Neoteric approach for efficient eco-friendly dye removal and recovery using algal-polymer biosorbent sheets: Characterization, factorial design, equilibrium and kinetics

A spherical adsorbent produced from a bagasse biochar chitosan assembly for selective adsorption of platinum-group metals from wastewater

This study addresses the challenge of platinum-group metal scarcity by exploring the adsorption of these metals from industrial wastewater. An inexpensive adsorbent with selective platinum-group metal adsorption capacity, named chitosan/citric acid@diatomaceous earth-sugarcane bagasse (CTS/CA@DE-SBS), was newly synthesized. The material features a double coating of chitosan and diatomite on bagasse biochar, and it exhibits an excellent adsorption performance for platinum-group metals due to the synergistic effects of the biochar and chitosan-diatomaceous earth intercross-linked coatings. CTS/CA@DE-SBS achieved an 81 % adsorption efficiency and a static saturated adsorption capacity of 217 mg/g for Pt (IV) in water. Notably, the material exhibited selective adsorption properties for platinum-group metals dissolved in diverse aqueous solutions. The potential for the secondary recovery of platinum-group metals in complex aqueous bodies further underscores the significance of this adsorbent. In conclusion, this research introduces a promising solution for platinum-group metal shortages, offering a cost-effective and selective adsorbent with potential applications in the secondary recovery of these metals from industrial wastewater.

Biomimetic ZrO2-modified seaweed residue with excellent fluorine/ bacteria removal and uranium extraction properties for wastewater purification

Exploring and developing promising biomass composite membranes for the water purification and waste resource utilization is of great significance. The modification of biomass has always been a focus of research in its resource utilization. In this study, we successfully prepare a functional composite membrane, activated graphene oxide/seaweed residue-zirconium dioxide (GOSRZ), with fluoride removal, uranium extraction, and antibacterial activity by biomimetic mineralization of zirconium dioxide nanoparticles (ZrO2 NPs) on seaweed residue (SR) grafted with oxidized graphene (GO). The GOSRZ membrane exhibits highly efficient and specific adsorption of fluoride. For the fluoride concentrations in the range of 100-400 mg/L in water, the removal efficiency can reach over 99 %, even in the presence of interfering ions. Satisfactory extraction rates are also achieved for uranium by the GOSRZ membrane. Additionally, the antibacterial performance studies show that this composite membrane efficiently removes Escherichia coli (E. coli) and Methicillin-resistant Staphylococcus aureus (MRSA). The high adsorption of F- and U(VI) to the composite membrane is ascribed to the ionic exchange and coordination interactions, and its antibacterial activity is caused by the destruction of bacterial cell structure. The sustainability of the biomass composite membranes is further evaluated using the Sustainability Footprint method. This study provides a simple preparation method of biomass composite membrane, expands the water purification treatment technology, and offers valuable guidance for the resource utilization of seaweed waste and the removal of pollutants in wastewater.

A new tannin-based adsorbent synthesized for rapid and selective recovery of palladium and gold: Optimization using central composite design

A tannin-based adsorbent was synthesized by pomegranate peel tannin powder modified with ethylenediamine (PT-ED) for the rapid and selective recovery of palladium and gold. To characterize PT-ED, field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDS-Mapping), and Fourier transform infrared spectroscopy (FT-IR) were used. Central composite design (CCD) was used for optimization. The kinetic, isotherm, interference of coexisting metal ions, and thermodynamics were studied. The optimal conditions, including Au (III) concentration = 30 m g L - 1 , Pd (II) concentration = 30 m g L - 1 , adsorbent mass = 26 mg, pH = 2, and time = 26 min with the sorption percent more than 99 %, were anticipated for both metals using CCD. Freundlich model and pseudo-second-order expressed the isotherm and kinetic adsorption of the both metals. The inhomogeneity of the adsorbent surface and the multi-layer adsorption of gold and palladium ions on the PT-ED surface are depicted by the Freundlich model. The thermodynamic investigation showed that P d 2 + and A u 3 + ions adsorption via PT-ED was an endothermic, spontaneous, and feasible process. The maximum adsorption capacity of P d 2 + and A u 3 + ions on PT-ED was 261.189 m g g - 1 and 220.277 m g g - 1 , respectively. The probable adsorption mechanism of P d 2 + and A u 3 + ions can be ion exchange and chelation. PT-ED (26 mg) recovered gold and palladium rapidly from the co-existing metals in the printed circuit board (PCB) scrap, including Ca, Zn, Si, Cr, Pb, Ni, Cu, Ba, W, Co, Mn, and Mg with supreme selectivity toward gold and palladium. The results of this work suggest the use of PT-ED with high selectivity and efficiency to recover palladium and gold from secondary sources such as PCB scrap.

Microalgal-based macro-hollow loofah fiber bio-composite for methylene blue removal: A promising step for a green adsorbent

This study looked into how well the macro-hollow loofah fiber with and without the bio-attaching with green microalga (Chlamydomonas reinhardtii OR242521) was applied methylene blue elimination from water. Based on the results, the biosorption capacity of loofah sponge for methylene blue significantly increased with the increase of contact time, weight of microalgal biofilm, and methylene blue concentration. The maximum biosorption capacity was achieved after 120 min, after 0.042 mgg-1 biofilm weight, and MB concentration of 140 mgL-1. Furthermore, methylene blue's biosorption capacity was strongly affected by pH, reaching its maximum at pH 7. The biosorption capacity of the bio-attached loofah sponge was much higher than that of the loofah sponge, revealing that the microalgae bio-attachment enhanced the biosorption capacity of the loofah sponge. At the end of the MB biosorption process, the used bio-attached loofah sponge can still be utilized once more for the same purpose after the desorption of MB but with a lower biosorption capacity. Furthermore, the loofah sponge could also be applied as a bio-sorbent after domestic use. According to this study, the loofah sponge with or without algal biofilm attachment could be applied as a low-cost efficient bio-sorbent for methylene blue removal from water. However, the loofah sponge's ability for biosorption was dramatically increased by the bio-attachment of microalgae, making it a more potent bio-sorbent. Likewise, this study offers insights into the variables influencing the biosorption capacity of loofah sponges and bio-attached loofah sponges, which could be beneficial for enhancing the biosorption processes.

Phyto-assisted synthesis of CuO/industrial waste derived biochar composite for adsorptive removal of doxycycline hydrochloride and recycling of spent biochar as green energy storage device

The highest exposure of Endocrine disrupting compounds (EDC) into the water bodies as a result of extensive production and application of Covid-19 related drugs is a growing concern now a days. Herein, a novel nanocomposite material was developed by impregnating green synthesized copper oxide nanoparticles on the porous surface of fabric waste derived biochar to eliminate the concerned EDCs along with a sustainable disposal strategy for the spent adsorbent. Morphological characterizations by Field emission scanning electron microscopy confirmed the formation of hierarchical porous structured material. X-ray analysis revealed presence of both amorphous nature of biochar matrix as well as the crystalline nature attributed from monodispersion of copper oxide nanoparticles onto biochar surface. Batch sorption study showed removal of doxycycline hydrochloride (DOX) of >97% after 2 h at pH 7, 30 mg L-1 initial concentration of DOX and 2 g L-1 of adsorbent dose at room temperature after a two-step optimization process. Spectroscopic study and Raman shift suggested that pore filling, strong complexation and electrostatic interactions maximise the adsorption of DOX in the CuO/biochar composite as compared to the pristine biochar. However disposal of spent adsorbent is a crucial aspect for the environment and therefore, a sustainable recycling strategy for DOX loaded adsorbent as electrode material has been proposed for the first time in this study. Maximum specific capacitance value was observed in the range of 221.9-297.3 F g-1 for the DOX loaded nanocomposite at 1 mV s-1 comparable with other reported heteroatom-doped carbonaceous material as electrode. Therefore the excellent adsorption capacity of green synthesized CuO/biochar composite and its recycling after DOX adsorption can be recommended as a sustainable solution for mitigation of pharmaceuticals from wastewater. A detail study on degradation of DOX into eco-friendly products and its cost-effectiveness would be beneficial to suggest appropriate mitigation strategy for such compounds.

Assessment of algal biomass towards removal of Cr(VI) from tannery effluent: a sustainable approach

The current investigation focuses on a systematic study of application of two dried algal biomass (i.e., Nostoc sp. and Turbinaria vulgaris) in removal of Cr(VI) from synthetic solution as well as tannery industrial wastewater. The optimized conditions for Cr(VI) removal are nearly same for the both the biosorbents (i.e., pH 2.8, initial Cr(VI) concentration 100 mg L^-1, biomass dosage of 1.2g L^-1, contact time 120 and 110 min). Nostoc sp. (q_max=23.94mg g^-1) was observed to possess a superior removal capability when compared to Turbinaria vulgaris (q_max=21.8mg g^-1). Desorption studies were performed with four different desorbing agents. Application study was conducted using tannery wastewater with Nostoc sp. and 94.20% removal of Cr(VI) was obtained. Hence, this study revealed that Nostoc sp. and T. vulgaris both have great potential to be an environment friendly and economic biosorbent for removal of Cr(VI) containing industrial effluent.

Removal of copper ions from alembic cachaça using agro-industrial residues as biosorbents

Cachaça is a typical Brazilian distilled beverage made from fermented sugarcane juice. The copper levels in alembic cachaça are of great concern among producers, and the removal of this contaminant is important for the quality of the product. The present study aimed to remove copper ions from alembic cachaça by adsorption. Sugarcane bagasse, okara, Moringa oleifera Lam., three different types of zeolites, and two types of commercial charcoal were tested as biosorbents. The heat-treated sugarcane bagasse removed 100% of the copper present in a cachaça sample, while other low-cost natural adsorbents had close to 50% removal as was observed for M. oleifera seeds and okara. All adsorbents had porous and fibrous structures, favorable to adsorption. A kinetic study showed that a pseudo-second-order model was appropriate, with equilibrium times of 15 h for heat-treated sugarcane bagasse, okara, and M. oleifera seeds used as adsorbents. The Langmuir model better fitted the experimental data, indicating monolayer adsorption. The maximum adsorption capacity was 17.00, 0.77, and 5.33 mg of Cu g^-1 for the heat-treated sugarcane bagasse, M. oleifera seeds, and okara, respectively. The results presented here are promising indicating three agro-industrial residues were favorable to the adsorption of copper ions from alembic cachaça.

A Novel Approach for the Biological Desalination of Major Anions in Seawater Using Three Microalgal Species: A Kinetic Study

The global water shortage alert has been upgraded to a higher risk level. Consequently, a sustainable approach for ecofriendly, energy efficient water desalination is required for agricultural and municipal water reuse. In this study, an energy-efficient biological desalination process was used to treat chloride anions, which are the most abundant anion salt in seawater. Three algal species were studied: Scenedismus arcuatusa (S. arcuatusa), Chlorella vulgaris (C. vulgaris), and Spirulina maxima (Sp. maxima), under different operating conditions (saline concentrations, contact time, high light intensity, and CO2 supply), and two kinetic models were used. It was identified that under a high light intensity and CO2 supply, S. arcuatusa enhanced chloride removal from 32.42 to 48.93%; the daily bioaccumulation capacity (Qe), according to the kinetic models, was enhanced from 124 to 210 mg/g/day; and the net biomass production was enhanced from 0.02 to 0.740 g/L. The EDX analysis proved that salt bioaccumulation may be attributed to the replacement of Ca2+ and Mg2+ with Na+ and K+ through algal cells. The study’s findings provide promising data that can be used in the search for novel energy-efficient alternative ecofriendly desalination technologies based on algae biological systems with biomass byproducts that can be reused in a variety of ways.

Manufacturing of macroporous cellulose monolith from green macroalgae and its application for wastewater treatment

Enormous interest in using marine biomass as a sustainable resource for water treatment has been manifested over the past few decades. Herein, the objective was to investigate the possible use of green macroalgae (Codium tomentosum) for cellulose-based foam production through a versatile and convenient process. Macroporous cellulose monolith was prepared from cellulose hydrogel using freeze-drying process, resulting in a mechanically rigid monolith with a high swelling ratio. The as-produced spongy-like porous cellulosic material was used as bio-sorbent for wastewater treatment, particularly for removing methylene blue (MB) dye from concentrated aqueous solution. The adsorption capacity of MB was subsequently studied, and the effect of adsorption process parameters was determined in a controlled batch system. From the kinetic studies, it was found that the adsorption equilibrium was reached within 660 min. Furthermore, the analysis of the adsorption kinetics reveals that the data could be fitted by a pseudo-second order model, while the adsorption isotherm could be described by Langmuir isotherm model. The maximum adsorption capacity was found to be 454 mg/g. The findings suggested that the produced cellulose monolith could be used as a sustainable adsorbent for water treatment.

Preparation of biosorbent for the removal of organic dyes from aqueous solution via one-step alkaline ball milling of hickory wood

Biosorbent has attracted considerable attention recently for use in environment remediation and pollution control. Here, a simple and efficient method of one-step alkaline ball milling was designed to prepare porous hickory biosorbent without any thermal treatments. The products were characterized for their ability to remove methyl violet (MV) and titan yellow (TY) organic dyes from aqueous solutions. The one-step alkaline ball milled hickory (OABMH) biosorbent exhibited mesoporous microstructure, homogeneous morphology, and a diversity of oxygen-containing functional groups. Furthermore, OABMH could sorb 212.2 mg g^-1 MV and 5.6 mg g^-1 TY polar dyes, respectively, mainly through the surface complexation mechanism. Freundlich adsorption isotherm and intraparticle diffusion kinetic models best described MV adsorption by OABMH biosorbents. The results indicate that one-step alkaline ball milling technique is an efficient and economical approach for converting biomass into advanced biosorbents for environment remediation and water treatment.

Grafting of Acrylic Membrane Prepared from Fibers Waste for Dyes Removal: Methylene Blue and Congo Red

Dyes are a type of pollutant that have been discharged into water streams by various industries and had harmful effects on the environment and human health. Therefore, present work was directed to recycle acrylic fibers waste to be used as an adsorbent to exclude dyes such as methylene blue (MB) and Congo red (CR) from dyes-polluted wastewater. Acrylic fibers waste was converted into membrane followed by chemical grafting with p-phenylenediamine monomer to form functional modified membranes. Afterwards, some characterization analyses; Fourier transform-infrared, scanning electron microscope, swelling behavior, and porosity properties were performed for the acrylic fiber grafted membrane (AFGM). For obtaining the best conditions that permit the highest adsorption capacity of the AFGM, some preliminary experiments followed by general full factorial design experiments were displayed. Langmuir, Freundlich isotherms and kinetic studies evaluations were applied. Results revealed that, the adsorption capacities of the AFGM were 61% for Methylene blue and 86% for Congo red that stated the high affinity of the AFGM to the anionic dyes. The reusability of the AFGM membranes in different cycles for 3Rs processes “Removal, Recovery, and Re-use” indicated the efficiency of the AFGM to be used in wastewater treatment.

Removal of Methylene Blue and Congo Red Using Adsorptive Membrane Impregnated with Dried Ulva fasciata and Sargassum dentifolium

Biosorption is a bioremediation approach for the removal of harmful dyes from industrial effluents using biological materials. This study investigated Methylene blue (M. blue) and Congo red (C. red) biosorption from model aqueous solutions by two marine macro-algae, Ulva fasciata and Sargassum dentifolium, incorporated within acrylic fiber waste to form composite membranes, Acrylic fiber-U. fasciata (AF-U) and Acrylic fiber-S. dentifolium (AF-S), respectively. The adsorption process was designed to more easily achieve the 3R process, i.e., removal, recovery, and reuse. The process of optimization was implemented through one factor at a time (OFAT) experiments, followed by a factorial design experiment to achieve the highest dye removal efficiency. Furthermore, isotherm and kinetics studies were undertaken to determine the reaction nature. FT-IR and SEM analyses were performed to investigate the properties of the membrane. The AF-U membrane showed a significant dye removal efficiency, of 88.9% for 100 ppm M. blue conc. and 79.6% for 50 ppm C. red conc. after 240 min sorption time. AF-S recorded a sorption capacity of 82.1% for 100 ppm M. blue conc. after 30 min sorption time and 85% for 100 ppm C. red conc. after 240 min contact time. The membranes were successfully applied in the 3Rs process, in which it was found that the membranes could be used for five cycles of the removal process with stable efficiency.

Development of biological macroalgae lignins using copper based metal-organic framework for selective adsorption of cationic dye from mixed dyes

The chemical compositions of macroalgae are protein; cholesterol, fatty acid, and lignin which mostly construct from hydroxyl and amine groups. The lignin as a key structure in the tissues of macroalgae was modified using the sulfation pathway. A novel environmental friendly adsorbent Cu-BTC@Algal was synthesized by incorporated Cu-BTC nanoparticles onto sulphated-Macroalgae biomass under solvothermal conditions and characterized by XRD, FTIR, and N₂ adsorption-desorption isotherms. The removal rate of Cu-BTC@Algal was quite greater than that of Cu-BTC, showing that the adsorption performance of porous Cu-BTC can be improved through the modification of algal. Further study revealed that Cu-BTC@Algal exhibited a fast adsorption rate and selective adsorption ability towards the cationic dyes in aqueous solution. The removal rate was up to 97% for cationic dyes methylene blue (MB) and 68% for methyl orange (MO) at intervals 10 min. The influences including initial concentration, and contact time of MB/MO adsorption onto modified algal biomass, Cu-BTC and Cu-BTC@Algal were investigated in detail. The kinetic study indicated that the adsorption of MB/MO onto Cu-BTC@Algal followed the pseudo second-order model. The isotherm obtained from experimental data fitted the Langmuir model, yielding maximum adsorption capacity of 42, 73 and 162 mg g^-1 for algal, Cu-BTC and Cu-BTC@Algal, respectively.

Role of microalgal ligninolytic enzymes in industrial dye decolorization

In this study, the decolorization efficiency of seven microalgae isolates; Nostoc muscorum, Nostoc humifusum, Spirulina platensis, Anabaena oryzae, Wollea saccata, Oscillatoria sp. and Chlorella vulgaris was investigated for dye decolorization. The highest decolorization percentages of Brazilwood, Orange G, and Naphthol Green B dyes (99.5%, 99.5%, and 98.5%, respectively) were achieved by Chlorella vulgaris. However, the maximum efficiency for dye decolorization percentages of CV and malachite green dyes were exhibited by A. oryzae (97.4%) and W. saccata (93.3%). Ligninolytic enzymes activity assay was carried out for laccase and lignin peroxidase enzymes, which revealed a high efficiency of the C. vulgaris, A. oryzae and W. saccata to lignin containing compound degradation. The highest laccase production recorded by C. vulgaris with Brazilwood, Orange G, and Naphthol Green B dyes (665.0, 678.6, and 659.5 U/ml, respectively). Similarly, C. vulgaris gave a high lignin peroxidase enzyme production with the above three dyes respectively (306.00, 298.34, and 311.45 U/ml). In addition, A. oryzae and W. saccata showed the highest production of the laccase enzyme (634.6 and 577.45 U/ml, respectively) with CV and malachite green dyes. The degradation products have been characterized after decolorization and verified using FTIR analysis. The high decolorization percentages achieved by C. vulgaris, A. oryzae and W. saccata make them potential candidates for bioremediation and pre-processing to remove dyes from textile effluents.