Green and facile synthesis of carboxymethylcellulose/ZnO nanocomposite hydrogels crosslinked with Zn2+ ions

A comprehensive review on crosslinked network systems of zinc oxide-organic polymer composites

In recent years, the synergistic crosslinked networks formed by zinc oxide (ZnO) particles and organic polymers have gained significant attention. This importance is ascribed due to the valuable combination of low band gap containing ZnO particles with responsive behavior containing organic polymers. These properties of both ZnO and organic polymers make a suitable system of crosslinked ZnO-organic polymer composite (CZOPC) for various applications in the fields of biomedicine, catalysis, and environmental perspectives. The literature extensively provided the diverse morphologies and structures of CZOPC, and these architectural structures play a crucial role in determining their efficiency across various applications. Consequently, the careful design of CZOPC shapes tailored to specific purposes has become a focal point. This comprehensive review provides insights into the classifications, synthetic approaches, characterizations, and applications of ZnO particles decorated in organic polymers with crosslinked network. The exploration extends to the adsorption, environmental, catalytic, and biomedical applications of ZnO-organic polymer composites. Adopting a tutorial approach, the review systematically investigates and elucidates the applications of CZOPC with a comprehensive understanding of their diverse capabilities and uses.

Ecofriendly Controlled-Release Insecticide Carrier: pH-/Temperature-Responsive Rosin-Derived Hydrogels for Avermectin Delivery against Mythimna separata (Walker)

The exploration of environmentally friendly, less toxic, sustained-release insecticide is increasing with the growing demand for food to meet the requirements of the expanding population. As a sustained-release carrier, the unique, environmentally friendly intelligent responsive hydrogel system is an important factor in improving the efficiency of insecticide utilization and accurate release. In this study, we developed a facile approach for incorporating the natural compound rosin (dehydroabietic acid, DA) and zinc ions (Zn2+) into a poly(N-isopropylacrylamide) (PNIPAM) hydrogel network to construct a controlled-release hydrogel carrier (DA-PNIPAM-Zn2+). Then, the model insecticide avermectin (AVM) was encapsulated in the carrier at a drug loading rate of 36.32% to form AVM@DA-PNIPAM-Zn2+. Surprisingly, the smart controlled carrier exhibited environmental responsiveness, strongly enhanced mechanical properties, self-healing ability, hydrophobicity, and photostability to ensure a balance between environmental friendliness and the precision of the drug release. The release experiments showed that the carboxyl and amide groups in the polymer chains alter the intermolecular forces within the hydrogel meshes and ingredient diffusion by changing temperatures (25 and 40 °C) and pH values (5.8, 7.4, and 8.5), leading to different release behaviors. The insecticidal activity of the AVM@DA-PNIPAM-Zn2+ against oriental armyworms was good, with an effective minimum toxicity toward aquatic animals. Therefore, AVM@DA-PNIPAM-Zn2+ is an effective drug delivery system against oriental armyworms. We anticipate that this ecofriendly, sustainable, smart-response carrier may broaden the utilization rosin and its possible applications in the agricultural sector.

Bio-valorization of Tagetes floral waste extract in fabrication of self-healing Schiff-base nanocomposite hydrogels for colon cancer remedy

The drastic boom in floriculture and social events in religious and recreational places has inevitably led to generation of tremendous floral waste across the globe. Marigold (Tagetes erecta) is one of the most common loose flowers offered for the same. Generally discarded, these Tagetes floral wastes could be valorized for biogenic syntheses. In this study, we have utilized the floral extract towards green synthesis of nano ZnO, the formation of which was affirmed from different analytical techniques. Bionanocomposite Schiff-base hydrogel composed of chitosan and dialdehyde pectin was fabricated by the facile strategy of in situ polymer cross-linking, and the ZnO nanoparticles were embedded in the hydrogel matrix. The hydrogel exhibited remarkable self-healing ability. The antioxidant and anti-inflammatory activities were enhanced owing to nano ZnO. Furthermore, it was hemocompatible and biodegradable. A controlled release drug profile for 5-fluorouracil from the hydrogel was accomplished in the colorectum. The exposure of the drug-loaded nanocomposite hydrogel demonstrated improved anticancer effects in HT-29 colon cancer cells. The findings of this study altogether put forth the successful biovalorization of Tagetes floral waste extract for colon cancer remedy.

Synthesis, optimization via response surface methodology, and structural properties of carboxymethylcellulose/curcumin/graphene oxide biocomposite films/coatings for the shelf-life extension of shrimp

In this study, carboxymethylcellulose (CMC), curcumin (Cur), and graphene oxide (GO) were used to prepare a novel biocomposite film (CMC-Cur-GO). A central composite design under response surface methodology was employed to optimize the films in terms of water vapor permeability (WVP) and swelling percentage (SP). Under the optimum conditions, which the rates of CMC, GO and curcumin were found to be 1350 mg, 29.99 mg, and 0.302 g, respectively, WVP and SP of CMC-Cur-GO were obtained 0.902 × 10-8 (g/m·h·Pa) and 13.62 %, respectively. The biocomposite films (CMC, CMC-Cur, CMC-GO and CMC-Cur-GO) were characterized by Fourier transform infrared spectroscopy, field-emission scanning electron microscope, thermal gravimetric analysis, X-ray diffraction analysis, ultraviolet-vis light transmittance, moisture content, and mechanical properties. Compared with pure CMC film, the tensile strength, elongation at break and Young's modulus of CMC-Cur-GO were significantly improved by up to 75 %, 41 % and 23 %, respectively (p < 0.05). Then, CMC-Cur-GO was applied as a coating solution for the shrimps. The coated shrimps with the CMC-Cur-GO significantly (p < 0.05) showed a noteworthy improvement in microbial quality (total and psychrotrophic bacterial count), chemical deterioration and lipid oxidation (pH and total volatile basic nitrogen, peroxide value and thiobarbituric acid) and physical characteristic (weight loss) as compared to other samples. The CMC-Cur-GO coating could increase the shelf life of shrimp under refrigerated storage.

Preparation of pH-responsive oxidized regenerated cellulose hydrogels compounded with nano-ZnO/chitosan/aminocyclodextrin ibuprofen complex for wound dressing

Recently, using oxidized regenerated cellulose (ORC) to build a hydrogel system on promoting healing in wounds has a fast-growing market. However, it remains a challenge to improve the degree of oxidation of regenerated cellulose (RC) and to prepare matrices that are uniquely responsive to the wound environment. Herein, highly oxidized aldehyde-based cellulose from porous RC was prepared by NaBH4-HCl swelling and then NaIO4 oxidation pathway. Chitosan (CS), ethylenediamine-cyclodextrin (EDA-CD) along with ORC have been used to construct hydrogel matrices that are pH-responsive and capable of controlled drug release for use as future wound dressings. And zinc oxide nanoparticles (ZnO NPs) with antimicrobial effect and ibuprofen (IBU) with analgesic effect were piggybacked into the hydrogel system. XRD was used to study the presence of ZnO. SEM was used to observe the surface structure of the prepared hydrogel. TEM was used to observe the particle size of the ZnO NPs. Meanwhile, the oxidation conditions of the ORC were explored. Furthermore, the mechanical, swelling, water retention, cytotoxicity, bacterial inhibition properties and treatment effect, which are closely related to the application of wound dressing, were carefully researched. The unique characteristics of prepared hydrogel, including pH-responsive degradability and sustained release properties of IBU, were also investigated.

Mechanical properties and water resistance improvement of thermoplastic modified starch, carboxymethyl cellulose, and zinc oxide nanometal particles by reactive blending

Novel biodegradable thermoplastic starch (TPS) with high mechanical properties and water resistance was developed using reactive blending technique. Effect of zinc oxide (ZnO) addition to TPS properties and reaction was investigated. Thermoplastic modified starch (TPMS) was prepared by melt-mixing modified starch with glycerol 70/30%wt/wt. Carboxy methyl cellulose (CMC) 5%wt was incorporated with modified starch, glycerol, and zinc oxide (ZnO) 0-5 %wt. Fourier-transform infrared (FTIR) spectroscopy analysis confirmed the formation of the carboxyl anion (OZn) between the -COO- of CMC and the free Zn+ ion of ZnO. The tensile strength of the TPMS/CMC/ZnO blend increased 7 time with ZnO 5 % (14 MPa) addition compared to TPMS (2 MPa). The color (∆E) of TPMS/CMC/ZnO differed notably at high ZnO concentrations (1-5 %wt). The TPMS/CMC blend displayed a smooth fracture surface due to the miscibility of the materials. Small particles of ZnO dispersed finely in the TPMS matrix and increased the interfacial tension and water contact angle of the blends. The miscibility of TPS with CMC and the occurrence of ionic interactions of -COO- of CMC and -OH of starch with the Zn+ ion as physical crosslinking were indicated to improve the mechanical properties and water resistance of the blends.

Carboxymethyl Cellulose/Polyacrylamide/Fe3O4 Magnetic Ion Imprinting Biosorbent for Removal and Recovery of La3

To use resources rationally, the recovery and recycling of rare earth (RE) from industrial sewage have attracted a lot of attention. Herein, a polymer adsorbent CMC/PAM/Fe3O4 (CPF) was synthesized from renewable carboxymethyl cellulose (CMC), polyacrylamide (PAM), and Fe3O4 by the template of La3+ using ion imprinting technology. The CPF was characterized with X-ray diffraction (XRD), IR, X-ray photoelectron spectroscopy (XPS), and scanning electron microscope (SEM), and results show that PAM and CMC can crosslink with each other and form copolymers with Fe3O4 particles dispersing in it. The adsorption properties for the template ions La3+ were fully studied. It is found that CPF exhibited good adsorption performance with an adsorption capacity of 34.6 mg·g-1. Cycling experiments show that CPF still has high efficiency even after 5 cycles. Meanwhile, the desorption rate can reach more than 98%. The low wastage and high adsorption/desorption efficiency would enable CPF to be a good candidate adsorbent for removal/recovery of La3+ from industrial sewage.

Preparation of carboxymethylcellulose / ZnO / chitosan composite hydrogel microbeads and its drug release behaviour

In this study, a novel carboxymethylcellulose / ZnO / chitosan (CMC / ZnO / Cs) hydrogel microbeads loaded with crosslinked porous starch / curcumin (CPS / Cur) were designed and prepared to improve the encapsulation efficiency of curcumin for drug delivery to specific sites. It was found that the total pore volume of crosslinked porous starch (CPS) was increased by 1150 % when compared to the native starch (NS), and the adsorption ratio of curcumin by CPS was enhanced by 27 % when compared to NS. Secondly, the swelling ratio of composite hydrogel microbeads was within 25 % in an acidic environment at pH 1.2, and the swelling ratio of hydrogel microbeads sharply increased to 320 % ~ 370 % at pH 6.8 and 7.4. In addition, the results of in vitro simulated release experiments showed that the released amount of hydrogel microbeads loaded with NS/Cur and CPS/Cur in SGF were within 7 % in simulated gastric fluid (SGF). The highest released amount of curcumin was 65.26 % for hydrogel beads loaded with CPS/Cur, which was 26 % lower than that of hydrogel microbeads loaded with Cur in simulated intestinal fluid (SIF). In simulated colonic fluid (SCF), the released amount of hydrogel microbeads loaded with CPS/Cur and Cur were 73.96 % and 91.69 %, respectively. In conclusion, pH-sensitive drug delivery system with good drug stability and bioavailability were successfully prepared with carboxymethylcellulose / ZnO / chitosan bead, suitable targeting drug delivery to the small intestine.

Development of soy protein isolate/sodium carboxymethyl cellulose synbiotic microgels by double crosslinking with transglutaminase and aluminum chloride for delivery system of Lactobacillus acidophilus

This study was carried out to develop soy protein isolate (SPI)/sodium carboxymethyl cellulose (NaCMC) synbiotic microgels by applying a double-crosslinking technique using transglutaminase and different concentrations of AlCl₃ (0, 6, 7, 8 %) and also by adding Lactobacillus acidophilus (L. acidophilus) and pectic oligosaccharide. Synbiotic microgels crosslinked using 8 % AlCl₃ (SPI/NaCMC-Al³⁺₈ microgels) showed the highest encapsulation efficiency (92 %). The double-crosslinked microgels exhibited a smooth surface as proved by SEM. FT-IR, XRD, and DSC analyses showed the possible interaction within matrices and demonstrated the higher thermal stability of synbiotic microgels prepared using a higher concentration of AlCl₃. All in all, after exposure to simulated digestion fluid, heat treatment (72 °C, 15 s), and refrigerated storage, more cells in double-crosslinked microgels survived compared to single-crosslinked microgels. In particular, probiotic viability was highest in SPI/NaCMC-Al³⁺₈ microgels. These results indicate that the SPI/NaCMC-Al³⁺₈ microgels developed in this study can effectively protect L. acidophilus against the external environment.

3D-Printed Pectin/Carboxymethyl Cellulose/ZnO Bio-Inks: Comparative Analysis with the Solution Casting Method

Bio-inks consisting of pectin (Pec), carboxymethyl cellulose (CMC), and ZnO nanoparticles (ZnO) were used to prepare films by solution casting and 3D-printing methods. Field emission scanning electron microscopy (FE-SEM) was conducted to observe that the surface of samples made by 3D bioprinter was denser and more compact than the solution cast samples. In addition, Pec/CMC/ZnO made by 3D-bioprinter (Pec/CMC/ZnO-3D) revealed enhanced water vapor barrier, hydrophobicity, and mechanical properties. Pec/CMC/ZnO-3D also showed strong antimicrobial activity within 12 h against S. aureus and E. coli O157: H7 bacterial strains compared to the solution cast films. Further, the nanocomposite bio-inks used for 3D printing did not show cytotoxicity towards normal human dermal fibroblast (NDFB) cells but enhanced the fibroblast proliferation with increasing exposure concentration of the sample. The study provided two important inferences. Firstly, the 3D bioprinting method can be an alternative, better, and more practical method for fabricating biopolymer film instead of solution casting, which is the main finding of this work defining its novelty. Secondly, the Pec/CMC/ZnO can potentially be used as 3D bio-inks to fabricate functional films or scaffolds and biomedical applications.

Anticancer and Free Radical Scavenging Competence of Zinc Oxide Nanoparticles Synthesized by Aqueous Leaf Extract of Phyllanthus acidus

The purpose of this study was aimed to investigate the zinc oxide nanoparticles (ZnONPs) synthesizing efficiency of aqueous leaf extract of Phyllanthus acidus. Furthermore, the antioxidant and anticancer activities of synthesized ZnONPs were also investigated through the in-vitro approach. The obtained results show that the aqueous extract of P. acidus can synthesize ZnONPs, as evidenced by a sharp absorbance peak at 375 nm. The Fourier transform infrared spectroscopy (FTIR) analysis confirmed that the aqueous extract contained significant numbers of functional groups, which were involved in reducing zinc nitrate into ZnONPs. Also, they participate in the capping and stabilization of synthesized ZnONPs and their size ranged from 27.14-35.74 nm with a spherical shape . The results obtained in ABTS radical scavenging activity 1, 1-diphenyl-2-picryl-hydroxyl (DPPH), hydrogen peroxide (H2O2), and 2,2'-Azino-Bis(3-ethylbenzene thiazoline-6-sulfonic acid) (ABTS) assays declared has excellent in-vitro radicals scavenging activity with reasonable IC50 values. Interestingly, these green synthesized ZnONPs have an excellent anticancer activity against human epidermoid carcinoma (Hep3) cell line in an in-vitro approach. These findings imply that an aqueous leaf extract of P. acidus can be used to synthesize pharmaceutically valuable ZnONPs. To consider such nanomaterials as potential therapeutic agents, optimization and in-vivo biomedical studies are required.

Composites of cellulose nanocrystals in combination with either cellulose nanofibril or carboxymethylcellulose as functional packaging films

Cellulose nanocrystals (CNC) were mixed with either cellulose nanofibril (CNF) or carboxymethylcellulose (CMC) in variable proportions (0/100, 20/80, 40/60, 50/50, 60/40, 80/20 and 100/0) to obtain cast films with acceptable barrier and mechanical properties as replacements for food packaging plastics. Both CNF and CMC improved tensile strength, elongation, UV opacity, air resistance, hydrophobicity (WCA-water contact angle), water vapor transmission rate (WVTR) and oxygen impermeability in pure CNC. WVTR and oxygen permeability were strongly dependent on relative humidity (RH). Interestingly, the greatest effect on WVTR was observed at RH = 90% in films containing CMC in proportions above 60%. CMC- and CNF-containing films had oxygen impermeability up to an RH level of 80% and 60%, respectively. The previous effects were confirmed by food packaging simulation tests, where CMC-containing films proved the best performers. The composite films studied were biodegradable-which constitutes a major environmental related advantage-to an extent proportional to their content in CMC or CNF.

Response Surface Method Based Modeling and Optimization of CMC-g Terpolymer Interpenetrating Network/Bentonite Superabsorbent Composite for Enhancing Water Retention

Water shortages have become a serious issue, so the importance of developing innovative cellulose-based superabsorbent polymer (SAP) was experimentally assessed as an environmentally friendly alternative to acrylate-based SAPs for the optimization of water consumption. The development of a biodegradable superabsorbent hydrogel composite based on a graft copolymer of carboxymethyl cellulose (CMC) and mixtures of different comonomers such as an acrylamide-co-acrylic acid-co-2-acrylamido-2-methylpropanesulfonic acid (Am-co-AA-co-AMPS) CMC-g-TerPoly interpenetrating network was characterized by infrared spectroscopy (FT-IR), scan electron microscopy (SEM), atomic force microscope (AFM), thermal gravimetric analysis (TGA), and swelling capacity in different aqueous media. The optimized CMC-g-(TerPoly) composite showing outstanding superabsorbance with high water retention, the ratio of constituents, temperature, and pH effect on equilibrium swelling have been optimized by using multistage response surface methodology (RSM). In distilled water (d-water), the equilibrium water absorption capacity (EW) of the synthesized composite hydrogels (SAP-IPN1) is 1200 g (d-water/1g hydrogel) which is superior to any other commercial polyacrylate SAP hydrogels, while in saline water the EW is 650 g (s-water/1g hydrogel). The performance of the SAP-IPN for water retention was evaluated by studying several swelling/deswelling cycle measurements. The prepared SAP-IPN hydrogels were found to show pH and salt solution dependence on the swelling behavior. The new SAP-IPN can work with commercial SAP, which is recommended for application as a water reservoir in arid land for irrigation for agriculture purposes.

A Concise Review on Taro Mucilage: Extraction Techniques, Chemical Composition, Characterization, Applications, and Health Attributes

Taro (Colocasia esculenta) is an important source of carbohydrates as an energy source and is used as a staple food throughout the world. It is rich in mucilage and starch granules, making it a highly digestible ingredient. Mucilage can act as a matrix and a thickening, binding, emulsifying, or foaming agent in food, pharmaceutical, and several other fields of research. Moreover, mucilage can be extracted from several living organisms and has excellent functional properties, such as water-holding, oil-holding, and swelling capacities. Therefore, these remarkable functional properties make mucilage a promising ingredient with possible industrial applications. Furthermore, several extraction techniques, including enzyme-assisted, ultrasonication, microwave-assisted, aquatic, and solvent extraction methods, are used to obtain quantitative amounts of taro mucilage. Coldwater extraction with ethanol precipitation can be considered an effective and cost-effective technique to obtain high-quality mucilage with suitable industrial applications, whereas the ultrasonication method is more expensive but results in a higher amount of mucilage than other emerging techniques. Mucilage can also be used as a fat replacer or reducer, dye remover, coating agent, and antioxidating agent. Therefore, in this review, we detail the key properties related to the extraction techniques, chemical composition, and characterization of taro mucilage, along with its suitable applications and health benefits.

Chitosan/pullulan based films incorporated with clove essential oil loaded chitosan-ZnO hybrid nanoparticles for active food packaging

Herein, we developed clove essential oil (CEO) loaded Chitosan-ZnO hybrid nanoparticles (CS-ZnO@CEO (CZC NPs)) integrated chitosan/pullulan (CS/PL) nanocomposite films. SEM images revealed a homogenous distribution of CZC NPs with minimum aggregation in nanocomposite films. The incorporation of CZC NPs led to enhanced tensile strength (~39.82%), film hydrophobicity (~35.36%), UV light blocking ability, water vapor barrier (~84.64%), and oxygen barrier (~57.66%) compared to the bare CS/PL film and overall migration limit of CPCZC films were found below the permitted limit of 1000 μg/dm². Besides, incorporation of CZC NPs into the CS/PL films enhanced antioxidant activity and showed strong antibacterial activity against P. aeruginosa, S. aureus, and E. coli. Also, the CPCZC films displayed potential to extend the shelf-life of chicken meat by up to 5 days when stored at 8 ± 2 °C. These results suggest that the prepared CPCZC films acquire the ideal prerequisites for potential active packaging materials.

Development of Multifunctional Pullulan/Chitosan-Based Composite Films Reinforced with ZnO Nanoparticles and Propolis for Meat Packaging Applications

Pullulan/chitosan-based multifunctional edible composite films were fabricated by reinforcing mushroom-mediated zinc oxide nanoparticles (ZnONPs) and propolis. The ZnONPs were synthesized using enoki mushroom extract and characterized using physicochemical methods. The mushroom-mediated ZnONPs showed an irregular shape with an average size of 26.7 ± 8.9 nm. The combined incorporation of ZnONPs and propolis pointedly improved the composite film's UV-blocking property without losing transparency. The reinforcement with ZnONPs and propolis improved the mechanical strength of the pullulan/chitosan-based film by ~25%. Additionally, the water vapor barrier property and hydrophobicity of the film were slightly increased. In addition, the pullulan/chitosan-based biocomposite film exhibited good antioxidant activity due to the propolis and excellent antibacterial activity against foodborne pathogens due to the ZnONPs. The developed edible pullulan/chitosan-based film was used for pork belly packaging, and the peroxide value and total number of aerobic microorganisms were significantly reduced in meat wrapped with the pullulan/chitosan/ZnONPs/propolis film.

Development of Multifunctional Pullulan/Chitosan-Based Composite Films Reinforced with ZnO Nanoparticles and Propolis for Meat Packaging Applications

Pullulan/chitosan-based multifunctional edible composite films were fabricated by reinforcing mushroom-mediated zinc oxide nanoparticles (ZnONPs) and propolis. The ZnONPs were synthesized using enoki mushroom extract and characterized using physicochemical methods. The mushroom-mediated ZnONPs showed an irregular shape with an average size of 26.7 ± 8.9 nm. The combined incorporation of ZnONPs and propolis pointedly improved the composite film’s UV-blocking property without losing transparency. The reinforcement with ZnONPs and propolis improved the mechanical strength of the pullulan/chitosan-based film by ~25%. Additionally, the water vapor barrier property and hydrophobicity of the film were slightly increased. In addition, the pullulan/chitosan-based biocomposite film exhibited good antioxidant activity due to the propolis and excellent antibacterial activity against foodborne pathogens due to the ZnONPs. The developed edible pullulan/chitosan-based film was used for pork belly packaging, and the peroxide value and total number of aerobic microorganisms were significantly reduced in meat wrapped with the pullulan/chitosan/ZnONPs/propolis film.

Zinc Chloride: Time-Dependent Cytotoxicity, Proliferation and Promotion of Glycoprotein Synthesis and Antioxidant Gene Expression in Human Keratinocytes

Simple Summary

Zinc ions are involved in the biology of cell growth, proliferation, differentiation or apoptosis by regulating many biological molecules, such as transcription factors, enzymes and growth factors. In this study, the time-dependent cytotoxicity, cell proliferation and gene expression in human keratinocytes HaCaT cells were evaluated when exposed to ZnCl₂. The results of this study showed non-cytotoxic effects up to 10 µg/mL after 24 h, no significant effect on cell proliferation when exposed to 5 or 1 µg/mL ZnCl₂ at 72 h and upregulation of eight genes, with great potential in the biomedical field, particularly for regenerative-medicine applications and wound healing.

Abstract

The use of ionic metals such as zinc (Zn²⁺) is providing promising results in regenerative medicine. In this study, human keratinocytes (HaCaT cells) were treated with different concentrations of zinc chloride (ZnCl₂), ranging from 1 to 800 µg/mL, for 3, 12 and 24 h. The results showed a time–concentration dependence with three non-cytotoxic concentrations (10, 5 and 1 µg/mL) and a median effective concentration value of 13.5 µg/mL at a cell exposure to ZnCl₂ of 24 h. However, the zinc treatment with 5 or 1 µg/mL had no effect on cell proliferation in HaCaT cells in relation to the control sample at 72 h. The effects of the Zn²⁺ treatment on the expression of several genes related to glycoprotein synthesis, oxidative stress, proliferation and differentiation were assessed at the two lowest non-cytotoxic concentrations after 24 h of treatment. Out of 13 analyzed genes (superoxide dismutase 1 (SOD1), catalase (CAT), matrix metallopeptidase 1 (MMP1), transforming growth factor beta 1 (TGFB1), glutathione peroxidase 1 (GPX1), fibronectin 1 (FN1), hyaluronan synthase 2 (HAS2), laminin subunit beta 1 (LAMB1), lumican (LUM), cadherin 1 (CDH1), collagen type IV alpha (COL4A1), fibrillin (FBN) and versican (VCAN)), Zn²⁺ was able to upregulate SOD1, CAT, TGFB1, GPX1, LUM, CDH1, FBN and VCAN, with relative expression levels of at least 1.9-fold with respect to controls. We found that ZnCl₂ promoted glycoprotein synthesis and antioxidant gene expression, thus confirming its great potential in biomedicine.

Potentials of polysaccharides, lipids and proteins in biodegradable food packaging applications

Bio-based packaging materials are gaining importance due to their biodegradability, sustainability and environmental friendliness. To control the food quality and improve the food safety standards, proteins polysaccharide and lipid-based packaging films are enriched with bioactive and functional substances. However, poor permeability and mechanical characteristics are the challenging areas in their commercialization. Scientists and researchers are using a combination of techniques i.e. hydrogels, crosslinking, etc. to improve the intermolecular forces between different components of the film formulation to counter these challenges More recently, biodegradable packaging materials, sometimes edible, are also used for the delivery of functional ingredients which reveals their potential for drug delivery to counter the nutrient deficiency problems. This study highlights the potentials of bio-based materials i.e. proteins, polysaccharides, lipids, etc. to develop biodegradable packaging materials. It also explores the additives used to improve the physicochemical and mechanical properties of biodegradable packaging materials. Furthermore, it highlights the novel trends in biodegradable packaging from a food safety and quality point of view.

Entrapment of nano-ZnO into alginate/polyvinyl alcohol beads with different crosslinking ions for fertilizer applications

Zinc oxide nanoparticles (nano-ZnO) are attractive as fertilizer materials but high concentrations may negatively affect the environment. To reduce their dispersion in the environment we entrapped nano-ZnO in biodegradable polymer beads consisting of alginate and polyvinyl alcohol (PVA). The alginate/PVA/ZnO beads were prepared via ionotropic gelation using two different crosslinking ions (Ca²⁺ and Zn²⁺), and the effect of alginate crosslinking ion and PVA content on bead structure, water absorption, water retention and zinc release was investigated. The pure CaAlg and ZnAlg beads demonstrated a poor water absorption and retention, which were strongly enhanced by the incorporation of PVA into the beads. The continuous Zn release was measured in a sand column, and it was found that the Zn-crosslinked beads rapidly released high concentrations of Zn followed by a more gradual Zn release, whereas Ca alginates showed only a gradual Zn release. The Zn dissolution kinetics could be tuned by the crosslinking ion composition. The prepared nano-ZnO-containing alginate/PVA beads may be attractive for Zn fertilizer applications under water-limited conditions.

Recent advances in functionalized nanomaterials for the diagnosis and treatment of bacterial infections

The growing problem of resistant infections due to antibiotic misuse is a worldwide concern that poses a grave threat to healthcare systems. Thus, it is necessary to discover new strategies to combat infectious diseases. In this review, we provide a selective overview of recent advances in the use of nanocomposites as alternatives to antibiotics in antimicrobial treatments. Metals and metal oxide nanoparticles (NPs) have been associated with inorganic and organic supports to improve their antibacterial activity and stability as well as other properties. For successful antibiotic treatment, it is critical to achieve a high drug concentration at the infection site. In recent years, the development of stimuli-responsive systems has allowed the vectorization of antibiotics to the site of infection. These nanomaterials can be triggered by various mechanisms (such as changes in pH, light, magnetic fields, and the presence of bacterial enzymes); additionally, they can improve antibacterial efficacy and reduce side effects and microbial resistance. To this end, various types of modified polymers, lipids, and inorganic components (such as metals, silica, and graphene) have been developed. Applications of these nanocomposites in diverse fields ranging from food packaging, environment, and biomedical antimicrobial treatments to diagnosis and theranosis are discussed.

Nanoporous Sodium Carboxymethyl Cellulose-g-poly (Sodium Acrylate)/FeCl3 Hydrogel Beads: Synthesis and Characterization

Novel sodium carboxymethyl cellulose-g-poly (sodium acrylate)/Ferric chloride (CMC-g-PNaA/FeCl3) nanoporous hydrogel beads were prepared based on the ionic cross-linking between CMC-g-PNaA and FeCl3. The structure of CMC and CMC-g-PNaA were elucidated by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR) spectroscopy, and the elemental composition was analyzed by energy dispersive X-ray analysis (EDX). The physicochemical properties of the CMC-g-PNaA/FeCl3 hydrogel beads were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM) and thermogravimetric analysis (TGA). The swelling percentage of hydrogel beads was studied at different time periods. The obtained CMC-g-PNaA/FeCl3 hydrogel beads exhibited a higher nanoporous morphology than those of CMC-g-PNaA and CMC beads. Furthermore, an AFM image of the CMC-g-PNaA/FeCl3 beads shows granule type topology. Compared to the CMC-g-PNaA (189 °C), CMC-g-PNaA/FeCl3 hydrogel beads exhibited improvement in thermal stability (199 °C). Furthermore, CMC-g-PNaA/FeCl3 hydrogel beads depicted a higher swelling percentage capacity of around 1452%, as compared to CMC-g-PNaA (1096%). Moreover, this strategy with preliminary results could be useful for the development of polysaccharide-based hybrid hydrogel beads for various potential applications.

Designable Carboxymethylpachymaran/Metal Ion Architecture on Sunflower Sporopollenin Exine Capsules as Delivery Vehicles for Bioactive Macromolecules

There are multiple obstacles in the gastrointestinal tract (GIT) for oral administration of bioactive macromolecules. Here, we engineered an oral delivery vehicle (sporopollenin exine capsules with carboxymethylpachymaran (CMP)/metal ion modification) with targeted release based on food-grade ingredients and processing operations. Then, the interaction and binding mechanisms between CMP and metal ions in the vehicle were investigated. By using β-galactosidase (β-Gal) as a model protein, the systems were characterized for the surface morphology and monitored by the in vitro release profile of β-Gal. Notably, the CMP/metal ion systems not only markedly decreased the CMP dosage but also achieved a valid long-term release compared with the previously reported CMP system. Among all the systems, the CMP/3% AlCl₃ system showed the best ability to control the release with the maximum residual activity of β-Gal at nearly 72% after 24 h of treatment. Subsequently, the interaction mechanism between CMP and metal ions within the system was characterized by the perspectives of microstructure, rheological properties, and spectroscopy characteristics. The results indicated that the low pH conditions are conducive to the further cross-linking of CMP and metal ions, resulting in a high gel strength and thus a dense structure, which can impact the controlled release of β-Gal in the GIT. Overall, the system may be utilized in the administration of medical and functional foods, specifically for the delivery of bioactive proteins via the oral route.