Green encapsulation of LDH(Zn/Al)-5-Fu with carboxymethyl cellulose biopolymer; new nanovehicle for oral colorectal cancer treatment

Preparation and sustained release of diatomite incorporated and Eudragit L100 coated hydroxypropyl cellulose/chitosan aerogel microspheres

The drug encapsulation efficiency, release rate and time, sustained release, and stimulus-response of carriers are very important for drug delivery. However, these always cannot obtained for the carrier with a single component. To improve the comprehensive performance of chitosan-based carriers for 5-Fu delivery, diatomite-incorporated hydroxypropyl cellulose/chitosan (DE/HPC/CS) composite aerogel microspheres were fabricated for the release of 5-fluorouracil (5-Fu), and the release performance was regulated with the content of diatomite, pH value, and external coating material. Firstly, the 5-Fu loaded DE/HPC/CS composite aerogel microspheres and Eudragit L100 coated microspheres were prepared with cross-linking followed by freeze-drying, and characterized by SEM, EDS, FTIR, XRD, DSC, TG, and swelling. The obtained aerogel microspheres have a diameter of about 0.5 mm, the weight percentage of F and Si elements on the surface are 0.55 % and 0.78 % respectively. The glass transition temperature increased from 179 °C to 181 °C and 185 °C with the incorporation of DE and coating of Eudragit, and the equilibrium swelling percentage of DE/HPC/CS (1.5:3:2) carriers are 101.52 %, 45.27 %, 67.32 % at pH 1.2, 5.0, 7.4, respectively. Then, the effect of DE content on the drug loading efficiency of DE/HPC/CS@5-Fu was investigated, with the increase of DE content, the highest encapsulation efficiency was 82.6 %. Finally, the release behavior of DE incorporated and Eudragit L100 Coated microspheres were investigated under different pH values, and evaluated with four kinetic models. The results revealed that the release rate of 5-Fu decreased with the increase of DE content, sustained release with extending time and pH-responsive were observed for the Eudragit-coated aerogel microspheres.

Effect of Ultrasonic Treatment on the Physicochemical Properties of Bovine Plasma Protein-Carboxymethyl Cellulose Composite Gel

In order to improve the stability of bovine plasma protein-carboxymethyl cellulose composite gels and to expand the utilization of animal by-product resources, this study investigated the impact of different ultrasound powers (300, 400, 500, 600, and 700 W) and ultrasound times (0, 10, 20, 30, and 40 min) on the functional properties, secondary structure and intermolecular forces of bovine plasma protein-carboxymethyl cellulose composite gel. The results showed that moderate ultrasonication resulted in the enhancement of gel strength, water holding capacity and thermal stability of the composite gels, the disruption of hydrogen bonding and hydrophobic interactions between gel molecules, the alteration and unfolding of the internal structure of the gels, and the stabilization of the dispersion state by electrostatic repulsive forces between the protein particles. The content of α-helices, β-turns, and β-sheets increased and the content of random curls decreased after sonication (p < 0.05). In summary, appropriate ultrasound power and time can significantly improve the functional and structural properties of composite gels. It was found that controlling the thermal aggregation behavior of composite gels by adjusting the ultrasonic power and time is an effective strategy to enable the optimization of composite gel texture and water retention properties.

Tumor microenvironment-activated, immunomodulatory nanosheets loaded with copper(II) and 5-FU for synergistic chemodynamic therapy and chemotherapy

The tumor microenvironment (TME) has a redox state that differs greatly from normal tissues, as characterized by the overexpression of H2O2 and glutathione (GSH). To address the GSH-related restrictions on chemodynamic therapy (CDT) efficacy, we have developed a Cu(II)-based CDT strategy. In this study, a novel organic-inorganic hybrid drug delivery system (LDH/HA/5-FU) was conceived and prepared by the intercalation of 5-FU into the interlayer of copper-aluminum layered double hydroxide (CuAl-LDH) via ion exchange strategy and the adsorption of hyaluronic acid (HA) on the surface of CuAl-LDH. Taking advantage of the pH-degradable property of CuAl-LDH and the CD44-targeting property of HA, the formed LDH/HA/5-FU nanosheets could specifically target tumor cells' overexpressing CD44 receptor, rapidly release Cu(II) and 5-FU in tumor cells, inducing tumor cell apoptosis and cuproptosis, and long-term intracellular GSH depletion and toxic hydroxyl radicals (·OH) generation could be achieved through the cyclic catalytic reaction of Cu(I)/Cu(II). Meanwhile, peritumoral injection of LDH/HA/5-FU nanosheets might function as an adjuvant to increase the levels of antitumor tumor-associated macrophages (TAMs) and T cells. In vivo experiments further verified that the intelligently designed LDH/HA/5-FU nanosheets successfully promoted the immune systems, with an excellent inhibition efficacy towards tumors by combining Cu-based CDT and chemotherapy, showing promising potential for solid tumor treatments.

Recent developments in natural biopolymer based drug delivery systems

Targeted delivery of drug molecules to diseased sites is a great challenge in pharmaceutical and biomedical sciences. Fabrication of drug delivery systems (DDS) to target and/or diagnose sick cells is an effective means to achieve good therapeutic results along with a minimal toxicological impact on healthy cells. Biopolymers are becoming an important class of materials owing to their biodegradability, good compatibility, non-toxicity, non-immunogenicity, and long blood circulation time and high drug loading ratio for both macros as well as micro-sized drug molecules. This review summarizes the recent trends in biopolymer-based DDS, forecasting their broad future clinical applications. Cellulose chitosan, starch, silk fibroins, collagen, albumin, gelatin, alginate, agar, proteins and peptides have shown potential applications in DDS. A range of synthetic techniques have been reported to design the DDS and are discussed in the current study which is being successfully employed in ocular, dental, transdermal and intranasal delivery systems. Different formulations of DDS are also overviewed in this review article along with synthesis techniques employed for designing the DDS. The possibility of these biopolymer applications points to a new route for creating unique DDS with enhanced therapeutic qualities for scaling up creative formulations up to the clinical level.

Recent advances in cellulose, pectin, carrageenan and alginate-based oral drug delivery systems

Polymers-based drug delivery systems constitute one of the highly explored thrust areas in the field of the medicinal and pharmaceutical industries. In the past years, the properties of polymers have been modified in context to their solubility, release kinetics, targeted action site, absorption, and therapeutic efficacy. Despite the availability of diverse synthetic polymers for the bioavailability enhancement of drugs, the use of natural polymers is still highly recommended due to their easy availability, accessibility, and non-toxicity. The aim of the review is to provide the available literature of the last five years on oral drug delivery systems based on four natural polymers i.e., cellulose, pectin, carrageenan, and alginate in a concise and tabulated manner. In this review, most of the information is in tabulated form to provide easy accessibility to the reader. The data related to active pharmaceutical ingredients and supported components in different formulations of the mentioned polymers have been made available.

Zn-Al layered double hydroxides induce embryo malformations and impair locomotion behavior in Danio rerio

Layered double hydroxides (LDHs) are stimuli-responsive anionic nanoclays. The vast possibilities of using LDHs can lead to their existence in the ecosystem, raising a question of potential ecological concern. However, little is known about the effect of these nanomaterials on freshwater organisms. The present study aimed to assess the ecotoxicological effects of Zinc-Aluminium LDH-nitrate (ZnAl LDH-NO₃) in zebrafish (Danio rerio) early life stages. The endpoints measured were mortality, malformations and hatching rate after exposure of D. rerio embryos and larvae to ZnAl LDH-NO₃ following the OECD 236 guideline. The behavioral, biochemical (markers of oxidative stress and neurotoxicity), and molecular (at DNA level) alterations were also assessed using sub-lethal concentrations. No observable acute effects were detected up to 415.2 mg LDH/L while the 96 h-LC₅₀ was estimated as 559.9 mg/L. Tested LDH caused malformations in D. rerio embryos, such as pericardial edema, incomplete yolk sac absorption and tail deformities (96 h-EC₅₀ = 172.4 mg/L). During the dark periods, the locomotor behavior in zebrafish larvae was affected upon ZnAl LDH-NO₃ exposure. However, no significant biochemical and molecular changes were recorded. The present findings suggest that ZnAl LDH-NO₃ can be regarded as a non-toxic nanomaterial towards D. rerio (E/LC₅₀ > > 100 mg/L) although impairment of the locomotion behavior on zebrafish embryos can be expected at concentrations below 100 mg/L.

Recent trends in MXene-based material for biomedical applications

MXene is a magical class of 2D nanomaterials and emerging in many applications in diverse fields. Due to the multiple advantageous characteristics of its fundamental components, such as structural, physicochemical, optical, and occasionally even biological characteristics. However, it is limited in the biomedical industry due to poor physiological stability, decomposition rate, and lack of controlled and sustained drug release. These limitations can be overcome when MXene forms composites with other 2D materials. The efficiency of pure MXene in biomedicine is inferior to that of MXene-based composites. The availability of functionality on the exterior part of MXene has a key role in the modification of their surface and their characteristics. This review provides an extensive discussion on the synthesizing of MXene and the role of the surface functionalities on the efficiency of MXene. In addition, a detailed discussion of the biomedical applications of MXene, including antibacterial activity, regenerative medicine, CT scan capability, drug delivery, diagnostics, MRI and biosensing capability. Furthermore, an outline of the future problems and challenges of MXene-based materials for biomedical applications was narrated. Thus, these salient features showcase the potential of MXene-based material and will be a breakthrough in biomedical applications in the near future.

Nanoemulsion carriers of porous γ-alumina modified by polyvinylpyrrolidone and carboxymethyl cellulose for pH-sensitive delivery of 5-fluorouracil

5-Fluorouracil (5-FU) is a cytotoxic drug with a low half-life. These features can cause some problems such as burst drug release and numerous side effects. In the present study, a pH-sensitive nanocomposite of polyvinylpyrrolidone (PVP)/carboxymethyl cellulose (CMC)/γ-alumina developed by using water in oil in water (W/O/W) double emulsion method. The fabricated emulsion has been employed as the 5-FU carrier to investigate its effects on drug half-life, side effects, drug loading efficiency (DLE), and drug entrapment efficiency (DEE). Analyzing the FTIR and XRD indicated the successful loading of 5-FU into the nanocarrier and affirmed the synthesized nanocomposite's chemical bonding and crystalline features. Furthermore, by using DLS and Zeta potential assessment, size and undersize distribution, as well as the stability of the drug-loaded nanocomposite were determined, which demonstrated the monodisperse and stable nanoparticles. Moreover, the nanocomposites with spherical shapes and homogeneous surfaces were shown in FE-SEM, which indicated good compatibility for the constituents of the nanocomposites. Moreover, by employing BET analysis the porosity has been investigated. Drug release pattern was studied, which indicated a controlled drug release behavior with above 96 h drug retention. Besides, the loading and entrapment efficiencies were obtained 44 % and 86 %, respectively. Furthermore, the curve fitting technique has been employed and the predominant release mechanism has been determined to evaluate the best-fitted kinetic models. MTT assay and flow cytometry assessment has been carried out to investigate the cytotoxic effects of the fabricated drug-loaded nanocomposite on MCF-7 and normal cells. The results showed enhanced cytotoxicity and late apoptosis for the PVP/CMC/γ-alumina/5-FU. Based on the MTT assay outcomes on normal cell lines (L929), which indicated above 90 % cell viability, the biocompatibility and biosafety of the synthesized nanocarrier have been confirmed. Moreover, due to the porosity of the PVP/CMC/γ-alumina, this nanocarrier can exploit from high specific surface area and be more sensitive to environmental conditions such as pH. These outcomes propose that the novel pH-sensitive PVP/CMC/γ-alumina nanocomposite can be a potential candidate for drug delivery applications, especially for cancer therapy.

Novel carboxymethyl cellulose-halloysite-polyethylene glycol nanocomposite for improved 5-FU delivery

Drug nano-carriers are crucial for achieving targeted treatment against cancer disorders with minimal side effects. In this study, a pH-responsive nanocomposite based on halloysite nanotube (HNT) coated with carboxymethyl cellulose (CMC)/polyethylene glycol (PEG) hydrogel for controlled delivery of 5-Fluorouracil (5-FU), a hydrophobic chemotherapy drug prescribed for different types of cancers was synthesized for the first time using the water-in-oil-in-water (W/O/W) technique. The developed CMC/PEG/HNT/5-FU nanocomposite was characterized by dynamic light scattering (DLS), zeta potential, Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and Field emission scanning electron microscope (FE-SEM) to get information about the particle size, surface charge, interactions between functional groups, crystalline structure and morphology, respectively. High efficiencies in terms of drug entrapment and loading (46 % and 87 %, respectively) were attained. In-vitro drug release results revealed an improved and sustained 5-FU delivery in an acid environment compared to the physiological medium, corroborating the pH-sensitivity of the developed nano-carrier. Flow cytometry and MTT assays demonstrated that the 5-FU loaded nanocomposite had considerable cytotoxicity on MCF-7 breast cancer cells while it is not toxic against L929 fibroblast cells. The nanocomposite synthesized herein could serve as a platform for the pH-sensitive release of anti-cancer drugs.

State-of-the-art advancement of surface functionalized layered double hydroxides for cell-specific targeting of therapeutics

Over the years, layered double hydroxides (LDHs) hold a specific position in biomedicine due to their tunable chemical composition and appropriate structural properties. However, LDHs lack adequate sensitivity for active targeting because of less active surface area and low mechanical strength in physiological conditions. The exploitation of eco-friendly materials, such as chitosan (CS), for surface engineering of LDHs, whose payloads are transferred only under certain conditions, can help develop stimuli-responsive materials owing to high biosafety and unique mechanical strength. We aim to render a well-oriented scenario toward the latest achievements of a bottom-up technology relying on the surface functionalization of LDHs to fabricate functional formulations with promoted bio-functionality and high encapsulation efficiency for various bioactives. Many efforts have been devoted to critical aspects of LDHs, including systemic biosafety and the suitability for developing multicomponent systems via integration with therapeutic modalities, which are thoroughly discussed herein. In addition, a comprehensive discussion was provided for the recent progress in the emergence of CS-coated LDHs. Finally, the challenges and future perspectives in the fabrication of efficient CS-LDHs in biomedicine are considered, with a special focus on cancer treatment.

Biomaterials Based on Organic Polymers and Layered Double Hydroxides Nanocomposites: Drug Delivery and Tissue Engineering

The development of biomaterials has a substantial role in pharmaceutical and medical strategies for the enhancement of life quality. This review work focused on versatile biomaterials based on nanocomposites comprising organic polymers and a class of layered inorganic nanoparticles, aiming for drug delivery (oral, transdermal, and ocular delivery) and tissue engineering (skin and bone therapies). Layered double hydroxides (LDHs) are 2D nanomaterials that can intercalate anionic bioactive species between the layers. The layers can hold metal cations that confer intrinsic biological activity to LDHs as well as biocompatibility. The intercalation of bioactive species between the layers allows the formation of drug delivery systems with elevated loading capacity and modified release profiles promoted by ion exchange and/or solubilization. The capacity of tissue integration, antigenicity, and stimulation of collagen formation, among other beneficial characteristics of LDH, have been observed by in vivo assays. The association between the properties of biocompatible polymers and LDH-drug nanohybrids produces multifunctional nanocomposites compatible with living matter. Such nanocomposites are stimuli-responsive, show appropriate mechanical properties, and can be prepared by creative methods that allow a fine-tuning of drug release. They are processed in the end form of films, beads, gels, monoliths etc., to reach orientated therapeutic applications. Several studies attest to the higher performance of polymer/LDH-drug nanocomposite compared to the LDH-drug hybrid or the free drug.

Knowledge mapping concerning applications of nanocomposite hydrogels for drug delivery: A bibliometric and visualized study (2003-2022)

Background: Nanocomposite Hydrogels (NHs) are 3D molecular networks formed by physically or covalently crosslinking polymer with nanoparticles or nanostructures, which are particularly suitable for serving as carriers for drug delivery systems. Many articles pertaining to the applications of Nanocomposite Hydrogels for drug delivery have been published, however, the use of bibliometric and visualized analysis in this area remains unstudied. The purpose of this bibliometric study intended to comprehensively analyze the knowledge domain, research hotspots and frontiers associated with the applications of Nanocomposite Hydrogels for drug delivery. Methods: We identified and retrieved the publications concerning the applications of NHs for drug delivery between 2003 and 2022 from Web of Science Core Collection Bibliometric and visualized analysis was utilized in this investigative study. Results: 631 articles meeting the inclusion criteria were identified and retrieved from WoSCC. Among those, 2,233 authors worldwide contributed in the studies, accompanied by an average annual article increase of 24.67%. The articles were co-authored by 764 institutions from 52 countries/regions, and China published the most, followed by Iran and the United States. Five institutions published more than 40 papers, namely Univ Tabriz (n = 79), Tabriz Univ Med Sci (n = 70), Islamic Azad Univ (n = 49), Payame Noor Univ (n = 42) and Texas A&M Univ (n = 41). The articles were published in 198 journals, among which the International Journal of Biological Macromolecules (n = 53) published the most articles, followed by Carbohydrate Polymers (n = 24) and ACS Applied Materials and Interfaces (n = 22). The top three journals most locally cited were Carbohydrate Polymers, Biomaterials and Advanced materials. The most productive author was Namazi H (29 articles), followed by Bardajee G (15 articles) and Zhang J (11 articles) and the researchers who worked closely with other ones usually published more papers. "Doxorubicin," "antibacterial" and "responsive hydrogels" represent the current research hotspots in this field and "cancer therapy" was a rising research topic in recent years. "(cancer) therapeutics" and "bioadhesive" represent the current research frontiers. Conclusion: This bibliometric and visualized analysis offered an investigative study and comprehensive understanding of publications regarding the applications of Nanocomposite Hydrogels for drug delivery from 2003 to 2022. The outcome of this study would provide insights for researchers in the field of Nanocomposite Hydrogels applications for drug delivery.

Surface modification of two-dimensional layered double hydroxide nanoparticles with biopolymers for biomedical applications

Layered double hydroxides (LDHs) are appealing nanomaterials for (bio)medical applications and their potential is threefold. One can gain advantage of the structure of LDH frame (i.e., layered morphology), anion exchanging property towards drugs with acidic character and tendency for facile surface modification with biopolymers. This review focuses on the third aspect, as it is necessary to evaluate the advantages of polymer adsorption on LDH surfaces. Beside the short discussion on fundamental and structural features of LDHs, LDH-biopolymer interactions will be classified in terms of the effect on the colloidal stability of the dispersions. Thereafter, an overview on the biocompatibility and biomedical applications of LDH-biopolymer composite materials will be given. Finally, the advances made in the field will be summarized and future research directions will be suggested.

Mucoadhesive carriers for oral drug delivery

Among the various dosage forms, oral medicine has extensive benefits including ease of administration and patients' compliance, over injectable, suppositories, ocular and nasal. Despite of extensive demand and emerging advantages, over 50% of therapeutic molecules are not available in oral form due to their physicochemical properties. More importantly, most of the biologics, proteins, peptide, and large molecular drugs are mostly available in injectable form. Conventional oral drug delivery system has limitation such as degradation and lack of stability within stomach due to presence of highly acidic gastric fluid, hinders their therapeutic efficacy and demand more frequent and higher dosing. Hence, formulation for controlled, sustained, and targeted drug delivery, need to be designed with feasibility to target the specific region of gastrointestinal (GI) tract such as stomach, small intestine, intestine lymphatic, and colon is challenging. Among various oral delivery approaches, mucoadhesive vehicles are promising and has potential for improving oral drug retention and controlled absorption to treat local diseases within the GI tract, as well systemic diseases. This review provides the overview about the challenges and opportunities to design mucoadhesive formulation for oral delivery of therapeutics in a way to target the specific region of the GI tract. Finally, we have concluded with future perspective and potential of mucoadhesive formulations for oral local and systemic delivery.

Covalent Organic Framework (C6N6) as a Drug Delivery Platform for Fluorouracil to Treat Cancerous Cells: A DFT Study

Continuous studies are being carried out to explore new methods and carrier surfaces for target drug delivery. Herein, we report the covalent triazine framework C₆N₆ as a drug delivery carrier for fluorouracil (FU) and nitrosourea (NU) anti-cancer drugs. FU and NU are physiosorbed on C₆N₆ with adsorption energies of -28.14 kcal/mol and -27.54 kcal/mol, respectively. The outcomes of the non-covalent index (NCI) and quantum theory of atoms in molecules (QTAIM) analyses reveal that the FU@C₆N₆ and NU@C₆N₆ complexes were stabilized through van der Waals interactions. Natural bond order (NBO) and electron density difference (EDD) analyses show an appreciable charge transfer from the drug and carrier. The FU@C₆N₆ complex had a higher charge transfer (-0.16 e^-) compared to the NU@C₆N₆ complex (-0.02 e^-). Frontier molecular orbital (FMO) analysis reveals that the adsorption of FU on C₆N₆ caused a more pronounced decrease in the HOMO-LUMO gap (E_H-L) compared to that of NU. The results of the FMO analysis are consistent with the NBO and EDD analyses. The drug release mechanism was studied through dipole moments and pH effects. The highest decrease in adsorption energy was observed for the FU@C₆N₆ complex in an acidic medium, which indicates that FU can easily be off-loaded from the carrier (C₆N₆) to a target site because the cancerous cells have a low pH compared to a normal cell. Thus, it may be concluded that C₆N₆ possesses the therapeutic potential to act as a nanocarrier for FU to treat cancer. Furthermore, the current study will also provide motivation to the scientific community to explore new surfaces for drug delivery applications.

Two cationic iron-based crystalline porous materials for encapsulation and sustained release of 5-fluorouracil

Iron-based crystalline porous materials (CPMs) emerged as a new class of biodegradable and non-toxic materials of high interest for drug delivery systems (DDSs) due to their high loading capacity and controllable structures. This work constructed two kinds of Fe-CPM coordination polymers (CPM-83 and CPM-85) from typical oxo-centered trimers of the iron octahedra cluster [Fe₃O(RCOO)₃(TPT)] with two functional modules. The tri-topic pyridine ligand (TPT) occupied the open metal sites of the trinuclear cluster, precluding the attachment of neutralizing anions, leading to three-dimensional frameworks with a positive charge and higher stability. Moreover, the triazine ligand TPT divides the original columnar channel into small domains, improving the adsorption efficiency and maximizing the host-guest interaction. Hence, the suitable pore size and electrostatic force make the materials highly adsorption selective for the anticancer drug 5-fluorouracil (5-Fu). We show that Fe-CPM-83 and Fe-CPM-85 loaded with 5-Fu are efficient drug delivery vehicles with loading content as high as 60.5 (wt%) and 32.8 (wt%) within 2-5 h of loading time. Simultaneously, their sustained release kinetics can be up to 96 hours with a completely different pH-responsive controlled release. The released content is 77% or 85% for each complex, significantly prolonging the release process and decreasing the plasma concentration. The MTT assay was performed on mouse fibroblasts (L929) to demonstrate the satisfactory biocompatibility of the matrix. This work has momentous research significance and application value for developing novel drug-delivery materials.

D-mannose functionalized MgAl-LDH/Fe-MOF nanocomposite as a new intelligent nanoplatform for MTX and DOX co-drug delivery

Commonly the directly administered chemotherapy drugs lack targeting in tumor treatment. Thus, trying to improve cancer treatment efficiency led us to design a new intelligent system for cancer treatment. Considering these, in the current work, at first, the 2-aminoterephthalic acid (NH₂-BDC) intercalated layered double hydroxides (MgAl-(NH₂-BDC) LDH) were synthesized simply. Afterward, the in situ growth of the iron-based metal-organic frameworks in the presence of MgAl-(NH₂-BDC) LDH occurred (MgAl-LDH/Fe-MOF). In the end, the reaction of MgAl-LDH/Fe-MOF with D-mannose (D-Man) achieved the MgAl-LDH/Fe-MOF/D-Man ternary hybrid nanostructure. Scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) analysis confirmed the formation of the monodisperse Fe-MOF with nanosize in the presence of MgAl-LDH. Importantly, methotrexate (MTX) and doxorubicin (DOX) entrapment efficiency reached respectively about 28 wt% and 21% for MgAl-LDH/Fe-MOF/D-Man. The in vitro drug release experiments revealed a higher drug release at pH 5.0 in comparison with pH 7.4 which revealed its promising potential for anticancer drug delivery applications. Bioassay results revealed that the co-drug-loaded MgAl-LDH/Fe-MOF/D-Man has higher cytotoxicity on MDA-MB 231 cells. At last, fluorescence microscopy and flow cytometric analysis confirmed the successful uptake of MgAl-LDH/Fe-MOF/D-Man into MDA-MB 231 cell lines, as well as its bioimaging potential. A survey in the published literature approved that this work is the first report on the evaluation of the MgAl-LDH/Fe-MOF/D-Man for targeted co-delivery of both MTX and DOX. Finally, results collectively demonstrate the importance of the biocompatible MgAl-LDH/Fe-MOF/D-Man as a hopeful candidate for biomedicinal applications from the targeted co-drug delivery and bioimaging potential viewpoints.

Highly Water-Absorptive and Antibacterial Hydrogel Dressings for Rapid Postoperative Detumescence

Postoperative wound edema, infection, and pain burden the patient’s life. Therefore, the purpose of this study is to develop an effective antibacterial, multifunctional application to prevent postoperative edema and relieve postoperative pain by making full use of the dehydrating and analgesic effects of magnesium sulfate (MgSO₄), magnesium oxide (MgO), sodium alginate (SA), and sodium carboxymethyl cellulose (Na-CMC) to make a composite hydrogel, which can promote postoperative detumescence. MgSO_4//MgO/SA/Na-CMC composite hydrogel dressings have outstanding mechanical properties, high water absorption, and good biocompatibility. MgO endows the hydrogel dressing with excellent antibacterial properties and better antibacterial activity against common bacteria and multidrug-resistant bacteria. In addition, MgSO₄/MgO/SA/Na-CMC hydrogel dressing shows superior dehydration and analgesic properties in the postoperative nude mice model. This study shows that the multifunctional MgSO₄/MgO/SA/Na-CMC composite hydrogel dressing developed as a surgical incision dressing has broad prospects in the prevention of incision infection, postoperative edema, and analgesia.

Progress in the Degradability of Biodegradable Film Materials for Packaging

In today’s world, the problem of “white pollution” is becoming more and more serious, and many countries have paid special attention to this problem, and it has become one of the most important tasks to reduce polymer waste and to protect the environment. Due to the degradability, safety, economy and practicality of biodegradable packaging film materials, biodegradable packaging film materials have become a major trend in the packaging industry to replace traditional packaging film materials, provided that the packaging performance requirements are met. This paper reviews the degradation mechanisms and performance characteristics of biodegradable packaging film materials, such as photodegradation, hydrodegradation, thermo-oxidative degradation and biodegradation, focuses on the research progress of the modification of biodegradable packaging film materials, and summarizes some challenges and bottlenecks of current biodegradable packaging film materials.

Oxidative Dehydrogenation of Ethane with CO2 over Mo/LDO Catalyst: The Active Species of Mo Controlled by LDO

A series of the layered double oxides supported molybdenum oxide catalysts were synthesized and evaluated in the oxidative dehydrogenation of ethane with CO2 (CO2-ODHE). The 22.3 wt% Mo/LDO catalyst delivered a 92.3%selectivity to ethylene and a 7.9% ethane conversion at relatively low temperatures. The molybdenum oxide catalysts were fully characterized by XRD, BET, SEM, TEM, UV–vis, Raman TG, and XPS. Isolated [MoO4]2− dominated on the surface of the fresh 12.5 wt% Mo/LDO catalyst. With the increase of the Mo content, the Mo species transformed from [MoO4]2− to [Mo7O24]6− and [Mo8O26]4− on the 22.3 wt% and 30.1 wt% Mo/LDO catalysts, respectively. The redox mechanism was proposed and three Mo species including [MoO4]2−, [Mo7O24]6−, and [Mo8O26]4− showed quite different functions in the CO2-ODHE reaction: [MoO4]2−, with tetrahedral structure, preferred the non-selective pathway; [Mo7O24]6−, with an octahedral construction, promoted the selective pathway; and the existence of [Mo8O26]4− reduced the ability to activate ethane. This work provides detailed insights to further understand the relationship between structure–activity and the role of surface Mo species as well as their aggregation state in CO2-ODHE.

Carboxymethyl starch encapsulated 5-FU and DOX co-loaded layered double hydroxide for evaluation of its in vitro performance as a drug delivery agent

Achieving a new oral drug delivery system with controlled drug release behavior is valuable in cancer therapy. Therefore, for the first time, doxorubicin (DOX) and 5-fluorouracil (5-Fu) were simultaneously co-loaded on the as-synthesized layered double hydroxides LDH(MgAl). The resulted system was encapsulated with carboxymethyl starch to improve its efficiency for colon cancer therapy. Several characterization techniques were used to evaluate the successful synthesis of the CMS@LDH(MgAl)@DOX,5-Fu microspheres. The scanning electron microscopy result showed that the size of prepared microspheres is about 72 μm. Additionally, the presence of one broad peak at 2θ ~ 20 of the X-ray diffraction spectrum approved its amorph nature. The drug release study showed a controlled release profile with ~22% of DOX and 29% of 5-Fu. In addition, the cell viability test outcome confirmed the sustained drug release pattern from CMS@LDH(MgAl)@DOX,5-Fu against the colon cancer cell line. The results suggest that the prepared microspheres are capable to operate as an acceptable formulation for oral co-drug delivery.

Advancements in Biodegradable Active Films for Food Packaging: Effects of Nano/Microcapsule Incorporation

Food packaging plays a fundamental role in the modern food industry as a main process to preserve the quality of food products from manufacture to consumption. New food packaging technologies are being developed that are formulated with natural compounds by substituting synthetic/chemical antimicrobial and antioxidant agents to fulfill consumers’ expectations for healthy food. The strategy of incorporating natural antimicrobial compounds into food packaging structures is a recent and promising technology to reach this goal. Concepts such as “biodegradable packaging”, “active packaging”, and “bioactive packaging” currently guide the research and development of food packaging. However, the use of natural compounds faces some challenges, including weak stability and sensitivity to processing and storage conditions. The nano/microencapsulation of these bioactive compounds enhances their stability and controls their release. In addition, biodegradable packaging materials are gaining great attention in the face of ever-growing environmental concerns about plastic pollution. They are a sustainable, environmentally friendly, and cost-effective alternative to conventional plastic packaging materials. Ultimately, a combined formulation of nano/microencapsulated antimicrobial and antioxidant natural molecules, incorporated into a biodegradable food packaging system, offers many benefits by preventing food spoilage, extending the shelf life of food, reducing plastic and food waste, and preserving the freshness and quality of food. The main objective of this review is to illustrate the latest advances in the principal biodegradable materials used in the development of active antimicrobial and antioxidant packaging systems, as well as the most common nano/microencapsulated active natural agents incorporated into these food-packaging materials.

Folic acid-modified photoluminescent dialdehyde carboxymethyl cellulose crosslinked bionanogels for pH-controlled and tumor-targeted co-drug delivery

This work aimed to fabricate a new photoluminescent bionanogel with both targeted anticancer drug delivery and bioimaging potentials. Briefly, at first photoluminescent carbon dots (CDs) were synthesized from the low-cost and more available black pepper with traditional medicinal properties. The as-synthesized dialdehyde carboxymethyl cellulose (DCMC) was used as a safe crosslinker for gelatin crosslinking in the presence of CDs (CDs/DCMC-Gel). Eventually, the residual amine functional groups of gelatin were used for the conjugation of CDs/DCMC-Gel with folic acid (FA) ((CDs/DCMC-Gel)-FA bionanogels). All employed physicochemical characterization methods approved the (CDs/DCMC-Gel)-FA bionanogels fabrication route. SEM analysis specified the spherical morphology with a diameter of ~70-90 nm for it. Curcumin (CUR) and doxorubicin (DOX) respectively were loaded with drug entrapment efficiency of about 44.0% and 41.4%. The release rate for both drugs in acidic conditions was higher than in physiological conditions. In vitro antitumor experiments; MTT, DAPI staining, cellular uptake, and cell cycle tests showed the superior anticancer effect of the CUR@DOX@(CDs/DCMC-Gel)-FA in comparison with free CUR@DOX. Moreover, the (CDs/DCMC-Gel)-FA acted as a hopeful bio-imaging tool. Taken together, the designed (CDs/DCMC-Gel)-FA could be proposed as a promising nanosystem for efficient chemotherapy.

Recent Trends in Assessment of Cellulose Derivatives in Designing Novel and Nanoparticulate-Based Drug Delivery Systems for Improvement of Oral Health

Natural polymers are revolutionizing current pharmaceutical dosage forms design as excipient and gained huge importance because of significant influence in formulation development and drug delivery. Oral health refers to the health of the teeth, gums, and the entire oral-facial system that allows us to smile, speak, and chew. Since years, biopolymers stand out due to their biocompatibility, biodegradability, low toxicity, and stability. Polysaccharides such as cellulose and their derivatives possess properties like novel mechanical robustness and hydrophilicity that can be easily fabricated into controlled-release dosage forms. Cellulose attracts the dosage design attention because of constant drug release rate from the precursor nanoparticles. This review discusses the origin, extraction, preparation of cellulose derivatives and their use in formulation development of nanoparticles having multidisciplinary applications as pharmaceutical excipient and in drug delivery, as bacterial and plant cellulose have great potential for application in the biomedical area, including dentistry, protein and peptide delivery, colorectal cancer treatment, and in 3D printable dosage forms.

Recent advancements in synthesis and drug delivery utilization of polysaccharides-based nanocomposites: The important role of nanoparticles and layered double hydroxides

Drug delivery systems are explained as methods to deliver a specific drug to desired organs, tissues, and cells for drug release to diseases treatment. Recently, considerable development has been interested in stimuli-responsive nano-systems, which respond to the essential pathological and physicochemical issues in diseased sites. During the last decades, researchers in the world presented, investigated, and implemented novel different nanomaterials with a focus on developing drug delivery. Polysaccharides including chitosan, alginate, hyaluronic acid, gums, and cellulose, as natural bio-materials, are suitable candidates for designing and formulations of these nano-systems because of the outstanding merits such as bio-compatibility, bio-degradability, non-toxicity, and gelling characteristics. On the other side, nanoparticles including metals (Au, Ag), metal oxides (Fe₃O₄, ZnO, CuO), or non-metal oxides (SiO₂) and also, layered double hydroxides nanostructures have appealed significant consideration in the fields of biomedical therapeutics and cancer therapy owing to the bio-compatibility, great surface area, good chemical and mechanical features, and also proper magnetic characteristics. This comprehensive review provides an overview of current advancements in drug delivery strategies, and manufacturing methods using chitosan, alginate, hyaluronic acid, gums, and also, metals, metal oxides, non-metal oxides, and LDHs for delivery system uses.

Design and fabrication of hybrid triple-responsive κ-carrageenan-based nanospheres for controlled drug delivery

In the last two decades, the utilization of magnetic nanospheres in intelligent polymeric structures have received increased attention of researchers in numerous biomedical applications. Here, hybrid nanostructured triple-responsive magnetic nanospheres (κ-Car-g-P(AA/DMA)@Fe₃O₄) containing inorganic iron oxide core (Fe₃O₄) and organic graft copolymeric shell based on κ-carrageenan (κ-Car) and poly(acrylic acid/dimethylaminoethyl methacrylate) (P(AA/DMA)) were synthesized by microwave induced co-precipitation technique. The structure, size, surface morphology, magnetic property and stability of synthesized κ-Car-g-P(AA/DMA)@Fe₃O₄ magnetic nanospheres were characterized using FTIR, UV, XRD, TEM, Zeta-sizer, and VSM. κ-Car-g-P(AA/DMA)@Fe₃O₄ nanospheres were loaded with 5-Fluorouracil (5-FU) as an antineoplastic drug, and their 5-FU release behavior was explored in diverse graft yields, pH values, temperatures and in the existence of an alternating magnetic field. The κ-Car-g-P(AA/DMA)@Fe₃O₄ nanospheres demonstrated pH-, thermo-, and magnetic field-responsive 5-FU release with good biocompatibility and excellent anticancer activity. In addition, 5-FU release under 50 mT magnetic field reached to 100% within 4 h. This work exhibits that hybrid nanospheres have a triple stimuli-responsive influence, which is of principal importance for the future design and application of multi-functional responsive platforms to develop externally stimulated release of active agents and their healthcare capability.

Decorated Mn-ferrite nanoparticle@Zn-Al layered double hydroxide@Cellulose@ activated biochar nanocomposite for efficient remediation of methylene blue and mercury (II)

An innovative magnetic nanocomposite was designed and fabricated by the functionalization and support of magnetic Mn-ferrite nanoparticle (MnFe₂O₄) with layered double hydroxide (Zn-Al LDHs) on cellulose and activated grapes stalks-derived biochar (AGB) (MnFe₂O₄@Zn-Al LDHs@Cel@AGB), to incorporate active functionalities and fantastic features with the aim to explore its feasibility for removal of harmful cationic species as methylene blue dye (MB) and mercury ions from wastewater. Structural, composition, morphological, surface area, adsorption performance of the fabricated nanocomposite toward both MB and Hg(II) and reusability were also investigated. The results referred that 10 mg ofthe nanocomposite exhibited 97.4% and 84.0 % removal efficiency of 10mgL^-1 MB dye and 0.1 mol L^-1 Hg(II) at 25 and 30 min contact times, respectively. Adsorption isotherms and kinetics of the two pollutants (MB and Hg(II)) were both governed by the pseudo-second-order equation with possible participation of intraparticle diffusion mechanism.

Role and Merits of Green Based Nanocarriers in Cancer Treatment

Simple Summary

The use of chemotherapy drugs against tumours is associated with various drawbacks such as poor solubility, low stability, high toxicity, lack of selectivity and rapid clearance. Nanocarriers can improve the safety and efficiency of drugs by increasing their solubility, enhance their circulation time and improve their uptake into cancer cells. Natural materials can be incorporated in the fabrication of nanocarriers as a substitute to synthetic ingredients. Several studies developed different types of green based nanocarriers using materials obtained from plant or microbial sources such as polysaccharides and polyphenols without the need of toxic chemicals in the synthesis. The green components can have many roles for example as mechanical support, trigger pH response for drug release, or act as a targeting ligand. The inclusion of these green components will support the cost effective and feasible large-scale production of nanocarriers with minimum negative impact on the environment.

Abstract

The use of nanocarriers for biomedical applications has been gaining interests from researchers worldwide for the delivery of therapeutics in a controlled manner. These “smart” vehicles enhance the dissolution and the bioavailability of drugs and enable their delivery to the target site. Taking the potential toxicity into consideration, the incorporation of natural “green” materials, derived from plants or microbial sources, in the nanocarriers fabrication, improve their safety and biocompatibility. These green components can be used as a mechanical platform or as targeting ligand for the payload or can play a role in the synthesis of nanoparticles. Several studies reported the use of green based nanocarriers for the treatment of diseases such as cancer. This review article provides a critical analysis of the different types of green nanocarriers and their synthesis mechanisms, characterization, and their role in improving drug delivery of anticancer drugs to achieve precision cancer treatment. Current evidence suggests that green-based nanocarriers can constitute an effective treatment against cancer.

Application or function of citric acid in drug delivery platforms

Nontoxic materials with natural origin are promising materials in the designing and preparation of the new drug delivery systems (DDSs). Today's, citric acid (CA) has attracted a great deal of attention because of its special features; green nature, biocompatibility, low price, biodegradability, and commercially available property. So, CA has been employed in the preparation of the various platforms to induce a suitable property on their structure. Recently, several research groups investigated the CA-based platforms in different forms like tablets, dendrimers, hyperbranched polymers, (co)polymer, hydrogels, and nanoparticles as efficient DDSs. By considering an increasing amount of published articles in this field, for the first time, in this review, an overview of the published works regarding CA applications in the design of various DDSs is presented with a detailed and insightful discussion.

Dual-drug delivery system based on the hydrogels of alginate and sodium carboxymethyl cellulose for colorectal cancer treatment

To improve the efficacy of chemotherapy and relieve the pain associated with colorectal cancer, a dual-drug delivery system (DDDS) is proposed. In this system, methotrexate (MTX) loaded CaCO₃ (CaCO₃/MTX) and aspirin (Asp) are co-entrapped in the hydrogels of alginate (Alg) and sodium carboxymethyl cellulose (CMC) crosslinked with Ca²⁺. The hydrogels can protect the anti-cancer drug of MTX from being absorbed in stomach and small intestine and ensure their efficacy at the target site of colorectum. More importantly, dual pH-responsive drug delivery can be achieved by the DDDS. Because the pH varies at small intestine and colorectum of human body, dual pH-responsive delivery of Asp and MTX can be achieved at the two organs, respectively, in response to ambient pH. These finding are of significant importance for medical science and pharmaceutics.

Applications of Biopolymers for Drugs and Probiotics Delivery

Research regarding the use of biopolymers has been of great interest to scientists, the medical community, and the industry especially in recent years. Initially used for food applications, the special properties extended their use to the pharmaceutical and medical industries. The practical applications of natural drug encapsulation materials have emerged as a result of the benefits of the use of biopolymers as edible coatings and films in the food industry. This review highlights the use of polysaccharides in the pharmaceutical industries and as encapsulation materials for controlled drug delivery systems including probiotics, focusing on their development, various applications, and benefits. The paper provides evidence in support of research studying the use of biopolymers in the development of new drug delivery systems, explores the challenges and limitations in integrating polymer-derived materials with product delivery optimization, and examines the host biological/metabolic parameters that can be used in the development of new applications.

Application of Nanocellulose Derivatives as Drug Carriers; A Novel Approach in Drug Delivery

BACKGROUND

The production of nanocellulose for drug delivery systems has achieved increased attention in the past decade. High capacity for swelling and absorption of the liquid phase, high flexibility in creating different derivatives, economical cost, and ease of access to the primary source, all of these properties have encouraged researchers to use nanocellulose and its derivatives as a high-performance drug carrier.

OBJECTIVE

The recent progress summary of cellulose-based nanocarriers designing and practical approaches in drug delivery.

METHODS

We conducted a literature review on the development of the nanocellulose and its derivatives as a high-performance drug carrier.

RESULTS

In this review, we have attempted to present the latest advances in cellulose modifications for the design of pharmaceutical nanocarriers. At first, cellulose properties and structural classification of nanocellulose were introduced. Then, focusing on medical applications, some efforts and laboratory trials in cellulose-based nano designing were also discussed. The findings demonstrate the benefits of nanocellulose in drug delivery and its potential for modifying by adding functional groups to enhance drug delivery efficiency. Due to the physical and chemical properties of cellulose and its high flexibility to interact with other compounds, a broad perspective can be imagined in the diverse research and novel forms of nanocarriers.

CONCLUSION

The cellulose nanocarriers can be considered as an attractive platform for researchers to design new structures of pharmaceutical carriers and increase the efficiency of these nanocarriers in drug delivery for the treatment of diseases such as cancer.

Factors influencing the adhesive behavior of carboxymethyl cellulose-based hydrogel for food applications

Carboxymethyl cellulose (CMC) hydrogels have been used as adhesive materials for food and other newly emerged innovative applications. To increase the knowledge of CMC hydrogel-based adhesives and optimize the preparation and storage conditions in practical, we prepared CMC hydrogels for cigar wrapper application and investigated their adhesive performance as affected by different CMC type, concentration, pH, temperature, and storage time, etc. Two parameters, initial adhesiveness and peel strength were used to evaluate the adhesive behavior of CMC with paper and tobacco leaf. Sample C2 with relatively medium molecular weight and medium degree of substitution values showed the best adhesive performance. Hydrogels prepared using boiled water at neutral pH presented better adhesive behavior, which was not significantly affected by storage temperature (up to 13 days). The wettability, steady shear flow behavior, dynamic rheological properties, and stress recovery performance of CMC hydrogel were measured, and their correlations to the adhesive behavior were discussed.

Selective Loading and Prolonged Release of 5-Fluorouracil in the Nanoconfined Interlayer Space of Montmorillonite

Montmorillonite was used as a carrier for the anticancer drug 5-fluorouracil (5FU). The selective loading of 5FU into the nanoconfined interlayer space of montmorillonite was achieved by rinsing off the weakly bonded 5FU from the external surface. The 5FU loading content in montmorillonite was 3.2 mass%. The intercalated 5FU was in an amorphous state and might be arranged as a roughly vertical monolayer in the interlayer space of montmorillonite. The intercalated 5FU showed a high thermal stability due to the protection of the montmorillonite layers. The release profiles of the intercalated 5FU were well fitted with the modified Korsmeyer-Peppas model. The montmorillonite exhibited a prolonged release of 5FU due to the restriction of the outward diffusion of intercalated 5FU. The 5FU/montmorillonite system has promising potential for oral administration for colonspecific delivery.