The effects of chemical crosslinking manners on the physical properties and biocompatibility of collagen type I/hyaluronic acid composite hydrogels

Collagen-based hydrogels induce stem cell chondrogenesis and hyaline cartilage regeneration: an in vivo study

Injectable, self-crosslinking collagen-based hydrogels are beneficial for chondrocytes to secrete matrix, positioning them as promising candidates for cartilage tissue engineering. However, previous studies lacked insight into the ability of cell-free collagen-based hydrogels to regenerate hyaline cartilage defect. Therefore, this study aimed to evaluate the potential of collagen-based hydrogels (Col and ColHA) to induce chondrogenic differentiation of stem cells and in situ hyaline cartilage regeneration. Both Col and ColHA hydrogels self-crosslinked in situ and exhibited similar physical properties. In vitro experiments showed they supported the survival, adhesion, spreading, and proliferation of bone marrow stem cells (BMSCs). Moreover, both hydrogels induced ectopic differentiation of BMSCs into chondrocytes when implanted subcutaneously into the back of nude mice. ColHA hydrogel notably enhanced type II collagen secretion. The results of repairing cartilage defects in situ revealed both hydrogels facilitated hyaline cartilage regeneration and maintained cartilage phenotype without exogenous BMSCs. Hydrogels encapsulating BMSCs expedited cartilage repair, and ColHA/BMSC constructs showed better mechanical properties, suggesting their potential for cartilage repair applications. This study implies that collagen-based hydrogels are good candidates for hyaline cartilage regeneration.

Active Media Perfusion in Bioprinted Highly Concentrated Collagen Bioink Enhances the Viability of Cell Culture and Substrate Remodeling

The bioprinting of high-concentrated collagen bioinks is a promising technology for tissue engineering and regenerative medicine. Collagen is a widely used biomaterial for bioprinting because of its natural abundance in the extracellular matrix of many tissues and its biocompatibility. High-concentrated collagen hydrogels have shown great potential in tissue engineering due to their favorable mechanical and structural properties. However, achieving high cell proliferation rates within these hydrogels remains a challenge. In static cultivation, the volume of the culture medium is changed once every few days. Thus, perfect perfusion is not achieved due to the relative increase in metabolic concentration and no medium flow. Therefore, in our work, we developed a culture system in which printed collagen bioinks (collagen concentration in hydrogels of 20 and 30 mg/mL with a final concentration of 10 and 15 mg/mL in bioink) where samples flow freely in the culture medium, thus enhancing the elimination of nutrients and metabolites of cells. Cell viability, morphology, and metabolic activity (MTT tests) were analyzed on collagen hydrogels with a collagen concentration of 20 and 30 mg/mL in static culture groups without medium exchange and with active medium perfusion; the influence of pure growth culture medium and smooth muscle cells differentiation medium was next investigated. Collagen isolated from porcine skins was used; every batch was titrated to optimize the pH of the resulting collagen to minimize the difference in production batches and, therefore, the results. Active medium perfusion significantly improved cell viability and activity in the high-concentrated gel, which, to date, is the most limiting factor for using these hydrogels. In addition, based on SEM images and geometry analysis, the cells remodel collagen material to their extracellular matrix.

Enhancing the Repair of Substantial Volumetric Muscle Loss by Creating Different Levels of Blood Vessel Networks Using Pre-Vascularized Nerve Hydrogel Implants

Volumetric muscle loss (VML), a severe muscle tissue loss from trauma or surgery, results in scarring, limited regeneration, and significant fibrosis, leading to lasting reductions in muscle mass and function. A promising approach for VML recovery involves restoring vascular and neural networks at the injury site, a process not extensively studied yet. Collagen hydrogels have been investigated as scaffolds for blood vessel formation due to their biocompatibility, but reconstructing blood vessels and guiding innervation at the injury site is still difficult. In this study, collagen hydrogels with varied densities of vessel-forming cells are implanted subcutaneously in mice, generating pre-vascularized hydrogels with diverse vessel densities (0-145 numbers/mm2) within a week. These hydrogels, after being transplanted into muscle injury sites, are assessed for muscle repair capabilities. Results showed that hydrogels with high microvessel densities, filling the wound area, effectively reconnected with host vasculature and neural networks, promoting neovascularization and muscle integration, and addressing about 63% of the VML.

Engineered stem cells by emerging biomedical stratagems

Stem cell therapy holds immense potential as a viable treatment for a widespread range of intractable disorders. As the safety of stem cell transplantation having been demonstrated in numerous clinical trials, various kinds of stem cells are currently utilized in medical applications. Despite the achievements, the therapeutic benefits of stem cells for diseases are limited, and the data of clinical researches are unstable. To optimize tthe effectiveness of stem cells, engineering approaches have been developed to enhance their inherent abilities and impart them with new functionalities, paving the way for the next generation of stem cell therapies. This review offers a detailed analysis of engineered stem cells, including their clinical applications and potential for future development. We begin by briefly introducing the recent advances in the production of stem cells (induced pluripotent stem cells (iPSCs), embryonic stem cells (ESCs), mesenchymal stem cells (MSCs) and hematopoietic stem cells (HSCs)). Furthermore, we present the latest developments of engineered strategies in stem cells, including engineered methods in molecular biology and biomaterial fields, and their application in biomedical research. Finally, we summarize the current obstacles and suggest future prospects for engineered stem cells in clinical translations and biomedical applications.

3D printed scaffolds based on hyaluronic acid bioinks for tissue engineering: a review

Hyaluronic acid (HA) is widely distributed in human connective tissue, and its unique biological and physicochemical properties and ability to facilitate biological structure repair make it a promising candidate for three-dimensional (3D) bioprinting in the field of tissue regeneration and biomedical engineering. Moreover, HA is an ideal raw material for bioinks in tissue engineering because of its histocompatibility, non-immunogenicity, biodegradability, anti-inflammatory properties, anti-angiogenic properties, and modifiability. Tissue engineering is a multidisciplinary field focusing on in vitro reconstructions of mammalian tissues, such as cartilage tissue engineering, neural tissue engineering, skin tissue engineering, and other areas that require further clinical applications. In this review, we first describe the modification methods, cross-linking methods, and bioprinting strategies for HA and its derivatives as bioinks and then critically discuss the strengths, shortcomings, and feasibility of each method. Subsequently, we reviewed the practical clinical applications and outcomes of HA bioink in 3D bioprinting. Finally, we describe the challenges and opportunities in the development of HA bioink to provide further research references and insights.

Collagen-Based Hydrogels for Cartilage Regeneration

Cartilage regeneration remains difficult due to a lack of blood vessels. Degradation of the extracellular matrix (ECM) causes cartilage defects, and the ECM provides the natural environment and nutrition for cartilage regeneration. Until now, collagen hydrogels are considered to be excellent material for cartilage regeneration due to the similar structure to ECM and good biocompatibility. However, collagen hydrogels also have several drawbacks, such as low mechanical strength, limited ability to induce stem cell differentiation, and rapid degradation. Thus, there is a demanding need to optimize collagen hydrogels for cartilage regeneration. In this review, we will first briefly introduce the structure of articular cartilage and cartilage defect classification and collagen, then provide an overview of the progress made in research on collagen hydrogels with chondrocytes or stem cells, comprehensively expound the research progress and clinical applications of collagen-based hydrogels that integrate inorganic or organic materials, and finally present challenges for further clinical translation.

Tunable Stress Relaxing Biomimetic Matrices: Hyaluronan/Hydroxyapatite Hybridization Mediates Assembly of Collagen Fibrils

The alluring correlations of cellular behaviors with viscoelastic extracellular matrices have driven increasing endeavors directed toward the understanding of mechanical cues on cell growth and differentiation via preparing biomimetic scaffolds/gels with viscoelastic controllability. Indeed, systematic investigations, especially into calcium phosphate-containing biomimetics, are relatively rare. Here, oxidized hyaluronic acid/hydroxyapatite hybrids (OHAHs) were synthesized by hyaluronan-mediated biomimetic mineralization with confined ion diffusion and subsequent oxidization treatment. The collagen self-assembly was applied to fabricate tunable stress relaxing fibrillar matrices in the presence of OHAHs in which the incorporated hyaluronic acid with aldehyde groups acted to improve the component compatibility as well as to supplement the molecular interactions with the occurrence of a Schiff-base reaction. With the addition of varying OHAH contents, the self-assembly behavior of collagen was altered, and the obtained collagen-hybrid (CH) matrices presented a heterogeneous fibrillar structure interspersed with OHAHs, characterized by large fibrillar bundles coexisting with small fibrils. The OHAHs improved the hydrogel stability of pure collagen, and according to rheological and nanoindentation measurements, CH matrices also exhibited tunable stress relaxation rates, following an OHAH concentration-dependent fashion. The proliferation and spreading of MC3T3-E1 cells cultured onto such CH matrices were further found to increase with the stress relaxing rate of the matrices. The present study showed that the introduction of hydroxyapatite incorporated with active hyaluronic acid during collagen reconstitution was a simple and effective strategy to realize the preparation of tunable stress relaxing biomimetic matrices potentially used for further appraising the regulation of mechanical cues on cell behaviors.

Components and physical properties of hydrogels modulate inflammatory response and cartilage repair

Collagen and hyaluronic acid are commonly applied in cartilage tissue engineering, yet there has been limited investigation into their inflammatory response, a crucial factor in articular cartilage repair. This study aimed to evaluate the impact of components and physical properties of hydrogels on inflammatory response and cartilage repair. Three kinds of hydrogels with comparable storage moduli at low frequencies were designed and fabricated, namely, methacrylic anhydride-modified hyaluronic acid hydrogel (HAMA), methacrylic anhydride-modified type I collagen hydrogel (CMA) and unmodified type I collagen hydrogel (Col). HAMA hydrogel was unfavorable for adhesion and spreading of BMSCs. Furthermore, HAMA hydrogel stimulated rapid migration and pro-inflammatory M1 polarization of macrophages, leading to persistent and intense inflammation, which was unfavorable for cartilage repair. CMA and Col hydrogels possessed the same component and facilitated the adhesion, spreading and proliferation of BMSCs. Compared with CMA hydrogel, Col hydrogel induced rapid migration and moderate M1 polarization of macrophages at the early stage of injury, which was mainly influenced by its fast dissolution rate, small pore size fiber network structure and rapid stress relaxation. In addition, the phenotype of macrophages timely transformed into anti-inflammatory M2 due to the properties of the collagen component, which shortened the duration of inflammation and enhanced cartilage repair. The results indicated that moderate macrophage activation adjusted by hydrogel components and physical properties was critical in modulating inflammation and cartilage regeneration.

Tissue engineering modalities in skeletal muscles: focus on angiogenesis and immunomodulation properties

Muscular diseases and injuries are challenging issues in human medicine, resulting in physical disability. The advent of tissue engineering approaches has paved the way for the restoration and regeneration of injured muscle tissues along with available conventional therapies. Despite recent advances in the fabrication, synthesis, and application of hydrogels in terms of muscle tissue, there is a long way to find appropriate hydrogel types in patients with congenital and/or acquired musculoskeletal injuries. Regarding specific muscular tissue microenvironments, the applied hydrogels should provide a suitable platform for the activation of endogenous reparative mechanisms and concurrently deliver transplanting cells and therapeutics into the injured sites. Here, we aimed to highlight recent advances in muscle tissue engineering with a focus on recent strategies related to the regulation of vascularization and immune system response at the site of injury.

Mineralization promotion and protection effect of carboxymethyl chitosan biomodification in biomimetic mineralization

Biomimetic mineralization emphasizes reversing the process of dental caries through bio-inspired strategies, in which mineralization promotion and collagen protection are equally important. In this study, carboxymethyl chitosan (CMC) was deemed as an analog of glycosaminoglycan for biomimetic modification of collagen, both of the mineralization facilitation and collagen protection effect were evaluated. Experiments were carried out simultaneously on two-dimensional monolayer reconstituted collagen model, three-dimensional reconstituted collagen model and demineralized dentin model. In three models, CMC was successfully cross-linked onto collagen utilizing biocompatible 1-Ethyl-3(3-dimethylaminopropyl) carbodiimide hydrochloride and N-hydroxy sulfosuccinimide sodium salt to achieve biomodification. Results showed that CMC biomodification increased collagen's hydrophilicity, calcium absorption capacity and thermal degradation resistance. In demineralized dentin model, the activity of endogenous matrix metalloproteinases was significantly inhibited by CMC biomodification. Furthermore, CMC biomodification significantly improved cross-linking and intrafibrillar mineralization of collagen, especially in the two-dimensional monolayer reconstituted collagen model. This study provided a biomimetic mineralization strategy with comprehensive consideration of collagen protection, and enriched the application of chitosan-based materials in dentistry.

Dual drug-loaded hydrogels with pH-responsive and antibacterial activity for skin wound dressing

Antibacterial and hemostatic properties are essential for wound healing dressing. In this study, a new type of hydrogel composed of gelatin methacryloyl (GelMA) and hyaluronic acid-aldehyde (HA-CHO) is fabricated by photo-crosslinking and respectively loaded with a single drug gentamicin sulfate (GS), and two drugs of GS and lysozyme (LZM). The composite hydrogel of GelMA and HA-CHO is successfully synthesized by the aldehyde and Schiff base reactions. The structures and compositions of the hydrogels with and without drug loaded are characterized by FT-IR, ¹H NMR, and XPS. Furthermore, the microstructure and swelling behaviour of hydrogels prove that the content of HA-CHO has a significant role in the formation of hydrogels with dense porous structures and super absorbent. pH 7.4 and pH 5.0 conditions are used to evaluate the drug release behaviour of the obtained hydrogels. The released amount of GS of the drug-loaded hydrogels in the acidic buffer is more than that of the physiological environment because of the cleaved Schiff base bonds and the electrostatic interaction. Especially for the dual drug-loaded hydrogel GelMA/HA-CHO/GS/LZM, the released ratio of GS is elevated from 59 % in pH 7.4 buffer to about 78 % in pH 5.0 buffer within the first 6 h, which verifies the excellent pH-stimulus responsiveness. These endow the GS-LZM dual drug-loaded hydrogels with superior antibacterial efficiencies to that of the single GS drug-loaded hydrogels, no drug-loaded hydrogels, and SEBS control, especially in inhibiting S. aureus in a lower concentration of 10⁶ CFU mL^-1, which can be attributed to the synergistic effect of LZM and GS. For S. aureus at 10⁶ CFU mL^-1, the bacterial survival of GelMA/HA-CHO/GS/LZM is 1.1 %, which shows outstanding antibacterial effect. Hence, the drug-loaded hydrogels, especially the dual drug-loaded hydrogels with pH-responsive, antibacterial, and hemostatic properties have great potential as wound healing materials.

The synergistic regulation of chondrogenesis by collagen-based hydrogels and cell co-culture

The suitable seeding cells and scaffolds are very important for tissue engineering to create functional cartilage. Although the physicochemical properties of scaffold and co-culture system of mesenchymal stem cells (MSCs) and chondrocytes could affect functional properties of engineered cartilage tissues respectively, the combined effects of them on chondrogenesis is currently unknown. Herein, methacrylated collagen (CMA30 and CMA80) hydrogels with different degradation rate and stiffness were prepared. The MSCs and chondrocytes were co-cultured or monocultured in collagen, CMA30 and CMA80 hydrogels in vitro or in vivo. The results demonstrated that cell spreading and proliferation was regulated by degradation rate and stiffness of hydrogels. Compared to single MSCs culture, co-culture cells in all collagen-based hydrogels significantly improved chondrogenesis. CMA30 hydrogel with moderate degradation rate and low storage modulus was the most effective for co-culture system to promote chondrogenesis compared to Col and CMA80 hydrogel in vitro culture, while there was no obvious difference between CMA30 and CMA80 hydrogel in vivo. Furthermore, the intercellular substance exchange was very important for co-culture system to maintain the positive effect on chondrogenesis. Overall, the current study highlights the synergistic effects of the physicochemical properties of collagen-based hydrogel and co-culture system on cartilage formation. STATEMENT OF SIGNIFICANCE: Scaffolds and cells play a key role in cartilage tissue engineering. The combined effects of physicochemical properties of collagen hydrogels and co-culture system (MSCs and chondrocytes) on chondrogenesis is unknown. In contrast to the studies that investigated the effect of single factor (scaffolds or cells) on cartilage formation, this manuscript explored the synergistic regulation of both scaffold properties and biological factors on chondrogenesis, and provided a promising strategy for cartilage tissue engineering.

Molecular dynamics simulation of hyaluronic acid hydrogels: Effect of water content on mechanical and tribological properties

BACKGROUND AND OBJECTIVE

Recently conducted biomedical studies have shown that the drug diffusivity of hyaluronic acid hydrogel plays an important role in the treatment of joint diseases. The drug diffusivity is closely related to the water content of hydrogel. In addition, different water content will not only affect its mechanical and tribological properties, but also change the effect of drug release.

METHODS

In this work, a Molecular dynamics simulation was used to investigate the effect of water content on spatial distribution, tribological and mechanical properties of a hyaluronic acid hydrogel network. This paper focuses on the analysis and calculation of the radial distribution function of 20, 40, 60, and 80% water content model and the friction force and mechanical parameters under the influence of different load and friction speed.

RESULTS

The results show that at 20 and 40% water content, the spatial distribution is loose and the intermolecular force is not strong, resulting in a major lack in tribological and mechanical properties; whereas at 60 and 80% water content, the spatial distribution becomes gradually compact and the intermolecular force is gradually increased. The tribological and mechanical properties manifest a marked improvement.

CONCLUSIONS

The calculations reveal that the hydrogel model has the best wear resistance, pressure resistance, and plastic deformation resistance at 80% water content. In the range of 20-80% water content, the mechanical properties and friction properties of hydrogels become better and better with the increase of water content.

Responsive Hydrogels Based on Triggered Click Reactions for Liver Cancer

Globally, liver cancer, which is one of the major cancers worldwide, has attracted the growing attention of technological researchers for its high mortality and limited treatment options. Hydrogels are soft 3D network materials containing a large number of hydrophilic monomers. By adding moieties such as nitrobenzyl groups to the network structure of a cross-linked nanocomposite hydrogel, the click reaction improves drug-release efficiency in vivo, which improves the survival rate and prolongs the survival time of liver cancer patients. The application of a nanocomposite hydrogel drug delivery system can not only enrich the drug concentration at the tumor site for a long time but also effectively prevents the distant metastasis of residual tumor cells. At present, a large number of researches have been working toward the construction of responsive nanocomposite hydrogel drug delivery systems, but there are few comprehensive articles to systematically summarize these discoveries. Here, this systematic review summarizes the synthesis methods and related applications of nanocomposite responsive hydrogels with actions to external or internal physiological stimuli. With different physical or chemical stimuli, the structural unit rearrangement and the controlled release of drugs can be used for responsive drug delivery in different states.

A comparative study on cross-linking of fibrillar gel prepared by tilapia collagen and hyaluronic acid with EDC/NHS and genipin

Chemical cross-linking is an important step to grant satisfying properties to collagen-based materials. However, there are few comparative studies on crossing-linking of collagen-based fibrillar gels which are preferred biomaterials for similar properties to native tissues with different cross-linking agents. In this study, a fibrillar gel was fabricated with tilapia collagen and hyaluronic acid, and cross-linking conditions with EDC/NHS and genipin were discussed. Genipin gave gels much higher equilibrium cross-linking degree than EDC/NHS. ATR-FTIR and XPS showed EDC/NHS offered short-range cross-linking formed by amino and carboxyl groups in fibrils, while genipin induced long-range cross-linking by nucleophilic reaction through attack of amino groups in fibrils on carbon atoms at C-3 as well as ester groups in genipin, besides improved hydrogen bonds. XRD and SEM revealed the structural integrity of gels was strengthened after cross-linking, whereas fibril bundles disaggregated into thin fibrils. Consequently, swelling capacity and anti-degraded property were enhanced significantly, while thermal stability weakened. The fibrillar gels had good biocompatibility, but interestingly the appearance and migration of L929 fibroblasts were influenced by cross-linking degree. These results demonstrated that aquatic collagen-based fibrillar gel cross-linked by genipin had greater potential in biomaterials than EDC/NHS, whereas the cross-linking degree should be controlled.

Origin of critical nature and stability enhancement in collagen matrix based biomaterials: Comprehensive modification technologies

Collagen is the most abundant protein in animals and one of the most important extracellular matrices that chronically plays an important role in biomaterials. However, the major concern about native collagen is the lack of its thermal stability and weak resistance to proteolytic degradation. Currently, a series of modification technologies have been explored for critical nature and stability enhancement in collagen matrix-based biomaterials, and prosperously large-scale progress has been achieved. The establishment of covalent bonds among collagen noumenon has been verified assuringly to have pregnant influences on its physicochemical properties and biological properties, enlightening to discuss the disparate modification technologies on specific effects on the multihierarchical structures and pivotal performances of collagen. In this review, various existing modification methods were classified from a new perspective, scilicet whether to introduce exogenous substances, to reveal the basic scientific theories of collagen modification. Understanding the role of modification technologies in the enhancement of collagen performance is crucial for developing novel collagen-based biomaterials. Moreover, the different modification effects caused by the interaction sites between the modifier and collagen, and the structure-activity relationship between the structure of the modifier and the properties of collagen were reviewed.

A review on plant polysaccharide based on drug delivery system for construction and application, with emphasis on traditional Chinese medicine polysaccharide

Carbohydrate polymers with unique chemical composition, molecular weight and functional chemical groups show multiple potentials in drug delivery. Most carbohydrate polymers such as plant polysaccharides exhibit advantages of biodegradability, ease of modification, low immunogenicity and low toxicity. They can be conjugated, cross-linked or functionally modified, and then used as nanocarrier materials. Polysaccharide drug delivery system can avoid the phagocytosis of the reticuloendothelial system, prevent the degradation of biomolecules, and increase the bioavailability of small molecules, thus exerting effective therapeutic effects. Therefore, they have been fully explored. In this paper, we reviewed the construction methods of drug delivery systems based on carbohydrate polymers (astragalus polysaccharide, angelica polysaccharide, lycium barbarum polysaccharide, ganoderma lucidum polysaccharide, bletilla polysaccharide, glycyrrhiza polysaccharide, and epimedium polysaccharides, etc). The application of polysaccharide drug delivery systems to deliver small molecule chemotherapeutic drugs, gene drugs, and metal ion drugs was also briefly introduced. At the same time, the role of the polysaccharide drug delivery system in tumor treatment, targeted therapy, and wound healing was discussed. In addition, the research of polysaccharide delivery systems based on the therapeutic efficacy of traditional Chinese medicine was also summarized and prospected.

Prevention of collagen hydrogel contraction using polydopamine-coating and alginate outer shell increases cell contractile force

Collagen is the most abundant protein in the extracellular matrix of mammals and has a great effect on various cell behaviors including adhesion, differentiation, and migration. However, it is difficult to utilize collagen gel as a physical scaffold in vitro because of its severe contraction. Decrease in the overall hydrogel volume induces changes in cell distribution, and mass transfer within the gel. Uncontrolled mechanical and physiological factors in the fibrous matrix result in uncontrolled cell behaviors in the surrounding cells. In this study, two strategies were used to minimize the contraction of collagen gel. A disk-shaped frame made of polydopamine-coated polydimethylsiloxane (PDMS) prevented horizontal contraction at the edge of the hydrogel. The sequentially cross-linked collagen gel with alginate outer shell (CA-shell) structure inhibited the vertical gel contraction. The combined method synergistically prevented the hydrogel from shrinkage in long-term 3D cell culture. We observed the shift in balance of differentiation from adipogenesis to osteogenesis in mesenchymal stem cells under the environment where gel contraction was prevented, and confirmed that this phenomenon is closely associated with the mechanotransduction based on Yes-associated protein (YAP) localization. Development of this contraction inhibition platform made it possible to investigate the influence of regulation of cellular microenvironments. The physical properties of the hydrogel fabricated in this study were similar to that of pure collagen gel but completely changed the cell behavior within the gel by inhibition of gel contraction. The platform can be used to broaden our understanding of the fundamental mechanism underlying cell-matrix interactions and reproduce extracellular matrix in vivo.

X-ray tomography analysis reveals the influence of graphene on porous morphology of collagen cryogels

X-ray micro-tomography based analysis of porous hydrogel has gained a wide attention recently. It provides an advantage in three-dimensional analysis of pore morphometric and interconnection within the hydrogel network. We have fabricated highly elastic graphene crosslinked collagen hydrogel using cryogelation technique. The influence of graphene as a nano-crosslinker on the overall porosity and inter-connections between the pores in collagen cryogels was determined using X-ray micro-tomography. We have evaluated the effect of different concentration of amino-functionalized graphene nano-crosslinker on collagen cryogels porosity, pore volume, interconnectivity density, fractal dimensions and pore wall thickness. This study, reveals that the use of graphene as a nano-crosslinker have improved micro-architecture as compare to collagen cryogels in the absence of graphene for tissue engineering applications.

Chitosan thermosensitive hydrogels based on lyophilizate powders demonstrate significant potential for clinical use in endoscopic submucosal dissection procedures

The goal of this study was to develop intraoperative biomaterials for use in endoscopic submucosal dissection (ESD) procedures that are stable during storage, easy to use, and effective in clinical practice. Therefore, injectable thermosensitive hydrogels were developed based on lactobionic acid-modified chitosan/chitosan/β-glycerophosphate (CSLA/CS/GP) hydrogel lyophilizate powders, and their properties were compared with original hydrogels that had not been freeze-dried. The results indicated that the lyophilizate powders retained their thermosensitive properties, and gels could be formed within 5 min at 37 °C. Compared to the original hydrogels, the injectability of the hydrogels derived from lyophilizate powders increased significantly. These novel materials maintained their original porous network lamellar structure but exhibited improved mechanical strength and tissue adhesion. Their application with L929 and GES-1 cells revealed that the lyophilizate powder hydrogels demonstrated good cytocompatibility and clearly protected the cells in an acidic environment. The results of submucosal injection experiments involving porcine stomach tissue indicated that the heights of the cushions created by CSLA/CS/GP lyophilizate powder hydrogels lasted longer than those generated with normal saline. The thermosensitive hydrogels based on lyophilizate powders may contribute to practical clinical applications involving ESD, and may also have potential value for other applications in the digestive tract.

Enlightenment of Growth Plate Regeneration Based on Cartilage Repair Theory: A Review

The growth plate (GP) is a cartilaginous region situated between the epiphysis and metaphysis at the end of the immature long bone, which is susceptible to mechanical damage because of its vulnerable structure. Due to the limited regeneration ability of the GP, current clinical treatment strategies (e.g., bone bridge resection and fat engraftment) always result in bone bridge formation, which will cause length discrepancy and angular deformity, thus making satisfactory outcomes difficult to achieve. The introduction of cartilage repair theory and cartilage tissue engineering technology may encourage novel therapeutic approaches for GP repair using tissue engineered GPs, including biocompatible scaffolds incorporated with appropriate seed cells and growth factors. In this review, we summarize the physiological structure of GPs, the pathological process, and repair phases of GP injuries, placing greater emphasis on advanced tissue engineering strategies for GP repair. Furthermore, we also propose that three-dimensional printing technology will play a significant role in this field in the future given its advantage of bionic replication of complex structures. We predict that tissue engineering strategies will offer a significant alternative to the management of GP injuries.

A review of the properties and applications of bioadhesive hydrogels

Due to their outstanding properties, bioadhesive hydrogels have been extensively studied by researchers in recent years.

Activated hyaluronic acid/collagen composite hydrogel with tunable physical properties and improved biological properties

Self-crosslinkable and injectable hydrogels were fabricated with collagen type I (Col I) and N-hydroxy sulfosuccinimide activated hyaluronic acid (HA-sNHS) at physiological conditions without any initiators or crosslinkers. The physical properties of hydrogels, such as gelation time, swelling property, degradation property and mechanical property could be regulated by adjusting the substitution degree (DS) of HA-sNHS. Chondrocytes were encapsulated into hydrogels and their proliferation, phenotype maintenance and matrix secretion were characterized. The results demonstrated that chondrocytes in hydrogel Col I/HA-sNHS32% in which the DS of HA-sNHS was 32% secreted more cartilage specific matrix than others. The results of animal experiment demonstrated that hydrogels Col I and Col I/HA-sNHS32% both had good biodegradability and cytocompatibility. This study provided a novel and simple method for fabrication of self-crosslinkable and injectable hydrogels with tunable physical properties. It implied that these hydrogels could find some applications in the fields of cell encapsulation and tissue engineering.

A new sponge-type hydrogel based on hyaluronic acid and poly(methylvinylether-alt-maleic acid) as a 3D platform for tumor cell growth

A new sponge-type hydrogel was obtained by cross-linking hyaluronic acid (HA) and poly(methylvinylether-alt-maleic acid) P(MVE-alt-MA) through a solvent-free thermal method. The sponge-type hydrogel was characterized and checked as a support for cell growth. The influence of concentration and weight ratio of polymers on the morphology and hydrogel stability was investigated. The total polymers concentration of 3% (w/w) and the weight ratio of 1:1 were optimal for the synthesis of a stable hydrogel (HA³P50) and to promote cell proliferation. The swelling measurements revealed a high-water absorption capacity of the hydrogel in basic medium. Diphenhydramine (DPH), lidocaine (Lid) and propranolol (Prop) were loaded within the hydrogel as a model drugs to investigate the ability of drug transport and release. In vitro studies revealed that HA³P50 hydrogel promoted the adhesion and proliferation of human hepatocellular carcinoma cell line HepG2, providing a good support for 3D cell culture to obtain surrogate tumor scaffold suitable for preclinical anti-cancer drug screening.