Characterization of α-D-glucan produced by a probiont Enterococcus hirae KX577639 from feces of south Indian Irula tribals

Structural relationship of regioselectively-sulfonated botryosphaeran derivatives on activity against herpes simplex virus type 1

The bioactivities of sulfonated polysaccharides are frequently related to their substitution pattern. In this study, the regioselective sulfonation of an exocellular fungal (1→3)(1→6)-β-D-glucan (botryosphaeran) was performed by two different methods: mild sulfonation (MS) and via pivaloyl ester (PS), in order to study the influence of the sulfonation pattern on the antiviral activity of the respective derivatives. Two sulfonated derivatives with substitution degrees of 0.82 (MS) and 0.49 (PS) were obtained, with substitution patterns at positions C-6, and C-2/C-4 of the glucose units, respectively. All derivatives were chemically characterized and evaluated for antiviral activity against Herpes simplex virus type 1 (HSV-1) KOS strain, and dengue type 2 (DENV-2). The sample sulfonated at positions C-6 (MS) showed a remarkable antiviral effect on HSV-1 (IC50 of 5.38 μg mL1), while PS remained inactive. The investigation of the mode of action of sample MS pointed to the inhibition of HSV-1 adsorption to the host cells. Both samples were inactive towards the dengue virus strain. This study demonstrated that the presence of sulfate groups at the C-6 positions of botryosphaeran is the preferred substitution pattern that enables the antiviral activity towards HSV-1.

Fermentative optimization and characterization of exopolysaccharides from Enterococcus faecium F58 isolated from traditional fresh goat cheese

This study focused on optimizing the fermentation-based production of Exopolysaccharides (EPS) from Enterococcus faecium F58 initially isolated from traditional Moroccan Jben, a fresh goat cheese. Using the central composite design, yeast extract, MnSO4, and time affect EPS concentration. The highest experimental and predicted EPS production yields were 2.46 g/L ± 0.38 and 2.86 g/L, respectively. Optimal concentrations of yeast extract (4.46 g/L) and MnSO4 (0.011 g/L) were identified after 26 h at 30 °C. Characterization of EPS was conducted using SEM with EDX, XRD, and FTIR analyses. These tests revealed a specific morphology and an amorphous structure. Additionally, thermogravimetric analysis indicated adequate EPS stability up to 200 °C with anti-adhesion properties against different pathogens. This study offers valuable insights into the optimized production of EPS from Enterococcus faecium F58, which exhibits significant structural and functional properties for various applications in the food and biotechnology industries.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-023-01424-9.

Production, purification, and functional characterization of glucan exopolysaccharide produced by Enterococcus hirae strain OL616073 of fermented food origin

Microbial exopolysaccharides (EPS) are high molecular weight polymeric substances with great diversity and variety of applications in the food and pharma industry. In this study, we report the extraction of an EPS from Enterococcus hirae OL616073 strain originally isolated from Indian fermented food and its purification by ion exchange and size exclusion chromatography for physical-functional analyses. The EPS showed two prominent fractions (EPS F1 and EPS F2) with molecular mass 7.7 × 104 and 6.5 × 104 Da respectively by gel permeation chromatography. These fractions were further characterized by FTIR, HPTLC, GC-MS, and NMR as a homopolysaccharide of glucose linked with α-(1 → 6) and α-(1 → 3) glycosidic linkages. The porous, spongy, granular morphology of EPS was observed under scanning electron microscopy. EPS has revealed strong physico-functional properties like water solubility index (76.75 %), water contact angle (65.74°), water activity (0.35), hygroscopicity (3.05 %), water holding capacity (296.19 %), oil holding capacity (379.91 %), foaming capacity (19.58 %), and emulsifying activity (EA1-72.22 %). Rheological analysis showed that aqueous solution of EPS exhibited a non-Newtonian fluid behavior and shear-thinning characteristics. Overall, EPS exhibits techno functional properties with potential applications as a functional biopolymer in food and pharma industry.

Gene Expression, Structural Characterization, and Functional Properties of Exopolysaccharide Produced from Potential Probiotic Enterococcus faecalis NOC219 Strain

This study aimed to reveal the structural characterization and functional properties of microbial EPS-NOC219 material produced by the Enterococcus faecalis NOC219 strain with high EPS yield isolated from yogurt, with simultaneously, demonstrating the potential of this EPS for future industrial applications. According to the results of the analyses made for this aim, it was determined that the NOC219 strain contains the epsB, p-gtf-epsEFG, and p-gtf-P1 genes. In addition, it was also revealed that the EPS-NOC219 structure is expressed by the epsB, p-gtf-epsEFG, and p-gtf-P1 genes and has a heteropolymeric feature consisting of glucose, galactose, and fructose units. According to the results of the analyses made for this aim, it was determined that the EPS-NOC219 structure, which was produced from the NOC219 strain containing the epsB, p-gtf-epsEFG, and p-gtf-P1 genes, had a heteropolymeric structure consisting of glucose, galactose, and fructose units. On the other hand, it was shown that this structure had a thickener property, high heat stability exhibited a pseudoplastic flow behavior, and had a high melting point. This showed that the EPS-NOC219 had high heat stability and could be used as a thickener in heat treatment processes. In addition, it was revealed that it is suitable for plasticized biofilm production. On the other hand, the bioavailability of this structure was demonstrated with its high antioxidant activity (55.84%) against DPPH radicals and high antibiofilm activity against Escherichia coli (77.83%) and Listeria monocytogenes (72.14%) pathogens. These results suggest that the EPS-NOC219 structure may be an alternative natural resource for many industries as it has strong physicochemical properties and a healthy food-grade adjunct.

Exopolysaccharides produced by Enterococcus genus - An overview

Exopolysaccharide (EPS) biomolecules produced by lactic acid bacteria (LAB) are of prodigious interest due to their unique structural, physico-chemical, and functional characteristics. Several genera of LAB including Enterococcus spp. have been studied for EPS production by various research groups worldwide. EPS produced by various strains from Enterococcus spp. have shown a wide range of functional and technological properties with potential commercial applications. Numerous techniques are used in the characterization of Enterococcus EPS to reveal their structure, linkage, monosaccharide units, functional groups, morphology, and thermal properties. Bioactive potentials of Enterococcus EPS include antioxidant, antibacterial, antibiofilm, anticancer, immunological, prebiotic, and antidiabetic potentials which have been widely reported. These functional and biological properties make Enterococcus EPS a candidate of great importance for multiple applications in the area of food, pharmaceuticals, biomedical and environmental. This review is focused on EPS produced by various strains of the Enterococcus genus isolated from different sources. Several procedures and parameters involved in the production and purification of Enterococcus EPS are also deliberated along with the functional aspects and potential applications.

Production and Anti-Inflammatory Performance of PVA Hydrogels Loaded with Curcumin Encapsulated in Octenyl Succinic Anhydride Modified Schizophyllan as Wound Dressings

Amphiphilic polysaccharides can be used as wall materials and applied to encapsulate hydrophobic active chemicals; moreover, there is significant demand for novel medical high-molecular-weight materials with various functions. In order to prepare amphiphilic schizophyllan (SPG), octenyl succinic anhydride (OSA) was chosen to synthesize OSA-modified schizophyllan (OSSPG) using an esterified reaction. The modification of OSSPG was demonstrated through FT-IR and thermal analysis. Moreover, it was found that OSSPG has a better capacity for loading curcumin, and the loading amount was 20 μg/mg, which was 2.6 times higher than that of SPG. In addition, a hydrogel made up of PVA, borax, and C-OSSPG (OSSPG loaded with curcumin) was prepared by means of the one-pot method, based on the biological effects of curcumin and the immune-activating properties of SPG. The mechanical properties and biological activity of the hydrogel were investigated. The experimental results show that the dynamic cross-linking of PVA and borax provided the C-OSSPG/BP hydrogel dressing with exceptional self-healing properties, and it was discovered that the C-OSSPG content increased the hydrogel's swelling and moisturizing properties. In fibroblast cell tests, the cells treated with hydrogel had survival rates of 80% or above. Furthermore, a hydrogel containing C-OSSPG could effectively promote cell migration. Due to the excellent anti-inflammatory properties of curcumin, the hydrogel also significantly reduces the generation of inflammatory factors, such as TNF-α and IL-6, and thus has a potential application as a wound dressing medicinal material.

Characterization of Novel Exopolysaccharides from Enterococcus hirae WEHI01 and Its Immunomodulatory Activity

Exopolysaccharide (EPS) from probiotic Enterococcus hirae WEHI01 was isolated and purified by anion exchange chromatography and gel chromatography, the results of which show that the EPS consists of four fractions, namely I01-1, I01-2, I01-3, and I01-4. As the main purification components, I01-2 and I01-4 were preliminarily characterized for their structure and their immunomodulatory activity was explored. The molecular weight of I01-2 was 2.28 × 104 Da, which consists mainly of galactose, and a few other sugars including glucose, arabinose, mannose, xylose, fucose, and rhamnose, while the I01-4 was composed of galactose only and has a molecular weight of 2.59 × 104 Da. Furthermore, the results of an evaluation of immunomodulatory activity revealed that I01-2 and I01-4 could improve the viability of macrophage cells, improve phagocytosis, boost NO generation, and encourage the release of cytokines including TNF-α and IL-6 in RAW 264.7 macrophages. These results imply that I01-2 and I01-4 could improve macrophage-mediated immune responses and might be useful in the production of functional food and medications.

Structural characterization of a homopolysaccharide produced by Weissella cibaria FMy 2-21-1 and its potential application as a green corrosion inhibiting film

Steel corrosion is a global issue that affects safety and the economy. Currently, the homopolysaccharide (HoPS) structure of a novel lactic acid bacterium (LAB) is under study, as well as its application as a green corrosion inhibitor. Weissella cibaria FMy 2-21-1 is a LAB strain capable of producing HoPS in sucrose enriched media. The isolated and purified HoPS was characterized by different spectroscopic analyses as a linear α-1,6 dextran adopting a random coil conformation, with high molecular weight and extended size in water. The polysaccharide showed a semi-crystalline organization, which is a requirement for film formation. Its biocoating showed a grainy network structure, with a slightly lesser hydrophobic role in the aqueous environment than in the ionic one. The electrochemical measurements of the steel-HoPS coating showed that the biopolymer layer acts as an anodic-type corrosion inhibitor, with high resistance to corrosion by water and with chloride ions which prevent pitting, a corrosion process typical of bare steel. Few reports have cited the application of LAB HoPS as corrosive coating inhibitors. This work is the first to explore the influence of a structurally characterized dextran from Weissella cibaria strain as a potential steel corrosion inhibitor in ionic environments.

Multiple Modular Engineering of Bacillus Amyloliquefaciens Cell Factories for Enhanced Production of Alkaline Proteases From B. Clausii

Bacillus amyloliquefaciens is a generally recognized as safe (GRAS) microorganism that presents great potential for the production of heterologous proteins. In this study, we performed genomic and comparative transcriptome to investigate the critical modular in B. amyloliquefaciens on the production of heterologous alkaline proteases (AprE). After investigation, it was concluded that the key modules affecting the production of alkaline protease were the sporulation germination module (Module I), extracellular protease synthesis module (Module II), and extracellular polysaccharide synthesis module (Module III) in B. amyloliquefaciens. In Module I, AprE yield for mutant BA ΔsigF was 25.3% greater than that of BA Δupp. Combining Module I synergistically with mutation of extracellular proteases in Module II significantly increased AprE production by 36.1% compared with production by BA Δupp. In Module III, the mutation of genes controlling extracellular polysaccharides reduced the viscosity and the accumulation of sediment, and increased the rate of dissolved oxygen in fermentation. Moreover, AprE production was 39.6% higher than in BA Δupp when Modules I, II and III were engineered in combination. This study provides modular engineering strategies for the modification of B. amyloliquefaciens for the production of alkaline proteases.

Two new exopolysaccharides from a thermophilic bacterium Geobacillus sp. WSUCF1: Characterization and bioactivities

The production, characterization and bioactivities of exopolysaccharides (EPSs) from a thermophilic bacterium Geobacillus sp. strain WSUCF1 were investigated. Using glucose as a carbon source 525.7 mg/L of exoproduct were produced in a 40-L bioreactor at 60 °C. Two purified EPSs were obtained: EPS-1 was a glucomannan containing mannose and glucose in a molar ratio of 1:0.21, while EPS-2 was composed of mannan only. The molecular weights of both EPSs were estimated to be approximately 1000 kDa, their FTIR and NMR spectra indicated the presence of α-type glycosidic bonds in a linear structure, and XRD analysis indicated a low degree of crystallinity of 0.11 (EPS-1) and 0.27 (EPS-2). EPS-1 and EPS-2 demonstrated high degradation temperatures of 319 °C and 314 °C, respectively, and non-cytotoxicity to HEK-293 cells at 2 and 3 mg/mL, respectively. In addition, both showed antioxidant activities. EPSs from strain WSUCF1 may expand the applications of microorganisms isolated from extreme environments and provide a valuable resource for exploitation in biomedical fields such as drug delivery carriers.

Optimized expression and enhanced production of alkaline protease by genetically modified Bacillus licheniformis 2709

BACKGROUND

Bacillus licheniformis 2709 is extensively applied as a host for the high-level production of heterologous proteins, but Bacillus cells often possess unfavorable wild-type properties, such as production of viscous materials and foam during fermentation, which seriously influenced the application in industrial fermentation. How to develop it from a soil bacterium to a super-secreting cell factory harboring less undomesticated properties always plays vital role in industrial production. Besides, the optimal expression pattern of the inducible enzymes like alkaline protease has not been optimized by comparing the transcriptional efficiency of different plasmids and genomic integration sites in B. licheniformis.

RESULT

Bacillus licheniformis 2709 was genetically modified by disrupting the native lchAC genes related to foaming and the eps cluster encoding the extracellular mucopolysaccharide via a markerless genome-editing method. We further optimized the expression of the alkaline protease gene (aprE) by screening the most efficient expression system among different modular plasmids and genomic loci. The results indicated that genomic expression of aprE was superior to plasmid expression and finally the transcriptional level of aprE greatly increased 1.67-fold through host optimization and chromosomal integration in the vicinity of the origin of replication, while the enzyme activity significantly improved 62.19% compared with the wild-type alkaline protease-producing strain B. licheniformis.

CONCLUSION

We successfully engineered an AprE high-yielding strain free of undesirable properties and its fermentation traits could be applied to bulk-production by host genetic modification and expression optimization. In summary, host optimization is an enabling technology for improving enzyme production by eliminating the harmful traits of the host and optimizing expression patterns. We believe that these strategies can be applied to improve heterologous protein expression in other Bacillus species.

Physical and functional characterization of succinoglycan exopolysaccharide produced by Rhizobium radiobacter CAS from curd sample

Identification and rheological behaviour of succinoglycan exopolysaccharide (EPS) from Rhizobium radiobacter CAS isolated from curd was published in earlier reports. In current investigation physicochemical and functional properties of CAS EPS has been studied. SEC-MALLS revealed molecular weight (Mw), number molecular weight (Mn) and polydispersity index (PDI) of CAS EPS as 4.05×10⁶g·mol^-1, 3.82×10⁶g·mol^-1 and, 1.06 respectively. Thermogravimetric analysis showed the high thermal stability of CAS polymer where approximately 77% of CAS hydrocolloid maintain physical integrity and stability with temperature degradation (T_d) at 290°C. Scanning electron microscopy and particle size analysis confirmed the porous and hygroscopic nature and 2.049μm size of CAS EPS respectively. Equally important functional properties such as water activity (0.55), water solubility (95%), water contact angle (54.83°), water binding capacity (101g/g), water holding capacity (68.19g/g), oil binding ability (soybean and groundnut oils were found 4.35g/g and 3.68g/g) and swelling index (17.5mL/g) were examined for CAS EPS. Prevention of syneresis has been studied at 1% CAS EPS concentration which significantly prohibited the degree of syneresis of starch. These physico-functional properties make CAS EPS a prominent candidate for food processing and product development sector.