Long- and short-range structural characteristics of pea starch modified by autoclaving, α-amylolysis, and pullulanase debranching

Effect of electron beam irradiation pretreatment and different fatty acid types on the formation, structural characteristics and functional properties of starch-lipid complexes

The effects of different electron beam irradiation doses (2, 4, 8 KGy) and various types of fatty acids (lauric acid, stearic acid, and oleic acid) on the formation, structure, physicochemical properties, and digestibility of starch-lipid complex were investigated. The complexing index of the complexes was higher than 85 %, indicating that the three fatty acids could easily form complexes with starch. With the increase of electron beam irradiation dose, the complexing index increased first and then decreased. The highest complexing index was lauric acid (97.12 %), stearic acid (96.80 %), and oleic acid (97.51 %) at 2 KGy radiation dose, respectively. Moreover, the microstructure, crystal structure, thermal stability, rheological properties, and starch solubility were analyzed. In vitro digestibility tests showed that adding fatty acids could reduce the content of hydrolyzed starch, among which the resistant starch content of the starch-oleic acid complex was the highest (54.26 %). The lower dose of electron beam irradiation could decrease the digestibility of starch and increase the content of resistant starch.

Synergistic impact of ultrasound-high pressure homogenization on the formation, structural properties, and slow digestion of the starch-phenolic acid complex

The modification of starch digestibility can be achieved through the formation of complexes with polyphenols. We studied the combined impacts of ultrasound and high-pressure homogenization (UT-HPH) on the structure and in vitro digestibility of rice starch-chlorogenic acid complexes. The development of V-type complexes was supported by our findings, which also showed that synergistic UT-HPH therapy exhibited the highest absorbance value for the complexing index (0.882). Significant alterations in digestibility were also observed in the complexes, with the content of RDS decreasing from 49.27% to 27.06%, the content of slowly SDS increasing from 25.69% to 35.35%, and the percentage of RS increasing from 25.05% to 37.59%. Furthermore, a high positive correlation was found by applying the Pearson correlation coefficient in our research between RS, weight, PSD, and CI. This study presents a sustainable processing approach for utilizing chlorogenic acid in starch-rich food systems.

Structural, physicochemical, and digestive properties of enzymatic debranched rice starch modified by phenolic compounds with varying structures

The physicochemical properties of starch and phenolic acid (PA) complexes largely depend on the effect of non-covalent interactions on the microstructure of starch. However, whether there are differences and commonalities in the interactions between various types of PAs and starch remains unclear. The physicochemical properties and digestive characteristics of the complexes were investigated by pre-gelatinization of 16 structurally different PAs and pullulanase-modified rice starches screened. FT-IR and XRD results revealed that PA complexed with debranched rice starch (DRS) through hydrogen bonding and hydrophobic interaction. Benzoic/phenylacetic acid with polyhydroxy groups could enter the helical cavities of the starch chains to promote the formation of V-shaped crystals, and cinnamic acid with p-hydroxyl structure acted between starch chains in a bridging manner, both of which increased the relative crystallinity of DRS, with DRS-ellagic acid increasing to 20.03 %. The digestion and hydrolysis results indicated that the acidification and methoxylation of PA synergistically decreased the enzyme activity leading to a decrease in the digestibility of the complexes, and the resistant starch content of the DRS-vanillic acid complexes increased from 28.27 % to 71.67 %. Therefore, the selection of structurally appropriate PAs can be used for the targeted preparation of starch-based foods and materials.

Two-step modification of pullulanase and transglucosidase: A novel way to improve the gel strength and reduce the digestibility of rice starch

The multiscale structure, gel strength and digestibility of rice starch modified by the two-step modification of pullulanase (PUL) pretreatment and transglucosidase (TG) treatment for 6, 12, 18 and 24 h were investigated. The debranching hydrolysis of PUL produced some linear chains, which rearranged to form stable crystalline structures, reducing the digestible starch content, but weakening the gel strength. TG treatment connected some short chains to longer linear chains via α-1,6-glycosidic bonds, generating the structures of linear chain with fewer branches. The short branches promoted the interaction between starch molecules to form a more compact three-dimensional gel network structure, showing higher hardness and springiness. Moreover, these chains could form more stable crystals, reducing the digestible starch content, and the increase of branching degree inhibited digestive enzyme hydrolysis, reducing the digestion rate. The multiscale structure of starch tended to stabilize after TG treatment for 18 h, which could form a gel with stronger strength and lower digestibility than native starch gel. Therefore, the two-step modification of PUL and TG was an effective way to change the structure of rice starch to improve the gel strength and reduce the digestibility.

Preparation of starch-palmitic acid complexes by three different starches: A comparative study using the method of heating treatment and autoclaving treatment

Recent research emphasizes the growing importance of starch-lipid complexes due to their anti-digestibility ability, prompting a need to explore the impact of different starch sources and preparation methods on their properties. In this study, starch-palmitic acid (PA) complexes were prepared by three different starches including Tartary buckwheat starch (TBS), potato starch (PTS), and pea starch (PS) by heating treatment (HT) and autoclaving treatment (AT), respectively, and their physicochemical property and in vitro digestibility were systematically compared. The formation of the starch-PA complex was confirmed through various characterization techniques, including scanning electron microscopy, differential scanning calorimetry, Fourier transform infrared spectroscopy, and X-ray diffraction. Among the complexes, the PTS-PA complex exhibited the highest complexation index over 80 %, while the PS-PA complex had the lowest rapid digestible starch content (56.49-59.42 %). Additionally, the complexes prepared by AT exhibited higher resistant starch content (41.95-32.46 %) than those prepared by HT (31.42-32.49 %), while the complexes prepared by HT held better freeze-thaw stability and hydration ability than those prepared by AT. This study highlights the important role of starch sources in the physicochemical and digestibility properties of starch-lipid complex and the potential application of AT in the preparation of novel resistant starch.

Effects of explosion puffing on the native structural organization and oil adsorption properties of starch

The effects of explosion puffing (EP) on the native structural organization (i.e., thermal properties, crystalline structure, short-range order, granule morphology and powder properties) and oil adsorption properties of puffed starch (PS) were investigated. The results showed that EP treatment could decrease the melting enthalpy of starch double helices and increase the V-type crystallinity. The highest V-type crystallinity (24.7 %) was obtained when the puffing pressure was 0.4 MPa and the starch:ethanol:water ratio was 1:2:1 (w/w). By controlling the puffing conditions, EP treatment can alter the morphology, and increase the particle size, flowability and specific surface area of PS. The high amorphous proportion and porous sheet structure of PS resulted in the highest oil adsorption capacity when the starch:ethanol:water ratio was 1:1:1 (w/w). Pearson correlation analysis showed that oil adsorption capacity was significantly and positively correlated with the 1022/995 cm-1 value and V-type crystallinity, but negatively correlated with bulk density and angle of repose. Furthermore, oil retention capacity was strongly dependent on V-type crystallinity. These findings demonstrated that EP is an innovative technology with the potential to enhance the V-type crystallinity and adsorption performance of starch.

Starch/carbon nanofibers bionanocomposites via melt mixing: Effect of dispersion and compatibility on conductivity and mechanical properties

Biodegradable polymers with conductivity and mechanical properties are required in several applications where it is necessary to substitute conductive synthetic plastics due to the high waste produced. In this study, bionanocomposites (BNCs) have been compounded by thermoplastification of rice starch via melt mixing with carbon nanofibers (NPs) and modified NPs (NPs [M]) using plasma of acrylic acid. Spectroscopy analysis, X-ray diffraction, and morphology were studied to elucidate the effect of dispersion and compatibility on the conductivity and mechanical properties. The incorporation of NPs promoted esterification reactions with starch during the melt mixing process, giving rise to changes in its crystal structure. NPs [M] showed better dispersion and compatibility because the plasma prevents reagglomeration and generates a stronger affinity. BNCs showed significative flexibility with remarked % elongation at break from 5.64 % to 248.60 %, and thermal conductivity increased from 0.10 to 0.58 W/m K, with NPs [M] at 5 %. In contrast, the electrical conductivity remained in the same magnitude order (10-4 S/cm). The better compatibility between starch-NPs [M] hinders electronic transport but increases the propagation of phonons to promote thermal conductivity. BNCs fabricated in this study by a dry and scalable process could be of interest in some application areas (intelligent food packing, electronics, textiles, etc.).

Characterization of the physicochemical properties of Lipu Colocasia esculenta (L.) Schott starch: A potential new food ingredient

The physicochemical properties of Lipu taro starch (LTS), cassava starch (CS) and wheat starch (WS) were analyzed. These starches exhibited a comparable starch content (86 %). However, LTS had a significantly lower amylose content (15.93 %) compared to CS (26.62 %) and WS (33.53 %). Moreover, LTS demonstrated an irregular polygonal cubic morphology with a smaller particle size of 2.55 μm while possessed an A-type crystal structure with high crystallinity at 25.07 %. In contrast, CS and WS had larger particle sizes of 13.33 μm and 16.68 μm, respectively, with lower crystallinities of 22.52 % and 20.33 %. Due to these physicochemical properties, LTS exhibited superior emulsification properties with a higher emulsifying activity index of 8.63 m2/g and an emulsion stability index of 69.18 min, whereas CS and WS had values of 2.35 m2/g and 25.15 min, and 0.37 m2/g and 11.48 min, respectively. LTS also demonstrated enhanced thermal stability, characterized by higher gelatinization temperature (indicated by To, Tp, Tc, and ΔT) and reduced paste viscosity (indicated by PV, TV, FV, SBV, and BDV) compared to CS. However, the mechanical strength of the gel made from LTS (indicated by hardness, adhesiveness, springiness, gumminess, and chewiness) was comparatively inferior to those from CS and WS.

Effects of starch multiscale structure on the physicochemical properties and digestibility of Radix Cynanchi bungei starch

Radix Cynanchi bungei (RCb) contains 40-70 % starch, yet little is known about the structure and properties of RCb starch. In this study, the multiscale structure of two cultivars of RCb starch (YW201501 and BW201001) were characterized, and the effects of starch structure on its physicochemical properties were investigated. The differences in physicochemical properties of RCb starch were influenced by its multiscale structure. The starch granules were round and irregular polygon, with sizes ranging between 2 and 14 μm. YW201501 had a higher amylose (21.81 %) and lipid (0.96 %) content, molecular weight (59.5 × 106 g/mol), and A chain proportion (27.5 %), and a lower average granule size (6.14 μm), amylopectin average chain length (19.7), and B3 chain proportion (10.3 %). Both starches were B-type crystalline, with higher crystallinity (26.3 %) and R1047/1022 (0.74) for YW201501, resulting in large gelatinization enthalpy. In addition, the higher peak viscosity and larger retrogradation degree of YW201501 were correlated to its higher amylose content. In vitro digestibility revealed that the low rapidly digestible starch and high resistant starch of BW201001 were related to the fine structure of starch. YW201501 and BW201001 had a medium glycemic index (62.6-66.0) with potential for processing into healthy starchy foods.

Multi-scale structural characteristics of black Tartary buckwheat resistant starch by autoclaving combined with debranching modification

The impact of autoclaving or autoclave-debranching treatments on the multi-scale structure of resistant starch (RS) and the relationship with starch digestion remains unclear, despite their widespread use in its preparation. This work investigated the relationship between RS structure in black Tartary buckwheat and its digestibility by analyzing the effects of autoclaving and autoclave-debranching combined treatments on the multi-scale structure of RS. The results showed that black Tartary buckwheat RS exhibited a more extensive honeycomb-like network structure and enhanced thermal stability than either black Tartary buckwheat native starch (BTBNS) or common buckwheat native starch (CBNS). Autoclaving and autoclaving-debranching converted A-type native starch to V-type and possibly the formation of flavonoid-starch complexes. Autoclaving treatment significantly increased the proportion of short A chain (DP 6-12) and the amylose (AM) content, reduced the viscosity and the total crystallinity. Notably, the autoclave-debranching co-treatment significantly enhanced the resistance of starch to digestion, promoted the formation of perfect microcrystallines, and increased the AM content, short-range ordered degree, and the proportion of long B2 chain (DP 25-36). This study reveals the relationship between the multi-scale structure and digestibility of black Tartary buckwheat RS by autoclaving combined with debranching modification.

Hydrothermal processes and simultaneous enzymatic hydrolysis in the production of modified cassava starches with porous-surfaces

The amylolytic action of α-amylase and amyloglucosidase has been directly implemented in native cassava starches for the formation of cassava microporous granules with unsatisfactory results, however, its incidence in hydrothermally treated granules has never been evaluated. The effect of hydrothermal processes and simultaneous enzymatic hydrolysis on the physicochemical, morphological and structural properties of native cassava starch was evaluated. Native cassava starch presented a rigid, smooth surface, and was exempt from porosities, whereas hydrothermal processes altered the semicrystalline order and increasing the size and number of pores and increasing the size (4.11 ± 0.09 nm) and volume of pores (0.82 ± 0.00 cm3/g × 10-3). The hydrothermal action followed by enzymatic processes with α-amylase and amyloglucosidase, augmented the processes of internal degradation (endo-erosion) and pore widening (exo-erosion), improving the hydrophilic properties compared to the hydrothermal treatment. Likewise, the hydrothermally process followed by enzymatic hydrolysis for 24 h (HPS + EMS-24) increased the degradation of the amorphous lamellae, consistent with a significant decrease in amylose content. This same dual treatment increased the pore size at 17.68 ± 0.13 nm relative to the native counterpart; therefore, they are considered an effective method in the development of modified cassava starches with porous surfaces.

Changes in morphological and structural characteristics of high amylose maize starch in alkaline solution at different temperatures

In this study, high amylose maize starch(HAMS)was treated by Hydrothermal-alkali. SEM, SAXS, XRD, FTIR, LC-Raman, ¹³C CP/MAS NMR, GPC and TGA were used to study the changes in the granules and structure of HAMS. The results show that the granule morphology, lamellar structure, and birefringence of HAMS remained intact at 30 °C and 45 °C. With increasing temperature, the starch granules are fragmented, and the crystallinity, DD, FWHM values, molecular weight, and thermal stability of HAMS decrease. The double helical structure dissociated, and the content of amorphous regions increased, indicating the from order to the disorder of the HAMS structure. A similar annealing behavior occurred in HAMS at 45 °C, with the rearrangement of amylose and amylopectin occurring. At 75 °C and 90 °C, the short-chain starch produced by chain breakage regroups to form an ordered double helix structure. In general, the granule structure level of HAMS was damaged to different degrees at varying temperatures. HAMS showed gelatinization behavior in alkaline solutions when the temperature is 60 °C. This study expects to provide a model for the gelatinization theory of HAMS systems.

Preparation and characterization of debranched starches: Influence of botanical source and debranching time

The influence of botanical source (waxy corn, glutinous rice, tapioca and potato), either based on crystallization or morphology, and the debranching time (6-48 h) on the physicochemical properties of debranched starches (DBSs) were systematically investigated. The divergence of depolymerization among different botanical sources within same hydrolysis time suggested that the debranching treatment was not only depending on the molecular profile and crystalline structure, but also related with the granular size and morphology of native starches. Fourier transformation infrared spectroscopy (FT-IR), X-ray diffraction (XRD), differential scanning calorimetry (DSC) suggested that long-term debranching reaction produced DBSs with improved degree of crystallization and reduced iodine binding capacity. Simulated in-vitro digestion assay showed that the proportion of digestive fractions from different botanical originated DBSs differed greatly. Additionally, prolonging the debranching time yielded increased level of resistant starch. The study may provide guidance for exploring DBSs with various molecular weight to fulfill their tailored applications.

Increasing the pressure during high pressure homogenization regulates the starch digestion of the resulting pea starch-gallic acid complexes

The pea starch-gallic acid (PS-GA) complexes were prepared using high pressure homogenization (HPH), then the effect and underlying mechanism of pressure on multi-scale structure and digestibility of complexes were investigated. Results showed that HPH promoted the formation of PS-GA complexes, reaching the maximum complex index of 7.74 % at the pressure of 90 MPa, and the main driving force were hydrophobic interactions and hydrogen bonding. The interaction between PS and GA facilitated the formation of surface reticular structures to encapsulate gallic acid molecules, further entangled into bigger size aggregates. The enhancement of rearrangement and aggregation of starch chains during HPH developed a dense hierarchical structure of PS-GA complexes, including short-range ordered structure, V-type crystal structure, lamellar and fractal structure, thus increasing gelatinization temperature. The digestibility of PS-GA complexes substantially changed in reducing rapidly digestible starch content from 29.67 % to 17.07 %, increasing slowly digestible starch from 53.69 % to 56.25 % and resistant starch from 16.63 % to 26.67 %, respectively. Moreover, the resulting complexes exhibited slower digestion rates compared with native PS. Furthermore, the regulating mechanism of pressure during HPH on starch digestibility was the formation of ordered multi-scale structure and inhibition of GA on digestive enzymes.

Multiscale structure and precipitation mechanism of debranched starch precipitated by different alcohols

Alcohol solution is a cheap, simple, and effective precipitating solvent frequently used for separating debranched starch (DBS), yet little is known about the precipitation mechanism of DBS by different alcohols. This study precipitated DBS from pullulanase-hydrolyzed starch using ethanol, n-butanol, and isopentanol. The multiscale structures of DBS were characterized, including chain length, single/double helix, and crystalline. The chain conformation and precipitation mechanism of DBS in different alcohols was investigated using molecular dynamics (MD) simulation. DBS precipitated by n-butanol contained the largest proportion of short chain (DP6-24, 83.2 %), the highest V-type crystallinity (21.1 %), and the largest single-helix content (24.7 %). A single helix conformation of DBS chain was determined in alcohols, where alcohol molecules entered the helix cavity. Intra/inter-molecular hydrogen bonds stabilized the helix, with a large number of hydrogen bonds leading to strong molecular interaction and stable helical structure. The solvent accessible surface area of DBS chain decreased by 7.88-19.32 % in alcohols, and the radial distribution function revealed that the first solvent layer of DBS chain at 0.29 nm was closely related to hydrogen bonding. This study provides a basis for the choice of precipitation solvent for preparing DBS with different chain lengths and physicochemical properties.

Horizontal gene transfer: Driving the evolution and adaptation of plants

Horizontal gene transfer greatly contributes to the diversification and long-term evolution of green plants. Recent studies suggest that horizontal gene transfer events drove the evolution and adaptation of charophyte green algae and land plants.

Structural, physicochemical and digestive properties of rice starch modified by preheating and pullulanase treatments

The structural, physicochemical and digestive properties of rice starch modified by the combination of different temperature (60, 70, 80, 90 and 100 °C) preheating and pullulanase (PUL60, PUL70, PUL80, PUL90 and PUL100) treatments were investigated. The PUL60 treatment mainly modified the surface layer of starch granules, which increased the amylose content and damaged some ordered structures, resulting in slight decreases of gel strength and estimated glycemic index (eGI). With the increase of preheating temperature, PUL could act on more enzymatic sites to release a large amount of linear chains, reduce the ordered degree, and transform the A-type crystalline structure into B-type. The low molecule interaction strength between linear chains weakened the gel network structure, and some stable crystal structures formed by longer chains resisted the enzyme digestion. The gel strength and eGI value of PUL70 starch decreased significantly, and the properties of PUL80-100 starches tended to be stable, showing a further significant decrease of gel strength and a slight reduction of eGI value. Therefore, the preheating treatments at 60, 70 and 80 °C were suitable for the PUL modification of rice starch to obtain strong, medium and weak gel strength respectively, and the digestibility decreased with increasing preheating temperature.

Physicochemical Characterizations, Digestibility, and Lipolysis Inhibitory Effects of Highland Barley Resistant Starches Prepared by Physical and Enzymatic Methods

This study aimed to investigate the differences in the physicochemical and structural characteristics, digestibility, and lipolysis inhibitory potential in vitro of highland barley resistant starches (HBRSs) prepared by autoclaving (HBSA), microwave-assisted autoclaving (HBSM), isoamylase (HBSI) and pullulanase (HBSP) debranching modifications. Results revealed that the resistant starch content of native starch was significantly elevated after modifications. HBSA and HBSM showed distinctly higher swelling power and water-binding capacities along with lower amylose amounts and solubilities than those of HBSI and HBSP (p < 0.05). Fourier transform infrared spectroscopy and X-ray diffraction exhibited that HBSP displayed the highest degree of the ordered crystalline region and crystallinity with a mixture of C_B- and V-type polymorphs. Meanwhile, HBSA and HBSM were characterized by their high degree of the amorphous region with a mixture of B- and V-type polymorphs. Physical and enzymatic modifications resulted in different functionalities of HBRSs, among which HBSP showed the lowest digestibility and HBSM exhibited the highest inhibitory activity on lipolysis due to their structure and structure-based morphology and particle size. This study provided significant insights into the development of native starch from highland barley as an alternative functional food.

Effect of Pullulanase Debranching Time Combined with Autoclaving on the Structural, Physicochemical Properties, and In Vitro Digestibility of Purple Sweet Potato Starch

The effects of pullulanase debranching combined with autoclaving (PDA) at various debranching times (0 h, 5 h, 10 h, 15 h, 20 h, and 25 h) and 121 °C/20 min of autoclave treatment on the structural and physicochemical characteristics of purple sweet potato (Jinshu No.17) starch were investigated. The results indicated that the native starch (NS) was polygonal, round, and bell-shaped with smooth surfaces. After debranching treatment, the surface of the starch samples became rough and irregular. The molecular weight became smaller after treatments. X-ray diffraction C-type pattern was transformed into a B-type structure in treated samples with increased relative crystallinity. ¹³C NMR indicated an increased propensity for double helix formation and new shift at C1, 3, 5 region compared to NS. The apparent amylose content was 21.53% in the NS. As the swelling power decreased, the percentage of soluble solids increased and different thermal properties were observed. A higher yield of the resistant starch (RS) was observed in all treated starch except PDA 25 h. The findings of our study reveal that a combination of pullulanase debranching time (15 h) and autoclaving (121 °C for 20 min) is a great technique that can be used to produce a higher amount of resistant starch in the Jinshu No.17 starch.

Physicochemical, structural, and digestive properties of pea starch obtained via ultrasonic-assisted alkali extraction

As a new and clean extraction technology, ultrasonic extraction has been demonstrated with great potential in the preparation of modified starch. In order to increase its added value, it is necessary to modify pea starch to enlarge its application. In this study, the efficiency of combining ultrasonic with alkali in the extraction of pea starch was evaluated and compared to conventional alkali extraction. Ultrasonic-assisted alkali extraction conditions were optimized using single-factor experiments and response surface methodology. The results revealed that maximum yield of pea starch (54.43 %) was achieved using ultrasound-assisted alkali extraction under the following conditions: sodium hydroxide solution with a concentration of 0.33 %, solid/alkali solution ratio of 1:6 (w/v), ultrasonic power of 240 W, temperature of 42 °C, and extraction time of 22 min. The ultrasound-assisted alkali extraction yielded 13.72 % greater pea starch than conventional alkali extraction. On the other hand, morphological, structural, and physicochemical properties of the obtained starch isolates were evaluated. The ultrasound-assisted alkali extraction resulted in pea starch with greater amylose content, water-solubility, swelling power, and viscosity compared with conventional alkali extraction. Furthermore, ultrasonication influenced the morphological properties of pea starch granules, while the molecular structure and crystal type were not affected. Moreover, the ultrasonic-assisted extraction produced starch with a slightly greater resistant starch content. Therefore, ultrasonic-assisted extraction can be suggested as a potential method for extracting pea starch with improved functional properties.

How to synchronously slow down starch digestion and retrogradation: A structural analysis study

Digestibility and retrogradation properties of starch are important for the nutrition and quality of starch-based foods. In this study, a new idea on the synchronous delay the starch digestion and retrogradation was proposed, and the regulation mechanism was explored from perspectives of structural evolution using ¹³C NMR, XRD and SAXS techniques as well as the molecular dynamics simulations. Results showed that the chestnut starch treated with hot extrusion and 8% catechins (HE-8% CA)## could reach highest anti-retrogradation rate (AR 76.63%) and lowest rapidly digestible starch content (RDS 64.55%) at day 24. The starch digestion was slowed down by increasing single/double helix, V-type crystallinity and compactness of aggregates, while retrogradation process was suppressed by inhibiting the packing of short-range ordered structure into long-range ordered structure. The hydrogen bonding and van der Waals forces were the main driving force for the interactions between flavonoid polyphenols and starch molecules. Overall, this study is instructive for further investigations on the synchronous modulation of functional properties of starch.

Effect of lactobacteria fermentation on structure and physicochemical properties of Chinese yam starch (Dioscorea opposita Thunb.)

Biotransformation is an effective technique to modify the structure and physicochemical properties of carbohydrates. In this work, Chinese yam (Dioscorea opposita Thunb.) starch was fermented by lactobacteria. The effect of fermentation time (6, 12, 30, 42 and 72 h) on structure and physicochemical properties of Chinese yam starch were investigated. The microstructure was destroyed after lactobacteria fermentation for 42 and 72 h. The X-ray diffraction pattern of Chinese yam starch indicated a transformed A to A + V crystalline type. → 4)-α-d-glucose-(1 → from backbone and unreduced terminal α-d-glucose-(1 → 4 from branch were identified by NMR spectra, and free glucose was only detected in fermented starch at 72 h. With the extension of fermentation time, the crystallinity and thermal parameters increased within 42 h and thereafter decreased. M_w, M_w/M_n, long chains of DP25-36 and DP ≥ 37, peak viscosity, trough viscosity, finally viscosity and setback presented a reverse trend.

The relationship between linear chain length distributions of amylopectin and the functional properties of the debranched starch-based films

The relationship between linear chain length distributions and the functional properties of the starch-based films after pullulanase debranching treatment of corn (CS), rice (RS) and wheat (WS) were investigated. The results indicated that the film thickness was negatively correlated with A chains content (r = -0.939) and apparent amylose content (r = -0.926), and was positively correlated with B3 chains content (r = 0.847). The tensile strength of the debranched starch-based films were positively correlated with apparent amylose content (r = 0.813), and the elongation at break were inversely proportional to B3 chains content (r = -0.817). The hydrophobicity of the starch-based films was positively and negatively correlated with the proportions of linear chains with DP 6-12 (r = 0.892) and DP 25-36 (r = -0.863), respectively. On the contrary, no significant correlation was noticed between chain length distribution of amylopectin and transparency and thermal stability.

Insights into the formation and digestive properties of lotus seed starch-glycerin monostearate complexes formed by freeze-thaw pretreatment and microfluidization

The objective of this paper was to investigate the formation and digestive properties of lotus seed starch-glycerin monostearate complexes (LSG) formed by freeze-thaw pretreatment and microfluidization. The results showed that the preparation of LSG with six freeze-thaw cycles at 60 MPa had the highest complex index (69.92%). The formation of LSG led to the conversion of the crystalline pattern of lotus seed starch from C-type to V-type and increased the proportion of the microcrystalline region. In addition, the digestive results indicated that LSG had a high resistance to digestive enzymes, which was conducive to increasing the content of resistant starch. Based on the above investigation, the formation and digestive properties showed that the appropriate number of freeze-thaw cycles of pretreatment could facilitate the complexation of starch and lipid under low-pressure microfluidization, which made for the directional regulation of helical conformation and anti-digestion.

Processing, digestion property and structure characterization of slowly digestible gorgon nut starch

Slowly digestible gorgon nut starch (GN-SDS) was prepared by heating-cooling treatment (HCT), meanwhile its morphological and structural features were characterized in detail by SEM, DSC, XRD and IR detection. The optimized parameters of GN-SDS processing were as following: starch milk (20%) was heated at 100 °C for 20 min, and then cooled under 4 °C for 24 h. Under the optimized parameters, the SDS content increased from 20.49 to 61.74%. GN-SDS showed typical SDS characteristics in in vivo digestion with a low postprandial blood glucose. SEM images suggested that GN-S particles changed from uniform regular polyhedron with smooth surface to irregular gravel-like particles with coarse surface and obvious layered structure inside after HCT. The results of SEM, DSC, XRD and IR determination indicated that HCT changed the granule morphology, interior structure, gelatinization temperature and crystal type (A to B-type) of GN-S, and therefore made it hard to be digested accordingly.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10068-021-01007-6.

Exploring differences in the physicochemical, functional, structural, and pasting properties of banana starches from dessert, cooking, and plantain cultivars (Musa spp.)

Banana starch, with its nutritional and functional properties, opens up new opportunities for the food industry, which is seeking new starch sources to fulfil rising demand. Herein, physico-chemical, and functional properties of banana starches isolated from dessert, plantain, and cooking cultivars were investigated. Starch yield was higher in Popoulu (30.58%) and Monthan (27.82%). Starch granules registered irregular forms with granule sizes ranging from 8.9 to 55.09 μm. Among the cultivars, the amylose content was ranged between 25.05 and 31.86%. Total starch (95.86 and 95.60%,) and resistant starch (65.56 and 59.20%) were higher in Saba and Monthan respectively. Flour colour index (86.2-90.6) was higher in banana starches. Differential scanning calorimetry and rapid viscosity studies confirmed that starches from Saba (87.67 and 85.71 °C) Monthan (85.36 and 81.65 °C) have a higher gelatinization property. Banana starches were B and C-type with varying crystallinity levels (21.19-52.01%). The in-vitro starch digestibility revealed that Saba starch has a lower hydrolysis rate with lesser glycemic index. PCA showed the greater impact of amylose and resistant starch content on the grouping of varieties. These findings would be useful for food and non-food industries in terms of using banana starch in various food compositions and other industrial applications.

Pullulanase modification of granular sweet potato starch: Assistant effect of dielectric barrier discharge plasma on multi-scale structure, physicochemical properties

This study explored the potential application of physical combined enzyme treatment to modify starch granules. Starch was modified by exposure to cold plasma (CP) for 1, 3, and 9 min and to pullulanase (PUL) for 12, 24, and 36 h. Individual treatments with CP and PUL somewhat modified starch structure and physicochemical properties. Nevertheless, compared with native starch and individual treatments, CP-PUL combined treatment significantly (p < 0.05) promoted the subsequent structural modification, increased the short-chain ratio and the amylose content, reduce the molecular weight and the relative crystallinity, and disturb the short-range order. CP also improved the properties of PUL-modified starch, including enhanced solubility, thermal properties and resistance to enzymatic hydrolysis but worsened swelling power and peak viscosity properties. This research provides a new perspective for the rational application of CP-PUL co-treated starch in the food industry.

Effects of microwave treatments and retrogradation on molecular crystalline structure and in vitro digestibility of debranched mung-bean starches

The objective of this study was to investigate morphology, molecular crystalline structure, and digestibility of debranched mung bean starches with or without microwave treatment and retrogradation at different temperature. The mung bean starch was firstly debranched with pullulanase, and then the debranched starch containing 20% moisture content was treated by microwave irradiation for 3 min with or without further retrograded at +25, +4, or -18 °C for 24 h. All treated starches exhibited the B + V-type crystalline polymorph as determined by the XRD and the ¹³CNMR. The FT-IR results showed that the debranched starches had lower degree of order but higher degree of double helix than those of the native starch. The microwave treatment or further recrystallization of the debranched starch for more 24 h significantly improved crystalline structure of starch granules with higher degree of relative crystallinity, degree of order, and degree of double helices. The resistant starch content of the treated starch was in a range of 39.7-52.8%, significantly higher than that of the native starch (15.6%). As a result, the microwave-assisted debranched starch with further crystallization for 24 h was found to have highly ordered structure of granules, which highly resisted to the enzyme digestion.

Functional Properties and Structural Characteristics of Starch-Fatty Acid Complexes Prepared at High Temperature

The effects of fatty acid type (myristic, palmitic, stearic, oleic, linoleic, and linolenic acid) on the characteristics of starch-lipid complexes under high temperature were investigated. Fatty acids with a shorter carbon chain or a greater number of double bonds contributed to the formation of V-type starch-lipid complexes. The thermostability of starch-unsaturated fatty acid (UFA) complexes prepared at high temperature was increased compared with those obtained at lower temperature. Resistant starch (RS) contents and melting temperatures had a strong significant positive correlation. Complexes with better thermostability were more resistant to enzymatic hydrolysis. Among them, the starch-stearic acid complexes possessed the highest RS content. The paste of starch-linolenic acid complexes had the lowest internal friction and the strongest thixotropy. The broken of double bonds in UFAs probably accounted for the increased starch-lipid complexes. The crystalline, thermal, rheological, and digestion properties of samples treated at high temperature were significantly affected.

Physicochemical and multi-scale structural alterations of pea starch induced by supercritical carbon dioxide + ethanol extraction

The objective of this study was to establish the impacts of supercritical fluid extraction (SFE) processing on the physicochemical properties of pea flour and the structure of isolated pea starch. A significant (p < 0.05) increase in protein content and reduction in several pasting and thermal parameters as measured by rapid visco-analyzer and differential scanning calorimeter were observed after SFE. Additionally, SFE increased starch digestibility as determined by an in vitro starch digestion assay. An increased amylopectin content and crystallinity along with the loss of double helix content was supported by size exclusion chromatography and FT-IR data, respectively. X-ray diffraction and scanning electron microscopy showed minimal alterations of starch, by SFE, in long-range crystalline and morphological structure of starch granules, respectively. The data demonstrated SFE influenced the physicochemical and structural characteristics of pea starch. These outcomes illustrated that SFE might be a green and novel technology for starch modification.

Isolated Pea Resistant Starch Substrates with Different Structural Features Modulate the Production of Short-Chain Fatty Acids and Metabolism of Microbiota in Anaerobic Fermentation In Vitro

Resistant starches (RSs) with different structural features were isolated from both native and pullulanase-debranched and acid-hydrolyzed pea starches. Their microscopic changes, short-chain fatty acids (SCFA) composition, microbiota communities, and structural characteristics of the corresponding fermenta residues by the end of 24 h of the in vitro fermentation period were investigated. The microbial fermentation clearly caused numerous cracks and erosion on the RS granule surface. In comparison to the positive control, significantly higher levels of butyrate, propionate, and total SCFA were produced after 24 h of in vitro fecal fermentation when resistant starches were used as substrates. The RS substrates with different structural characteristics enabled varying growth of Bifidobacterium spp., Eubacterium spp., and Faecalibacterium spp. The discrepancy in microbiota communities associated with the differences in SCFA from the fermentation of RS with different structural features would be critical toward the rational design of foods containing resistant starch with targeted health benefits.

Effects of freeze-thaw pretreatment on the structural properties and digestibility of lotus seed starch-glycerin monostearin complexes

To investigate the effects of freeze-thaw cycle pretreatment (in one cycle, frozen samples were reheated to 50 °C and then frozen at -20 °C) on the structural properties and digestibility of lotus seed starch-glycerin monostearin complexes, their complex index, crystal structure, molecular structure, micro-morphology, and digestibility were analyzed. The results showed that an appropriate number of freeze-thaw cycles facilitated the helical assembly of lotus seed starch and glycerin monostearin. Specifically, six cycles of freeze-thaw pretreatment were favorable for forming V_6I-type complexes with high microcrystalline proportion. This contributed to the high stability of crystalline region and order arrangement of molecular structure. Moreover, V_6I-complexes were in the form of lamellar debris in micro-morphology, and their total digestion and digestion rates were lower than those of other samples. These results were of significance for developing slowly digesting lotus seed starch-based food.

Adaptive innovation of green plants by horizontal gene transfer

Horizontal gene transfer (HGT) refers to the movement of genetic material between distinct species by means other than sexual reproduction. HGT has contributed tremendously to the genome plasticity and adaptive evolution of prokaryotes and certain unicellular eukaryotes. The evolution of green plants from chlorophyte algae to angiosperms and from water to land represents a process of adaptation to diverse environments, which has been facilitated by acquisition of genetic material from other organisms. In this article, we review the occurrence of HGT in major lineages of green plants, including chlorophyte and charophyte green algae, bryophytes, lycophytes, ferns, and seed plants. In addition, we discuss the significance of horizontally acquired genes in the adaptive innovations of green plants and their potential applications to crop breeding and improvement.

Dual modification of various starches: Synthesis, properties and applications

The problems associated with native starches (NSs) and single modified starches were stated in order to justify dual modification of various starches. Broadly, there are two types of dual modification, i.e., homogeneous dual modification and heterogeneous dual modification. The combination of two physical modifications, e.g., (extrusion/annealing); two chemical modifications, e.g., (succinylation/cross-linking) and two enzymes modification (α-amylase/pullulanase) falls under the former classification and the latter classification is the combination of two of each of the differently stated modifications, e.g., acetylation/annealing, extrusion/succinylation, and microwave-assisted phosphorylation, etc. The classification, synthesis, properties and applications of dually modified starches were discussed. There is an attempt to elucidate the problems of each of the single modification in order to justify dual modifications. In dual modifications, the order of reactions, the reaction conditions, the medium of reaction, and the botanical sources of the various starches are very important parameters.