Production of electrospun nanofibers based on graphene oxide/gum Arabic

Fabrication and characterization of xanthan gum nanofibers reinforced with thiosemicarbazide: adsorption of Pb2+ from an aqueous medium

In this study, electrospinning was used to fabricate xanthan gum (XF) and thiosemicarbazide/xanthan gum (TXF) nanofibers crosslinked with ferric ions for effective Pb2+ adsorption. The produced nanofibers were investigated using several physicochemical methods. Both XF and TXF demonstrated thermal stability up to 800 °C, with mass losses of 79% and 75%, respectively. TXF had a surface area of 153.4 m2 g-1 and point of zero charge at pH 6.7. ATR-FTIR analysis revealed the existence of surface chemical functional groups such as -NH2, -NH, and -C[double bond, length as m-dash]S owing to thiosemicarbazide reinforcement. XF and TXF displayed maximum adsorption capacities of 211.65 and 289.18 mg g-1 at pH 6, 2.0 g L-1 nanofiber dose, 22 °C, and after 40 min of contact shaking time. The adsorption process was investigated using several nonlinear adsorption models as well as by desorption and reusability investigations. Thermodynamics examination demonstrated the spontaneous, endothermic physisorption of Pb2+ onto XF and TXF. Ethylenediaminetetraacetic acid was selected as the most efficient eluent for Pb2+ removal from the nanofiber surfaces, with desorption efficiencies of 100% and 97% for XF and TXF, respectively. TXF and XF revealed remarkable sustainability, with reductions in adsorption capacities of only 7% and 12% of the initial removal efficiency after 10 cycles of adsorption/desorption, respectively. As a solid adsorbent for the removal of heavy metal cations, the produced TXF nanofiber demonstrated great sustainability and environmental friendliness.

Fabrication, Characterization, and Microbial Biodegradation of Transparent Nanodehydrated Bioplastic (NDB) Membranes Using Novel Casting, Dehydration, and Peeling Techniques

NDBs were fabricated from gum Arabic (GA) and polyvinyl alcohol (PVA) in different ratios using novel techniques (casting, dehydration, and peeling). The GA/PVA blends were cast with a novel vibration-free horizontal flow (VFHF) technique, producing membranes free of air bubble defects with a homogenous texture, smooth surface, and constant thickness. The casting process was achieved on a self-electrostatic template (SET) made of poly-(methyl methacrylate), which made peeling the final product membranes easy due to its non-stick behavior. After settling the casting of the membranous, while blind, the sheets were dried using nanometric dehydration under a mild vacuum stream using a novel stratified nano-dehydrator (SND) loaded with P2O5. After drying the NDB, the dry, smooth membranes were peeled easily without scratching defects. The physicochemical properties of the NDBs were investigated using FTIR, XRD, TGA, DTA, and AFM to ensure that the novel techniques did not distort the product quality. The NDBs retained their virgin characteristics, namely, their chemical functional groups (FTIR results), crystallinity index (XRD data), thermal stability (TGA and DTA), and ultrastructural features (surface roughness and permeability), as well as their microbial biodegradation ability. Adding PVA enhanced the membrane's properties except for mass loss, whereby increasing the GA allocation in the NDB blend reduces its mass loss at elevated temperatures. The produced bioplastic membranes showed suitable mechanical properties for food packaging applications and in the pharmaceutical industry for the controlled release of drugs. In comparison to control samples, the separated bacteria and fungi destroyed the bioplastic membranes. Pseudomonas spp. and Bacillus spp. were the two main strains of isolated bacteria, and Rhizobus spp. was the main fungus. The nano-dehydration method gave the best solution for the prompt drying of water-based biopolymers free of manufacturing defects, with simple and easily acquired machinery required for the casting and peeling tasks, in addition to its wonderful biodegradation behavior when buried in wet soil.

Graphene Incorporated Electrospun Nanofiber for Electrochemical Sensing and Biomedical Applications: A Critical Review

The extraordinary material graphene arrived in the fields of engineering and science to instigate a material revolution in 2004. Graphene has promptly risen as the super star due to its outstanding properties. Graphene is an allotrope of carbon and is made up of sp²-bonded carbon atoms placed in a two-dimensional honeycomb lattice. Graphite consists of stacked layers of graphene. Due to the distinctive structural features as well as excellent physico-chemical and electrical conductivity, graphene allows remarkable improvement in the performance of electrospun nanofibers (NFs), which results in the enhancement of promising applications in NF-based sensor and biomedical technologies. Electrospinning is an easy, economical, and versatile technology depending on electrostatic repulsion between the surface charges to generate fibers from the extensive list of polymeric and ceramic materials with diameters down to a few nanometers. NFs have emerged as important and attractive platform with outstanding properties for biosensing and biomedical applications, because of their excellent functional features, that include high porosity, high surface area to volume ratio, high catalytic and charge transfer, much better electrical conductivity, controllable nanofiber mat configuration, biocompatibility, and bioresorbability. The inclusion of graphene nanomaterials (GNMs) into NFs is highly desirable. Pre-processing techniques and post-processing techniques to incorporate GNMs into electrospun polymer NFs are precisely discussed. The accomplishment and the utilization of NFs containing GNMs in the electrochemical biosensing pathway for the detection of a broad range biological analytes are discussed. Graphene oxide (GO) has great importance and potential in the biomedical field and can imitate the composition of the extracellular matrix. The oxygen-rich GO is hydrophilic in nature and easily disperses in water, and assists in cell growth, drug delivery, and antimicrobial properties of electrospun nanofiber matrices. NFs containing GO for tissue engineering, drug and gene delivery, wound healing applications, and medical equipment are discussed. NFs containing GO have importance in biomedical applications, which include engineered cardiac patches, instrument coatings, and triboelectric nanogenerators (TENGs) for motion sensing applications. This review deals with graphene-based nanomaterials (GNMs) such as GO incorporated electrospun polymeric NFs for biosensing and biomedical applications, that can bridge the gap between the laboratory facility and industry.

Development of Multiscale Composite with Hybrid Natural Nanofibers

Natural nanofibers are widely used in the field of medicine, but the low strength of these nanofibers is one of the major concerns. A number of factors, importantly the composition, affect the strength of natural nanofibers. The purpose of the current study is to ascertain the effect of the composition of natural nanofibers on the strength of hybrid composites formed using these nanofibers. Hybrid composites formed using 32% volume glass fibre with optimized volume fraction of 0.5% of pure Cellulose Acetate (CA), and 0.5% CA + Hemp Seed (HS) for this study to carry out the analysis. Hybrid composites were produced with vacuum-assisted resin transfer molding (VARTM) by collecting natural nanofibers, produced using the electrospinning process, over glass fiber mats. The electrospinning process was carried out with 12 kV, 10 cm tip to the collector gap, and 12% concentration of the solution. The tensile strength of the hybrid composites was measured using the universal testing machine (UTM). The results showed that the diameter of the electrospun nanofiber varied between 50 and 1400 nm and was affected by solution concentration, voltage, tip-to-collector distance, flow rate, and inclusion of HS in CA. The inclusion of HS in CA, for all compositions, decreased the fiber diameter and caused the formation of beads prominently at higher concentrations. Hybrid composites formed from nanofibers produced using CA and HS showed higher elastic modulus (232 MPa) and tensile strength (20.4 GPa) as compared with nanofibers produced using CA only (elastic modulus = 110 MPa and 13.7 GPa).

Graphene Oxide and Biomolecules for the Production of Functional 3D Graphene-Based Materials

Graphene and its derivatives have been widely employed in the manufacturing of novel composite nanomaterials which find applications across the fields of physics, chemistry, engineering and medicine. There are many techniques and strategies employed for the production, functionalization, and assembly of graphene with other organic and inorganic components. These are characterized by advantages and disadvantages related to the nature of the specific components involved. Among many, biomolecules and biopolymers have been extensively studied and employed during the last decade as building blocks, leading to the realization of graphene-based biomaterials owning unique properties and functionalities. In particular, biomolecules like nucleic acids, proteins and enzymes, as well as viruses, are of particular interest due to their natural ability to self-assemble via non-covalent interactions forming extremely complex and dynamic functional structures. The capability of proteins and nucleic acids to bind specific targets with very high selectivity or the ability of enzymes to catalyse specific reactions, make these biomolecules the perfect candidates to be combined with graphenes, and in particular graphene oxide, to create novel 3D nanostructured functional biomaterials. Furthermore, besides the ease of interaction between graphene oxide and biomolecules, the latter can be produced in bulk, favouring the scalability of the resulting nanostructured composite materials. Moreover, due to the presence of biological components, graphene oxide-based biomaterials are more environmentally friendly and can be manufactured more sustainably compared to other graphene-based materials assembled with synthetic and inorganic components. This review aims to provide an overview of the state of the art of 3D graphene-based materials assembled using graphene oxide and biomolecules, for the fabrication of novel functional and scalable materials and devices.

Gums-based engineered bio-nanostructures for greening the 21st-century biotechnological settings

Naturally occurring plant-based gums and their engineered bio-nanostructures have gained an immense essence of excellence in several industrial, biotechnological, and biomedical sectors of the modern world. Gums derived from bio-renewable resources that follow green chemistry principles are considered green macromolecules with unique structural and functional attributes. For instance, gum mostly obtained as exudates are bio-renewable, bio-degradable, bio-compatible, sustainable, overall cost-effective, and nontoxic. Gum exudates also offer tunable attributes that play a crucial role in engineering bio-nanostructures of interest for several bio- and non-bio applications, e.g., food-related items, therapeutic molecules, sustained and controlled delivery cues, bio-sensing constructs, and so on. With particular reference to plant gum exudates, this review focuses on applied perspectives of various gums, i.e., gum Arabic, gum albizzia, gum karaya, gum tragacanth, and gum kondagogu. After a brief introduction with problem statement and opportunities, structural and physicochemical attributes of plant-based natural gums are presented. Following that, considerable stress is given to green synthesis and stabilization of gum-based bio-nanostructures. The final part of the review focuses on the bio- and non-bio related applications of various types of gums polysaccharides-oriented bio-nanostructures.

Bio nanocomposites of graphene oxide with carboxymethyl guargum: fabrication and characterization and application for type 1 diabetes

Islet cells transplantation has limitations like low survivability, which can be overcome by using extracellular matrix mimicking three-dimensional (3D) scaffolds, which supports the growth and proliferation of seeded cells. This study was aimed to investigate the role of novel 3D carboxymethyl guargum (CMGG) nanocomposite with reduced graphene oxide (rGO) for proliferation of pancreatic islet cells (RIN-5F) and rate of insulin secretion of RIN-5F cells. Scanning electron microscope and Fourier transform infrared results have demonstrated good porosity and the chemical interactions between CMGG and rGO. Mechanical testing and thermogravimetric analysis of nanofibers have shown good tensile strength and thermal stability with rGO in the nanocomposite. These scaffolds demonstratedin vitrobiocompatibility with acceptable ranges of biodegradability and hemocompatibility. Thein vitrocell proliferation and viability of RIN-5F cells on 3D CMGG nanofibers have significantly increased compared to two-dimensional (2D) cell control. Moreover, the glucose dependent insulin secretion of RIN-5F cells on CMGG nanocomposite has significantly increased upto 4-5 folds than cells on 2D cell control. The biomaterials used in this 3D nanofiber scaffold have shown to be biodegradable and hemocompatible and can be a promising platform for the proliferation and secretion of insulin from beta cells and can be effectively used in transplantation type-1 diabetes.

Nanofibrous scaffolds of carboxymethyl guargum potentiated with reduced graphene oxide for in vitro and in vivo wound healing applications

Nanofiber scaffolds mimic the extracellular matrix (ECM) and help in fibroblasts proliferation which is the main constituent for wound healing. This study aims to evaluate the wound healing potential of electrospun nanofibers fabricated by carboxymethyl guargum (CMGG), reduced graphene oxide (rGO) and polyvinyl alcohol. The nanofibers have shown desired properties like excellent porosity and good water holding capacities. The porosity of nanofibers helps in the movement of oxygen to cells and the removal of waste materials and the swelling capacity helps to maintain the moisture content at the wound site. In addition, the in vitro hemocompatibility and wound healing assay have shown excellent results rendering the nanofibers biocompatible. The in vitro fibroblasts (3T3-L1) proliferation was significantly more in rGO/CMGG/PVA nanofibers than CMGG/PVA and cell control. Further, the in vivo wound healing evaluation of these nanofiber dressings in rabbits has shown significant wound closure compared to control and standard. Histology studies revealed the fast collagen formation and re-epithelialization necessary for wound healing among rGO/CMGG/PVA treated rabbits. Therefore, the rGO/CMGG/PVA nanofiber scaffolds can be potential wound dressing candidates and be further evaluated for clinical use.

Bioengineering for curcumin loaded carboxymethyl guargum/reduced graphene oxide nanocomposites for chronic wound healing applications

Biomimetic scaffolds engineering for improved collagen, epithelial cutaneous and fibrous tissue regeneration remains challenging for wound healing. To address these issues, this study aimed to report on the fabrication and characterization of electrospun of carboxymethyl guargum (CMGG), reduced graphene oxide (rGO) nanocomposite dressings loaded with curcumin for chronic wound healing applications. SEM and XRD examined the morphology of nanofibers and resulted in excellent porosity. TGA and FT-IR were done, which revealed the nanofibers' thermal and chemical interactions. CMGG, rGO nanocomposite with curcumin was investigated for in-vitro wound healing assay by scratch wound healing model using 3T3 L1 fibroblast cell lines and conducted in vitro drug-releasing studies. These nanocomposites showed 100% wound closure by the proliferation of fibroblast cell lines 3T3-L1 within 48 h and showed controlled drug release. Further, in vivo results also showed that the CMGG, rGO nanocomposite with curcumin has the potential wound healing effects. Histological studies showed that the CMGG, rGO nanocomposite with curcumin has the potential for wound healing, which indicates that the biomimetic CMGG nanofibers have an excellent healing effect on chronic wounds.

Electrospun polyvinyl-alcohol/gum arabic nanofibers: Biomimetic platform for in vitro cell growth and cancer nanomedicine delivery

The design of powerful in vitro cell culture platforms to support precision medicine can contribute to predict therapeutic success of cancer patients. Electrospun nanofibers applied to cell culture can mimic extracellular matrix and improve in vitro cell behavior. Here, we describe biocompatible blended polyvinyl-alcohol (PVA)/gum arabic (GA) extracellular matrix (ECM)-like nanofibers for in vitro cell cultures capable of delivering nanocomposite for desired biomedical application. Therefore, PVA/GA ECM-like electrospun nanofibers were developed and characterized. Heat treatment was used to crosslink the nanofibers and biocompatibility was evaluated, which demonstrated the ability of developed platform to provide a cell culture-friendly environment. Previous work demonstrated that GA-gold nanoparticles (GA-AuNPs) in non-cytotoxic concentrations can reduce key metastatic cellular events such as invasion and colony formation of metastatic melanoma cells. Thus, crosslinked nanofibers were functionalized with GA-AuNPs and its cellular delivery was evaluated. GA-AuNPs were efficiently adsorbed onto the PVA/GA nanofibers surface and the system effectively delivered the nanocomposites to metastatic melanoma cells. In conclusion, the described biocompatible system could be prospected as a valuable in vitro tool for precision medicine.

Bio-nanocomposites of graphene with biopolymers; fabrication, properties, and applications

The unique properties of graphene and graphene oxide (GO) nanocomposites make them suitable for a wide range of medical, industrial, and agricultural applications. The addition of graphene or GO to a polymeric matrix can ameliorate its thermo-mechanical, electrical, and barrier characteristics. The present paper reviews the literature on graphene/GO-based bio-nanocomposites and examines the various fabrication methods, such as chemical vapor deposition, chemical synthesis, microwave synthesis, the solvothermal method, molecular beam epitaxy, and colloidal suspension. Each procedure potentially has its disadvantages, especially for mass production. Therefore, introducing an effective method for fabricating graphene on a large scale with high quality is essential. Recent studies have shown that graphene-based bio-nanocomposites are promising materials given their excellent performance in the development of biosensors, drug delivery systems, antimicrobials, modified electrodes, and energy storage systems among other applications. In this review, we evaluate the various procedures used for developing graphene/GO-based bio-nanocomposites and examine the features and applications of the related products. Furthermore, the toxicity of these compounds and attempts to uncover the optimal combinations of biopolymers and carbon nanomaterials for industrial applications will be discussed.

In vitro biocompatibility screening of a colloidal gum Arabic-polyaniline conducting nanocomposite

Although polyaniline (PANI) is a widely investigated conductive polymer for biological applications, studies addressing the biocompatibility of colloidal PANI dispersions are scarcely found in the literature of the area. Therefore, PANI nanoparticles stabilized by the natural polysaccharide gum Arabic (GA) were screened for their biocompatibility. The GA successfully stabilized the colloidal PANI-GA dispersions when exposed to a protein-rich medium, showing compatibility with the biological environment. The results obtained from a series of in vitro assays showed that, after up to 48 h of exposure to a range of PANI-GA concentrations (1-50 μg/mL), both mouse BALB/3T3 fibroblasts and RAW 264.7 macrophages showed no evidence of change in cellular proliferation, viability and metabolic activity. An increase in macrophage granularity poses as evidence of phagocytic uptake of PANI-GA, without resulting activation of this cell type. Additionally, the PANI-GA nanoparticles modulated the cell morphology changes induced on fibroblasts by GA in a concentration-dependent manner. Thus, this unprecedented biocompatibility study of PANI nanoparticles stabilized by a plant gum exudate polysaccharide showed promising results. This simple biomaterial might be further developed into colloidal formulations for biological and biomedical applications, taking advantage of its versatility, biocompatibility, and conductive properties.

Potential of carbohydrate-conjugated graphene assemblies in biomedical applications

Graphene displays various properties like optical, electrical, mechanical, etc. resulting in a large range of applications in biosensing, bio-imaging, medical and electronic devices. The graphene-based nanomaterials show disadvantages like hydrophobic surface, degradation of biomolecules (proteins and amino acids) and toxicity to the human and microbes by permeating into the cells and thus, limiting the use in the biomedical field. Conjugation of carbohydrates like chitin, cyclodextrins and cellulose with graphene results in thermal stability, oxygen repulsive ability, fire-retardant and gelling properties with better biodegradability, biocompatibility and safety leading to the formation of environment-friendly biopolymers. This article delivers an overview of the molecular interaction of different carbohydrates-derived from natural sources like marine, plants and microbes with graphene nanosheets to extend the applications in tissue engineering, surgical materials, biosensing and novel drug delivery for prolonged action in the treatment of breast and hepatic cancers.

Graphene impregnated electrospun nanofiber sensing materials: a comprehensive overview on bridging laboratory set-up to industry

Owing to the unique structural characteristics as well as outstanding physio-chemical and electrical properties, graphene enables significant enhancement with the performance of electrospun nanofibers, leading to the generation of promising applications in electrospun-mediated sensor technologies. Electrospinning is a simple, cost-effective, and versatile technique relying on electrostatic repulsion between the surface charges to continuously synthesize various scalable assemblies from a wide array of raw materials with diameters down to few nanometers. Recently, electrospun nanocomposites have emerged as promising substrates with a great potential for constructing nanoscale biosensors due to their exceptional functional characteristics such as complex pore structures, high surface area, high catalytic and electron transfer, controllable surface conformation and modification, superior electric conductivity and unique mat structure. This review comprehends graphene-based nanomaterials (GNMs) (graphene, graphene oxide (GO), reduced GO and graphene quantum dots) impregnated electrospun polymer composites for the electro-device developments, which bridges the laboratory set-up to the industry. Different techniques in the base polymers (pre-processing methods) and surface modification methods (post-processing methods) to impregnate GNMs within electrospun polymer nanofibers are critically discussed. The performance and the usage as the electrochemical biosensors for the detection of wide range analytes are further elaborated. This overview catches a great interest and inspires various new opportunities across a wide range of disciplines and designs of miniaturized point-of-care devices.

Electrospun fibers based on carbohydrate gum polymers and their multifaceted applications

Electrospinning has garnered significant attention in view of its many advantages such as feasibility for various polymers, scalability required for mass production, and ease of processing. Extensive studies have been devoted to the use of electrospinning to fabricate various electrospun nanofibers derived from carbohydrate gum polymers in combination with synthetic polymers and/or additives of inorganic or organic materials with gums. In view of the versatility and the widespread choice of precursors that can be deployed for electrospinning, various gums from both, the plants and microbial-based gum carbohydrates are holistically and/or partially included in the electrospinning solution for the preparation of functional composite nanofibers. Moreover, our strategy encompasses a combination of natural gums with other polymers/inorganic or nanoparticles to ensue distinct properties. This early established milestone in functional carbohydrate gum polymer-based composite nanofibers may be deployed by specialized researchers in the field of nanoscience and technology, and especially for exploiting electrospinning of natural gums composites for diverse applications.

Development of ZnO Nanoflake Type Structures Using Silk Fibres as Template for Water Pollutants Remediation

We have fabricated ZnO nanoflake structures using degummed silk fibers as templates, via soaking and calcining the silk fibers bearing ZnO nanoparticles at 150 °C for 6 h. The obtained ZnO nanostructures were characterized using scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), and UV-vis and fluorescence spectroscopic analysis. The size (~500–700 nm) in length and thicknesses (~60 nm) of ZnO nanoflakes were produced. The catalysis performances of ZnO nanoflakes on silk fibers (ZnSk) via photo-degradation of naphthalene (93% in 256 min), as well as Rose Bengal dye removal (~1.7 mM g⁻¹) through adsorption from aqueous solution, were practically observed. Further, ZnSk displayed superb antibacterial activity against the tested model gram-negative Escherichia coli bacterium. The produced ZnSk has huge scope to be used for real-world water contaminants remediation applications.

A Polymeric Composite Material (rGO/PANI) for Acid Blue 129 Adsorption

Over the years, polyaniline (PANI) has received enormous attention due to its unique properties. Herein, it was chosen to develop a new polymeric composite material: reduced graphene oxide/polyaniline (rGO/PANI). The composite was prepared by a simple and cost-effective fabrication method of formation by mixing and sonication in various conditions. The obtained materials were characterized and identified using various techniques such as scanning electron microscopy (SEM), Raman and ATR–FTIR spectroscopy, and X-ray diffraction (XRD). The objective of the paper was to confirm its applicability for the removal of contaminants from water. Water could be contaminated by various types of pollutants, e.g., inorganics, heavy metals, and many other industrial compounds, including dyes. We confirmed that the Acid Blue 129 dyes can be substantially removed through adsorption on prepared rGO/PANI. The adsorption kinetic data were modeled using the pseudo-first-order and pseudo-second-order models and the adsorption isotherm model was identified.

Microscopic Techniques for the Analysis of Micro and Nanostructures of Biopolymers and Their Derivatives

Natural biopolymers, a class of materials extracted from renewable sources, is garnering interest due to growing concerns over environmental safety; biopolymers have the advantage of biocompatibility and biodegradability, an imperative requirement. The synthesis of nanoparticles and nanofibers from biopolymers provides a green platform relative to the conventional methods that use hazardous chemicals. However, it is challenging to characterize these nanoparticles and fibers due to the variation in size, shape, and morphology. In order to evaluate these properties, microscopic techniques such as optical microscopy, atomic force microscopy (AFM), and transmission electron microscopy (TEM) are essential. With the advent of new biopolymer systems, it is necessary to obtain insights into the fundamental structures of these systems to determine their structural, physical, and morphological properties, which play a vital role in defining their performance and applications. Microscopic techniques perform a decisive role in revealing intricate details, which assists in the appraisal of microstructure, surface morphology, chemical composition, and interfacial properties. This review highlights the significance of various microscopic techniques incorporating the literature details that help characterize biopolymers and their derivatives.

Preparation and antimicrobial activity of thyme essential oil microcapsules prepared with gum arabic

Thyme essential oils (TEO) exhibit antimicrobial activities against a wide range of pathogenic microorganisms. Microcapsulation technology can be used to improve the stability, water solubility and antibacterial performance of TEO. In this paper, TEO was selected as the core material, and β-cyclodextrin (β-CD) was the wall material for microcapsulation; gum arabic (GA) was used as an emulsifier to prepare microcapsules by coprecipitation. The effects of gum arabic on the encapsulation rate, particle size and release rate of microcapsules were investigated. The optimal condition was found to be TEO : GA by 1 : 3 (w/w) ratio. In this condition, the embedding rate, release rate, and average size of the microcapsules were 87.61%, 53.00%, and 8.20 μm, respectively. Scanning electron microscopy (SEM) revealed that, under the action of gum arabic, the surface of microcapsules was more complete, and the size apparently decreased. Fourier-transform infrared spectroscopy (FTIR) indicated that there was no significant chemical interaction between gum arabic and β-CD. Gum arabic acted only as an emulsifier and remained in the mixed solution. For microcapsules with gum arabic as an emulsifier, the cumulative release rate of essential oils were slower at the initial time compared to microcapsules without added gum arabic. Antimicrobial activity assay exhibited TEO, which showed an inhibitory effect against Botryodiplodia theobromae Pat., and the inhibitory effect was especially strong against Colletotrichum gloeosporioides Penz. Finally, the obtained microcapsules showed the same antibacterial effect.

The gum arabic was, for the first time, used as an emulsifier for microcapsulation of essential oil.