Electrospun lignin-based composite nanofiber membrane as high-performance absorbent for water purification

Lignin: A valuable and promising bio-based absorbent for dye removal applications

The importance of environmental issues and the existence of humans have led to the recognition of environmental concerns as the main risk to modern life. Notably, one major concern for protecting and managing the environment and human health is the presence of dyes in wastewater. Therefore, before discharging wastewater into mainstream water, it is crucial to remove dyes. Among all lignocellulosic materials, lignin is a highly fragrant biopolymer. Its abundant availability, complex structure, and numerous functional moieties, including hydroxyl, carboxyl, and phenolic, are used in different chemicals and applications. Based on this, lignin is a very useful green material for adsorption, specifically in removing both heavy metals and organic pollutants from wastewater. This article describes the use of lignin-based adsorbents as a recent breakthrough in the removal of dye from aqueous solutions. On the other hand, the review intends to encourage readers to study both established and novel avenues in lignin-based dye removal materials.

High performance polyvinyl alcohol/lignin fibers with excellent mechanical and water resistance properties

To address the shortcoming of Polyvinyl alcohol (PVA) fibers for food or medical packaging materials including low mechanical strength and poor water resistance, lignin (LN) was used as raw material, acetone/H2O as solvent to self-assemble into lignin nanoparticles (LNP) by adverse solvent precipitation approach, and then PVA/LNP composite fibers with different LNP contents were fabricated successfully by wet and dry spinning. Herein, vast hydrophilic hydroxyl groups in PVA decreased owing to the hydrogen bond between LN and PVA, Especially, with only 0.5 wt% loading of LNP into the PVA/LNP fibers, the diameter was 94.4 dtex, tensile strength was 10.1 cN/dtex (1279.8 MPa), initial modulus was 94.7 cN/dtex (12.0 GPa), the crystallinity was 56.7 %, the orientation was 97.1 %, and water contact angle was 103.1°. Compared with pure PVA fibers, the tensile strength of PVA/LNP-0.5 fibers was increased by 44.2 % and the contact angle was increased 37°. This work provides novel insights into obtaining lignin-reinforced PVA composite fibers with strong mechanical properties and excellent water resistance properties, indicating the potential of the PVA/LNP fibers for food or medical packaging application.

Design and function of lignin/silk fibroin-based multilayer water purification membranes for dye adsorption

The treatment of dye wastewater poses a significant challenge to the sewage recycling industries. However, the reduction of secondary pollution resulting from the membrane residues, to maintain high performance, remains a considerable obstacle. A novel approach for the fabrication of multilayer nanofiber structures using a layer-by-layer electrostatic spinning technique with biological materials was reported in this study. Incorporating the chemical adsorption advantages of lignin nanofiber and the physical adsorption advantages of silk fibroin (SF) nanofiber enabled the full realization of excellent dye interception performance. A comparative analysis was conducted on the lignin derived from eucalyptus, pine, and straw to determine the most suitable option. Notably, eucalyptus lignin exhibited superior antimicrobial properties. The adsorption of crystal violet by eucalyptus lignin/SF membrane was consistent with the Freundlich isotherm model and the pseudo-second-order kinetic model, revealing a chemisorption mechanism involving Π-Π conjugation, hydrogen bonding, and the binding of anions and cations. The lignin/SF membrane exhibited a retention rate exceeding 99.5 % for crystal violet, methylene blue, and brilliant green dyes. Furthermore, it demonstrated efficacy in retaining heavy metal ions, including cadmium and copper. The original biomass material imparts the property of rapid degradation to a multilayer membrane that can be used as an effective and eco-friendly water purification material.

Going beyond Cellulose and Chitosan: Synthetic Biodegradable Membranes for Drinking Water, Wastewater, and Oil-Water Remediation

Membrane technology is an efficient way to purify water, but it generates non-biodegradable biohazardous waste. This waste ends up in landfills, incinerators, or microplastics, threatening the environment. To address this, research is being conducted to develop compostable alternatives that are sustainable and ecofriendly. Bioplastics, which are expected to capture 40% of the market share by 2030, represent one such alternative. This review examines the feasibility of using synthetic biodegradable materials beyond cellulose and chitosan for water treatment, considering cost, carbon footprint, and stability in mechanical, thermal, and chemical environments. Although biodegradable membranes have the potential to close the recycling loop, challenges such as brittleness and water stability limit their use in membrane applications. The review suggests approaches to tackle these issues and highlights recent advances in the field of biodegradable membranes for water purification. The end-of-life perspective of these materials is also discussed, as their recyclability and compostability are critical factors in reducing the environmental impact of membrane technology. This review underscores the need to develop sustainable alternatives to conventional membrane materials and suggests that biodegradable membranes have great potential to address this challenge.

Recent advancements in lignocellulose biomass-based carbon fiber: Synthesis, properties, and applications

A growing need to reduce the global carbon footprint has prompted all sectors to make significant efforts in this direction. For example, there has been much focus on green carbon fiber sustainability. For example, it was found that the polyaromatic heteropolymer lignin might act as an intermediary in synthesising carbon fiber. Biomass is seen as a potential carbon accommodated solid natural sources that protects the nature and has a big overall supply and widespread distribution. With growing environmental concern in recent years, biomass has gained appeal as a raw material for production of carbon fibers. Especially, the positives of lignin material include its reasonable budget, sustainability, and higher carbon content, which makes it a dominating precursor. This review has examined a variety of bio precursors that help produce lignin and have higher lignin concentrations. In addition, there has been much research on plant sources, lignin types, factors affecting carbon fiber synthesis, spinning methods, stabilization, carbonization, and activation the characterisation techniques used for the lignin carbon fiber to comprehend the structure and features. In addition, an overview of the applications that use lignin carbon fiber has been provided.

Fabrication of alkali lignin-based emulsion electrospun nanofibers for the nanoencapsulation of beta-carotene and the enhanced antioxidant property

For the greater utilization of β-carotene in antioxidant material, β-carotene-loaded emulsion stabilized by alkali lignin (AL) was successfully electrospinning with poly (vinyl alcohol) (PVA) (PVA/AL/β-carotene nanofiber). Transmission electron microscopy demonstrated the core-shell structure of nanofiber with the average diameter being 356.31 nm, and 85.7 % of β-carotene was effectively encapsulated into the core section. Fourier transform infrared spectra and differential scanning calorimetry revealed the good compatibility and decreased crystallinity of β-carotene, favoring its stability and solubility, respectively. As expected, the PVA/AL/β-carotene nanofiber exhibited higher antioxidant activity than free β-carotene due to the protection of AL matrix and the special structure of nanofiber, as the DPPH free radical scavenging rate being 90.7 % at 7th day. The sustained release behavior of β-carotene and AL from fiber followed Fickian diffusion model, contributing to the greater protection for fish oil than that of emulsion. Thus, this study provides an approach to develop hydrophobic compounds-loaded emulsion electrospun antioxidant material with controlled release property and enhanced activity.

Lignin-based electrospinning nanofibers for reversible iodine capture and potential applications

The capture of radioactive iodine has recently attracted much attention due to the release of radioactive iodine during nuclear waste disposal and disasters. Exploring highly efficient, sustainable, and eco-friendly materials for capturing radioactive iodine has great significance in developing safe nuclear energy. We reported highly efficient, natural, lignin-based, electrospun nanofibers (LNFs) for reversible radioiodine capture. Abundant iodine adsorption sites, such as functional groups and the interaction between the intermolecular forces exist in LNFs. The capacity of the LNFs for the saturated adsorption of iodine was found to be 220 mg·g^-1, which is higher than that of the majority of bio-based adsorbents studied. Moreover, the LNFs exhibited an excellent recycling behavior, and their absorption capacity remained at 84.72% after 10 recycles. Therefore, the results imply that the lignin-based nanofibers can act as a natural, sustainable and eco-friendly packed material for the purification columns in industrial applications. The results demonstrate that the novel, nanostructured, natural biomass, as an ideal candidate has the potential for practical nuclear wastewater purification.

A comprehensive review on electrospun nanohybrid membranes for wastewater treatment

Electrospinning, being a versatile and straightforward method to produce nanofiber membranes, has shown significant advancement in recent years. On account of the unique properties such as high surface area, high porosity, mechanical strength, and controllable surface morphologies, electrospun nanofiber membranes have been found to have a great potential in many disciplines. Pure electrospun fiber mats modified with different techniques of surface modification and additive incorporation have exhibited enhanced properties compared to traditional membranes and are even better than the as-prepared electrospun membranes. In this review, we have summarized recently developed electrospun nanohybrids fabricated by the incorporation of functional specific nanosized additives to be used in various water remediation membrane techniques. The adsorption, filtration, photocatalytic, and bactericidal capabilities of the hybrid membranes in removing common major water pollutants such as metal ions, dyes, oils, and biological pollutants have been discussed. Finally, an outlook on the future research pathways to fill the gaps existing in water remediation have been suggested.

Recent Progress on Nanomaterial-Based Membranes for Water Treatment

Nanomaterials have emerged as the new future generation materials for high-performance water treatment membranes with potential for solving the worldwide water pollution issue. The incorporation of nanomaterials in membranes increases water permeability, mechanical strength, separation efficiency, and reduces fouling of the membrane. Thus, the nanomaterials pave a new pathway for ultra-fast and extremely selective water purification membranes. Membrane enhancements after the inclusion of many nanomaterials, including nanoparticles (NPs), two-dimensional (2-D) layer materials, nanofibers, nanosheets, and other nanocomposite structural materials, are discussed in this review. Furthermore, the applications of these membranes with nanomaterials in water treatment applications, that are vast in number, are highlighted. The goal is to demonstrate the significance of nanomaterials in the membrane industry for water treatment applications. It was found that nanomaterials and nanotechnology offer great potential for the advancement of sustainable water and wastewater treatment.

Lignin-derived (nano)materials for environmental pollution remediation: Current challenges and future perspectives

The supply of affordable drinking and sufficiently clean water for human consumption is one of the world's foremost environmental problems and a large number of scientific research works are addressing this issue Various hazardous/toxic environmental contaminants in water bodies, both inorganic and organic (specifically heavy metals and dyes), have become a serious global problem. Nowadays, extensive efforts have been made to search for novel, cost effective and practical biosorbents derived from biomass resources with special attention to value added, biomass-based renewable materials. Lignin and (nano)material adorned lignin derived entities can proficiently and cost effectively remove organic/inorganic contaminants from aqueous media. As low cost of preparation is crucial for their wide applications in water/wastewater treatment (particularly industrial water), future investigations must be devoted to refining and processing the economic viability of low cost, green lignin-derived (nano)materials. Production of functionalized lignin, lignin supported metal/metal oxide nanocomposites or hydrogels is one of the effective approaches in (nano)technology. This review outlines recent research progresses, trends/challenges and future prospects about lignin-derived (nano)materials and their sustainable applications in wastewater treatment/purification, specifically focusing on adsorption and/or catalytic reduction/(photo)degradation of a variety of pollutants.

Efficient degradation of perfluorooctanoic acid by electrospun lignin-based bimetallic MOFs nanofibers composite membranes with peroxymonosulfate under solar light irradiation

Perfluorooctanoic acid (PFOA) has demonstrated potential toxicity to human health and has been detected in different environmental matrices due to its stable physical and chemical properties. To degrade PFOA under solar light irradiation, we fabricated a lignin/polyvinyl alcohol (PVA)/Co/Fe metal-organic frameworks (lignin/PVA/bi-MOFs) composite membrane via a typical electrospinning and in-situ solvothermal method for the catalytic degradation of PFOA. In the peroxymonosulfate (PMS)/membranes/solar light system, Electron paramagnetic resonance analysis (EPR) demonstrated the sulfate radicals (SO₄^-) and hydroxyl radicals (OH) were generated by activating PMS with transition metal and solar light irradiation. Lignin/PVA/bi-MOFs showed outstanding performance in that 89.6% of PFOA was degraded within 3 h under optimal conditions. Compared with that in solar light, only 59.6% PFOA was degraded in the dark, and the rate constant of PFOA degradation decreased from 0.0150 min^-1 to 0.0046 min^-1. Moreover, lignin/PVA/bi-MOFs were reused after simply rinsing with ultra-pure water and the degradation capacity of lignin/PVA/bi-MOFs remained at 77% after 4 cycles. The results might provide a new concept for the design of bimetallic MOFs for applications in organic pollutant removal.

Effect of lignin on the self-bonding of a natural fiber material in a hydrothermal environment: Lignin structure and characterization

Self-bonding natural fiber materials (SNFMs) were prepared at different initial moisture contents (IMCs) through a molding pressing process. The self-bonding mechanism of the SNFMs was deduced from the chemical and structural changes of lignin and their mechanical strengths. The structural transformations of milled wood lignin (MWL) in the SNFMs were investigated by two-dimensional heteronuclear single quantum coherence, quantitative 31P-nuclear magnetic resonance spectra, gelpermeation chromatography, and thermogravimetric analysis. As IMC increased from 0% to 80%, the tensile strength increased from 23.0 to 70.0 MPa and the density increased from 0.99 to 1.05 g/cm3. IMC affected the distribution and abundance of the typical lignin linkages (β-O-4', β-β, and β-5') and the S-OH/G-OH ratios of lignin. Moreover, as IMC increased, the aliphatic hydroxyl groups proportionally decreased, while the condensed phenolic and non-condensed phenolic hydroxyl groups increased, the molecular weight of MWL became larger, and the thermal stability of lignin improved. These findings indicate the simultaneous occurrence of depolymerization and condensation reactions of lignin. The condensation reaction dominated, improving the mechanical strength of the material. Our results explain (at least partly) the self-bonding mechanism of SNFMs.