Preparation of biocompatible nano-ZnO/chitosan microspheres with multi-functions of antibacterial, UV-shielding and dye photodegradation

A 2D nanoflower-like ordered mesoporous Bi12ZnO20 catalyst with excellent photocatalytic antibacterial properties

The ordered mesoporous ZnO was successfully synthesized using the template method in this article, and Bi ions were etched into ZnO to form two-dimensional nanoflower structures of Bi12ZnO20 with NA3SSA as a guiding agent. The crystal structure, morphology, and optical properties of the photocatalyst were characterized by X-ray diffractometer (XRD), scanning electron microscope (SEM), energy-dispersive spectrometer(EDS), and ultraviolet-visible diffuse reflectance spectrum (UV-vis DRS). Under illumination conditions, the obtained materials exhibited excellent bactericidal ability against both gram-positive and gram-negative bacteria, as well as effective inhibition against fungi. Among them, the bactericidal effect of Pseudomonas aeruginosa was found to be the most rapid, achieving a sterilization rate of 100% within 30 min of light irradiation. Even after three cycles of antibacterial activity testing, the Bi12ZnO20 material still demonstrated good photocatalytic performance. The nanoflower-shaped materials provide an enhanced fluid adsorption capacity and more active centers for photocatalytic reactions while also improving light absorption capacity, photogenerated electron-hole separation efficiency, and electron transport efficiency. The cytotoxicity assessment of Bi12ZnO20 revealed no significant toxic effects. Therefore, this study presents a nanoflower-shaped material with highly efficient photocatalytic antibacterial properties for applications in production and daily life; it holds significant importance in eliminating harmful bacteria and plays a crucial role in environmental protection.

IMPORTANCE

The flower-shaped photocatalytic material Bi12ZnO20, consisting of nanoparticles, was successfully synthesized in this study. Rigorous antibacterial experiments were conducted on various fungi using the material, yielding excellent results. Furthermore, the application of this material for antibacterial treatment of livestock and poultry manure sewage in real-life scenarios demonstrated remarkable efficacy.

Fabrication of polymeric microspheres for biomedical applications

Polymeric microspheres (PMs) have attracted great attention in the field of biomedicine in the last several decades due to their small particle size, special functionalities shown on the surface and high surface-to-volume ratio. However, how to fabricate PMs which can meet the clinical needs and transform laboratory achievements to industrial scale-up still remains a challenge. Therefore, advanced fabrication technologies are pursued. In this review, we summarize the technologies used to fabricate PMs, including emulsion-based methods, microfluidics, spray drying, coacervation, supercritical fluid and superhydrophobic surface-mediated method and their advantages and disadvantages. We also review the different structures, properties and functions of the PMs and their applications in the fields of drug delivery, cell encapsulation and expansion, scaffolds in tissue engineering, transcatheter arterial embolization and artificial cells. Moreover, we discuss existing challenges and future perspectives for advancing fabrication technologies and biomedical applications of PMs.

Development of lactoferrin-coated multifunctional copolymer micelles to cross the blood-brain barrier

The blood-brain barrier (BBB) prevents pathogens and toxins in the bloodstream from reaching the brain, but also inhibits the delivery of agents intended to treat central nervous system disorders, such as Alzheimer's disease (AD). In this study, we prepared and evaluated a novel nano-delivery vehicle system composed of lactoferrin-conjugated (Lf-PIC@Se) micelles. We used a COOH-PEG-PAsp-PV@Se synthesis-based method to prepare the micelles, which involved self-assembly followed by EDC-NHS coupling. Using glutaminyl cyclase inhibitor 8 as a model encapsulated chemical, Lf-PIC@Se micelles achieved a good loading capacity. In vitro analysis demonstrated that Lf-PIC@Se/8 micelles were stable in both neutral and acidic pH solutions in the presence or absence of H2O2, and confirmed their biosafety and compatibility in PC12 and bEND.3 cells. Notably, the cell uptake of Lf-PIC@Se/C6 micelles was much higher than that of PIC@Se micelles, and occurred through LfR-mediated endocytosis. The presence of Se meant that Lf-PIC@Se micelles acted as ROS scavengers in PC12 cells under H2O2-induced oxidative stress, which inhibited oxidative damage and increased mitochondrial membrane potential. Hemolysis assays further demonstrated that Lf-PIC@Se represent a biocompatible carrier. Finally, in vivo experiments in mice suggested that Lf-PIC@Se micelles successfully crossed the BBB, confirming their potential as vehicles for drug delivery when treating AD and other central nervous system disorders.

Preparation and application of hemostatic microspheres containing biological macromolecules and others

Bleeding from uncontrollable wounds can be fatal, and the body's clotting mechanisms are unable to control bleeding in a timely and effective manner in emergencies such as battlefields and traffic accidents. For irregular and inaccessible wounds, hemostatic materials are needed to intervene to stop bleeding. Hemostatic microspheres are promising for hemostasis, as their unique structural features can promote coagulation. There is a wide choice of materials for the preparation of microspheres, and the modification of natural macromolecular materials such as chitosan to enhance the hemostatic properties and make up for the deficiencies of synthetic macromolecular materials makes the hemostatic microspheres multifunctional and expands the application fields of hemostatic microspheres. Here, we focus on the hemostatic mechanism of different materials and the preparation methods of microspheres, and introduce the modification methods, related properties and applications (in cancer therapy) for the structural characteristics of hemostatic microspheres. Finally, we discuss the future trends of hemostatic microspheres and research opportunities for developing the next generation of hemostatic microsphere materials.

Composite porphyrin-based conjugated microporous polymer/graphene oxide capable of photo-triggered combinational antibacterial therapy and wound healing

Developing antibiotic-free treatment strategies to cope with the crisis on drug-resistant bacteria, are urgently needed. Antibiotics-independent physical approaches, especially the non-invasive phototherapies, worked through the assistance of photosensitizer (PS), have geared intensive attention and interests. Here, composite porphyrin-based conjugated microporous polymer/graphene oxide, denoted as GO-TAPP, combining the advantages of each component perfectly, was developed as broad-spectrum antibacterial agent. GO-TAPP, prepared via the self-oxidation coupling of tetraethynyl porphyrin on the surface of graphene oxide, could exert synergistic photothermal (PTT, ascribed to the graphene) and photodynamic (PDT, derived from the Porphyrin polymer) antimicrobial effectiveness. Both the in vivo and in vitro experiments have confirmed GO-TAPP are extremely potent against the Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) pathogens, which presents a remarkably enhanced sterilizing effect in comparison with its counterparts (the bare GO, and TAPP). Meanwhile, the synergistic effect of GO-TAPP could significantly accelerate the healing of open wound infected by bacterial. Altogether, this work proposed a new approach for the rational preparation of highly biocompatible graphene-based composite materials as antibiotic-free agents with synergistic antibacterial effect to combat bacterial infections.

Hybrid nanostructures exhibiting both photocatalytic and antibacterial activity-a review

The most vital issues of the modern world for a sustainable future are "health" and "the environment." Scientific endeavors to tackle these two major concerns for mankind need serious attention. The photocatalytic activity toward curbing environmental pollution and antibacterial performance toward a healthy society are two directions that have been emphasized for decades. Recently, materials engineering, in their nanodimension, has shown tremendous possibilities to integrate these functionalities within the same materials. In particular, hybrid nanostructures have shown magnificent prospects to combat both crucial challenges. Many researchers are separately engaged in this important field of research but the collective knowledge on this domain which can facilitate them to excel is badly missing. The present article integrates the development of different hybrid nanostructures which exhibit both photocatalytic degradations of environmental pollutants and antibacterial efficiency. Various synthesis techniques of those hybrid nanomaterials have been discussed. Hybrid nanosystems based on several successful materials have been categorically discussed for better insight into the research advancement in this direction. In particular, Ag-based, metal oxides-based, layered carbon material-based, and Mexene- and self-cleaning-based materials have been chosen for detailing their performance as anti-pollutant and antibacterial materials. Those hybrid systems along with some miscellaneous booming nanostructured materials have been discussed comprehensively with their success and limitations toward their bifunctionality as antipollutant and antibacterial agents.

Eco synthesized chitosan/zinc oxide nanocomposites as the next generation of nano-delivery for antibacterial, antioxidant, antidiabetic potential, and chronic wound repair

The present research work aimed at synthesizing chitosan-coated Zinc oxide nanocomposites (NS-CS/ZnONCs) by a bio-inspired method using an aqueous extract of Nigella sativa (NS) seeds and employing a quality-by-design approach (Box-Behnken design). The biosynthesized NS-CS/ZnONCs were physicochemically characterized and subjected to their in-vitro and in-vivo therapeutic potential. The zeta potential value of -11.2 mV and -12.6 mV indicated the stability of NS-mediated synthesized zinc oxide nanoparticles (NS-ZnONPs) and NS-CS/ZnONCs, respectively. The particle size of NS-ZnONPs and NS-CS/ZnONCs were 288.1 nm and 130.2 nm, respectively, with PDI of 0.198 and 0.158. NS-ZnONPs and NS-CS/ZnONCs showed superior radical scavenging abilities, excellent α-amylase, and α-glucosidase inhibitory activities. Also, NS-ZnONPs and NS-CS/ZnONCs demonstrated effective antibacterial activity against selected pathogens. Furthermore, NS-ZnONPs and NS-CS/ZnONCs demonstrated significant (p < 0.001) wound closure with 93.00 ± 0.43 % and 95.67 ± 0.43 % on the 15th day of treatment at the dose of 14 mg/wound, compared to 93.42 ± 0.58 % of standard. Collagen turnover was represented by hydroxyproline, which was shown to be significantly (p < 0.001) higher in the NS-ZnONPs (60.70 ± 1.44 mg/g of tissue) and NS-CS/ZnONCs (66.10 ± 1.23 mg/g of tissue) treatment groups than in the control group (47.7 ± 0.81 mg/g of tissue). Thus the NS-ZnONPs and NS-CS/ZnONCs could effectively develop promising drugs to inhibit pathogens and chronic tissue repair.

Application of Biomedical Microspheres in Wound Healing

Tissue injury, one of the most common traumatic injuries in daily life, easily leads to secondary wound infections. To promote wound healing and reduce scarring, various kinds of wound dressings, such as gauze, bandages, sponges, patches, and microspheres, have been developed for wound healing. Among them, microsphere-based tissue dressings have attracted increasing attention due to the advantage of easy to fabricate, excellent physicochemical performance and superior drug release ability. In this review, we first introduced the common methods for microspheres preparation, such as emulsification-solvent method, electrospray method, microfluidic technology as well as phase separation methods. Next, we summarized the common biomaterials for the fabrication of the microspheres including natural polymers and synthetic polymers. Then, we presented the application of the various microspheres from different processing methods in wound healing and other applications. Finally, we analyzed the limitations and discussed the future development direction of microspheres in the future.

Nano zinc oxide-functionalized nanofibrous microspheres: A bioactive hybrid platform with antimicrobial, regenerative and hemostatic activities

Bioactive hybrid constructs are at the cutting edge of innovative biomaterials. PLA nanofibrous microspheres (NF-MS) were functionalized with zinc oxide nanoparticles (nZnO) and DDAB-modified nZnO (D-nZnO) for developing inorganic/nano-microparticulate hybrid constructs (nZnO@NF-MS and D-nZnO@NF-MS) merging antibacterial, regenerative, and haemostatic functionalities. The hybrids appeared as three-dimensional NF-MS frameworks made-up entirely of interconnecting nanofibers embedding nZnO or D-nZnO. Both systems achieved faster release of Zn²⁺ than their respective nanoparticles and D-nZnO@NF-MS exhibited significantly greater surface wettability than nZnO@NF-MS. Regarding bioactivity, D-nZnO@NF-MS displayed a significantly greater and fast-killing effect against Staphylococcus aureus. Both nZnO@NF-MS and D-nZnO@NF-MS showed controllable concentration-dependent cytotoxicity to human gingival fibroblasts (HGF) compared with pristine NF-MS. They were also more effective than pristine NF-MS in promoting migration of human gingival fibroblasts (HGF) in the in vitro wound healing assay. Although D-nZnO@NF-MS showed greater in vitro hemostatic activity than nZnO@NF-MS, (blood-clotting index 22.82 ± 0.65% vs.54.67 ±2.32%) both structures exhibited instant hemostasis (0 s) with no blood loss (0 mg) in the rat-tail cutting technique. By merging the multiple therapeutic bioactivities of D-nZnO and the 3D-structural properties of NF-MS, the innovative D-nZnO@NF-MS hybrid construct provides a versatile bioactive material platform for different biomedical applications.

Preparation and characterization of PVA/arginine chitosan/ZnO NPs composite films

In this study, arginineated chitosan (ACS) was used as a soft brain membrane and chelating agent to synthesize ACS-ZnO NPs, and then ACS and ACS-ZnO NPs were added to a polyvinyl alcohol (PVA) matrix as an antimicrobial agent to form films by casting. The formation and structural morphology of ACS and ACS-ZnO NPs were investigated by applying FTIR, ¹H NMR, XRD, EDS, SEM, and TEM techniques, and ACS has shown better water solubility. The cytotoxicity experiments of ACS and ACS-ZnO NPs on A549 cells showed that both had good cytocompatibility. The incorporation of ACS and ACS-ZnO NPs improves the composite film's mechanical properties, water barrier, and oxygen barrier and exhibits excellent antibacterial activities against S. aureus and E. coli. More importantly, in addition to extending the shelf life of cherry tomatoes, the composite film is also biodegradable to some degree. Therefore, polyvinyl alcohol films based on ACS and ACS-ZnO NPs added as antimicrobial agents have great potential for food packaging applications.

Eco-friendly and facile preparation of chitosan-based biofilms of novel acetoacetylated lignin for antioxidant and UV-shielding properties

The development of eco-friendly, sustainable, biodegradable, and biocompatible green biopolymer composites is becoming increasingly important. In this study, acetoacetylated lignin (ATL) was obtained via an eco-friendly, facile one-step synthesis reaction, and chitosan (CS)-containing ATL films (CSL) were prepared. The chemical structural analysis of ATL confirmed that the acetoacetyl groups were successfully grafted onto kraft lignin (KL). ATL with adequate acetoacetyl groups exhibited enhanced molecular weight and antioxidant and ultraviolet (UV)-shielding properties. In particular, ATL, with a half maximal inhibitory concentration (IC₅₀) of 23.8 μg·mL^-1, exhibited superior antioxidant activity than butylated hydroxytoluene (38.3 μg·mL^-1) and KL (50.0 μg·mL^-1). When ATL was incorporated into the CS solution to prepare biofilms, the antioxidant activity, UV-shielding property, water resistance, and thermal stability of the CSL greatly improved. Notably, the UV-A and UV-B shielding properties of the 2 % CSL were 130 % and 78 % higher than those of the pure CS film, respectively. Therefore, ATL designed with lignin-derived multifunctional properties has potential applications as an antioxidant and UV-shielding bio-additive and shows significant prospects in food packaging and biomedical applications.

Enhanced treatment of organic matter in slaughter wastewater through live Bacillus velezensis strain using nano zinc oxide microsphere

Slaughter wastewater is an important and wide range of environmental issues, and even threaten human health through meat production. A high efficiency and stability microsphere-immobilized Bacillus velezensis strain was designed to remove organic matter and inhibit the growth of harmful bacteria in process of slaughter wastewater. Bacillus velezensis was immobilized on the surface of sodium alginate (SA)/Polyvinyl alcohol (PVA)/Nano Zinc Oxide (Nano-ZnO) microsphere with the adhesion to bio-carrier through direct physical adsorption. Results indicated that SA/PVA/ZnO and SA/ZnO microspheres could inhibit E.coli growth with adding 0.15 g/L nano-ZnO and not affect Bacillus velezensis strain, and the removal the chemical oxygen demand (COD) rates of SA/PVA/ZnO microsphere immobilized cells are 16.99%, followed by SA/ZnO (13.69%) and free bacteria (7.61%) from 50% concentration slaughter wastewater within 24 h at 37 °C, pH 7.0, and 120 rpm, a significant difference was found between the microsphere and control group. Moreover, when the processing time reaches 36 h, COD degradation of SA/PVA/ZnO microsphere is obviously higher than other groups (SA/PVA/ZnO:SA/ZnO:control vs 18.535 : 15.446: 10.812). Similar results were obtained from 30% concentration slaughter wastewater. Moreover, protein degradation assay was detected, and there are no significant difference (SA/PVA/ZnO:SA/ZnO:control vs 35.4 : 34.4: 36.0). The design of this strategy could greatly enhance the degradation efficiency, inhibit the growth of other bacteria and no effect on the activity of protease in slaughter wastewater. These findings suggested that the nano-ZnO hydrogel immobilization Bacillus velezensis system wastewater treatment is a valuable alternative method for the remediation of pollutants from slaughter wastewater with a novel and eco-friendly with low-cost investment as an advantage.

Facile synthesis and characterization of chitosan/zinc oxide nanocomposite for enhanced antibacterial and photocatalytic activity

In this report, chitosan/zinc oxide (CS/ZnO) nanocomposite was synthesized using Sida acuta and assessed their antibacterial and photocatalytic properties. The formation of CS/ZnO nanocomposite was preliminary confirmed by colour change and UV-visible spectroscopy. The crystalline peaks related to CS and ZnO in CS/ZnO nanocomposite were demonstrated by XRD. Morphological analysis through FE-SEM and TEM showed a rod like appearance for ZnO NPs and agglomerated grains with rod shaped morphology was observed for the CS/ZnO nanocomposite. The peaks around 400-800 cm^-1 in the IR spectrum of nanocomposite indicated the vibrations of metal-oxygen (ZnO), whereas bands at 1659 cm^-1 and 1546 cm^-1 indicated the presence of amine groups, which confirms the CS in the synthesized CS/ZnO nanocomposite. The CS/ZnO nanocomposite exhibited remarkable growth inhibition activity against B. subtilis and E. coli with 22 ± 0.3 and 16.5 ± 0.5 mm zone of inhibitions. In addition, CS/ZnO nanocomposite treated cotton fabrics also exhibited antibacterial activity against B. subtilis and E. coli. Furthermore, the ZnO NPs and nanocomposite showed time depended photodegradation activity and revealed 76% and 91% decomposition of CR under sunlight irradiation. In conclusion, our study revealed that the functionalization of biopolymer CS to the inorganic ZnO enhances the bio and catalytic properties.

A potentially valuable nano graphene oxide/USPIO tumor diagnosis and treatment system

Due to increased requirements for precision cancer treatment, cancer chemotherapy and combination therapies have gradually developed in the direction of diagnosis and treatment integration. In this study, a non-toxic nano carrier that demonstrates integrated MRI signal enhancing performance, as well as better chemotherapy and photothermal conversion performance, was prepared and characterized. Furthermore, the carrier was used to construct an integrated system of tumor diagnosis and treatment. Our in vitro studies showed that this system has a considerable inhibition effect on tumor cells during the treatment of chemotherapy when combined with PTT, and in vivo studies showed that the system could improve the MRI signal of the tumor site with application of a safe dosage. Thus, this system based on NGO/USPIO has the potential to be a multi-functional nano drug delivery system integrating diagnosis and treatment benefits and applications that are worthy of further research.

Facile production of three-dimensional chitosan fiber embedded with zinc oxide as recoverable photocatalyst for organic dye degradation

Herein we report on a facile and green strategy for continuous production of chitosan-zinc oxide fibers and then compare their photodegradation performance against three organic dyes (i.e., methylene blue (MB), methyl orange (MO) and Rhodamine B, respectively) under different lights. Chitosan-zinc hydrogel fibers (CS/Zn) with different zinc loadings are obtained by direct mixing of chitosan and zinc acetate solutions using a double-syringe injection device. The as-prepared CS/Zn fibers are then immersed into glutaraldehyde (GA) and sodium hydroxide solutions, respectively, and dried at T = 50 °C. The resultant CS/ZnO/GA fibers of ca. 617 μm in diameter are characterized using X-ray diffraction (XRD), thermogravimetric analysis and field emission scanning electron microscope (FE-SEM). XRD and FE-SEM data confirm that the CS/ZnO/GA fibers consist of a large amount of hexagonal wurtzite ZnO nanorods up to 550 nm in length, and exhibit three-dimensional interconnected macroporous architecture. Photodegradation results clearly show that the CS/ZnO/GA fibers are effective for the removal of organic dyes upon UV irradiation and can be easily recovered and reused for at least 6 consecutive cycles. Unlike most reported CS/ZnO nanocomposites, the current CS/ZnO/GA fiber shows a higher adsorption of cationic MB rather than anionic MO, the mechanism of which is proposed.

Starch, cellulose, pectin, gum, alginate, chitin and chitosan derived (nano)materials for sustainable water treatment: A review

Natural biopolymers, polymeric organic molecules produced by living organisms and/or renewable resources, are considered greener, sustainable, and eco-friendly materials. Natural polysaccharides comprising cellulose, chitin/chitosan, starch, gum, alginate, and pectin are sustainable materials owing to their outstanding structural features, abundant availability, and nontoxicity, ease of modification, biocompatibility, and promissing potentials. Plentiful polysaccharides have been utilized for making assorted (nano)catalysts in recent years; fabrication of polysaccharides-supported metal/metal oxide (nano)materials is one of the effective strategies in nanotechnology. Water is one of the world's foremost environmental stress concerns. Nanomaterial-adorned polysaccharides-based entities have functioned as novel and more efficient (nano)catalysts or sorbents in eliminating an array of aqueous pollutants and contaminants, including ionic metals and organic/inorganic pollutants from wastewater. This review encompasses recent advancements, trends and challenges for natural biopolymers assembled from renewable resources for exploitation in the production of starch, cellulose, pectin, gum, alginate, chitin and chitosan-derived (nano)materials.

A journey to the world of fascinating ZnO nanocomposites made of chitosan, starch, cellulose, and other biopolymers: Progress in recent achievements in eco-friendly food packaging, biomedical, and water remediation technologies

Green chemistry or in other words "green world" is referred to a sustainable environment using biocompatible, biodegradable, renewable, economical, and simple materials, and methods. Without any exaggeration, the exceptional chemical and physical properties of ZnO bionanocomposites beside various utilizations, make it vital materials in research and green chemistry field. Biocompatible ZnO nanoparticles with fascinating antimicrobial, physicochemical, as well as photocatalytic performance could be applied as a prominent candidate to reinforce diverse biopolymer matrixes, for instance, chitosan, starch, cellulose, gelatin, alginate, poly(hydroxyalkanoates), carrageenan, and so on. With a combination of advantageous properties of these materials, they could be illustrated specific utilizations in different areas. In this regard, the following context focuses on highlighting the recent achievements of this category of material on three important and widely used scopes: eco-friendly food packaging, biomedical specially wound dressings, and water remediation technologies.

Optimization by Central Composite Experimental Design of the Synthesis of Physically Crosslinked Chitosan Spheres

Chitosan (CS) has special properties such as biocompatibility, biodegradability, antibacterial, and biological activity which make this material is currently studied in various applications, including tissue engineering. There are different methods to modify the morphology of CS. Most use chemical crosslinking agents, however, those methods have disadvantages such as low polymer degradability and unwanted side effects. The objective of this research was to obtain CS spheres through the physical crosslinking of commercial CS without using crosslinking agents through a simple coacervation method. A central composite experimental design was used to optimize the synthesis of the CS spheres and by the response surface methodology it was possible to obtain CS spheres with the smallest diameter and the most regular morphology. With the optimal formulation (CS solution 1.8% (w/v), acetic acid (AAC) solution 1% (w/v), sodium hydroxide (NaOH) solution 13% (w/v), relative humidity of (10%) and needle diameter of 0.6 mm), a final sphere diameter of 1 mm was obtained. Spheres were characterized by physical, chemical, thermal, and biological properties in simulated body fluid (SBF). The results obtained allowed us to understand the effect of the studied variables on the spheres' diameter. An optimized condition facilitated the change in the morphology of the CS while maintaining its desirable properties for use in tissue engineering.

Poly-tetrahydropyrimidine Antibacterial Hydrogel with Injectability and Self-Healing Ability for Curing the Purulent Subcutaneous Infection

Infections caused by pathogenic microorganisms have always been the Achilles heel in the clinic. In this work, to overcome this conundrum, we proposed an injectable multifunctional hydrogel material with outstanding antibacterial properties and self-healing properties and no adverse effects on health. The cross-linked hydrogel with three-dimensional (3D) networks was quickly formed via the dynamic Schiff base between amino-modified poly-tetrahydropyrimidine (PTHP-NH₂) and multiple vanillin polymer P(DMA-VA) in 30 s. This hydrogel composite presents effective defense against both Gram-positive and Gram-negative bacteria, especially for the pyogenic Staphylococcus aureus. Moreover, the hydrogel showed almost no hemolysis and cytotoxicity. In vivo investigations indicated that hydrogels effectively killed S. aureus and protected against deterioration of inflammation. Besides, bioimaging of mice demonstrated that the hydrogel could be completely metabolized within 16 h. In a nutshell, given its outstanding antibacterial property and biocompatibility, the novel hydrogel could be an ideal candidate for the subcutaneous infection application.

Effects of Ultrasonication Time on the Properties of Polyvinyl Alcohol/Sodium Carboxymethyl Cellulose/Nano-ZnO/Multilayer Graphene Nanoplatelet Composite Films

Ultrasonication-assisted solution casting was used to prepare polyvinyl alcohol (PVA)/sodium carboxymethyl cellulose (CMC)/nano-ZnO/multilayer graphene nanoplatelet (xGnP) composite films; the performances (mechanical properties, water vapor permeability (WVP), biodegradability and antibacterial activity) of these films were investigated as a function of the ZnO NPs:xGnP mass ratio and ultrasonication time. Intermolecular interactions among ZnO NPs, xGnP and the PVA/CMC matrix were shown to improve WVP, while X-ray diffraction and scanning electron microscopy analyses revealed that the internal reticular structure of ultrasound-treated PVA/CMC/ZnO NPs/xGnP composite films was in a fluffier state than that of the untreated composite films and the PVA/CMC film. The incorporation of ZnO NPs and xGnP into the composite film reduced its tensile strength and elongation at break, and increased antibacterial activity and biodegradability. In addition, we carried out the experiment of strawberry preservation and measured weight loss ratio, firmness, content of total soluble solids and titration acid. Finally, the composite film of 7:3 had the best preservation effect on strawberries. Thus, the obtained results paved the way to develop novel biodegradable composite films with antimicrobial activity for a wide range of applications.