Batch and dynamic adsorption of lysozyme from chicken egg white on dye-affinity nanofiber membranes modified by ethylene diamine and chitosan

Preparation and characterization of lysozyme loaded cryogel for heavy metal removal

In the present study, monolithic poly(N-isopropylacrylamide-acrylamide)-acrilic acid (poly(npam-aam)-aac) cryogels were made. Swelling tests, SEM, XRD, and ATR-FTIR analyses revealed distinct cryogel and lysozyme-loaded cryogel properties. The equilibrium swelling degree was 6.2 g H2O/g cryogel. The created poly(npam-aam)-aac with pores of 10-100 μm was obviously seen in SEM images. Lysozyme adsorption capacity on poly(npam-aam)-aac was found to be 260 mg/g at pH 7.4 and 40 °C. After that, we used lysozyme adsorbed cryogel for the removal of the model heavy metal ion (cadmium). A series of pH, duration, and ionic strengths were used to conduct Cd2+ adsorption experiments. The results showed that the new adsorbent had a considerable chemical affinity for Cd2+ ions in its ability to bind them under eye ocular conditions (pH 7.4, 32-36 °C, 0,15 M NaCl). The traditional Langmuir adsorption model was the most suitable, achieving maximum uptake of ∼185 mg/g. Chemical adsorption was found to be the rate-controlling step, and the process was also compatible with the pseudo-second-order model. For the treatment of ocular pathologies, the most effective enzyme, lysozyme, must show its function. That is why there is a need for using lysozyme, and lysozyme is selected as a lignad to adsorb heavy metal ions because of its high heavy metal binding affinity. This material could be used for the treatment of ocular pathologies in the future.

Reactive Green 19 dye-ligand immobilized on the aminated nanofiber membranes for efficient adsorption of lysozyme: Process development and optimization in batch and flow systems

The performance of lysozyme adsorption by the aminated nanofiber membrane immobilized with Reactive Green 19 (RG19) dyes was evaluated in batch and flow systems. The physicochemical properties of the dye-immobilized nanofiber membrane were characterized. The parameters of batch-mode adsorption of lysozyme (e.g., pH, initial dye concentration, and lysozyme concentration) were optimized using the Taguchi method. In a flow process, the factors influencing the dynamic binding performance for lysozyme adsorption in the chicken egg white (CEW) solution include immobilized dye concentration, adsorption pH value, feed flow rate, and feed CEW concentration. The impact of these operating conditions on the lysozyme purification process was investigated. Under optimal conditions, the recovery yield and purification factor of lysozyme achieved from the one-step adsorption process were 98.52% and 143 folds, respectively. The dye-affinity nanofiber membrane also did not exhibit any significant loss in its binding capacity and purification performance after five consecutive uses.

Effect of the Structure of Magnetic Nanocomposite Adsorbents on the Lysozyme Separation Efficiency

In this study, we prepared various anionic magnetic adsorbents through the carboxyl functionalization of core/shell-structured Fe₃O₄/SiO₂ (FS) particles by either succinic anhydride (FSC), low-molecular-weight (MW 1800) polyacrylic acid (PAA) (FSP1), or high-molecular-weight (MW 100,000) PAA (FSP2), and then, investigated the effect of the structure of adsorbents and operational parameters on their performance for the lysozyme separation. The type and size of functional molecules have significant effects on the surface concentration of functional carboxyl groups onto the adsorbent particles (increase in the order of FSP2 > FSP1 > FSC), and consequently on the adsorption efficiency (AE) (∼100, 98, and 62%, respectively) and adsorption capacity (AC) (∼1000, 980, and 621 mg·g^-1, respectively) of the adsorbents. However, the loss of the antibacterial activity of separated lysozyme molecules due to the molecular conformational change increased in the order of FSP2 > FSP1 = FSC, as compared to the free lysozyme. The application of basic buffer solutions for the elution of adsorbed enzyme molecules resulted in more adverse effects on the enzyme activity. The obtained results recommend that FSP1 can be used as a suitable anionic adsorbent for the isolation of positively charged proteins, owing to its high adsorption capacity, excellent reusability, and structural stability, as well as the high purity, structural stability, and activity recovery of the isolated proteins.

Protein Adsorption Performance of a Novel Functionalized Cellulose-Based Polymer

Dicarboxymethyl cellulose (DCMC) was synthesized and tested for protein adsorption. The prepared polymer was characterized by inductively coupled plasma atomic emission spectrometry (ICP-AES), attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR) and solid state nuclear magnetic resonance (ssNMR) to confirm the functionalization of cellulose. This work shows that protein adsorption onto DCMC is charge dependent. The polymer adsorbs positively charged proteins, cytochrome C and lysozyme, with adsorption capacities of 851 and 571 mg g^-1, respectively. In both experiments, the adsorption process follows the Langmuir adsorption isotherm. The adsorption kinetics by DCMC is well described by the pseudo second-order model, and adsorption equilibrium was reached within 90 min. Moreover, DCMC was successfully reused for five consecutive adsorption-desorption cycles, without compromising the removal efficiency (98-99%).

Studies of Protein Wastes Adsorption by Chitosan-Modified Nanofibers Decorated with Dye Wastes in Batch and Continuous Flow Processes: Potential Environmental Applications

In this study, reactive green 19 dye from wastewater was immobilized on the functionalized chitosan nanofiber membranes to treat soluble microbial proteins in biological wastewater. Polyacrylonitrile nanofiber membrane (PAN) was prepared by the electrospinning technique. After heat treatment, alkaline hydrolysis, and chemically grafted with chitosan to obtain modified chitosan nanofibers (P-COOH-CS), and finally immobilized with RG19 dye, dyed nanofibers were generated (P-COOH-CS-RG19). The synthesis of P-COOH-CS and P-COOH-CS-RG19 are novel materials for protein adsorption that are not deeply investigated currently, with each of the material functions based on their properties in significantly improving the adsorption efficiency. The nanofiber membrane shows good adsorption capacity and great recycling performance, while the application of chitosan and dye acts as the crosslinker in the nanofiber membrane and consists of various functional groups to enhance the adsorption of protein. The dyed nanofibers were applied for the batch adsorption of soluble protein (i.e., lysozyme), and the process parameters including chitosan’s molecular weight, coupling pH, chitosan concentration, dye pH, dye concentration, and lysozyme pH were studied. The results showed that the molecular weight of chitosan was 50 kDa, pH 5, concentration 0.5%, initial concentration of dye at 1 mg/mL dye and pH 12, lysozyme solution at 2 mg/mL at pH 8, and the maximum adsorption capacity was 1293.66 mg/g at a temperature of 318 K. Furthermore, thermodynamic, and kinetic studies suggested that the adsorption behavior of lysozyme followed the Langmuir adsorption isotherm model and the pseudo-second-order kinetic model. The optimal adsorption and desorption conditions based on batch experiments were directly applied to remove lysozyme in a continuous operation. This study demonstrated the potential of dyed nanofibers as an efficient adsorbent to remove approximately 100% of lysozyme from the simulated biological wastewater.

Utilization of a double-cross-linked amino-functionalized three-dimensional graphene networks as a monolithic adsorbent for methyl orange removal: Equilibrium, kinetics, thermodynamics and artificial neural network modeling

Herein, it is aimed to develop a high-performance monolithic adsorbent to be utilized in methyl orange (MO) adsorption. Therefore, amino-functionalized three-dimensional graphene networks (3D-GN_f) fulfilling the requirements of reusability and high capacity have been fabricated via hydrothermal self-assembly approach followed by a double-crosslinking strategy. The potential utilization of 3D-GN_f as an adsorbent for removal MO has been assessed using both batch-adsorption studies and an artificial neural network (ANN) approach. Graphene oxide sheets have been amino-functionalized and cross-linked, by ethylenediamine (EDA) during hydrothermal treatment, following the glutaraldehyde has used as a double-crosslinking agent to facilitate the crosslinking of architecture. The successful fabrication of 3D-GN_f has been confirmed by field-emission scanning electron microscopy (FESEM), Fourier transform infrared (FT-IR), Raman and X-ray photoelectron spectroscopy (XPS). Moreover, N₂ adsorption/desorption isotherms have revealed the high specific surface area (1015 m² g^-1) with high pore volume (1.054 cm³ g^-1) and hierarchical porous structure of 3D-GN_f. The effect of initial concentration, contact time, and temperature on adsorption capacity have been thoroughly studied, and the kinetics, isotherms, and thermodynamics of MO adsorption have been modelled. The MO adsorption has been well defined by the pseudo-second-order kinetic model and Langmuir isotherm model with a monolayer adsorption capacity of 270.27 mg g^-1 at 25 °C. The thermodynamic findings have revealed MO adsorption has occurred spontaneously with an endothermic process. The Levenberg-Marquardt backpropagation algorithm has been implemented to train the ANN model, which has used the activation functions of tansig and purelin functions at the hidden and output layers, respectively. An optimum ANN model with high-performance metrics (coefficient of determination, R² = 0.9995; mean squared error, MSE = 0.0008) composed of three hidden layers with 5 neurons in each layer was constructed to forecast MO adsorption. The findings have shown that experimental results are consistent with ANN-based data, implying that the suggested ANN model may be used to forecast cationic dye adsorption.

Kinetic and Thermodynamic Studies of Lysozyme Adsorption on Cibacron Blue F3GA Dye-Ligand Immobilized on Aminated Nanofiber Membrane

The polyacrylonitrile (PAN) nanofiber membrane was prepared by the electrospinning technique. The nitrile group on the PAN nanofiber surface was oxidized to carboxyl group by alkaline hydrolysis. The carboxylic group on the membrane surface was then converted to dye affinity membrane through reaction with ethylenediamine (EDA) and Cibacron Blue F3GA, sequentially. The adsorption characteristics of lysozyme onto the dye ligand affinity nanofiber membrane (namely P-EDA-Dye) were investigated under various conditions (e.g., adsorption pH, EDA coupling concentration, lysozyme concentration, ionic strength, and temperature). Optimum experimental parameters were determined to be pH 7.5, a coupling concentration of EDA 40 μmol/mL, and an immobilization density of dye 267.19 mg/g membrane. To understand the mechanism of adsorption and possible rate controlling steps, a pseudo first-order, a pseudo second-order, and the Elovich models were first used to describe the experimental kinetic data. Equilibrium isotherms for the adsorption of lysozyme onto P-EDA-Dye nanofiber membrane were determined experimentally in this work. Our kinetic analysis on the adsorption of lysozyme onto P-EDA-Dye nanofiber membranes revealed that the pseudo second-order rate equation was favorable. The experimental data were satisfactorily fitted by the Langmuir isotherm model, and the thermodynamic parameters including the free energy change, enthalpy change, and entropy change of adsorption were also determined accordingly. Our results indicated that the free energy change had a negative value, suggesting that the adsorption process occurred spontaneously. Moreover, after five cycles of reuse, P-EDA-Dye nanofiber membranes still showed promising efficiency of lysozyme adsorption.

A decade development in the application of chitosan-based materials for dye adsorption: A short review

The presence of dyes in the aquatic environment as a result of anthropogenic activities, especially textile industries, is a critical environmental challenge that hinders the availability of potable water. Different wastewater treatment approaches have been used to remediate dyes in aquatic environments; however, most of these approaches are limited by factors ranging from high cost to the incomplete removal of the dyes and contaminants. Thus, the use of adsorption as a water treatment technology to remove dyes and other contaminants has been widely investigated using different adsorbents. This study evaluated the significance of chitosan as a viable adsorbent for removing dyes from water treatment. We summarised the literature and research results obtained between 2009 and 2020 regarding the adsorption of dyes onto chitosan and modified chitosan-based adsorbents prepared through physical and chemical processing, including crosslinking impregnation, grafting, and membrane preparation. Furthermore, we demonstrated the effects of various chitosan-based materials and modifications; they all improve the properties of chitosan by promoting the adsorption of dyes. Hence, the application of chitosan-based materials with various modifications should be considered a cutting-edge approach for the remediation of dyes and other contaminants in aquatic environments toward the global aim of making potable water globally available.

Magnetoelastic Immunosensor via Antibody Immobilization for the Specific Detection of Lysozymes

Lysozymes in human urine have crucial clinical significance as an indicator of renal tubular and glomerular diseases. Most lysozyme detection methods rely on the enzyme-linked immunosorbent assay (ELISA), which is usually a tedious procedure. Meanwhile, aptamer sensors and fluorescence-based techniques for lysozyme detection have emerged in recent studies. However, these methods are time-consuming and highly complex in operation, and some even require exorbitant reagents and instruments, which restricts real-time clinical monitoring as diagnostic approaches. Therefore, a rapid and low-cost lysozyme detection method with facile preparation is still in demand for modern precision medicine. Herein, we propose a magnetoelastic (ME) immunosensor for lysozyme detection by detecting changes in resonance frequency under a magnetostrictive effect. The detection system is composed of a magnetoelastic chip with an immobilized lysozyme antibody, a solenoid coil, and a vector network analyzer. Since the ME sensor is ultrasensitive to mass change, the frequency offset caused by mass change can be utilized to detect the content of lysozyme. The immunosensor is evaluated to possess superior sensitivity of 138 Hz/μg mL^-1 in terms of the resonance frequency shift (RFS). In addition, our sensor displays an outstanding performance in specificity experiments and shows a relatively lower detection limit (1.26 ng/mL) than other conventional lysozyme detection methods (such as ELISA, chemiluminescence assay, fluorescence, and aptamer biosensors).

Selective Adsorption and Separation of Proteins by Ligand-Modified Nanofiber Fabric

Electrospun polyvinyl alcohol (PVA) nanofiber fabric was modified by Cibacron Blue F3GA (CB) to enhance the affinity of the fabric. Batch experiments were performed to study the nanofiber fabric's bovine hemoglobin (BHb) adsorption capacity at different protein concentrations before and after modification. The maximum BHb adsorption capacity of the modified nanofiber fabric was 686 mg/g, which was much larger than the 58 mg/g of the original fabric. After that, the effect of feed concentration and permeation rate on the dynamic adsorption behaviors for BHb of the nanofiber fabric was investigated. The pH impact on BHb and bovine serum albumin (BSA) adsorption was examined by static adsorption experiments of single protein solutions. The selective separation experiments of the BHb-BSA binary solution were carried out at the optimal pH value, and a high selectivity factor of 5.45 for BHb was achieved. Finally, the reusability of the nanofiber fabric was examined using three adsorption-elution cycle tests. This research demonstrated the potential of the CB-modified PVA nanofiber fabric in protein adsorption and selective separation.

Adsorption and purification performance of lysozyme from chicken egg white using ion exchange nanofiber membrane modified by ethylene diamine and bromoacetic acid

A high-performance polyacid ion exchange (IEX) nanofiber membrane was used in membrane chromatography for the recovery of lysozyme from chicken egg white (CEW). The polyacid IEX nanofiber membrane (P-BrA) was prepared by the functionalization of polyacrylonitrile (PAN) nanofiber membrane with ethylene diamine (EDA) and bromoacetic acid (BrA). The adsorption performance of P-BrA was evaluated under various operating conditions using Pall filter holder. The results showed that optimal conditions of IEX membrane chromatography for lysozyme adsorption were 10% (w/v) of CEW, pH 9 and 0.1 mL/min. The purification factor and yield of lysozyme were 402 and 91%, respectively. The adsorption process was further scaled up to a larger loading volume, and the purification performance was found to be consistent. Furthermore, the regeneration of IEX nanofiber membrane was achieved under mild conditions. The adsorption process was repeated for five times and the adsorption capacity of adsorber was found to be unaffected.

Recent advances in protein chromatography with polymer-grafted media

The strategy of using polymer-grafted media is effective to create protein chromatography of high capacity and uptake rate, giving rise to an excellent performance in high-throughput protein separation due to its high dynamic binding capacity. Taking the scientific development and technological innovation of protein chromatography as the objective, this review is devoted to an overview of polymer-grafted media reported in the last five years, including their fabrication routes, protein adsorption and chromatography, mechanisms behind the adsorption behaviors, limitations of polymer-grafted media and chromatographic operation strategies. Particular emphasis is placed on the elaboration and discussion on the behaviors of ion-exchange chromatography (IEC) with polymer-grafted media because IEC is the most suitable chromatographic mode for this kind of media. Recent advances in both the theoretical and experimental investigations on polymer-grafted media are discussed by focusing on their implications to the rational design of novel chromatographic media and mobile phase conditions for the development of high-performance protein chromatography. It is concluded that polymer-grafted media are suitable for development of IEC and mixed-mode chromatography with charged and low hydrophobic ligands, but not for hydrophobic interaction chromatography with high hydrophobic ligands and affinity chromatography with ligands that have single binding site on the protein.

Removal of dye waste by weak cation-exchange nanofiber membrane immobilized with waste egg white proteins

In this research, a protein nanofiber membrane (P-COOH-CEW) was developed to treat the dye waste. Initially, polyacrylonitrile nanofiber membrane (PAN) was prepared by electrospinning, followed by heat treatment, alkaline treatment, and neutralization to obtain weak cation exchange nanofiber membrane (P-COOH). The P-COOH membrane was chemically coated with chicken egg white (CEW) proteins to obtain a 3D structure of complex protein nanofiber membrane (P-COOH-CEW). The composite prepared was characterized with Fourier Transform Infrared analysis (FTIR), Scanning Electron Microscopy (SEM), and thermogravimetric analysis (TGA). Further, the composite was evaluated by investigating the removal of Toluidine Blue O (TBO) from aqueous solutions in batch conditions. Different operating parameters - coupling of CEW, shaking rate, initial pH, contact time, temperature, and dye concentration were studied. From the results, maximum removal capacity and equilibrium association constant was determined to be 546.24 mg/g and 10.18 mg/mg, respectively at pH 10 and 298 K. The experimental data were well fitted to pseudo-second order model. Furthermore, desorption studies revealed that the adsorbed TBO can be completely eluted by using 50% ethanol or 50% glycerol in 1 M NaCl solution. Additionally, the reuse of P-COOH-CEW membrane reported to have 97.32% of removal efficiency after five consecutive adsorption/desorption cycles.