Synthesis of a starch-based sulfonic ion exchange resin and adsorption of dyestuffs to the resin

Investigating the adsorption processes of polymer resins for the removal of micropollutants: A comprehensive review in the field of environmental remediation

The growing worry for human health stems from the fact that micropollutants (MPs), particularly dyes, are more common in aquatic settings. These particles pose a serious risk to both humans and animals since they have been found in a variety of bodily fluids and waste products from both humans and animals. MPs pose significant dangers to human health and other living things due to their extended half-lives, high fragmentation propensity, and capacity to absorb organic pollutants as well (MB, MR, MO and CV dyes) and heavy metals as well (Pb(II), Cd(II) Co(II) Cr(III) and Ag(I) ….). They also contribute to the degradation of terrestrial and aquatic habitats. Sustainable and effective methods for removing MPs from wastewater and treating organic micropollutants in an environmentally friendly manner are being developed in order to address this problem. This work offers a thorough review of adsorption technology as a productive and environmentally friendly means of eliminating MPs from aqueous environments, with an emphasis on developments in the application of polymeric resin in MP removal. The review examines the adsorption process and the variables that affect adsorption efficiency, including the characteristics of the micropollutant, the resin, and the solution. To improve understanding, a number of adsorption mechanisms and models are explored. The study also addresses the difficulties and future possibilities of adsorption technology, emphasising the need to optimize resin characteristics, create sustainable and affordable regeneration techniques, and take into account the environmental effects of adsorbent materials.

Optical Fiber Surface Plasmon Resonance Sensor for Glyceryl Tributyrate Detection Based on the PAA/CS Composite Hydrogel Embedding Protease Method

Glycerol tributyrate as a low-density lipoprotein plays a crucial role in drug development and food safety. In this work, a novel high-stability fiber optic sensor for glyceryl tributyrate based on the poly(acrylic acid) (PAA) and chitosan (CS) composite hydrogel embedding method is first proposed. Compared with traditional functionalization, the lipase in a polymer network structure used in this article can not only avoid chemical reactions that cause damage to the enzyme structure but also avoid the instability of ionic bonds and physical adsorption. Therefore, the PAA/CS hydrogel method proposed in this article can effectively retain enzyme structure. First, the impact of different layers (one to five layers) of PAA/CS on pH sensing performance was explored, and it was determined that layers 1-3 could be used for subsequent sensing experiments. Within the linear detection range of 0.5-10 mM, the detection sensitivities of the one to three layers of the biosensor are divided into 0.65, 0.95, and 1.51 nm/mM, respectively, with the three layers having the best effect. When the number of coating layers is three, the detection limit of the sensor is 0.47 mM, meeting the millimole level detection standard for anticancer requirement. Furthermore, the stability and selectivity of the sensor (in the presence of hemoglobin, urea, cholesterol, acetylcholine, and glucose) were analyzed. The three-layer sensor is used for sample detection. At concentrations of 1-10 mM, the absolute value of the recovery percentage (%) is 82-99%, which can accurately detect samples. The sensor proposed in this paper has the advantages of low sample consumption, high sensitivity, simple structure, and label-free measurement. The enzyme-embedding method provides a new route for rapid and reliable glyceryl tributyrate detection, which has potential applications in food safety as well as the development of anticancer drugs.

Adsorption removal of cationic dyes from wastewater using the corn straw modified with diethylenetriaminepentacetic acid ligand

Taking the thiazide cationic dye methylene blue (MB), triphenylmethane cationic dye crystal violet (CV), monoazo cationic dye cationic red 46 (R-46), and polycarboxycyanine cationic dye cationic rosé FG (P-FG) as the research objects, the adsorption behaviors of a self-made corn straw modified adsorbent HQ-DTPA-I for the dyes were investigated in depth. Under optimized conditions, HQ-DTPA-I can quickly adsorb most dyes within 3 min and reach equilibrium adsorption in 15-20 min. The removal rates of HQ-DTPA-I to MB, CV, R-46 and AP-FG can reach 95.28 %, 99.78 %, 99.28 % and 98.53 %, respectively. It also has good anti-interference ability for common ions present in most actual dye wastewater. For six consecutive adsorption-desorption cycles, the adsorption performance of HQ-DTPA-I can still reach 80.17 %, 81.61 %, 90.77 % and 83.48 % of the initial adsorption capacity, indicating good recovery performance. Based on Gaussian density functional theory to calculate its surface potential energy, it is found that the adsorption mechanism of HQ-DTPA-I for the cationic dyes is mainly due to the electrostatic interaction between the carboxyl groups in ligand DTPA and amino groups in dye molecules.

Natural Polysaccharide-Based Hydrogels Used for Dye Removal

Removal of contaminants from discharge water is vital and demands urgent assistance with the goal to keep clean water. Adsorption is one of the most common, efficient, and low-priced methods used in water treatment. Various polysaccharide-based gels have been used as efficient dye adsorbents from wastewater. This review summarizes cutting-edge research of the last decade of different hydrogels based on natural polysaccharides (chitin, chitosan, cellulose, starch, pullulan, and dextran) concerning their dye adsorption efficiency. Beyond their natural abundance, attributes of polysaccharides such as biocompatibility, biodegradability, and low cost make them not only efficient, but also environmentally sustainable candidates for water purification. The synthesis and dye removal performance together with the effect of diverse factors on gels retaining ability, kinetic, and isotherm models encountered in adsorption studies, are introduced. Thermodynamic parameters, sorbent recycling capacity along with conclusions and future prospects are also presented.

Cellulose-supported bioadsorbent from natural hemp fiber for removal of anionic dyes from aqueous solution

The aim of this study is to prepare an eco-friendly bioadsorbent by graft copolymerization and modification from hemp fiber including bio-macromolecules such as cellulose, hemicellulose and lignin for anionic dyes adsorption from aqueous solutions, and to investigate adsorptive properties. The prepared cellulose-supported bioadsorbent (TEPA-(GMA-g-HF)) was characterized in detail using SEM-EDX, STEM, FTIR, XRD, TGA and BET techniques and calculating the point of zero charge. It was used as an adsorbent to remove three different anionic dyes, Remazol Brilliant Blue R (RBBR), Reactive Red 120 (RR120) and Reactive yellow 160 (RY160) from the aqueous medium. The effects of adsorbent amount, pH, initial dye concentration, time and temperature on the adsorption were investigated. From the results, it was determined that the adsorption of all three dyes to the developed fibrous bioadsorbent was more compatible with the pseudo-second-order kinetic and the Langmuir isotherm model. It was found that the adsorption capacity increased with increasing temperature, and the adsorption capacity at 298 K was 91.70 mg/g for RBBR, 83.33 for RY160 and 76.34 mg/g for RR120, respectively. Dye removal efficiencies were provided as approximately 100 % at acidic pHs. This high removal efficiency has also achieved in the dense matrix medium, and even after five consecutive reused.

Mussel-inspired polydopamine-modified silk nanofibers as an eco-friendly and highly efficient adsorbent for cationic dyes

Obtaining silk nanofibers by simple swelling and mechanical splitting of fibers.

Modification of coal fly ash and its use as low-cost adsorbent for the removal of directive, acid and reactive dyes

Directive, acid and reactive dyes are the carcinogenic dyes which have complex structures and difficult to remove from the industrial wastewater. In this study, coal fly ash (CFA) was modified with HCl and NaOH solution and used for the removal of direct fast scarlet 4BS, direct sky blue 5B, acid navy blue R, and reactive turquoise blue KN-G dyes. Laboratory experiments were carried out to analyze the performance of modified coal fly ash (MCFA) to check the removal efficiency and adsorption capacity of dyes. The maximum removal efficiency of direct fast scarlet 4BS and direct sky blue 5B were recorded 96.03% and 93.820%, respectively using 0.05 g adsorbent dosage at 100 mg/L initial concentration. The results of MCFA were compared with carbon black, chitosan, starch, zeolite and unmodified coal fly ash (UMCFA) at lower dosage 0.05 g and higher dosage 0.4 g. Adsorption isotherm were analyzed by Langmuir and Freundlich model by different dyes concentrations, the result stated that Freundlich and Langmuir model (±0.9918, ±0.9974) was fitted by chemisorption and physisorption methods for all four dyes. Adsorption kinetic were also determined by Pseudo-first-order and Pseudo-second-order at different contact times with dye molecules and adsorbent active sites, and the results showed that the adsorption behaviors of all four dyes were described better by pseudo-second-order kinetics than pseudo-first-order kinetics. Recommended dosage of modified fly ash is between 10 ‱ to 20 ‱ for simulated textile industrial waste water and regeneration temperature is 300 ℃.

Preparation of resin-based composites containing Ce and cationic polymers with abundant promotional affinity sites for phosphate capture

A new type of composite, D301-Ce+, for efficient and selective phosphate removal.

Emerging novel polymeric adsorbents for removing dyes from wastewater: A comprehensive review and comparison with other adsorbents

Dye molecules are one of the most hazardous compounds for human and animal health and the excess intake of these materials can create toxic impacts. Several studies show the practicality of the adsorption process for dye uptake from wastewaters. In recent years, various adsorbents were used to be efficient in this process. Among all, polymeric adsorbents demonstrate great applicability in different environmental conditions and attract many researchers to work on them, although there is not enough reliable and precise information regarding these adsorbents. This study aims to investigate some influential parameters such as their type, physical properties, experimental conditions, their capacity, and further modeling along with a comparison with non-polymeric adsorbents. The influence of the main factors of adsorption capacity was studied and the dominant mechanism is explained extensively.

Adsorption Properties for La(III), Ce(III), and Y(III) with Poly(6-acryloylamino-hexyl hydroxamic acid) Resin

Using polyacrylic resin followed by the substitution reaction with 6-aminohexyl hydroxamic acid, poly(6-acryloylamino-hexyl hydroxamic acid) resin (PAMHA) was successfully synthesized. PAMHA, a spherical resin with the particle size of 0.4 mm, is a novel polyamide hydroxamic acid chelating resin containing acylamino and hydroxamic acid functional groups. A series of influences (pH, contact time, temperature, and the initial concentrations of rare earth ions) were investigated to determine the adsorption properties. The adsorption capacity for La(III), Ce(III), and Y(III) ions were 1.030, 0.962, and 1.450 mmol·g-1, respectively. Thermodynamic and kinetic studies were also carried out to show that the uptake of rare earth ions onto PAMHA fitted well the pseudo-second-order model and Langmuir isotherm, and the adsorption process was spontaneous endothermic. In addition, desorption of rare earth ions was achieved by using 2 mol·L-1 HNO3 and desorption efficiencies for La(III), Ce(III), and Y(III) ions were 98.4, 99.1, and 98.8%, respectively. Properties of PAMHA resin were characterized by scanning electron microscope (SEM), Fourier transform infrared spectrometry (FTIR), and X-ray photoelectron spectrometer (XPS). The results showed that there was coordination between the rare earth ions with PAMHA and rare metal ions were chemically adsorbed on the surface of the PAMHA.