Pectin-based silver nanocomposite film for transdermal delivery of Donepezil

The donepezil transdermal system for the treatment of patients with mild, moderate, or severe Alzheimer's disease: a critical review

INTRODUCTION

Cholinesterase inhibitors, along with memantine, are the mainstay of symptomatic treatment for AD (Alzheimer's disease); however, these medications are typically administered orally, which can be difficult for people with AD and their caregivers.

AREAS COVERED

In this drug profile and narrative review, the authors trace the development of the new FDA-approved transdermal donepezil. The authors discuss the studies showing its bioequivalence with the oral formulation, including two double-blinded placebo controlled non-inferiority trials. The authors also compare the patch to the only other transdermal cholinesterase inhibitor on the market, rivastigmine, and highlight the potential advantages and disadvantages between these two treatments.

EXPERT OPINION

While the patch is bio-equivalent, it is rather large and may not be affordable for some patients. In addition, there is no high dose (e.g. 23 mg) equivalent. Nevertheless, transdermal donepezil will be useful for people with AD and their caregivers, given its effectiveness and potential convenience.

Translation from Preclinical Research to Clinical Trials: Transdermal Drug Delivery for Neurodegenerative and Mental Disorders

Neurodegenerative diseases (NDs), particularly dementia, provide significant problems to worldwide healthcare systems. The development of therapeutic materials for various diseases has a severe challenge in the form of the blood-brain barrier (BBB). Transdermal treatment has recently garnered widespread favor as an alternative method of delivering active chemicals to the brain. This approach has several advantages, including low invasiveness, self-administration, avoidance of first-pass metabolism, preservation of steady plasma concentrations, regulated release, safety, efficacy, and better patient compliance. Topics include the transdermal method for therapeutic NDs, their classification, and the mechanisms that allow the medicine to enter the bloodstream through the skin. The paper also discusses the obstacles and potential outcomes of transdermal therapy, emphasizing the benefits and drawbacks of different approaches.

Functionalization of sterculia gum for making platform hydrogels via network formation for use in drug delivery

Recently, various advancements have been made in the development of functional polymeric materials for innovative applications. Herein this work, functionalization of sterculia gum (SG) was carried out via grafting of poly(2-(methacryloyloxy) ethyltrimethylammonium chloride) (METAC)-polyvinyl pyrrolidone (PVP) to develop hydrogel dressings as a platform for use in drug delivery (DD). The innovation of the present work is the exploration of inherent antioxidant and antimicrobial properties of the SG along with antimicrobial characteristic of poly(METAC) and PVP, to design the doxycycline encapsulated hydrogel dressings for better wound healing. FESEM, EDS and AFM analyzed the surface morphology of hydrogels. FTIR, 13C NMR and XRD inferred inclusion of poly(METAC)-PVP into polymers. 13C NMR confirmed the incorporation of poly(METAC) and PVP onto gum by the presence of a peak at 54.74 ppm because of methyl carbon attached to quaternary nitrogen of poly(METAC) and at 45.48 ppm due to the ring carbon of PVP along with FTIR peak at 949 cm-1 because of CN bending of quaternary nitrogen of poy (METAC). Thermal characterization of copolymers has been performed using TGA analysis. One gram of copolymeric hydrogel dressing absorbed 6.51 ± 0.03 g simulated salivary fluid (SSF) and 7.65 ± 0.03 g simulated wound fluid (SWF). Release of doxycycline drug occurred in a sustained manner and followed the Non-Fickian diffusion mechanism from hydrogels. The release profile was most effectively described by Hixon-Crowell kinetic model. Hydrogel demonstrated biocompatibility and expressed thrombogenicity 79.7 ± 4.9 % during its polymer-blood interactions. Copolymer revealed mucoadhesive property, requiring a force of 77.00 ± 0.01 mN to detach from bio-membrane. Additionally, it exhibited antioxidant features, showing 43.81 ± 0.286 % free radical scavenging. Hydrogel dressings were mechanically stable and revealed 0.76 ± 0.09 N mm-2 tensile strength and 9.18 ± 0.01 N burst strength. Polymer films were permeable to oxygen and water vapor and were impermeable to microorganisms. Hydrogel dressings exhibited antimicrobial properties against Pseudomonas aeruginosa and Staphylococcus aureus bacteria. Overall, these properties displayed the suitability of hydrogels for wound dressing (WD) applications which may actively enhance wound healing.

Single-Walled (Magnetic) Carbon Nanotubes in a Pectin Matrix in the Design of an Allantoin Delivery System

Single-walled carbon nanotubes (SWCNTs) outperform other materials due to their high conductivity, large specific surface area, and chemical resistance. They have numerous biomedical applications, including the magnetization of the SWCNT (mSWCNT). The drug loading and release properties of see-through pectin hydrogels doped with SWCNTs and mSWCNTs were evaluated in this study. The active molecule in the hydrogel structure is allantoin, and calcium chloride serves as a cross-linker. In addition to mixing, absorption, and swelling techniques, drug loading into carbon nanotubes was also been studied. To characterize the films, differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, surface contact angle measurements, and opacity analysis were carried out. Apart from these, a rheological analysis was also carried out to examine the flow properties of the hydrogels. The study was also expanded to include N-(9-fluorenyl methoxycarbonyl)glycine-coated SWCNTs and mSWCNTs as additives to evaluate the efficiency of the drug-loading approach. Although the CNT additive was used at a 1:1000 weight ratio, it had a significant impact on the hydrogel properties. This effect, which was first observed in the thermal properties, was confirmed in rheological analyses by increasing solution viscosity. Additionally, rheological analysis and drug release profiles show that the type of additive causes a change in the matrix structure. According to TGA findings, even though SWCNTs and mSWCNTs were not coated more than 5%, the coating had a significant effect on drug release control. In addition to all findings, cell viability tests revealed that hydrogels with various additives could be used for visual wound monitoring, hyperthermia treatment, and allantoin release in wound treatment applications.

Pectin wrapped halloysite nanotube reinforced Polycaprolactone films for potential wound healing application

The current research work focuses on preparing the polycaprolactone (PCL) based nanocomposite films embedded with surface modified Halloysite Nanotube (HNT). The avenue of the study is to unravel the applicability of polymer nanocomposites for wound healing. The flexible property of HNT was taken as the major force to accomplish the addition of biopolymer pectin onto its surface. Functionalization of HNT with pectin has certainly enhanced its binding nature with the polymer. The PCL nanocomposite films were characterized by several promising techniques such as FTIR, XRD, DSC-TGA, FESEM, TEM, AFM, and mechanical properties were too examined along. When compared to the plane PCL film, the nanocomposite films manifested favorable results in terms of mechanical and chemical properties. Additionally, biometric studies such as in-vitro swelling, enzymatic degradation, and hemolysis performed on the films gave extremely good results. The haemolytic percentage recorded for the films exhibited a steady decrease with increasing amount of nanofillers. The MTT assay showed cell proliferation and its increase as the embedded HNT is more in the matrix. Wound closure study performed on NIH3T3 cell line with 1, 3 and 5wt% of films has given a strong proof for the involvement of polymer and HNT in the healing procedure.

Advances in reparative materials for infectious bone defects and their applications in maxillofacial regions

Infectious bone defects are characterized by the partial loss or destruction of bone tissue resulting from bacterial contaminations subsequent to diseases or external injuries. Traditional bone transplantation and clinical methods are insufficient in meeting the treatment demands for such diseases. As a result, researchers have increasingly focused on the development of more sophisticated biomaterials for improved therapeutic outcomes in recent years. This review endeavors to investigate specific reparative materials utilized for the treatment of infectious bone defects, particularly those present in the maxillofacial region, with a focus on biomaterials capable of releasing therapeutic substances, functional contact biomaterials, and novel physical therapy materials. These biomaterials operate via heightened antibacterial or osteogenic properties in order to eliminate bacteria and/or stimulate bone cells regeneration in the defect, ultimately fostering the reconstitution of maxillofacial bone tissue. Based upon some successful applications of new concept materials in bone repair of other parts, we also explore their future prospects and potential uses in maxillofacial bone repair later in this review. We highlight that the exploration of advanced biomaterials holds promise in establishing a solid foundation for the development of more biocompatible, effective, and personalized treatments for reconstructing infectious maxillofacial defects.

A review on nanotechnological perspective of "the amyloid cascade hypothesis" for neurodegenerative diseases

Neurodegenerative diseases (NDs) are characterized by progressive degeneration of neurons which deteriorates the brain functions. An early detection of the onset of NDs is utmost important, as it will provide the fast treatment strategies to prevent further progression of the disease. Conventionally, accurate diagnosis of the brain related disorders is difficult in their early phase. To solve this problem, nanotechnology based neurofunctional imaging and biomarker detection techniques have been developed which allows high specificity and sensitivity towards screening and diagnosis of NDs. Another challenge to treat the brain related disorders is to overcome the complex integrity of blood-brain-barrier (BBB) for the delivery of theranostic agents. Fortunately, utilization of nanomaterials has been pursued as promising strategy to address this challenge. Herein, we critically highlighted the recent improvements in the field of neurodiagnostic and therapeutic approaches involving innovative strategies for diagnosis, and inhibition of protein aggregates. We have provided particular emphasis on the use of nanotechnology which can push forward the blooming research growth in this field to win the battle against devastating NDs.

Development of mucoadhesive Timolol loaded chitosan-nanocomposite to treat glaucoma

Timolol Maleate is an aqueous soluble β-blocker antiglaucoma drug used to suppress intraocular pressure. Several commercially available ocular formulations are not effective in delivering to the target site due to their water-soluble property and low mucoadhesiveness. Hence, there is a requirement for a highly mucoadhesive drug-loaded nanocomposite to suppress intraocular pressure with enhanced bioavailability. Herein, we have prepared a mucoadhesive Timolol-loaded graphene quantum dot-chitosan-nanocomposite to treat glaucoma in response to lysozyme, secreted in the tear fluid. The as-prepared nanocomposite has been characterized through high resolution-transmission electron microscopic, X-ray photoelectron spectroscopic, X-ray diffraction, and Fourier transform infrared spectral studies. The nanocomposite showed 93.74 % encapsulation efficiency with a loading capacity of 7.73 %. Further, 89.26 %, 95.62 %, and 99.29 % of drug release were observed from the nanocomposite in the presence of 1, 1.5, and 2 mg/mL of lysozyme. The mucoadhesion property has been confirmed by the increment in the particle size, fluorescence spectral variations, and Fourier transform infrared spectroscopic studies in the presence of mucin nanoparticles of size 291 nm. Interestingly, mucoadhesion has been demonstrated by pointing to the quenching in the luminescence of mucin. Further, in vitro biocompatibility assay on human corneal epithelial cells showed ≥80 % cell viability. Hence, this study offers the utilization of naturally secreting enzymes for drug delivery applications instead of uncontrolled pH and temperature-triggered releases.

Exploration of inorganic nanoparticles for revolutionary drug delivery applications: a critical review

The nanosystems for delivering drugs which have evolved with time, are being designed for greater drug efficiency and lesser side-effects, and are also complemented by the advancement of numerous innovative materials. In comparison to the organic nanoparticles, the inorganic nanoparticles are stable, have a wide range of physicochemical, mechanical, magnetic, and optical characteristics, and also have the capability to get modified using some ligands to enrich their attraction towards the molecules at the target site, which makes them appealing for bio-imaging and drug delivery applications. One of the strong benefits of using the inorganic nanoparticles-drug conjugate is the possibility of delivering the drugs to the affected cells locally, thus reducing the side-effects like cytotoxicity, and facilitating a higher efficacy of the therapeutic drug. This review features the direct and indirect effects of such inorganic nanoparticles like gold, silver, graphene-based, hydroxyapatite, iron oxide, ZnO, and CeO2 nanoparticles in developing effective drug carrier systems. This article has remarked the peculiarities of these nanoparticle-based systems in pulmonary, ocular, wound healing, and antibacterial drug deliveries as well as in delivering drugs across Blood-Brain-Barrier (BBB) and acting as agents for cancer theranostics. Additionally, the article sheds light on the plausible modifications that can be carried out on the inorganic nanoparticles, from a researcher's perspective, which could open a new pathway.

Porous Deproteinized Natural Rubber Film Loaded with Silver Nanoparticles for Topical Drug Delivery

The work demonstrated the use of natural rubber for topical drug delivery. The first objective was to fabricate a porous deproteinized natural rubber film loaded with silver nanoparticles. Characterizing and assessing its formulation was the second objective. Surface pH, mechanical properties, swelling ratio, erosion, moisture vapor transmission rate, scanning electron microscopy/energy dispersive X-ray analysis, and X-ray diffraction were evaluated. In vitro studies and antibacterial activity were assessed. It was discovered that silver nanoparticles could enter the film and that their concentrations ranged between 7.25 and 21.03 µg/cm2. The pH of the film's surface was 7.00. The mechanical properties of the film with silver nanoparticle loading differed from the blank film. After adding silver nanoparticles, the film eroded faster than before, but the swelling ratio was not affected significantly. Increased time utilization had an impact on the moisture vapor transmission rate of the film. Silver nanoparticles released easily from the film while there was less permeability. The dead pig-ear skin had significant silver nanoparticle accumulation. Potent antibacterial activity was seen in the film containing silver nanoparticles. The silver nanoparticle-loaded film may be used as a wound dressing for a topical film that promotes wound healing while also protecting the area from infection.

Antimicrobial and anti-biofilm activities of bio-inspired nanomaterials for wound healing applications

Chronic wounds are ubiquitously inhabited by bacteria, and they remain a challenge as they cause significant discomfort and because their treatment consumes huge clinical resources. To reduce the burden that chronic wounds place upon both patients and health services, a wide variety of approaches have been devised and investigated. Bioinspired nanomaterials have shown great success in wound healing when compared to existing approaches, showing better ability to mimic natural extracellular matrix (ECM) components and thus to promote cell adhesion, proliferation, and differentiation. Wound dressings that are based on bioinspired nanomaterials can be engineered to promote anti-inflammatory mechanisms and to inhibit the formation of microbial biofilms. We consider the extensive potential of bioinspired nanomaterials in wound healing, revealing a scope beyond that covered previously.

Pectin-like polysaccharide extracted from leaves Crataeva tapia promotes antioxidant, immunomodulatory and emulsifiers applied in therapeutic formulations

The objective of this work was to isolate a polysaccharide similar to pectin from Crataeva tapia leaves, not yet reported in the literature, and to evaluate its antioxidant, cytotoxic and immunomodulatory profile. Pectin was extracted from the leaves in three stages, organic solvent followed by acidified water and ethanol precipitation. With the pectin obtained, the physicochemical characterization of the molecule was carried out using high-performance liquid chromatography, Fourier-transform infrared spectroscopy, nuclear magnetic resonance (13C and 1H) and different thermal and elemental analysis. Furthermore, the antioxidant activities were evaluated in vitro, and using human peripheral blood mononuclear cell culture, cytotoxicity and immunostimulatory actions were investigated. Physical and chemical analyses showed characteristic signs of pectin. Antioxidant activity tests showed that pectin had moderate to low antioxidant activity. Furthermore, pectin did not affect the viability of erythrocytes and PBMC and induced an immunostimulatory state when it promoted the production of cytokines IL-6, IL-10 and TNF-α and increased the activation of CD8 + T lymphocytes. This study showed that pectin from Crataeva tapia is not cytotoxic and promoted a pro-inflammatory profile in peripheral blood mononuclear cell with application as an immunostimulating and emulsifying compound.

Pharmaceutical and drug delivery applications of pectin and its modified nanocomposites

Due to their natural availability, biocompatibility, biodegradability, nontoxicity, flexibility, as well as improved structural and functional characteristics, pectin and pectin-based nanocomposites have become an interesting area of numerous researchers. Pectin is a polysaccharide that comes from plants and is used in a variety of products. The significance of pectin polysaccharide and its modified nanocomposites in a number of applications has been shown in numerous reviews. On their uses in pharmaceutical and medication delivery, there are, however, few review publications. The majority of papers on pectin polysaccharide do not structure their explanations of drug distribution and medicinal application. The biological application of pectin nanocomposite is also explained in this review, along with a recent publication. As a result, the goal of this review was in-depth analysis to summarize biological application of pectin and its modified nanocomposites. Due to their exceptional physicochemical and biological characteristics, pectin and its nanocomposites are remarkable materials for medicinal applications. In addition to enhancing the immune system, controlling blood cholesterol, and other things, they have been shown to have anticancer, antidiabetic, antioxidant, anti-inflammatory, immunomodulatory, and antibacterial properties. Because of their biocompatibility and properties that allow for regulated release, they have also received a lot of interest as drug carriers in targeted drug delivery systems. They have been used to administer medications to treat cancer, inflammation, pain, Alzheimer's, bacteria, and relax muscles. This review found that pectin and its derivatives have better drug delivery efficiency and are viable candidates for a wide range of medicinal applications. It has been advised to conduct further research on the subject of toxicity in order to produce commercial formulations that can serve as both therapeutic agents and drug carriers.

Metal-based nano-delivery platform for treating bone disease and regeneration

Owing to their excellent characteristics, such as large specific surface area, favorable biosafety, and versatile application, nanomaterials have attracted significant attention in biomedical applications. Among them, metal-based nanomaterials containing various metal elements exhibit significant bone tissue regeneration potential, unique antibacterial properties, and advanced drug delivery functions, thus becoming crucial development platforms for bone tissue engineering and drug therapy for orthopedic diseases. Herein, metal-based drug-loaded nanomaterial platforms are classified and introduced, and the achievable drug-loading methods are comprehensively generalized. Furthermore, their applications in bone tissue engineering, osteoarthritis, orthopedic implant infection, bone tumor, and joint lubrication are reviewed in detail. Finally, the merits and demerits of the current metal-based drug-loaded nanomaterial platforms are critically discussed, and the challenges faced to realize their future applications are summarized.

Polysaccharide-Based Transdermal Drug Delivery

Materials derived from natural plants and animals have great potential for transdermal drug delivery. Polysaccharides are widely derived from marine, herbal, and microbial sources. Compared with synthetic polymers, polysaccharides have the advantages of non-toxicity and biodegradability, ease of modification, biocompatibility, targeting, and antibacterial properties. Currently, polysaccharide-based transdermal drug delivery vehicles, such as hydrogel, film, microneedle (MN), and tissue scaffolds are being developed. The addition of polysaccharides allows these vehicles to exhibit better-swelling properties, mechanical strength, tensile strength, etc. Due to the stratum corneum’s resistance, the transdermal drug delivery system cannot deliver drugs as efficiently as desired. The charge and hydration of polysaccharides allow them to react with the skin and promote drug penetration. In addition, polysaccharide-based nanotechnology enhances drug utilization efficiency. Various diseases are currently treated by polysaccharide-based transdermal drug delivery devices and exhibit promising futures. The most current knowledge on these excellent materials will be thoroughly discussed by reviewing polysaccharide-based transdermal drug delivery strategies.

Swelling, Protein Adsorption, and Biocompatibility In Vitro of Gel Beads Prepared from Pectin of Hogweed Heracleum sosnówskyi Manden in Comparison with Gel Beads from Apple Pectin

The study aims to develop gel beads with improved functional properties and biocompatibility from hogweed (HS) pectin. HS4 and AP4 gel beads were prepared from the HS pectin and apple pectin (AP) using gelling with calcium ions. HS4 and AP4 gel beads swelled in PBS in dependence on pH. The swelling degree of HS4 and AP4 gel beads was 191 and 136%, respectively, in PBS at pH 7.4. The hardness of HS4 and AP4 gel beads reduced 8.2 and 60 times, respectively, compared with the initial value after 24 h incubation. Both pectin gel beads swelled less in Hanks’ solution than in PBS and swelled less in Hanks’ solution containing peritoneal macrophages than in cell-free Hanks’ solution. Serum protein adsorption by HS4 and AP4 gel beads was 118 ± 44 and 196 ± 68 μg/cm² after 24 h of incubation. Both pectin gel beads demonstrated low rates of hemolysis and complement activation. However, HS4 gel beads inhibited the LPS-stimulated secretion of TNF-α and the expression of TLR4 and NF-κB by macrophages, whereas AP4 gel beads stimulated the inflammatory response of macrophages. HS4 gel beads adsorbed 1.3 times more LPS and adhered to 1.6 times more macrophages than AP4 gel beads. Thus, HS pectin gel has advantages over AP gel concerning swelling behavior, protein adsorption, and biocompatibility.

Extraction and Characterization of Pectin from Jerusalem ArtiChoke Residue and Its Application in Blueberry Preservation

To prolong the storage period of blueberry and improve its shelf-life quality, an edible coating based on chitosan was developed, and different contents of pectin were added to the coating. In this study, Jerusalem artichoke residue was used as a source of pectin, which is a byproduct of the processing of inulin. The extracted pectin has a low cost and high quality, which is very suitable for the preservation of coating. The coating was prepared and the chemical properties of the coating were characterized by SEM, XRD, TG, and FTIR. The barrier properties of the coating were analyzed by thickness, water content, solubility, and water vapor permeability. The results showed that the pectin coating exhibited excellent performance in blueberry preservation. Following 16 days of storage, the decay and weight loss rates of blueberry treated with 0.2% pectin coating decreased by 33 and 22%, respectively. Moreover, the organic acid consumption of the coated blueberry slowed and the anthocyanins were better preserved. As a low-cost, safe, and efficient technology, the pectin chitosan composite coating has significant potential in the berries preservation industry.

Characterization and Biocompatibility Properties In Vitro of Gel Beads Based on the Pectin and κ-Carrageenan

This study aimed to investigate the influence of kappa (κ)-carrageenan on the initial stages of the foreign body response against pectin gel. Pectin-carrageenan (P-Car) gel beads were prepared from the apple pectin and κ-carrageenan using gelling with calcium ions. The inclusion of 0.5% κ-carrageenan (Car0.5) in the 1.5 (P1.5) and 2% pectin (P2) gel formulations decreased the gel strength by 2.5 times. Car0.5 was found to increase the swelling of P2 gel beads in the cell culture medium. P2 gel beads adsorbed 30–42 mg/g of bovine serum albumin (BSA) depending on pH. P2-Car0.2, P2-Car0.5, and P1.5-Car0.5 beads reduced BSA adsorption by 3.1, 5.2, and 4.0 times compared to P2 beads, respectively, at pH 7. The P1.5-Car0.5 beads activated complement and induced the haemolysis less than gel beads of pure pectin. Moreover, P1.5-Car0.5 gel beads allowed less adhesion of mouse peritoneal macrophages, TNF-α production, and NF-κB activation than the pure pectin gel beads. There were no differences in TLR4 and ICAM-1 levels in macrophages treated with P and P-Car gel beads. P2-Car0.5 hydrogel demonstrated lower adhesion to serous membrane than P2 hydrogel. Thus, the data obtained indicate that the inclusion of κ-carrageenan in the apple pectin gel improves its biocompatibility.

Recent advancements in synthesis and drug delivery utilization of polysaccharides-based nanocomposites: The important role of nanoparticles and layered double hydroxides

Drug delivery systems are explained as methods to deliver a specific drug to desired organs, tissues, and cells for drug release to diseases treatment. Recently, considerable development has been interested in stimuli-responsive nano-systems, which respond to the essential pathological and physicochemical issues in diseased sites. During the last decades, researchers in the world presented, investigated, and implemented novel different nanomaterials with a focus on developing drug delivery. Polysaccharides including chitosan, alginate, hyaluronic acid, gums, and cellulose, as natural bio-materials, are suitable candidates for designing and formulations of these nano-systems because of the outstanding merits such as bio-compatibility, bio-degradability, non-toxicity, and gelling characteristics. On the other side, nanoparticles including metals (Au, Ag), metal oxides (Fe₃O₄, ZnO, CuO), or non-metal oxides (SiO₂) and also, layered double hydroxides nanostructures have appealed significant consideration in the fields of biomedical therapeutics and cancer therapy owing to the bio-compatibility, great surface area, good chemical and mechanical features, and also proper magnetic characteristics. This comprehensive review provides an overview of current advancements in drug delivery strategies, and manufacturing methods using chitosan, alginate, hyaluronic acid, gums, and also, metals, metal oxides, non-metal oxides, and LDHs for delivery system uses.

Transdermal Drug Delivery Systems and Their Use in Obesity Treatment

Transdermal drug delivery (TDD) has recently emerged as an effective alternative to oral and injection administration because of its less invasiveness, low rejection rate, and excellent ease of administration. TDD has made an important contribution to medical practice such as diabetes, hemorrhoids, arthritis, migraine, and schizophrenia treatment, but has yet to fully achieve its potential in the treatment of obesity. Obesity has reached epidemic proportions globally and posed a significant threat to human health. Various approaches, including oral and injection administration have widely been used in clinical setting for obesity treatment. However, these traditional options remain ineffective and inconvenient, and carry risks of adverse effects. Therefore, alternative and advanced drug delivery strategies with higher efficacy and less toxicity such as TDD are urgently required for obesity treatment. This review summarizes current TDD technology, and the main anti-obesity drug delivery system. This review also provides insights into various anti-obesity drugs under study with a focus on the recent developments of TDD system for enhanced anti-obesity drug delivery. Although most of presented studies stay in animal stage, the application of TDD in anti-obesity drugs would have a significant impact on bringing safe and effective therapies to obese patients in the future.

The Factors Determining the Skin Penetration and Cellular Uptake of Nanocarriers: New Hope for Clinical Development

The skin provides a protective barrier against toxic environments and also offers a valuable route for topical drug delivery. The stratum corneum (SC) is the outermost layer of the skin and serves as the major barrier to chemical transfer through the skin. The human skin barrier is particularly difficult to overcome because of the complex composition and structure of the SC. Nanoparticulate carriers have gained widespread attention in topical drug delivery due to their tunable and versatile properties. The present review summarizes the main factors involved in skin penetration of nanocarriers containing the drug. Employment of nanotechnology in topical delivery has grown progressively during recent years; however, it is important to monitor the skin penetration of nanocarriers prior to their use to avoid possible toxic effects. Nanocarriers can act as a means to increase skin permeation of drugs by supporting direct interaction with the SC and increasing the period of permanence on the skin. Skin penetration is influenced by the physicochemical characteristics of nanocarriers such as composition, size, shape, surface chemistry, as well as skin features. Considering that the target of topical systems based on nanocarriers is the penetration of therapeutic agents in the skin layers, so a detailed understanding of the factors influencing skin permeability of nanocarriers is essential for safe and efficient therapeutic applications.

The technology of transdermal delivery nanosystems: from design and development to preclinical studies

Transdermal administration has gained much attention due to the remarkable advantages such as patient compliance, drug escape from first-pass elimination, favorable pharmacokinetic profile and prolonged release properties. However, the major limitation of these systems is the limited skin penetration of the stratum corneum, the skin's most important barrier, which protects the body from the insertion of substances from the environment. Transdermal drug delivery systems are aiming to the disruption of the stratum corneum in order for the active pharmaceutical ingredients to enter successfully the circulation. Therefore, nanoparticles are holding a great promise because they can act as effective penetration enhancers due to their small size and other physicochemical properties that will be analyzed thoroughly in this report. Apart from the investigation of the physicochemical parameters, a comparison between the different types of nanoparticles will be performed. The complexity of skin anatomy and the unclear mechanisms of penetration should be taken into consideration to reach some realistic conclusions regarding the way that the described parameters affect the skin permeability. To the best of the authors knowledge, this is among the few reports on the literature describing the technology of transdermal delivery systems and how this technology affects the biological activity.

Pectin in biomedical and drug delivery applications: A review

Natural macromolecules have attracted increasing attention due to their biocompatibility, low toxicity, and biodegradability. Pectin is one of the few polysaccharides with biomedical activity, consequently a candidate in biomedical and drug delivery Applications. Rhamnogalacturonan-II, a smaller component in pectin, plays a major role in biomedical activities. The ubiquitous presence of hydroxyl and carboxyl groups in pectin contribute to their hydrophilicity and, hence, to the favorable biocompatibility, low toxicity, and biodegradability. However, pure pectin-based materials present undesirable swelling and corrosion properties. The hydrophilic groups, via coordination, electrophilic addition, esterification, transesterification reactions, can contribute to pectin's physicochemical properties. Here the properties, extraction, and modification of pectin, which are fundamental to biomedical and drug delivery applications, are reviewed. Moreover, the synthesis, properties, and performance of pectin-based hybrid materials, composite materials, and emulsions are elaborated. The comprehensive review presented here can provide valuable information on pectin and its biomedical and drug delivery applications.

Cashew apple pectin as a carrier matrix for mangiferin: Physicochemical characterization, in vitro release and biological evaluation in human neutrophils

In this work, cashew apple pectin (CP) of the species Anacardium occidentale L. was used as an encapsulation matrix for hydrophobic drugs. The model drug chosen was mangiferin (Mf), a glycosylated C-xanthone which has antioxidant properties but low solubility in aqueous medium. CP (1-100 μg mL^-1) was not toxic to human neutrophils and also did not significantly interfere with the pro-inflammatory mechanism of these cells in the concentration range of 12.5 and 100 μg mL^-1. The results are promising because they show that pectin encapsulated mangiferin after spray drying presented an efficiency of 82.02%. The results obtained in the dissolution test, simulating the release of mangiferin in the gastrointestinal tract (pH 1.2, 4.6 and 6.8) and using Franz diffusion cells (pH 7.4), showed that cashew pectin may be a promising vehicle in prolonged drug delivery systems for both oral and dermal applications.

Pectin-Based Films with Cocoa Bean Shell Waste Extract and ZnO/Zn-NPs with Enhanced Oxygen Barrier, Ultraviolet Screen and Photocatalytic Properties

In this work, pectin-based active films with a cocoa bean shell extract, obtained after waste valorisation of residues coming from the chocolate production process, and zinc oxide/zinc nanoparticles (ZnO/Zn-NPs) at different concentrations, were obtained by casting. The effect of the active additive incorporation on the thermal, barrier, structural, morphological and optical properties was investigated. Moreover, the photocatalytic properties of the obtained films based on the decomposition of methylene blue (MB) in aqueous solution at room temperature were also studied. A significant increase in thermal and oxidative stability was obtained with the incorporation of 3 wt% of ZnO/Zn-NPs compared to the control film. The addition of 5 wt% cocoa bean shell extract to pectin significantly affected the oxygen barrier properties due to a plasticizing effect. In contrast, the addition of ZnO/Zn-NPs at 1 wt% to pectin caused a decrease in oxygen transmission rate per film thickness (OTR.e) values of approximately 50% compared to the control film, resulting in an enhanced protection against oxidation for food preservation. The optical properties were highly influenced by the incorporation of the natural extract but this effect was mitigated when nanoparticles were also incorporated into pectin-based films. The addition of the extract and nanoparticles resulted in a clear improvement (by 98%) in UV barrier properties, which could be important for packaged food sensitive to UV radiation. Finally, the photocatalytic activity of the developed films containing nanoparticles was demonstrated, showing photodegradation efficiency values of nearly 90% after 60 min at 3 wt% of ZnO/Zn-NPs loading. In conclusion, the obtained pectin-based bionanocomposites with cocoa bean shell waste extract and zinc oxide/zinc nanoparticles showed great potential to be used as active packaging for food preservation.

Silver nanoparticles: Synthesis, investigation techniques, and properties

The unique silver properties, especially in the form of nanoparticles (NPs), allow to utilize them in numerous applications. For instance, Ag NPs can be utilized for the production of electronic and solar energy harvesting devices, in advanced analytical techniques (NALDI, SERS), catalysis and photocatalysis. Moreover, the Ag NPs can be useful in medicine for bioimaging, biosensing as well as in antibacterial and anticancer therapies. The Ag NPs utilization requires comprehensive knowledge about their features regarding the synthesis approaches as well as exploitation conditions. Unfortunately, a large number of scientific articles provide only restricted information according to the objects under investigation. Additionally, the results could be affected by artifacts introduced with exploited equipment, the utilized technique or sample preparation stages. However, it is rather difficult to get information about problems, which may occur during the studies. Thus, the review provides information about novel trends in the Ag NPs synthesis, among which the physical, chemical, and biological approaches can be found. Basic information about approaches for the control of critical parameters of NPs, i.e. size and shape, was also revealed. It was shown, that the reducing agent, stabilizer, the synthesis environment, including trace ions, have a direct impact on the Ag NPs properties. Further, the capabilities of modern analytical techniques for Ag NPs and nanocomposites investigations were shown, among other microscopic (optical, TEM, SEM, STEM, AFM), spectroscopic (UV-Vis, IR, Raman, NMR, electron spectroscopy, XRD), spectrometric (MALDI-TOF MS, SIMS, ICP-MS), and separation (CE, FFF, gel electrophoresis) techniques were described. The limitations and possible artifacts of the techniques were mentioned. A large number of presented techniques is a distinguishing feature, which makes the review different from others. Finally, the physicochemical and biological properties of Ag NPs were demonstrated. It was shown, that Ag NPs features are dependent on their basic parameters, such as size, shape, chemical composition, etc. At the end of the review, the modern theories of the Ag NPs toxic mechanism were shown in a way that has never been presented before. The review should be helpful for scientists in their own studies, as it can help to prepare experiments more carefully.

The production of gel beads of soybean hull polysaccharides loaded with soy isoflavone and their pH-dependent release

Core-shell hydrogel beads were successfully produced from soybean hull polysaccharides (SHP). Using electron microscopy, the beads were found to be spherical with smooth surfaces and have tight gel network internal structures. Fourier transform infrared spectroscopy, differential scanning calorimetry, and X-ray diffraction were used to investigate the interaction between soy isoflavone and SHP in the gel beads mesh-like structure. Furthermore, the encapsulation efficiency and loading capacity of gel beads for soy isoflavone are 66.90% and 4.67%, respectively, and have the ability of pH-responsive release in vitro. Through the mathematical model of kinetics, we found that the release of soy isoflavone from gel beads showed Fickian diffusion in release media (pH 2.0 and 7.4), but showed non-Fickian diffusion at pH 4.0 and 6.8. This polymer can be extended to prepare more versatile delivery and controlled release system, appealing for food, pharmaceutical, biomedicine and cosmetics applications.

Polymyxin Delivery Systems: Recent Advances and Challenges

Polymyxins are vital antibiotics for the treatment of multiresistant Gram-negative ESKAPE pathogen infections. However, their clinical value is limited by their high nephrotoxicity and neurotoxicity, as well as their poor permeability and absorption in the gastrointestinal tract. This review focuses on various polymyxin delivery systems that improve polymyxin bioavailability and reduce drug toxicity through targeted and controlled release. Currently, the most suitable systems for improving oral, inhalation, and parenteral polymyxin delivery are polymer particles, liposomes, and conjugates, while gels, polymer fibers, and membranes are attractive materials for topical administration of polymyxin for the treatment of infected wounds and burns. In general, the application of these systems protects polymyxin molecules from the negative effects of both physiological and pathological factors while achieving higher concentrations at the target site and reducing dosage and toxicity. Improving the properties of polymyxin will be of great interest to researchers who are focused on developing antimicrobial drugs that show increased efficacy and safety.

Nanomaterials for Skin Delivery of Cosmeceuticals and Pharmaceuticals

Skin aging is described as dermatologic changes either naturally occurring over the course of years or as the result of the exposure to environmental factors (e.g., chemical products, pollution, infrared and ultraviolet radiations). The production of collagen and elastin, the main structural proteins responsible for skin strength and elasticity, is reduced during aging, while their role in skin rejuvenation can trigger a wrinkle reversing effect. Elasticity loss, wrinkles, dry skin, and thinning are some of the signs that can be associated with skin aging. To overcome skin aging, many strategies using natural and synthetic ingredients are being developed aiming to reduce the signs of aging and/or to treat age-related skin problems (e.g., spots, hyper- or hypopigmentation). Among the different approaches in tissue regeneration, the use of nanomaterials loaded with cosmeceuticals (e.g., phytochemicals, vitamins, hyaluronic acid, and growth factors) has become an interesting alternative. Based on their bioactivities and using different nanoformulations as efficient delivery systems, several cosmeceutical and pharmaceutical products are now available on the market aiming to mitigate the signs of aged skin. This manuscript discusses the state of the art of nanomaterials commonly used for topical administration of active ingredients formulated in nanopharmaceuticals and nanocosmeceuticals for skin anti-aging.

A brief overview on nano-sized materials used in the topical treatment of skin and soft tissue bacterial infections

Introduction: Skin and soft tissue infections are a significant clinical problem that can happen anywhere on the body. Bacteria are the most common cause of skin and soft tissue infections in humans. Despite the fact that there is a lot of antimicrobial agents and antibiotics for elucidating bacterial infections, the prevention and control of infectious diseases continue to be one of the greatest challenges for public health worldwide. At the present time, an alarming increase in multidrug resistance instantly requests to find suitable alternatives to current antibiotics. Therefore, drug resistance has been attempted to be resolved by the development of new classes of antimicrobial agents or targeted delivery systems for antibacterial drugs using nanotechnology.Area covered: The present review summarizes the emerging topical efforts to support the use of nano-sized materials as a new opportunity to combat today's skin infectious diseases.Expert opinion: Nano-sized materials can overcome the stratum corneum barrier and deliver drugs specifically to bacterial skin infections with trivial side effects. Depending on the physicochemical characteristics of nano-scaled materials, they can specifically be selected to target bacterial pathogens and also to get into the skin layers. These systems can overcome the antibiotic-resistance mechanisms and help us to the design of novel topical formulations that will make administration of antibacterial compounds safer, easier and more convenient.

Non-Propellant Foams of Green Nano-Silver and Sulfadiazine: Development and In Vivo Evaluation for Burn Wounds

PURPOSE

A non-propellant based foam (NPF) system was developed incorporating the antibiotics, pectin capped green nano-silver and sulfadiazine (SD) for the topical treatment of burn wounds as a convenient alternative to the existing therapies.

METHODS

NPF were prepared using various surfactants and oils forming a nanoemulsion. Anti-microbial studies by resazurin microtitre assay, ex vivo diffusion, in vivo skin permeation and deposition studies, and acute irritation studies were carried out. NPF was applied onto secondary thermal wounds manifested on mice models followed by macroscopic and histological examinations.

RESULTS

NPF had an average globule size of <75 nm. The viscosity was ~10 cP indicating the feasibility of expulsion from the container upon actuation. With no skin irritation, the foams showed a higher skin deposition of SD. A high contraction and an evident regeneration of the skin tissue upon treatment with NPF indicated a good recovery from the thermal injury was apparent from the histology studies.

CONCLUSION

NPF represents an alternative topical formulation that can be employed as a safe and effective treatment modality for superficial second degree (partial thickness) burn wounds. With a minimal requirement of mechanical force, the no-touch application of NPF makes it suitable for sensitive and irritant skin surfaces.