The effects of fatty acids chain length on the techno-functional properties of basil seed gum-based edible films

Fatty-acid incorporation improves hydrophobicity of pea protein based films towards better oxygen/water barrier properties and fruit protecting ability

The current study was undertaken to synthesize pea protein based films containing fatty acids with various chain lengths. Films namely PFAF1, PFAF2, and PFAF3 were fabricated in the presence of pelargonic acid, margaric acid, and pentacosanoic acid, respectively. Also, negative (PF: film formulated using protein alone) and positive control (PCF: film formulated using mixture of protein and chitosan) control were prepared. Interactions occurring within films were clarified by FTIR. Moreover, morphology and thermal behavior of samples were evaluated by SEM and TGA. Variations in thickness (PF: 0.03 mm, PFAF1: 0.03 mm, PFAF2: 0.04 mm, PFAF3: 0.04 mm, PCF: 0.06 mm) and water content (PF: 28.85 %, PFAF1: 16.20 %, PFAF2: 14.51 %, PFAF3: 12.04 %, PCF: 13.83) were obvious. Superior opacity was identified in PCF, followed by PFAF3, PFAF2, PFAF1, and PF. PFAF3 together with PCF were more successful than others in reducing/protecting oxygen and water permeation. Adding fatty acid or chitosan to protein films led to the decline in tensile strength (TS) and increment in elongation at break (E). As for preservation performances, maximum limitations against shifts in weight and color of bananas during 7-day storage were provided by PFAF3. Also, except for PF, all coatings (especially PFAF3) postponed the rotting of fruits.

A novel biopolymeric composite edible film based on sunnhemp protein isolate and potato starch incorporated with clove oil: Fabrication, characterization, and amino acid composition

Composite edible films were developed by casting method using sunnhemp protein isolate (SHPI) and potato starch (PS) at various proportions (100:0, 90:10, 80:20; 70:30, 60:40, and 50:50) containing glycerol as a plasticizer and clove oil. All the edible films were evaluated for thickness, moisture content, solubility, swelling ratio, water activity. Further characterization of edible films was done on the basis of mechanical, optical, thermal and structural attributes along with morphology. Among all the films, composite film containing 50 % SHPI, 50 % PS and 1 % clove oil were having better characteristics. The solubility and WVP decreased, while the tensile strength and elongation at break of composite film increased with the inclusion of potato starch and clove oil. Intermolecular interactions in the composite film matrix were confirmed by FTIR and XRD analysis. SEM images confirmed the structural compactness and integrity of all the developed films. The amino acid composition of edible films indicated presence of most of the essential amino acids. The present finding of this research work shows that the utilization of sunnhemp protein in the development of biocomposite edible films represents an alternative opportunity of sustainable edible food packaging.

The recent progress in the research of extraction and functional applications of basil seed gum

Basil seed gum (BSG) is a new hydrophilic colloid of natural plant origin. Extracted from basil seeds, it possesses excellent functional characteristics in terms of emulsification, rheology, gelation, stability, and adsorption, which are just as favorable as those of certain commercial gums. Besides, BSG has been widely used in food, medicine, industry, and many other fields for its physiological functions of weight reduction, detoxification, and control of blood sugar and cholesterol as a good dietary fiber. In this paper, we analyzed and discussed the extraction procedures, composition structures, functional characteristics, and modification strategies of BSG. In addition, we summarized the latest research on the applications of BSG in different industries to provide theoretical references for the high-value processing and utilization of BSG.

Use of fenugreek seed gum in edible film formation: major drawbacks and applicable methods to overcome

Researching on potential biopolymer sources with the aim of developing edible films with better mechanical and barrier properties has become innovative as it would be a key factor to minimize the use of synthetic polymers in food packaging. Therefore, different biopolymers such as galactomannan have been gaining attention recently. Fenugreek seed gum is a rich source of galactomannan which is minimally researched on its applicability in edible film making. The degree of galactose substitution and polymerization are the main factors that determine the functional properties of galactomannan. A strong and cohesive film matrix cannot be produced from fenugreek seed gum as its molecular interaction is weakened due to the high galactose substitution with a high galactose/mannose ratio, 1:1. Structural modifications of galactomannan in fenugreek seed gum will lead to films with the required mechanical properties. Hence, this review summarizes recent scientific studies on the limitations of fenugreek seed gum as a film forming agent and the specific modification techniques that can be applied in order to increase its film forming capability and performance.

Replacement of polyethylene oxide by peach gum to produce an active film using Litsea cubeba essential oil and its application in beef

This study evaluated the effects of adding various concentrations (0 %, 1 %, 2 %, and 3 %) of peach gum (PG) to films made from polyethylene oxide (PEO) combined with Litsea cubeba essential oil (LCEO) to be utilized as active packaging for food in the future. The findings showed that the film containing PG 2 % concentration had the best physic-mechanical properties. In films made with PG, the glass transition temperature was significantly improved. Combining PG and PEO resulted in films that were brighter in color, had lower WVP values, and had the lowest water activity. Furthermore, XRD demonstrated that PG additions were compatible with the film of PEO blended with LCEO. The PG films formulated with PG presented high antioxidant and antibacterial activity against Staphylococcus aureus and E. coli. Wrapping beef with P2G2 film led to maintaining its quality with suitable levels of pH, TBARS, and TVB-N. This also decreased the number of E. coli and S. aureus in beef throughout the storage period. The results indicate that adding PG to PEO films enhances their suitability for food preservation.

Investigating functional properties of halloysite nanotubes and propolis used in reinforced composite film based on soy protein/basil seed gum for food packaging application

This study aimed to investigate the effect of halloysite nanotubes (HNTs) on the physicochemical characteristics of the soy protein isolated/basil seed gum (SPI/BSG) film activated with propolis (PP). The obtained results of scanning electron microscope (SEM), thermal gravimetric analysis (TGA), and tensile investigations illustrated that the addition of HNTs as nanofiller led to positive changes in the morphology, thermal stability, and mechanical characteristics of SPI/BSG films. The barrier properties of films considerably decreased with incorporation of HNTs. Furthermore, the encapsulation of PP as bioactive agent into the produced films significantly increased (P < 0.05) the antioxidant potential of the samples in DPPH radical-scavenging activity assays. The antibacterial effects of film also significantly increased (P < 0.05) after the encapsulation of PP. In conclusion, the produced films illustrated acceptable efficiency for usage in food packaging system.

Biodegradable edible film based on basil seed gum: the effect of gum and plasticizer concentrations.. [DOI: 10.21203/rs.3.rs-2626369/v1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

In this research, edible films produced from basil seed gum (BSG) with 3 different gum (0.5%, 1%, 1.5%) and plasticizer concentrations (1%, 3%, 5%) were developed, and the physical, thermal, barrier and microstructural properties of these films were measured. As a result of XRD, AFM, DSC, and FT-IR spectroscopy analyses, it was concluded that the mechanical and barrier properties and thermal stability of BSG-based films are quite good. The increase in gum and glycerol concentrations increased the crystallinity also strengthened the mechanical and barrier properties of the film. Also, films with low gum and high glycerol ratio have almost smooth surfaces and appropriate transparency for packaging applications. As the glycerol and BSG concentration increased, WVP values of the films increased. The complete dissolution of this film in the soil within 60 days, even at the highest gum concentration, showed that this material could be considered eco-friendly packaging. For this reason, it is thought that BSG-based films and coatings with suitable gum and plasticizer concentrations can be a potential packaging material for foods since they can be obtained at low cost, have a very good barrier, thermal and structural properties, and are edible and biodegradable.

Latest Trends in Sustainable Polymeric Food Packaging Films

Food packaging is the best way to protect food while it moves along the entire supply chain to the consumer. However, conventional food packaging poses some problems related to food wastage and excessive plastic production. Considering this, the aim of this work was to examine recent findings related to bio-based alternative food packaging films by means of conventional methodologies and additive manufacturing technologies, such as 3D printing (3D-P), with potential to replace conventional petroleum-based food packaging. Based on the findings, progress in the development of bio-based packaging films, biopolymer-based feedstocks for 3D-P, and innovative food packaging materials produced by this technology was identified. However, the lack of studies suggests that 3D-P has not been well-explored in this field. Nonetheless, it is probable that in the future this technology will be more widely employed in the food packaging field, which could lead to a reduction in plastic production as well as safer food consumption.

Atmospheric Pressure Cold Plasma Modification of Basil Seed Gum for Fabrication of Edible Film Incorporated with Nanophytosomes of Vitamin D3 and Tannic Acid

The purpose of this work was to first investigate the impact of cold plasma (CP) treatment, performed at various times (0-30 min), on the characteristics of basil seed gum (BSG), as well as the fabrication of functional edible films with the modified BSG. FT-IR spectra of CP-treated BSG revealed change at 1596 and 1718 cm^-1, indicating the formation of carbonyl groups. Both untreated and CP-modified BSG dispersions showed shear-thinning behavior with a higher apparent viscosity for the CP-modified dispersions at studied temperatures. Untreated BSG dispersion and the one treated by CP for 10 min revealed time-independent behavior, while those treated for 20 and 30 min showed a rheopectic behavior. CP-modified BSG dispersion had higher G', G″, and complex viscosity than untreated BSG. Higher contact angle for the CP-modified BSG suggested enhanced hydrophobic nature, while the surface tension was lower compared to the untreated BSG. SEM micrographs revealed an increase in the surface roughness of treated samples. Moreover, modified BSG was successfully used for the preparation of edible film incorporating tannic acid and vitamin D₃-loaded nanophytosomes with high stability during storage compared to the free form addition. The stability of encapsulated forms of vitamin D₃ and tannic acid was 39.77% and 38.91%, more than that of free forms, respectively. In conclusion, CP is an appropriate technique for modifying the properties of BSG and fabrication of functional edible films.

Sustainable Coating Paperboard Packaging Material Based on Chitosan, Palmitic Acid, and Activated Carbon: Water Vapor and Fat Barrier Performance

Synthetic polymer coatings impact the biodegradable behavior of cellulosic packaging material. The environmental consequences of food packaging disposal have increased consumer concern. The present study aimed to use natural polymer coatings incorporating palmitic acid and activated carbon applied to paperboard surfaces as a sustainable alternative to improve cellulosic packaging material's moisture and fat barrier properties, minimizing the environmental impact. The coating formulation was defined using a Factorial Experimental Design with independent variables: chitosan, palmitic acid, activated carbon concentrations, and the number of coating layers. The highest concentration of chitosan (2.0% w/w) filled the pores of the cellulosic paperboard network, supporting the compounds incorporated into the filmogenic matrix and improving the fat resistance. The water vapor permeability of the coated paperboard material (range: 101 ± 43 to 221 ± 13 g·d^-1·m^-2) was influenced by the hydrophobicity effect of palmitic acid, the non-polar characteristic of activated carbon, and the number of applied layers. The coating formulation selected was a chitosan concentration of 2.0% (w/w), a palmitic acid concentration of 1.8% (w/w), an activated carbon concentration of 1.2% (w/w), and an application of three layers. The coating provides the potential for a paperboard surface application, improving the cellulosic packaging material's fat and moisture barrier properties and maintaining biodegradability and recyclability.

Characterization and antibacterial behavior of an edible konjac glucomannan/soluble black tea powder hybrid film with ultraviolet absorption

In this study, a KGM/SBTP film was prepared by a blending method using KGM and a soluble black tea film (SBTP) as substrates, and its hygroscopicity, thermal properties, light barrier properties, microstructure, and bacteriostatic properties were evaluated. The results confirmed that compared with the control group, with the increase in the SBTP content, the transmittance of the film in the ultraviolet region significantly reduced, and the water barrier property and thermal stability were improved. Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) results indicated that the tea polyphenols interacted with the film substrate. SEM also showed that the structure of the KGM/SBTP films was smooth and flat, and all samples showed no fracture. In addition, the KGM/SBTP mixed membrane had obvious concentration-dependent antibacterial activity. When the concentration of SBTP was 0.9%, the inhibition zones against Staphylococcus aureus and Escherichia coli were 12.30 ± 0.20 mm and 12.05 ± 0.47 mm, respectively.

Influence of Ulluco Starch Concentration on the Physicochemical Properties of Starch-Chitosan Biocomposite Films

This work aimed to prepare ulluco starch (US)/chitosan (Ch) edible films and evaluate the effect of the concentration of US on their physicochemical properties. The use of edible films is a means of adding value to the ulluco crop and evaluating the viability of using new sources to produce packaging materials. Different samples were prepared at different US concentrations (2%, 3%, 4%, and 5% w/v) and a fixed chitosan concentration (1.5% w/v); then, samples were analyzed, considering their physical, mechanical, and thermal properties. The US/Ch edible films showed an increase in solubility from 17.5% to 21.7%, swelling power (SP) from 38.9% to 267%, tensile strength (TS) from 3.69 MPa to 10.7 MPa, Young modulus (YM) from 18.0 Pa to 652 Pa, and thermal stability as the US concentration increased. However, samples with low US concentrations showed higher elongation at break (EB) (36.6%) and better barrier properties (WVP) (5.61 × 10⁻¹¹ g/m s Pa). The films evaluated in this work presented good physical, mechanical, and barrier properties, revealing their potential as packaging material ensuring food security, and demonstrating the technological potential of US.

Application in situ of biodegradable films produced with starch, citric pectin and functionalized with feijoa (Acca sellowiana (Berg) Burret) extracts: An effective proposal for food conservation

In this study, biodegradable films produced with starch, citric pectin, and functionalized with antioxidant compounds from feijoa (Acca sellowiana (Berg) Burret) were in situ applied for the conservation of ground beef, bread, and grapes. The results demonstrated that the films produced were an excellent source of stable antioxidant compounds, with antimicrobial activity against Escherichia coli, Salmonella, and Shigella. The bioactive films based on biological macromolecules positively stabilized the polyunsaturated fatty acids and deterioration reactions in ground beef. The release of bioactive compounds from the films was responsible for inhibiting molds and yeasts in bread, increasing their shelf life for 30 days of storage. The application of film coating and packaging in grapes increased postharvest conservation and maintained steady physicochemical characteristics. Therefore, the innovative films produced can release bioactive compounds with antioxidant and antimicrobial activity, and consequently, can be proposed as an effective material for food conservation, increasing the shelf life of perishable food products.

Incorporation of high fructose corn syrup with different fructose levels into biscuit: An assessment of physicochemical and textural properties

This study examined the effects of different concentrations of high-fructose corn syrup (HFCS, 28%, 44%, 55%) used in biscuit formulation on the hydroxymethyl furfural (HMF) acrylamide content, and textural properties were investigated and compared with invert sugar and sucrose-incorporated samples. No significant difference in the chemical composition (moisture, fat, protein, and ash) among different samples was noted based on the results. The highest L* was associated with a control sample containing sugar and invert sugar, although an increase in F55 content decreased the L* value significantly (p < .05). The highest hardness value was correlated with control samples (6.5 N), although the sample with 12.5% F42 and 25% F55 demonstrated lower hardness 6.27 N, and the lowest hardness value (3.97 N) was related to the sample containing 12.5% F42 and 25% F28. The amounts of water activity of all samples were in the range of 0.22 to 0.29, with the highest amount related to the control sample. The SEM images showed a uniform surface with several holes for all the biscuits. The highest and lowest (HMF) levels were related to the samples containing 25% F55 (46.04) and 12.5% F42 with 2.36 ppm. The control sample with the acrylamide amount of 28.50 ppb and the sample containing 12.5% F42 and 25% F55 with the acrylamide amount of 27.33 ppb showed the highest acrylamide content.

Recent advances in the application of microalgae and its derivatives for preservation, quality improvement, and shelf-life extension of seafood

Seafood is a highly perishable food product due to microbiological, chemical, and enzymatic reactions, which are the principal causes of their rapid quality deterioration. Therefore, ever-increasing consumers' demand for high-quality seafood along with a negative perception of synthetic preservatives creates opportunities for natural preservatives such as microalgae extracts. They are potential alternatives to reduce microbial growth, increase oxidative stability, and protect the sensorial properties of seafood. Research has shown that the inclusion of microalgae extracts into the aquatic animal's diet could enhance their meat quality and increase production. This review focuses on the direct application of various microalgae extracts as seafood preservative, and their functional properties in seafood, such as antioxidant and antimicrobial activities. Besides, the potential nutritional application of microalgae extracts as an alternative in aqua-feed and their impact on seafood quality (indirect application) are also presented. The safety aspects and regulatory issues of products from microalgae are highlighted.

Characterization of Novel Edible Films and Coatings for Food Preservation Based on Gum Cordia

As a pharmaceutical component, gum Cordia has been applied to improve crop resistance against many diseases. A large amount of gum appears around the fruit after soaking in an aqueous system. The mucilage possesses outstanding technofunctional properties as an emulsifier, thickening agent, and binding and stabilizing component in food and drug industries. The backbone of gum Cordia is composed of (1-2)-linked L-arabinofuranosyl and (1–6)-linked D-glucopyranosyl residues. This manuscript reviews the technofunctional properties and applications of gum Cordia in food systems. Particularly, our focus has been given to its application as a natural source for the formation of edible films and coatings for increasing the shelf life of food products and for the food preservation as a potential ingredient in formulation. The future research perspectives are also highlighted.