Synthesis of spherical magnetic calcium modified chitosan micro-particles with excellent adsorption performance for anionic-cationic dyes

Study on Preparation of Calcium-Based Modified Coal Gangue and Its Adsorption Dye Characteristics

Efficient and thorough treatment of dye wastewater is essential to achieve ecological harmony. In this study, a new type of calcium-based modified coal gangue (Ca-CG) was prepared by using solid waste coal gangue as raw material and a CaCl2 modifier, which was used for the removal of malachite green, methylene blue, crystal violet, methyl violet and other dyes in water. When the dosage of Ca-CG was 1-5 g/L, the dosage of Ca-CG was the main factor affecting the dye adsorption effect. The adsorption effects of Ca-CG on four dyes were as follows: malachite green > crystal violet > methylene blue > methyl violet. Kinetics, isotherms and thermodynamic analysis showed that the adsorption of malachite green, methyl blue, crystal violet and methyl violet by Ca-CG fitted the second-order kinetic model, and adsorption with chemical reaction is the main process. The adsorption of four dyes by Ca-CG conformed to the Freundlich model, which is dominated by multi-molecular layer adsorption, and the adsorption was easy to carry out. The adsorption process of Ca-CG on the four dyes was spontaneous. The results of FTIR, XRD and SEM showed that the calcium-based materials such as lipscombite and dolomite were the key to the adsorption of malachite green by Ca-CG, and the main mechanisms for the adsorption of malachite green by Ca-CG are surface precipitation, electrostatic action, and chelation reaction. Ca-CG adsorption has great potential for the removal of dye wastewater.

Hydrogels Based on Chitosan and Nanoparticles and Their Suitability for Dyes Adsorption from Aqueous Media: Assessment of the Last-Decade Progresses

Water is one of the fundamental resources for the existence of humans and the environment. Throughout time, due to urbanization, expanding population, increased agricultural production, and intense industrialization, significant pollution with persistent contaminants has been noted, placing the water quality in danger. As a consequence, different procedures and various technologies have been tested and used in order to ensure that water sources are safe for use. The adsorption process is often considered for wastewater treatment due to its straightforward design, low investment cost, availability, avoidance of additional chemicals, lack of undesirable byproducts, and demonstrated significant efficacious potential for treating and eliminating organic contaminants. To accomplish its application, the need to develop innovative materials has become an essential goal. In this context, an overview of recent advances in hydrogels based on chitosan and nanocomposites and their application for the depollution of wastewater contaminated with dyes is reported herein. The present review focuses on (i) the challenges raised by the synthesis process and characterization of the different hydrogels; (ii) the discussion of the impact of the main parameters affecting the adsorption process; (iii) the understanding of the adsorption isotherms, kinetics, and thermodynamic behavior; and (iv) the examination of the possibility of recycling and reusing the hydrogels.

Green calcium-based photocatalyst derived from waste marble powder for environmental sustainability: A review on synthesis and application in photocatalysis

Calcium, with its excellent adsorptive property and higher permissible limits in the environment, emerges as an effective wastewater treatment earth metal. Most of the catalysts, photocatalysts, and adsorbents reported in the literature have heavy metal complex, which creates a leaching problem. Majorly, precursors used for the synthesis of heterogeneous catalysts for wastewater treatment are costly. Therefore, the use of such precursors would be not suitable and feasible approach from an economic point of view. This review work is focused on giving an overview of the utilisation of calcium-based catalysts (adsorbents and photocatalyst) for the removal/degradation of various types of dye water pollutants and summarises the reported effects of calcium as a base on the removal efficiency of dopants. In this article, an extensive literature survey is presented on the various photocatalysts developed and the different syntheses involved in their preparation. As the utilisation of marble powder is a green sustainable approach, the scope of various calcium-based photocatalysts and their application is presented. This article also aims for the elementary and inclusive determination of the effect of introducing calcium as a base for different catalysts and adsorbents.

Isotherm, Thermodynamics, and Kinetics of Methyl Orange Adsorption onto Magnetic Resin of Chitosan Microspheres

Severe environmental pollution problems arising from toxic dyestuffs (e.g., methyl orange) are receiving increasing attention. Therefore, dyes' safe removal has become a research hotspot. Among the many physical-chemical removal techniques, adsorption using renewable biological resources has proved to be more advantageous over others due to its effectiveness and economy. Chitosan is a natural, renewable biopolymer obtained by deactivated chitin. Thus, the magnetic resin of chitosan microspheres (MRCM), prepared by reversed-phase suspension cross-linking polymerization, was used to remove methyl orange from a solution in a batch adsorption system. The main results are as follows: (1) The results of physical and swelling properties of MRCM indicated that MRCM was a type of black spherical, porous, water-absorbing, and weak alkali exchange resin, and it had the ability to adsorb methyl orange when it was applied in solutions above pH 2.0. (2) In batch adsorption studies, the maximum adsorption capacity was obtained at pH 5; the adsorption equilibrium time was 140 min; and the maximum adsorption was reached at 450 mg/L initial concentration. (3) Among the three isotherm adsorption models, Langmuir achieved the best fit for the adsorption of methyl orange onto MRCM. (4) The adsorption thermodynamics indicated that the adsorption was spontaneous, with increasing enthalpy, and was driven by the entropy. (5) The pseudo-second-order kinetics equation was most suitable to describe the adsorption kinetics, and the adsorption kinetics was also controlled by the liquid-film diffusion dynamics. Consequently, MRCM with relatively higher methyl orange adsorption exhibited the great efficiency for methyl orange removal as an environment-friendly sorbent. Thus, the findings are useful for methyl orange pollution control in real-life wastewater treatment applications.

Regeneration and reuse of salt-tolerant zwitterionic polymer fluids by simple salt/water system

Highly-efficient separation of adsorbent and pollutant from chemical sludge is urgent for the recycled materials and chemical resources and minimization of sludge production in industry. Herein, an effortless and cost-efficient salt/water system is developed for efficient zwitterionic polymer/dye separation from chemical sludge. To achieve this aim, a novel salt-tolerant zwitterionic polymer (STZP) is synthesized through etherifying 2-chloro-4,6-bis(4-carboxyphenyl amino)-1,3,5-triazine onto corn starch. It is found that "all-surface-area" adsorption of dye can be achieved by in-situ sol-gel transition of STZP. Spent polymer fluid and solid-state dye can be easily regenerated and separated from sewage sludge by a simple salt/water system. At a high NaCl concentration (225 g/L), the separation factor between zwitterionic polymer and dye is up to 50.4, which is 50 times larger than that of salt-free solution. More importantly, the regenerated polymer fluids exhibit an outstanding reusability ability and can maintain over 92.8% decoloration efficiency for dyeing effluent after multiple adsorption-desorption cycles. This study thus provides a technically feasible and economically acceptable strategy for the recycling and reuse of polymer from hazardous textile sludge waste, greatly promising to achieve zero emissions toward conventional adsorption units.

Use of a new zwitterionic cellulose derivative for removal of crystal violet and orange II from aqueous solutions

This study describes the synthesis of a new bioadsorbent with zwitterionic characteristics and its successful application for removal of a cationic dye (crystal violet, CV) and an anionic dye (orange II, OII) from single component aqueous systems. The new bi-functionalized cellulose derivative (MC3) was produced by chemical modification of cellulose with succinic anhydride and choline chloride to introduce carboxylic and quaternary ammonium functional groups on the cellulose surface. MC3 was characterized by several wet chemical and spectroscopic methods. The effects of solution pH, contact time, and initial solute concentration on removal of CV and OII by MC3 were investigated. Studies of the desorption and re-adsorption of the dyes were also carried out. The isotherms for adsorption of CV and OII on MC3 were satisfactorily fitted using the Konda and Langmuir models. MC3 showed experimental maximum adsorption capacities of 2403 mg g^-1 for CV and 201 mg g^-1 for OII. The desorption and re-adsorption results showed that MC3 could be reused in successive adsorption cycles, which is essential for minimizing process costs and waste generation. The findings showed that MC3 is a versatile biosorbent capable of efficiently removing both cationic and anionic dyes.

Theranostic Platforms Based on Silica and Magnetic Nanoparticles Containing Quinacrine, Chitosan, Fluorophores, and Quantum Dots

In this paper, we describe the synthesis of multilayer nanoparticles as a platform for the diagnosis and treatment of ischemic injuries. The platform is based on magnetite (MNP) and silica (SNP) nanoparticles, while quinacrine is used as an anti-ischemic agent. The synthesis includes the surface modification of nanoparticles with (3-glycidyloxypropyl)trimethoxysilane (GPMS), the immobilization of quinacrine, and the formation of a chitosan coating, which is used to fix the fluorophore indocyanine green (ICG) and colloidal quantum dots AgInS₂/ZnS (CQDs), which serve as secondary radiation sources. The potential theranostic platform was studied in laboratory animals.

Removal of Phosphates in Aqueous Solution by Adsorption on Calcium Oxide

The aim of this work is the removal of phosphates from an aqueous solution by adsorption on a new, inexpensive adsorbent, calcium oxide. We have also shown interest in the choice of removal method, which is adsorption. The kinetic study of the removal of phosphate ions by adsorption on calcium oxide allowed us to calculate the value of adsorption capacity as a function of the parameters affecting adsorption: Amount of adsorbent, initial concentration of phosphate ion solution, pH of the mixture and temperature. The study of adsorption isotherms showed that the Freundlich model is the most appropriate for the phenomenon of phosphate ion adsorption. Modeling of the kinetic data by the pseudo-first order and pseudo-second order equations shows that the adsorption process is best described by the second order equation. Thermodynamic parameters such as enthalpy ΔH°, entropy ΔS° and free enthalpy ΔG° were also evaluated to determine the nature of adsorption. The results show that the adsorption process is a spontaneous and endothermic physisorption.

Effective multi-functional biosorbent derived from corn stalk pith for dyes and oils removal

In this study, malic acid-modified corn stalk pith (MA-CSP) was prepared as an environmentally friendly multi-functional bio-sorbent for adsorbing of dyes and oils. The sorption capacity of the MA-CSP for single and binary dyes is 328.46 mg/g - 566.27 mg/g. In addition, the MA-CSP also had good sorption for lubricating oil, soybean oil, diesel oil, and isopropyl alcohol, which were 37.2 g/g, 44.1 g/g, 33.8 g/g, and 29.3 g/g, respectively. Physical and statistical models were used to analyze the adsorption behavior of methylene blue (MB) and crystal violet (CV). And its sorption behavior for dyes was also affected by the co-existing salts in water. The sorption mechanism of the dye was mainly electrostatic attraction and hydrogen bonding action. The sorption of oil was primarily via the role of van der Waals force and hydrophobic interaction. The MA-CSP, as an eco-friendly, economical and efficient multi-functional sorbent, holds promise for effective dyes and oil removal from contaminated water, and its application in other fields is also highly anticipated.

Recyclable magnetic chitosan microspheres with good ability of removing cationic dyes from aqueous solutions

Sr_3.8Fe_25.7O_70.4-chitosan magnetic microparticles (Sr_3.8Fe_25.7O_70.4-CMNs) with a core-shell structure were synthesized, characterized and applied for the removal of two model cationic dyes. The results showed that these magnetic microparticles possess fast adsorption rate and high adsorption efficiency for both crystal violet (CV) and basic red 9 (BR9) at a temperature ranging 30 °C to 40 °C and suitable pH range (pH ≥ 7). The maximum removal efficiency for CV and BR9 attained to 94.5% and 97.5% in 30 min, which was significantly faster and higher than that of chitosan (<50% in 60 min) (P<0.01). And its maximum adsorption capacity for CV and BR9 reached 29.46 mg/g and 32.16 mg/g, respectively. The adsorption process of Sr_3.8Fe_25.7O_70.4-CMNs follows the Langmuir isotherm with a high correlation coefficient (R² > 0.97) and the pseudo-second-order model. Additionally, the synthesized Sr_3.8Fe_25.7O_70.4-CMNs were easy to regeneration and reuse, and the removal rate remained above 90% after 5 recycle times. This study would provide a new more environmental friendly material and method for the treatment of wastewater containing toxic dyes.

Synthesis of a novel arginine-modified starch resin and its adsorption of dye wastewater

In this work, corn starch (St) was firstly grafted with polyacrylamide (PAM) to obtain StAM, which was subsequently immobilized with arginine to obtain a guanidine-containing starch-based resin, StAM–Arg. The synthesized products were characterized via Fourier transform infrared spectroscopy (FT-IR), ¹³C-NMR nuclear magnetic resonance (¹³C-NMR), scanning electron microscopy (SEM), X-ray diffraction (XRD), gel permeation chromatography (GPC), X-ray photoelectron spectroscopy (XPS) and thermogravimetric analysis (TGA). StAM–Arg exhibited a significantly enhanced adsorption capacity for acid fuchsin (AF), acid orange G (AOG), and acid blue 80 (AB80) compared with zeolite, diatomite, St and StAM, and it also exhibited broad-spectrum adsorption for different dyes. Weak acidic conditions were favorable for the resin to adsorb acid dyes. The decolorization rate (DR) by StAM–Arg for mixed wastewater reached 82.49%, which was higher than that of activated carbon (DR = 58.09%). StAM–Arg showed high resistance to microbial degradation, resulting in significantly improved structural stability for the resin. Its antibacterial rate (AR) for E. coli was up to 99.73%. After 7 days in simulated natural water, the weight loss ratio (WR) of StAM–Arg was 14.5%, which was much lower than that of St (WR = 66.53%). The introduced guanidine groups were considered to be the major reason for the observed improvements. Furthermore, the cationic guanidine could trap the acid dyes via ion-exchange reactions, while effectively inhibiting or eliminating the growth of bacteria on the adsorbent surface. The above advantages, including good dyestuff adsorption properties, high structural stability and prolonged service life, make StAM–Arg overcome the inherent drawbacks of the existing natural polymer adsorbents and have good application prospect in the treatment of textile wastewater.

In the side reaction, the two aldehyde groups in the glutaraldehyde molecules should undergo an aldol condensation reaction with the hydroxyl group in the starch molecule, which has been corrected.

Adsorption of divalent cadmium by calcified iron-embedded carbon beads

A novel iron-embedded carbon bead was prepared by the calcination of a calcium alginate gel bead mixed with iron nanoparticles coated by polydopamine. The prepared iron-embedded carbon bead was characterized by infrared spectrum analysis, X-ray diffraction, Raman spectroscopy, vibrating sample magnetometry, X-ray photoelectron spectroscopy, scanning electron microscopy and transmission electron microscopy. It was discovered that the novel structure efficaciously prevented the agglomeration of iron nanoparticles. Additionally, the effects of dose, pH, exposure time, temperature and initial concentration on the adsorption of Cd(ii) were studied, and the reusability of the material was analyzed. Fe/SA-C showed high Cd(ii) removal capability (220.3, 225.7, 240.8 mg g⁻¹ at 288, 298, 308 K), easy recoverability and high stability. In addition, some slightly different interpretations of the adsorption mechanism are given. This study clearly revealed that Fe/SA-C has potential application in the removal of Cd(ii).

The material structure could prevent Fe nanoparticle agglomeration during synthesis and maintain Fe stability during adsorption. Fe/SA-C had a superior adsorption property and easy recoverability.

Superior adsorption capacity of functionalised straw adsorbent for dyes and heavy-metal ions

Dyes and heavy-metal ions are common pollutants in printing and dyeing wastewater, and are thus attracting considerable attention. Herein, an eco-friendly straw-based adsorbent, WS-CA-AM, was prepared by grafting with acrylamide (AM) and citric acid (CA) groups to remove representative dyes and heavy metals from aqueous solution. The adsorption capacities of WS-CA-AM for methyl orange (MO) and methylene blue (MB) were 3053.48 and 120.84 mg/g, which were 54 and 3 times those of unmodified straw, respectively. Moreover, the adsorption capacities for MB, MO, Cr₂O₇^2- and Cu²⁺ in the mixed system increased by 210%, 133%, 196% and 151%, respectively, compared with those in the single system. The significant increase in adsorption capacity can be attributed to the collaborative effect through electrostatic attraction. The functional groups and adsorbed pollutants all served as adsorption sites for pollutants. These results indicate that WS-CA-AM is a potential applicant for the removal of dyes and heavy-metal ions from mixed aqueous solution.