been provided to promote further scientific advancement in the field.

Physicochemical characteristics and in vitro digestibility of starches from colored quinoa (Chenopodium quinoa) varieties

The quinoa flour processing is mostly subject to the properties of starch. Starches from four colored quinoa varieties, including white quinoa (QS-W), yellow quinoa (QS-Y), red (QS-R), and black (QS-B), were compared with respect to their physicochemical properties and in vitro digestibility. Results indicated that QS-B exhibited the highest content of amylose (8.14%) (p < 0.05). All starch samples exhibited as irregular sphere with a particle size less than 3 µm. Results of the FT-IR and X-ray showed that the short-range order of the four quinoa starches exhibited no significant difference; all starches showed a typical A-type diffractrometric pattern and was not affected by seed color, and QS-Y had the highest relative crystallinity (34.3%) (p < 0.05). In addition, QS-W reflected the highest solubility (6.32%) and QS-Y showed the highest swelling power (19.45 g/g) (p < 0.05). QS-Y also presented a higher ΔH value (11.46 J/g) (p < 0.05), while QS-R peak temperature and peak G' were the lowest. Besides, QS-B had the highest slow-digestible starch (SDS) and resistant starch (RS) content, while the lowest estimated glycemic index (eGI) value (p < 0.05). Also, there was a negative correlation between hydrolysis rates and amylose content of quinoa starch. PRACTICAL APPLICATION: Due to the low gelatinization temperature of quinoa starch, it can be used to both produce and improve instant and fast food products. Quinoa starch particles are small, and Pickering emulsions and additives have potential application values. Red quinoa contains easily digestible starch, which can be a good food choice for infants and the elderly, while white quinoa starch has less swelling power and can be used in noodle products. The results of this study can help to underpin the study of quinoa nonstarch components versus starch component.

Structural Characterization and Antioxidant Capacity of Quinoa Cultivars Using Techniques of FT-MIR and UHPLC/ESI-Orbitrap MS Spectroscopy

The existence of more of 16,000 varieties of quinoa accessions around the world has caused a disregard on their structural and phytochemical characteristics. Most of such accessions belong to cultivars settled in Colombia. The goal of this research was to evaluate the structural attributes and antioxidant capacities from six quinoa cultivars with high productive potential from central regions in Colombia. This study used middle-range infrared spectroscopy (IR-MIR) to determine the proteins, starch and lipids distinctive to quinoa grains. Ultra-high-performance liquid chromatography electrospray ionization Orbitrap, along with high-resolution mass spectrometry (UHPLC/ESI-Orbitrap MS), were also used to identify the existence of polyphenols in cultivars. The antioxidant capacity was determined through DPPH, ABTS and FRAP. The spectrums exhibited significant variances on the transmittance bands associated with 2922 cm-1, 1016 cm-1 and 1633 cm-1. Moreover, the intensity variations on the peaks from the secondary protein structure were identified, mainly on the bands associated with β-Sheet-1 and -2, random coil α elice and β-turns-2 and -3. Changes found in the ratios 996 cm-1/1014 cm-1 and 1041 cm-1/1014 cm-1 were associated with the crystalline/amorphous affinity. Regarding the antioxidant capacity, great differences were identified (p < 0.001) mainly through FRAP methods, while the phenolic acids and flavonoids were determined by UHPLC/ESI-Orbitrap MS techniques. The presence of apigenin and pinocembrin on grains was reported for the first time. Titicaca and Nariño were the most phytochemically diverse quinoa seeds.

Production of Cyclic Anhydride-Modified Starches

Modified starches offer a biodegradable, readily available, and cost-effective alternative to petroleum-based products. The reaction of alkenylsuccinic anhydrides (ASAs), in particular, is an efficient method to produce amphiphilic starches with numerous applications in different areas. While ASAs are typically derived from petroleum sources, maleated soybean oil can also be used in an effort to produce materials from renewable sources. The reaction of gelatinized waxy maize starch with octenylsuccinic anhydride (OSA), dodecenylsuccinic anhydride (DDSA), a maleated fatty acid (TENAX 2010), phthalic anhydride (PA), 1,2,4-benzenetricarboxylic acid anhydride (trimellitic anhydride, TMA), and three maleated soybean oil samples, was investigated under different conditions. To minimize the reaction time and the amount of water required, the outcome of the esterification reaction was compared for starch dispersions in benchtop dispersed reactions, for starch melts in a heated torque rheometer, and for reactive extrusion in a pilot plant scale twin-screw extruder. The extent of reaction was quantified by ¹H NMR analysis, and changes in molecular weight and diameter were monitored by gel permeation chromatography (GPC) analysis. The outcome of the reactions varied markedly in terms of reaction efficiency (RE), molecular weight distribution, and average hydrodynamic diameter, for the products derived from the different maleated reagents used, as well as for the different reaction protocols.