Highly recoverable, reusable, cost-effective, and Schiff base functionalized pectin supported Pd(II) catalyst for microwave-accelerated Suzuki cross-coupling reactions

Synthesis, Characterization, Investigation of DNA Interactions and Biological Evaluation of Co(II), Ni(II), Cu(II) and Zn(II) Complexes with Newly Synthesized 2-methoxy 5-trifluoromethyl benzenamine Schiff Base

The biologically active and thermally stable bivalent Co(II), Ni(II), Cu(II), and Zn(II) complexes (C1, C2, C3, and C4) of novel Schiff base ligand [(5-trifluoromethyl-2-methoxyphenylamino)methyl)-4,6-diiodophenol (L)] have been synthesized. The structural analysis of these complexes have been carried out by elemental analysis, 1H-NMR, FTIR, ESI mass, UV-visible, ESR, TGA techniques and magnetic measurements. The obtained results were confirmed as square planar geometry for Ni(II) and Cu(II) complexes, whereas octahedral geometry for Co(II) and Zn(II) complexes. The geometry optimized structures were developed by employing CHEM 3D software. The DNA binding interaction studies such as UV-vis absorption, viscosity, and fluorescence studies have been confirmed that the mode of binding of complexes with DNA is an intercalative binding. The DNA cleavage studies revealed that all the complexes are found to be potent to cleave the DNA into Form I & II. The in-vitro pathological studies of all the complexes against various microbial strains (Gram + and Gram -), revealed that Cu(II) complexes are more potent compared to other complexes and Schiff base. The anti diabetic activity studies revealed that the Cu(II) complex exhibited slightly higher activity than Co(II), Ni(II), and Zn(II) complexes. The results of antioxidant activity by DPPH method, suggested that the Cu(II) complex has higher activity and comparable with the standard compounds.

How the Chemical Properties of Polysaccharides Make It Possible to Design Various Types of Organic-Inorganic Composites for Catalytic Applications

Recently, the use of plant-origin materials has become especially important due to the aggravation of environmental problems and the shortage and high cost of synthetic materials. One of the potential candidates among natural organic compounds is polysaccharides, characterized by a number of advantages over synthetic polymers. In recent years, natural polysaccharides have been used to design composite catalysts for various organic syntheses. This review is devoted to the current state of application of polysaccharides (chitosan, starch, pectin, cellulose, and hydroxyethylcellulose) and composites based on their catalysis. The article is divided into four main sections based on the type of polysaccharide: (1) chitosan-based nanocomposites; (2) pectin-based nanocomposites; (3) cellulose (hydroxyethylcellulose)-based nanocomposites; and (4) starch-based nanocomposites. Each section describes and summarizes recent studies on the preparation and application of polysaccharide-containing composites in various chemical transformations. It is shown that by modifying polysaccharides, polymers with special properties can be obtained, thus expanding the range of biocomposites for catalytic applications.

Efficient and biocompatible new palladium-supported boehmite nanoparticles: synthesis, characterization and application in Suzuki-Miura and Mizoroki-Heck coupling reactions

Palladium complex-supported on boehmite (Pd(0)-SMTU-boehmite) nanoparticles were synthesized and characterized by using XRD, SEM, EDS, TGA, BET, ICP and FT-IR techniques. When applied as a new catalyst for C-C coupling reactions of Suzuki-Miyaura and Mizoroki-Heck in PEG-400 solvent, the Pd(0)-SMTU-boehmite nanoparticles showed excellent activity and recyclability. The study of palladium leaching by the ICP-OES technique and hot filtration led to the catalyst exhibiting excellent stability and recyclability.

Bimetallic (AuAg, AuPd and AgPd) nanoparticles supported on cellulose-based hydrogel for reusable catalysis

Biopolymer-derived hydrogels with low-cost and sustainable features have been considered as fascinating supported materials for metal nanoparticles. Cellulose, as the most abundant biopolymer, is a renewable raw material to prepare biopolymer-derived hydrogels for catalysis. Here, a cellulose-based hydrogel is designed to load bimetallic (AuAg, AuPd and AgPd) nanoparticles. 4-Nitrophenol reduction and Suzuki-Miyaura coupling reactions are selected to evaluate and compare the catalytic performance of the resulting bimetallic nanoparticle-loaded cellulose-based composite hydrogels. The bimetallic nanocomposite hydrogels are easy to be recycled over 10 times during the catalytic experiments and possess good applicability and generality for various substrates. The catalytic activity of bimetallic nanocomposite hydrogels was compared with recent literatures. In addition, the possible catalytic mechanism is also proposed. This work is expected to give a new insight for designing and preparing bimetallic nanoparticle-based cellulose hydrogels and proves its applicability and prospect in the catalytic field.

Schiff base modified starch: A promising biosupport for palladium in Suzuki cross-coupling reactions

Starch can be used in diverse fields because it is a readily available, non-toxic polysaccharide with adaptable functionality and biodegradability. In this study, taking the aforementioned characteristics into consideration, we designed a modified starch (Starch-SB), which serves as supporting material for palladium stabilization. This new air and moisture-stable robust palladium composite [Starch-SB-Pd(II)] was characterized by FT-IR, XRD, TGA, XPS, SEM, EDX, TEM, CP/MAS ¹³C NMR, and ICP-MS analytical techniques. The catalytic studies exhibit high activity (up to 99 %) and stability in Suzuki cross-coupling reactions for this starch supported catalytic system under mild conditions (lower reaction temperature and green solvents) because of the cooperative interactions of multifunctional capturing sites on starch (Schiff base, hydroxy and amine groups) with palladium species. The experiments on reusability demonstrate that Starch-SB-Pd(II), which was prepared from functionalized starch, could be readily recycled several cycles through centrifugation. Moreover, we proposed a possibly multifunctional complex structure. This work presents an appealing and intriguing pathway for the utilization of polysaccharide as crucial support in green chemical transformations.

Polysaccharide-modified liposomes and their application in cancer research

Nanodrug delivery systems have been widely used in cancer treatment. Among these, liposomal drug carriers have gained considerable attention due to their biocompatibility, biodegradability, and low toxicity. However, conventional liposomes have several shortcomings, such as poor stability, rapid clearance, aggregation, fusion, degradation, hydrolysis, and oxidation of phospholipids. Polysaccharides are natural polymers of biological origin that exhibit structural stability, excellent biocompatibility and biodegradability, flexibility, non-immunogenicity, low toxicity, and targetability. Therefore, they represent a promising class of polymers for the modification of the surface properties of liposomes to overcome their shortcomings. In addition, polysaccharides can be readily combined with other materials to develop new composite materials. Hence, they represent the optimal choice for liposomal modification to improve pharmacokinetics and clinical utility. Polysaccharide-coated liposomes exhibit better stability, drug release kinetics, and cellular uptake than conventional liposomes. The oncologic application of polysaccharide-coated liposomes has become a research hotspot. We summarize the preparation, physicochemical properties, and antineoplastic effects of polysaccharide-coated liposomes to facilitate antitumor drug development.

Efficient and Recyclable Solid-Supported Pd(II) Catalyst for Microwave-Assisted Suzuki Cross-Coupling in Aqueous Medium

Solid-supported catalysts play efficient and crucial roles in organic synthesis. A solid-supported palladium(II) complex based on chitosan was synthesized and fully characterized using all possible tools (Fourier transform infrared spectroscopy, thermogravimetry analysis, differential scanning calorimetry, X-ray photoelectron spectroscopy, energy-dispersive X-ray spectroscopy, inductively coupled plasma atomic emission spectrometry, scanning electron microscopy, transmission electron microscopy, and Brunauer-Emmett-Teller analysis). The catalytic activity of the solid-phase catalyst in Suzuki cross-coupling reactions was evaluated in aqueous solvents under both conventional heating and microwave irradiation conditions. The recyclability and thermal stability of the prepared catalyst were also examined, and the catalyst was found to be active till five consecutive runs without a notable loss of activity under the microwave condition, with the turnover number and turnover frequency values reaching 19,019 and 114,114 h^-1, respectively.

Metal-organic framework grown in situ on chitosan microspheres as robust host of palladium for heterogeneous catalysis: Suzuki reaction and the p-nitrophenol reduction

In this study, the metal-organic framework ZIF-8 has been successfully planted on the surface of chitosan microspheres (CS/PDA@ZIF-8) using polydopamine as connecting material for the first time, which avoids the use of expensive, non-renewable, and non-biodegradable polystyrene microspheres commonly used as templates to prepare core-shell structures. Moreover, the metal-organic framework ZIF-8 was prepared specially by three different methods and all characterized by SEM, TEM, and BET, and the ZIF-8 shell prepared at room temperature presents a regular morphology, uniform size, large specific surface area (353.1 m²/g) than the shells prepared by the other methods including. The CS/PDA@ZIF-8₂₅@Pd with high catalytic activity and high stability was especially prepared by encapsulating Pd nanoparticles into the pores of CS/PDA@ZIF-8₂₅. Notably, the fabricated catalyst performed well in an array of reactions, for example the Kapp value of the p-nitrophenol reduction reaction reached 0.0426 s^-1, and the TOF of the Suzuki coupling reaction reached 128 h^-1. In addition, the ZIF-67, UiO-66, UiO-66-NH₂, HKUST-1, and NH₂-MIL-53(Al) were also grown on chitosan microcapsules successively to prepare the core-shell microspheres, which prove the universal applicability of this strategy. And beyond that, the introduction of chitosan microspheres endows the material with biodegradable properties and excellent recycling properties.

Progresses in chitin, chitosan, starch, cellulose, pectin, alginate, gelatin and gum based (nano)catalysts for the Heck coupling reactions: A review

Heck cross-coupling reaction (HCR) is one of the few transition metal catalyzed CC bond-forming reactions, which has been considered as the most effective, direct, and atom economical synthetic method using various catalytic systems. Heck reaction is widely employed in numerous syntheses including preparation of pharmaceutical and biologically active compounds, agrochemicals, natural products, fine chemicals, etc. Commonly, Pd-based catalysts have been used in HCR. In recent decades, the application of biopolymers as natural and effective supports has received attention due to their being cost effective, abundance, and non-toxicity. In fact, recent studies demonstrated that biopolymer-based catalysts had high sorption capacities, chelating activities, versatility, and stability, which make them potentially applicable as green materials (supports) in HCR. These catalytic systems present high stability and recyclability after several cycles of reaction. This review aims at providing an overview of the current progresses made towards the application of various polysaccharide and gelatin-supported metal catalysts in HCR in recent years. Natural polymers such as starch, gum, pectin, chitin, chitosan, cellulose, alginate and gelatin have been used as natural supports for metal-based catalysts in HCR. Diverse aspects of the reactions, different methods of preparation and application of polysaccharide and gelatin-based catalysts and their reusability have been reviewed.

Immobilizing of palladium on melamine functionalized magnetic chitosan beads: A versatile catalyst for p-nitrophenol reduction and Suzuki reaction in aqueous medium

In this study, an environmental-friendly palladium catalyst with high efficiency, magnetic, recoverability, reusability, and excellent stability was prepared and thoroughly characterized by the Fourier transform infrared spectroscopy (FT-IR), Scanning electron microscopy (SEM), X-ray diffraction (XRD), Elemental mapping, Thermogravimetric analysis (TGA) and Energy-dispersive X-ray spectroscopy (EDX). Results demonstrates that melamine provides a coordination point on the surface of chitosan microspheres, which provides a platform for the uniform distribution of palladium (II) and combines with palladium (II) firmly to avoid unnecessary leaching of nanoparticles. Besides, Fe₃O₄/CS-Me@Pd microcapsules exhibited high catalytic performance in reducing p-NP in water at room temperature (150-300 s). This composite was also effective in the Suzuki-Miyaura coupling reaction under mild conditions with high catalytic performance (TON = 3.8 × 10⁴, TOF = 7.6 × 10⁴). Reproducibility experiments also showed that Fe₃O₄/CS-Me@Pd microcapsules have high recovery efficiency and can work at least six times during these two catalytic reactions. The hot filtration test indicated that the catalyst has heterogeneous nature.

Lignin, lipid, protein, hyaluronic acid, starch, cellulose, gum, pectin, alginate and chitosan-based nanomaterials for cancer nanotherapy: Challenges and opportunities

Although nanotechnology-driven drug delivery systems are relatively new, they are rapidly evolving since the nanomaterials are deployed as effective means of diagnosis and delivery of assorted therapeutic agents to targeted intracellular sites in a controlled release manner. Nanomedicine and nanoparticulate drug delivery systems are rapidly developing as they play crucial roles in the development of therapeutic strategies for various types of cancer and malignancy. Nevertheless, high costs, associated toxicity and production of complexities are some of the critical barriers for their applications. Green nanomedicines have continually been improved as one of the viable approaches towards tumor drug delivery, thus making a notable impact on which considerably affect cancer treatment. In this regard, the utilization of natural and renewable feedstocks as a starting point for the fabrication of nanosystems can considerably contribute to the development of green nanomedicines. Nanostructures and biopolymers derived from natural and biorenewable resources such as proteins, lipids, lignin, hyaluronic acid, starch, cellulose, gum, pectin, alginate, and chitosan play vital roles in the development of cancer nanotherapy, imaging and management. This review uncovers recent investigations on diverse nanoarchitectures fabricated from natural and renewable feedstocks for the controlled/sustained and targeted drug/gene delivery systems against cancers including an outlook on some of the scientific challenges and opportunities in this field. Various important natural biopolymers and nanomaterials for cancer nanotherapy are covered and the scientific challenges and opportunities in this field are reviewed.

NiFe2O4@SiO2@ZrO2/SO42−/Cu/Co nanoparticles: a novel, efficient, magnetically recyclable and bimetallic catalyst for Pd-free Suzuki, Heck and C–N cross-coupling reactions in aqueous media

The novel heterogeneous bimetallic nanoparticles of Cu–Co were synthesized and successfully applied as a recyclable magnetically catalyst in Heck, Suzuki, and C–N cross-coupling via a quick, easy, efficacious and environmentally protocol.

Recent Developments in the Immobilization of Palladium Complexes on Renewable Polysaccharides for Suzuki–Miyaura Cross-Coupling of Halobenzenes and Phenylboronic Acids

Polysaccharides derived from natural sources exhibit unique structures and functional groups, which have recently garnered them increased attention for their potential applicability as supports for metal catalysts. Renewable polysaccharide matrices were employed as supports for palladium complexes, with or without previous modification of the support, and were used in Suzuki cross-coupling of halobenzenes and phenylboronic acid derivatives. In this review, recent developments in the immobilization of palladium-based complexes are reported, including descriptions of the preparation procedures and catalytic activity of each system. In addition, the effects of the nature of the polymeric support and of the reaction conditions on catalytic performance are discussed.

Pyrimidyl formamidine palladium(II) complex as a nanocatalyst for aqueous Suzuki-Miyaura coupling

Synthesis of a new phosphene-free nano-size formamidine-based palladium complex have been achieved. The molecular structure of novel palladium complex have been confirmed using spectroscopic methods of analysis as well as physical characterizations. The synthesized complex has been used as a catalyst for microwave assisted aqueous Suzuki-Miyaura Cross-coupling (SMC) of aryl bromides with phenylboronic acid. The formamidine-based Pd(II)-complex exhibited excellent catalytic activity to obtain biaryls using mild reaction conditions.