Amine functionalization of microcrystalline cellulose assisted by (3-chloropropyl)triethoxysilane

Microcrystalline cellulose from soybean hull as an excipient in solid dosage forms: Preparation, powder characterization, and tableting properties

Microcrystalline cellulose (MCC) is one of the essential functional excipients in the formulation of tablets. The need for cheaper MCC sources has drawn significant attention to exploring renewable sources. In this study, MCC was produced from soybean hull (SBH), the primary by-product of the soy industry, using a novel, simplified, and cost-effective approach. Various characterization techniques were used to study the physicochemical properties and micromeritics of the SBH-based MCC powders and compare them to those of the commercial Avicel PH-101. SBH MCCs had a larger particle size, a broader particle size distribution, a higher degree of polymerization, a higher degree of crystallinity, better thermal stability, and slightly superior flowability and compressibility than Avicel PH-101. The tableting blends (containing 60 % MCC) were prepared, and the post-compression out-of-die Heckel analysis showed that formulations with aggregated SBH MCCs were less ductile than those made with Avicel PH-101, resulting in a lower porosity (better compressibility) of the latter at higher compression pressures. The hardness values for all formulations were above 6 kg, with higher values for those made with Avicel PH-101. The lubricant sensitivity was lower for SBH MCCs. All tablets made using developed formulations showed very low friability (<0.1 %) and short disintegration times (<90 s), making them well-suited candidates for manufacturing orally disintegrating tablets (ODTs).

Improved lipase performance by covalent immobilization of Candida antarctica lipase B on amino acid modified microcrystalline cellulose as green renewable support

Development of immobilized lipase with excellent catalytic performance and low cost is the major challenge for large-scale industrial applications. In this study, green renewable microcrystalline cellulose (MCC) that was hydrophobically modified with D-alanine (Ala) or L-lysine (Lys) was used for immobilizing Candida antarctica lipase B (CALB). The improved catalytic properties were investigated by experimental and computational methods. CALB immobilized on MCC-Ala with higher hydrophobicity showed better catalytic activity than CALB@MCC-Lys because the increased flexibility of the lid region of CALB@MCC-Ala favored the formation of open conformation. Additionally, the low root mean square deviation and the high β-sheet and α-helix contents of CALB@MCC-Ala indicated that the structure became more stable, leading to a significantly enhanced stability (54.80% and 90.90% relative activity at 70 °C and pH 9.0, respectively) and good reusability (48.92% activity after 5 cycles). This study provides a promising avenue to develop immobilized lipase with high catalytic properties for industry applications.

Recent Developments in Chemical Derivatization of Microcrystalline Cellulose (MCC): Pre-Treatments, Functionalization, and Applications

Microcrystalline Cellulose (MCC) is an isolated, colloidal crystalline portion of cellulose fibers, and it is a valuable alternative to non-renewable fossil-based materials. It is used for a large plethora of different fields, such as composites, food applications, pharmaceutical and medical developments, and cosmetic and material industries. The interest of MCC has also been driven by its economic value. In the last decade, particular attention has been driven to the functionalization of its hydroxyl groups to expand the field of applications of such biopolymer. Herein, we report and describe several pre-treatment methods that have been developed to increase the accessibility of MCC by breaking its dense structure allowing further functionalization. This review also collects the results that have appeared in the literature during the last two decades on the utilization of functionalized MCC as adsorbents (dyes, heavy metals, and carbon dioxide), flame retardants, reinforcing agents, energetic materials, such as azide- and azidodeoxy-modified, and nitrate-based cellulose and biomedical applications.

Fabrication and characterization of bilayer scaffolds - nanocellulosic cryogels - for skin tissue engineering by co-culturing of fibroblasts and keratinocytes

This study focuses on developing a microarchitectural bilayer structure for stimulating the two top layers of skin tissue (epidermis and dermis) fabricated using a one-step freeze-drying method. Cellulose nanofibers (CNFs) and poly (vinyl) alcohol (PVA) were used as a biocompatible scaffolding material, and the composition was designed in such a way that it provides physical and biological property attributes. In this work, scaffolding materials with integrated layer structures and well interconnected and open pore structures were obtained. This bilayer structure had porosity with a pore size of 19.72 μm and 90.71 μm for the simulation of the epidermis and dermis, respectively. The production and expression of laminin, collagen IV, and keratin 10 proteins in the bilayer cryogel scaffolds obtained from the immunofluorescence study were 49.7 %, 63.8 %, and 49.3 %, respectively. The extracellular matrix (ECM) was produced in each scaffold layer. The observations confirmed that the porosity and pore size of both N1 and N2 layers were appropriate for the fibroblast and keratinocyte cells, respectively. H&E stained cross-sections of bilayer cryogel scaffolds illustrated epidermal and dermal layers produced by co-culturing keratinocytes and fibroblasts. Based on the results, the bilayer CNF/PVA scaffold can be used in skin tissue engineering applications. However, more experiments and in vivo evaluations are needed to express this conclusion more accurately.

Strategies to control the growth of cyanobacteria and recovery using adsorption and desorption

In this study, adsorption strategy using diethylenetriamine-modified cotton fiber (DETA-cotton) was investigated to control the target cells in aqueous phase. Adsorptive removal of M. aeruginosa using the DETA-cotton showed decrease in cell concentration from (100 ± 4.0) × 10⁴ cells/mL to (32.1 ± 0.7) × 10⁴ cells/mL in 24 h, and the concentration of microcystin did not increase during the removal process. Also, an increase in the amine groups on the surface was confirmed through the surface characterization by FT-IR and XPS. Desorption process was performed to analyze total lipid and fatty acid contents for potential use as bio-energy resources. About 90 % of the adsorbed cells were recovered through desorption, and the lipid content and composition were more suitable for use as biodiesel raw materials. Our adsorption-based approach might provide feasible solution not only to counteract environmental issue HABs but also to recover energy-resources from the harmful cyanobacterial species.

Facile dispersion strategy to prepare polylactic acid/reed straw nanofiber composites with enhanced mechanical and thermal properties

The challenge of dispersing nanocellulose in hydrophobic polymers such as polylactic acid (PLA) still obstacles the further application of cellulose nanocomposites. An environment-friendly and facile wet-shearing pretreatment strategy without using any organic solvent was developed in this work. Silane modified lignocellulose nanofiber (SLCNF) was pre-dispersed into PLA by wet-shearing pretreatment, followed by extrusion process and the SLCNF could be dispersed extremely well in PLA matrices. SLCNF formed a crosslinked network and had an improved compatibility, which improved the mechanical and thermal properties of PLA composites. The tensile strength, elongation at break and thermal deformation temperature of the composites were increased by 12.6 %, 32.4 % and 9.1 °C, respectively. Moreover, SLCNF promoted the crystallization of PLA as a heterogeneous nucleating agent and the crystallinity was increased by about 40 %. This study provides an effective way to disperse nanocellulose in polymer matrix with high efficiency to enhance polymer-based composites.

Development of PVA-Psyllium Husk Meshes via Emulsion Electrospinning: Preparation, Characterization, and Antibacterial Activity

In this study, polyvinyl alcohol (PVA) and psyllium husk (PSH)/D-limonene electrospun meshes were produced by emulsion electrospinning for use as substrates to prevent the growth of bacteria. D-limonene and modified microcrystalline cellulose (mMCC) were preferred as antibacterial agents. SEM micrographs showed that PVA–PSH electrospun mesh with a 4% amount of D-limonene has the best average fiber distribution with 298.38 ± 62.8 nm. Moreover, the fiber morphology disrupts with the addition of 6% D-limonene. FT-IR spectroscopy was used to analyze the chemical structure between matrix–antibacterial agents (mMCC and D-limonene). Although there were some partial physical interactions in the FT-IR spectrum, no chemical reactions were seen between the matrixes and the antibacterial agents. The thermal properties of the meshes were determined using thermal gravimetric analysis (TGA). The thermal stability of the samples increased with the addition of mMCC. Further, the PVA–PSH–mMCC mesh had the highest value of contact angle (81° ± 4.05). The antibacterial activity of functional meshes against Gram (−) (Escherichia coli, Pseudomonas aeruginosa) and Gram (+) bacteria (Staphylococcus aureus) was specified based on a zone inhibition test. PPMD6 meshes had the highest antibacterial results with 21 mm, 16 mm, and 15 mm against Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa, respectively. While increasing the amount of D-limonene enhanced the antibacterial activity, it significantly decreased the amount of release in cases of excess D-limonene amount. Due to good fiber morphology, the highest D-limonene release value (83.1%) was observed in PPMD4 functional meshes. The developed functional meshes can be utilized as wound dressing material based on our data.

Novel cellulose supported 1,2-bis(4-aminophenylthio)ethane Ni(ii) complex (NiII(BAPTE)(NO3)2-Cell) as an efficient nanocatalyst for the synthesis of spirooxindole derivatives

Cellulose was used as a support for immobilizing a Ni(ii) complex of 1,2-bis(4-aminophenylthio)ethane to prepare NiII(BAPTE)(NO3)2-Cell as a new organo-inorganic hybrid nanocatalyst. The properties of the prepared catalyst were studied using various analyses such as FT-IR, XRD, SEM, TGA and EDX. NiII(BAPTE)(NO3)2-Cell was employed as a reusable catalyst for the synthesis of spirooxindole derivatives via a three-component condensation of isatin, malononitrile and reactive methylene compounds. The nanocatalyst can be readily and quickly separated from the reaction mixture and can be reused for at least eight successive reaction cycles without a significant reduction in efficiency. The facile accessibility to the starting materials, use of green solvents and conducting the reactions in eco-friendly and cost-effective conditions have made this protocol a suitable method for preparing spirooxindole derivatives.

Cellulase immobilized on kaolin as a potential approach to improve the quality of knitted fabric

Biopolishing is a textile process that uses cellulases to improve the pilling resistance of fabrics. Although the process improves the pilling resistance, softness and color brightness of fabrics, it causes a significant loss of tensile strength in treated fabrics. The present work studied the use of cellulase immobilized on kaolin by adsorption and covalent bonding in biopolishing to get around this problem. The cellulase immobilization has been reported as promising alternative to overcome the inconvenient of biopolishing, but it has been very poorly explored. The results showed that cellulase immobilized by both covalent bonding and adsorption methods provided to the knitted fabric similar or superior pilling resistance to free cellulase, but with greater tensile strength. Immobilization also allowed for efficient recovery and reuse of the enzyme. The present work is a relevant contribution to the literature, since, as far as we know, it is the first work that shows it is possible to minimize the loss of tensile strength and also reuse the immobilized enzyme, giving a better-quality product and also contribution to reducing the cost of the polishing step.

Polyethyleneimine-impregnated alkali treated waste bamboo powder for effective dye removal

In this study, the polyethyleneimine (PEI) modified waste bamboo powder (WBP-Na-PEI) was successfully prepared and applied to adsorbing Congo red (CR) dye from aqueous solution. The obtained materials were characterized by field emission scanning electron microscope, X-ray diffraction, Fourier transform-infrared, and thermogravimetric analysis. The results showed that WBP-Na-PEI(1.8 K-5) was synthesized successfully and PEI uniformly covered the WBP-Na-PEI(1.8 K-5) surface. In the process of adsorption, four kinds of influencing factors were discussed, and the adsorption mechanisms such as kinetics, isotherm, thermodynamics were explored. The maximum adsorption capacity of WBP-Na-PEI(1.8 K-5) was 992.94 mg·g^-1 at 298 ± 1 K, and the removal efficiency was over 98%. Pseudo-first-order, pseudo-second-order and intra-particle diffusion models were studied, the results showed that the adsorption process conformed to the pseudo-second-order model, and the rate of this process was controlled by many steps. Furthermore, the removal efficiency of the adsorption kinetics reached 85% within 10 minutes. The results of the isotherm model and thermodynamics showed that the adsorption process was consistent with the Langmuir model and was mainly a spontaneous chemical endothermic process of monolayer. And the removal efficiency of the adsorbent reached 93% at the concentration of 400 mg/L, which can be expected to have a broad prospect in the treatment of CR industrial wastewater.

Chemical functionalization of nano fibrillated cellulose by glycidyl silane coupling agents: A grafted silane network characterization study

Nano fibrillated cellulose (NFC) has turned into a material widely studied due to its desirable performance for numerous organic systems. Nevertheless, its surface is not very compatible with most organic systems; hence, chemical functionalization methods offer a path to solve this problem. In this study, NFC is successfully functionalized with two silane coupling agents: 3-glycidyloxypropyl trimethoxysilane (GPS) and 3-glycidyloxypropyl dimethylethoxysilane (GPMES) by a simple, direct, and environmentally friendly method. Different analyses have been carried out in order to confirm the chemical modification of NFC. ATR-IR, XPS, and ²⁹Si NMR spectroscopies confirmed the chemical modification that allowed the understanding of the structure and the conformation onto the modified NFC surface. SEM and AFM microscopies were performed to study possible alterations in morphology; a slight change was observed. Thermal properties were also analyzed by TGA analysis. It remains stable after chemical functionalization. Grafted NFC showed good performance compared to the pristine one. It allows a better dispersion into organic systems improving their properties.

Polyethersulfone membrane embedded with amine functionalized microcrystalline cellulose

In this investigation, microcrystalline cellulose (MCC) was functionalized with metformin HCl using (3-chloropropyl)triethixysilane (CPTES) as a coupling agent. Polyethersulfone (PES) membranes were incorporated with different concentrations of modified MCC (MMCC) to enhance its affinity for heavy metals during filtration of aqueous solutions. The composite membranes were characterized via fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), atomic force microscopy (AFM), Brunauer-Emmett-Teller (BET) method, porosity and contact angle measurements and mechanical analysis. The presence of MMCC in the host matrix was confirmed by FTIR. Although composites decomposed at lower temperatures, their thermal stability was sufficient to meet their performance requirements. DSC showed enhanced glass transition temperature (T_g) due to the interfacial interactions between membrane constituents which restrict the mobility of polymer chains. Microscopic imaging revealed higher surface roughness of composites compared to neat PES. Inclusion of MMCC increased the porosity and hydrophilicity of the membrane which consequently, higher permeability can be achieved.

Synthesis, Characterization and Cytotoxicity Studies of Aminated Microcrystalline Cellulose Derivatives against Melanoma and Breast Cancer Cell Lines

Cellulose based materials are emerging in the commercial fields and high-end applications, especially in biomedicines. Aminated cellulose derivatives have been extensively used for various applications but limited data are available regarding its cytotoxicity studies for biomedical application. The aim of this study is to synthesize different 6-deoxy-amino-cellulose derivatives from Microcrystalline cellulose (MCC) via tosylation and explore their cytotoxic potential against normal fibroblasts, melanoma and breast cancer. 6-deoxy-6-hydrazide Cellulose (Cell Hyd) 6-deoxy-6-diethylamide Cellulose (Cell DEA) and 6-deoxy-6-diethyltriamine Cellulose (Cell DETA) were prepared and characterized by various technologies like Fourier transform infrared spectroscopy-attenuated total reflectance (FTIR-ATR), nuclear magnetic resonance spectroscopy (NMR), X-ray diffractogram (XRD), Scanning Electron microscopy (SEM), Elemental Analysis and Zeta potential measurements. Cytotoxicity was evaluated against normal fibroblasts (NIH3T3), mouse skin melanoma (B16F10), human epithelial adenocarcinoma (MDA-MB-231) and human breast adenocarcinoma (MCF-7) cell lines. IC₅₀ values obtained from cytotoxicity assay and live/dead assay images analysis showed MCC was non cytotoxic while Cell Hyd, Cell DEA and Cell DETA exhibited noncytotoxic activity up to 200 μg/mL to normal fibroblast cells NIH3T3, suggesting its safe use in medical fields. The mouse skin melanoma (B16F10) are the most sensitive cells to the cytotoxic effects of Cell Hyd, Cell DEA and Cell DETA, followed by human breast adenocarcinoma (MCF-7). Based on our study, it is suggested that aminated cellulose derivatives could be promising candidates for tissue engineering applications and in cancer inhibiting studies in future.

Microcrystalline cellulose from Posidonia oceanica brown algae: Extraction and characterization

Posidonia oceanica brown algae (POBA) represent an abundant and renewable biomass in Algerian seas. In the present study, the POBA were chemically treated through delignification and alkali treatment followed by acid hydrolysis to produce pure microcrystalline cellulose (MCC). FTIR analysis indicates that most lignin and hemicellulose were eliminated during the chemical treatments. The XRD measurements revealed that the obtained cellulose and MCC belong to cellulose I polymorph, with crystallinity index of 60.50% and 74.23%, respectively. SEM micrographs of the produced MCC showed a non-uniform micro sized rod-like shape morphology with an average diameter of 8.4 ± 2.1 μm. The thermal analysis results exhibited that the decomposition temperature of the prepared MCC shifted to higher temperature compared to that of the respective cellulose and raw POBA. The authenticity of the prepared MCC was also examined by comparing its physicochemical properties with those of commercial MCC. Based on these analyses, POBA-MCC showed tremendous potential to be used in several applications.