Cellulose-based colorimetric sensor with N, S sites for Ag+ detection

Surface-engineered natural fibers: Emerging alternative substrates for chemical sensor applications: A review

Natural fiber has become one of the most widely used alternative materials for chemical sensor fabrication due to its advantages, such as biocompatibility, flexibility, and self-microfluidic properties. Enhanced natural fiber surface has been used as a substrate in colorimetric and electrochemical sensors. This review focuses on improving the natural fiber properties for preparation as a substrate for chemical sensors. Various methods for natural fiber extraction are discussed and compared. Bleaching and decolorization is important for preparation of colorimetric sensors, while carbonization and nanoparticle doping are favorable for increasing their electrical conductivity for electrochemical sensor fabrication. Also, example fabrications and applications of natural fiber-based chemical sensors for chemical and biomarker detection are discussed. The selectivity of the sensors can be introduced and improved by surface modification of natural fiber, such as enzyme immobilization and biorecognition element functionalization, illustrating the adaptability of natural fiber as a smart sensing device, e.g., wearable and portable sensors. Ultimately, the high performances of natural fiber-based chemical sensors indicate the potential uses of natural fiber as a renewable and eco-friendly substrate material in the field of chemical sensors and biosensors for clinical diagnosis and environmental monitoring.

Hydrothermal synthesis of B, S, and N-doped carbon quantum dots for colorimetric sensing of heavy metal ions

In this study, glucose was used as the carbon source to synthesize carbon quantum dots (CQDs) and also aimed to synthesize CQDs doped with heteroatoms such as sulphur, nitrogen, and boron to enhance their functionality. The obtained material has been characterized by several techniques. According to FL analysis, the highest peaks for CQD, N-CQD, B-CQD, and S-CQD were determined as 432 nm (ex 350), 425 (ex 350), 430 nm (ex 340 nm), and 436 nm (ex 340 nm), respectively. FTIR spectra showed different characteristic peaks for CQD, and the FTIR results show that CQDs have a unique structure. According to TEM analysis, the morphology of all CQDs was found to be spherical and monodisperse with average sizes in the range of 5-7 nm. The characterization results of CQDs show that the addition of heteroatoms changes the properties of CQDs. The synthesized CQDs were also tested as colorimetric sensors for the detection of heavy metals. It was observed that CQDs detected Fe3+ metal ions, B-CQD and S-CQD detected Fe3+ and Ag+ metal ions, and N-CQDs detected Ca2+ metal ions. Sensor studies were performed for all CQDs and linear plots were obtained against metal concentrations in the range of 0.06-1.23 μM. LOD values for CQD, N-CQD, S-CQD, and B-CQD were calculated as 0.187 μM (Fe3+), 0.391 μM (Ca2+), 0.224 μM (Fe3+)-0.442 μM (Ag+), and 0.182 μM (Fe3+)-0.174 μM (Ag+), respectively. The results show that the addition of B, N, and S atoms to CQDs plays a role in the improvement and modification of colorimetric sensor properties and has the potential to be used in sensor applications for the detection of heavy metals in areas such as the environment and health.

In situ growth of Ag2S quantum dots on cellulose nanocrystals and their near-infrared bioimaging performance

Elongated nanoparticles show distinct advantages over spherical nanoparticles in bioimaging because of surface area-to-volume, rate of clearance from the body and elimination mechanism. In this work, we investigated the fluorescence emission properties of the hybrid system by decorating silver sulfide quantum dots (Ag2S QDs) in situ on the surface of cellulose nanocrystal (CNC) with unique rod shape, modifiability and biocompatibility. This water-dispersible fluorescent probe has both absorption and fluorescence in near-infrared (NIR) region. By varying the amount of surface ligands, uniformly dispersed Ag2S QDs with different crystalline states but similar sizes were prepared due to the anchoring effect of CNC. The fluorescence quantum yield of fluorescent probes can be improved up to 109-fold (from 0.04 % to 4.36 %). In addition, the CNC-restricted interparticle spacing of Ag2S QDs (< 10 nm), in combination with the overlap of wide fluorescence emission and ultraviolet absorption, significantly enhanced the 1070 nm emission in the NIR-II region via fluorescence resonance energy transfer (FRET). Further conjugation of these CNC probes with folic acid-polyethylene glycol-amino (FA-PEG-NH2) enables in vitro bioimaging of Hela cells, which are potentially applicable for in vivo cancer detection system. The synthetic strategy provides a new way for one-pot preparation of fluorescent probes with both high NIR-I absorption and NIR-II fluorescence.

A quinoline derived Schiff base as highly selective 'turn-on' probe for fluorogenic recognition of Al3+ ion

A quinoline-derived Schiff base QnSb has been synthesized for fluorescent and colorimetric recognition of Al3+ ions in a semi-aqueous medium. The compound QnSb has been characterized by elemental analysis, FT-IR, 1H/13C NMR, UV-Vis and fluorescence spectral techniques. The crystal structure of the QnSb was confirmed by single crystal X-ray diffraction (SC-XRD) analysis. Notably, almost non-fluorescent QnSb served as a 'turn on' responsive probe for Al3+ by inducing a remarkable fluorescence enhancement at 422 nm when excited at 310 nm. The probe QnSb exhibited high selectivity for Al3+ in CH3CN/H2O (4:1, v/v) solution over several competing metal ions (e.g., Mg2+, Pb2+, Zn2+, Cd2+, Co2+, Cu2+, Ca2+, Ni2+, Fe3+/2+, Cr3+, Mn2+, Sn2+, and Hg2+). The limit of detection (LoD) was computed as low as 15.8 nM which is significantly lower than the permissible limit set by WHO for Al3+ ions in drinking water. A 1:1 binding stoichiometry of complex QnSb-Al3+ was established with the help of Job's plot, ESI-MS, NMR and DFT analyses. Based on its remarkable sensing ability, the probe QnSb was utilized to establish molecular logic gates, and the fluorescence detection of Al3+ could clearly be demonstrated on the filter paper test strips.

Nanocellulose-graphene composites: Preparation and applications in flexible electronics

In recent years, the pursuit of high-performance nano-flexible electronic composites has led researchers to focus on nanocellulose-graphene composites. Nanocellulose has garnered widespread interest due to its exceptional properties and unique structure, such as renewability, biodegradability, and biocompatibility. However, nanocellulose materials are deficient in electrical conductivity, which limits their applications in flexible electronics. On the other hand, graphene boasts remarkable properties, including a high specific surface area, robust mechanical strength, and high electrical conductivity, making it a promising carbon-based nanomaterial. Consequently, research efforts have intensified in exploring the preparation of graphene-nanocellulose flexible electronic composites. Although there have been studies on the application of nanocellulose and graphene, there is still a lack of comprehensive information on the application of nanocellulose/graphene in flexible electronic composites. This review examines the recent developments in nanocellulose/graphene flexible electronic composites and their applications. In this review, the preparation of nanocellulose/graphene flexible electronic composites from three aspects: composite films, aerogels, and hydrogels are first introduced. Next, the recent applications of nanocellulose/graphene flexible electronic composites were summarized including sensors, supercapacitors, and electromagnetic shielding. Finally, the challenges and future directions in this emerging field was discussed.

Colorimetric Detection of Cu2+ and Ag+ Ions Using Multi-Responsive Schiff Base Chemosensor: A Versatile Approach for Environmental Monitoring

In this study, we have synthesized a novel Schiff base-centered chemosensor, designated as SB, with the chemical name ((E)-1-(((6-methylbenzo[d]thiazol-2-yl) imino)methyl)naphthalen-2-ol). This chemosensor was structurally characterized by FT-IR, 1H NMR, UV-Vis and fluorescence spectroscopy. After structural characterization the chemosensor SB was subsequently employed for the detection of Cu2+ and Ag+, using fluorescence spectroscopy. The chemosensor SB showed excellent ability to recognize the target metal ions, leading to fluorescence enhancement and color change from yellow to yellowish orange for Cu2+ and yellow to radish for Ag+ ions. The detection capabilities of this chemosensor were impressive, showing excellent selectivity and an exceptionally low detection limit of 0.0016 µM for Cu2+ and 0.00389 µM for Ag+. Most notably, our approach enables the quantitative detection both metal ions in different water and soil samples at trace level. This achievement holds great promise for analytical applications and offers significant contributions to the field of chemical sensing and environmental protection.

A Review on Organic Fluorimetric and Colorimetric Chemosensors for the Detection of Ag(I) Ions

Organic compounds display several electronic and structural features which enable their application in various fields, ranging from biological to non-biological. These compounds contain heteroatoms like sulfur, nitrogen and oxygen, which provide coordination sites to act as ligands in the field of coordination chemistry and are used as chemosensors to detect various metal ions. This review article covers different organic compounds including thiourea, Schiff base, pyridine, thiophene, coumarin, triazolyl pyrenes, imidazole, fluorescein, thiazole, tricarbocyanine, rhodanine, porphyrin, hydrazone, benzidine and other functional groups based chemosensors, that contain heteroatoms like sulfur, nitrogen and, oxygen for fluorimetric and colorimetric detection of Ag+ in different environmental, agricultural, and biological samples. Further, the sensing mechanism and performances of these chemosensors have been discussed, which could help the readers for the future design of highly efficient, selective, and sensitive chemosensors for the detection and determination of Ag+ ions.

A Review on Organic Colorimetric and Fluorescent Chemosensors for the Detection of Zn(II) Ions

Organic compounds display several electronic and structural features which enable their application in various fields, ranging from biological to non-biological. These compounds contain heteroatoms like sulfur, nitrogen and, oxygen, which provide coordination sites to act as ligands in the field of coordination chemistry and are used as chemosensors to detect various metal ions. This review article covers different organic compounds including Schiff bases, thiourea, pyridine, rhodamine, triazole, pyrene, coumarin, imidazole, diaminomaleonitrile, naphthoxazole, pyrimidine, thiophene, thioether, and other functional groups based chemosensors that contain heteroatoms like sulfur, nitrogen and, oxygen for fluorimetric and colorimetric detection of Zn(II) ions in different environmental, agricultural, and biological samples. Further, the sensing performances of these chemosensors have been compared and discussed which could help the readers for the future design of organic fluorescent and colorimetric chemosensors for the detection of Zn(II) ions. We hope this study will support the new thoughts to design a simple, efficient, selective, and sensitive chemosensor for the detection of Zn(II) ions in different samples (environmental, agricultural, and biological).

Nanobioengineered Sensing Technologies Based on Cellulose Matrices for Detection of Small Molecules, Macromolecules, and Cells

Recent advancement has been accomplished in the field of biosensors through the modification of cellulose as a nano-engineered matrix material. To date, various techniques have been reported to develop cellulose-based matrices for fabricating different types of biosensors. Trends of involving cellulosic materials in paper-based multiplexing devices and microfluidic analytical technologies have increased because of their disposable, portable, biodegradable properties and cost-effectiveness. Cellulose also has potential in the development of cytosensors because of its various unique properties including biocompatibility. Such cellulose-based sensing devices are also being commercialized for various biomedical diagnostics in recent years and have also been considered as a method of choice in clinical laboratories and personalized diagnosis. In this paper, we have discussed the engineering aspects of cellulose-based sensors that have been reported where such matrices have been used to develop various analytical modules for the detection of small molecules, metal ions, macromolecules, and cells present in a diverse range of samples. Additionally, the developed cellulose-based biosensors and related analytical devices have been comprehensively described in tables with details of the sensing molecule, readout system, sensor configuration, response time, real sample, and their analytical performances.

A bi-modal, cellulose-based sensor for fluorometric detection of Fe(III) and antimicrobial studies of its silver-loaded form

The study reports designing of a new, low-cost and environmentally friendly colorimetric and fluorometric sensor by using cellulose-based materials for detection and determination of Fe(III). To make powder cellulose (Cel) and filter paper (PCel) fluorescent, they were modified with hexamethylene diisocyanate (HMDI) and 4-sulfo-1,8-naphthalimide (Nap). Fluorescent Cel-Nap and PCel-Nap materials were used for spectroscopic detection of Fe(III). The working range of the designed sensor was determined as 1.0 × 10^-5-4.5 × 10^-5 M with a low limit of detection (LOD) (7.51 μM). Antimicrobial properties of cel-based compounds and Ag(I)-containing compounds were tested against five bacteria; Bacillus cereus, Streptococcus mutans, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and two fungi; Candida albicans and Candida tropicalis. The materials exhibited antimicrobial effects and their antifungal properties were more effective than their antibacterial properties.

Selective determination of Ag+ in the presence of Cd2+, Hg2+ and Cu2+ based on their different interactions with gold nanoclusters

In this work, a fluorescence method was developed for selective detection of Ag⁺ in the presence of Cd²⁺, Hg²⁺, and Cu²⁺ based on gold nanoclusters (AuNCs). That is, bovine serum albumin (BSA) templated AuNCs with double emission peaks were synthesized using BSA as a protective agent. AuNCs with uniform distribution and average size between 2.0 and 2.2 nm were synthesized using a green and simple method, and showed bright orange-red fluorescence under ultraviolet light. AuNCs have two emission peaks at 450 nm and 630 nm with an excitation wavelength of 365 nm. Under alkaline conditions, Cd²⁺ can combine with the surface sulfhydryl groups of BSA–AuNCs to form Cd–S bonds, which cause AuNCs to aggregate, resulting in an increase in fluorescence intensity at 630 nm. Conversely, due to the d¹⁰–d¹⁰ metal affinity interaction, the addition of Hg²⁺ can reduce the fluorescence peak at 630 nm. Ag⁺ was reduced to Ag⁰ by gold nuclei in AuNCs, forming a stable hybrid Au@ AgNCs species with blue-shifted and enhanced fluorescence. Finally, the paramagnetic behavior of Cu²⁺ combined with BSA causes the excited electrons of the gold cluster to lose their energy via ISC, eventually leading to simultaneous quenching of the two emission peaks. The results show that the limit of detection (LOD) of Ag⁺, Hg²⁺, Cd²⁺ and Cu²⁺ is 1.19 μM, 3.39 μM, 1.83 μM and 5.95 μM, respectively.

A fluorescence method was developed for selective detection of Ag⁺ in the presence of Cd²⁺, Hg²⁺, and Cu²⁺ based on gold nanoclusters. The limit of detection for Ag⁺, Hg²⁺, Cd²⁺ and Cu²⁺ is 1.19 μM, 3.39 μM, 1.83 μM and 5.95 μM, respectively.