Arginine-modified magnetic chitosan: Preparation, characterization and adsorption of gallic acid in sugar solution

Synthesis of a pH/temperature bi-response gallic acid magnetic imprinted polymer for extracting natural product from Galla chinensis

A pH/temperature bi-responsive gallic acid magnetic imprinted polymer (PTBG-MIP) was synthesized on a Fe3O4@SiO2@KH570 carrier using methacrylic acid (MAA), p-Vinylphenylboronic acid (p-VPBA), and N-isopropyl-acrylamide (NIPAAm) as complex functional monomers. The density functional theory (DFT) was employed to optimize the molar ratio of multi-functional monomers-template complex, which proved to be an effective tool for predicting complex configuration based on electrostatic potential (ESP) analysis and the lowest binding energy. DFT calculation and analysis determined the optimized molar ratio of 2:1:1:1 for GA-MAA-NIPAAm-p-VPBA, which showed good agreement with experimental results. The PTBG-MIP-4 obtained under the optimized conditions exhibited high pH- and temperature- dependence in rebinding the template, displaying a maximum adsorption capacity (Qe) of 62.26 mg g-1 and a highest selection factor (α) of 5.217. Additionally, the PTBG-MIP-4 exhibited exceptional physicochemical properties encompassing magnetization characteristics, morphology, surface sites distribution, and adsorption performance. The application efficiency of this imprinted composite in the extraction and purification of gallic acid from Galla chinensis was remarkably demonstrated.

Bisphenol A adsorption using modified aloe vera leaf-wastes derived bio-sorbents from aqueous solution: kinetic, isotherm, and thermodynamic studies

Reactive-oxygen-species are produced more often in the body when bisphenol A (BPA), an endocrine-disrupting-substance, is present. In this investigation, bio-sorbents from an aqueous solution adapted from Aloe-vera were used to survey BPA removal. Aloe-vera leaf wastes were used to create activated carbon, which was then analyzed using Fourier transform infrared (FTIR), Field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), Thermogravimetric analysis (TGA), Zeta potential, and Brunauer-Emmett-Teller (BET) techniques. It was revealed that the adsorption process adheres to the Freundlich isotherm model with R2>0.96 and the pseudo-second-order kinetic model with R2>0.99 under ideal conditions (pH = 3, contact time = 45 min, concentration of BPA = 20 mg.L-1, and concentration of the adsorbent = 2 g.L-1). After five-cycle, the efficacy of removal was greater than 70%. The removal of phenolic-chemicals from industrial-effluent can be accomplished with the assistance of this adsorbent in a cost-effective and effective-approach.

Unlocking the Potential of Chemically Modified Carbon Gels in Gallic Acid Adsorption

This study deals with the preparation of adsorbents from a commercial xerogel by chemically modifying its surface with concentrated mineral acids and alkali metal chlorides, their physicochemical characterization, and their use as adsorbents for gallic acid in aqueous solution. Although there are publications on the use of carbon xerogels as adsorbents, we propose and study simple modifications that can change their chemical properties and, therefore, their performance as adsorbents. The adsorbate of choice is gallic acid and, to our knowledge, there is no history of its adsorption with carbon xerogels. The prepared adsorbents have a high specific surface area (347-563 m2 g-1), better pore development for samples treated with alkali metal chlorides than with mineral acids, and are more acidic than the initial xerogel (p.z.c range 2.49-6.87 vs. 7.20). The adsorption equilibrium is reached in <16 h with a kinetic constant between 0.018 and 0.035 h-1 for the pseudo-second-order model. The adsorption capacity, according to the Langmuir model, reaches 62.89 to 83.33 mg g-1. The adsorption properties of the commercial xerogel improved over a wide range of pH values and temperatures. The experimental results indicate that the adsorption process is thermodynamically favored.

Magnetic hydrochar grafted-chitosan for enhanced efficient adsorption of malachite green dye from aqueous solutions: Modeling, adsorption behavior, and mechanism analysis

Water pollution by organic dyes is one of the most serious environmental problems worldwide. Malachite green (MG) is considered as one the serious organic dyes which is discharged in wastewater by leather and textile manufacturing plants. MG dye can cause severe hazards to the environment and human health. Therefore, the removal of MG dye from wastewater is very important and essential. This study aims to synthesize a new magnetic hydrochar grafted to chitosan (MWSHC@CS) for the removal of MG dye from the aqueous solutions. Transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) surface area, and Zeta potential analysis were used to characterize the synthesized MWSHC@CS. Batch experiments were conducted to optimize MG dye adsorption conditions, including adsorbent mass, pH, temperature, initial concentration, and contact time. The results revealed that MWSHC@CS had an excellent removal efficiency (96.47 %) for MG dye at the optimum condition (at m: 20 mg, pH: 7.5, t: 420 min, and T: 298 K). Adsorption isotherms outcomes revealed the MG adsorption data were best fit by the Langmuir model with a maximum adsorption capacity (420.02 mg/g). Adsorption kinetics outcomes exhibited that the adsorption process of MG dye fitted well to the Elovich model. The thermodynamic results revealed that the adsorption process was physical, exothermic, and spontaneous. The adsorption mechanisms of MG onto MWSHC@CS were hydrogen bonding, electrostatic interaction, and π-π interactions. Furthermore, MWSHC@CS showed excellent reusability for the removal of MG over five cycles of adsorption-desorption (83.76 %). In conclusion, the study provides a new, low-cost, and effective magnetic nanocomposite based on chitosan as a promising adsorbent for the high-performance removal of MG dye from aqueous solutions.

Phenylboronic Acid and Amino Bifunctional Modified Adsorbent for Quickly Separating Phenolic Acids from Crude Extract of Clerodendranthus spicatus and Evaluation of Their Antioxidant and Hypoglycemic Activities

A novel phenylboronic acid and amino bifunctional modified silica gel (SiO2-NH2-FPBA) was prepared, which was 30-80 μm, had a pore size of 8.69 nm, a specific surface area of 206.89 m2/g, was stable at low temperature, and contained 0.4793 mmol/g of the phenylboronic acid group and 1.6377 mmol/g of the amino group. It was used to develop a rapid separation method for phenolic acids. The results showed that it could adsorb 93.64 mg/g caffeic acid, 89.35 mg/g protocatechuic acid and 79.66 mg/g gallic acid. The adsorption process was consistent with the pseudo-second-order model (R2 > 0.99), and fitted the Langmuir isotherm model well (R2 > 0.99). CH3COOH could effectively desorb phenolic acids (>90%) and did not destroy their structures. When SiO2-NH2-FPBA was added to crude extract of Clerodendranthus spicatus, 93.24% of the phenolic acids could be captured, and twenty-two kinds of phenolic acids were identified by Q Exactive HF LC-MS. Furthermore, the isolated phenolic acids from Clerodendranthus spicatus possessed great DPPH, ABTS, and hydroxyl radicals scavenging activities and ferric reducing power. They also demonstrated effective inhibition of α-amylase and α-glucosidase activities (IC50 = 110.63 ± 3.67 μg/mL and 64.76 ± 0.30 μg/mL, respectively). The findings indicate that SiO2-NH2-FPBA has significant potential in practical applications of separating active constituents from natural resources.

(3-Chloro-2-hydroxypropyl) trimethylammonium chloride and polyethyleneimine co-modified pomelo peel cellulose-derived aerogel for remelt syrup decolorization in sugar refining

The crucial need for quality refined sugar has led to the development of advanced adsorbents, with a focus on the decolorization of remelt syrup. In this study, (3-chloro-2-hydroxypropyl) trimethylammonium chloride and polyethyleneimine co-modified pomelo peel cellulose-derived aerogel (CP-PPA) was fabricated, and synthetic melanoidins were used as model colorants of remelt syrup to evaluate the validity and practicality of CP-PPA for eliminating colored impurities. Integrating abundant amine-functionalized groups (quaternary ammonium and protonated amine) within the pomelo peel-derived aerogel directionally captured electronegative melanoidins via electrostatic interactions. Furthermore, the active sites, types, and relative strength of the weak interactions between CP-PPA and melanoidins were determined using density functional theory simulations. CP-PPA exhibited an excellent equilibration adsorbing capacity for capturing melanoidins of 749.51 mg/g, and a removal efficiency of 93.69 %. Additionally, the adsorption mechanism was thoroughly examined in an effort to improve the economy of the sugar refinement industry.

A magnetic MIL-125-NH2@chitosan composite as a separable adsorbent for the removal of Cr(VI) from wastewater

Metal-organic frameworks (MOFs) are gradually used since of their huge specific surface area and superior pore structure. However, there are problems such as easy aggregation and difficult separation in water treatment. In this study, we prepared composite microspheres (FMCS-1) by modifying MIL-125-NH₂ with Fe₃O₄ and chitosan. The structural characterization and performance analysis of the materials showed that the introduction of chitosan effectively prevents the stacking of MOFs. The magnetic test manifested that Fe₃O₄ solved the problem of the difficult separation of MOFs from water. The removal potential of toxic Cr(VI) was tested by adsorption experiments. The isotherm model indicated that FMCS-1 is a single molecular layer adsorbent with a maximum adsorption capacity of 109.46 mg/g at pH = 2. The adsorption kinetics showed that the adsorption of Cr(VI) by FMCS-1 was chemical adsorption. The acid resistance test demonstrated that FMCS-1 can exist stably in acid solutions. The recycling experiments proved that the adsorbent can be reused and the removal percentage still reaches 50 % after 5 cycles. This work expands the application of MOFs in water treatment and also provides an effective adsorbent for Cr(VI) removal.

Copper-doped carbon dots with enhanced Fenton reaction activity for rhodamine B degradation

The Fenton reaction has attracted extensive attention due to its potential to be a highly efficient and environmentally friendly wastewater treatment technology. Noble copper-doped carbon dots (CuCDs) are prepared through a simple one-step hydrothermal method with 3,4-dihydroxyhydrocinnamic acid, 2,2'-(ethylenedioxy)bis(ethylamine) and copper chloride, endowing the Fenton reaction with enhanced catalytic activity for rhodamine B (RhB) degradation. The effects of the concentration of CuCDs, temperature, pH, oxygen (O2), metal ions and polymers on the catalytic activity of CuCDs are investigated. It is worth noting that electron transfer happening on the surface of CuCDs plays a vital role in the RhB degradation process. As evidenced by radical scavenger experiments and electron spin resonance (ESR) studies, CuCDs significantly boost the formation of hydroxyl radicals (˙OH) and singlet oxygen (1O2), facilitating the Fenton reaction for RhB degradation. Due to the strong oxidation of ROS generated by the Fe2+ + H2O2 + CuCD system, RhB degradation may involve the cleavage of the chromophore aromatic ring and the de-ethylation process. Additionally, the toxicity of RhB degradation filtrates is assessed in vitro and in vivo. The as-prepared CuCDs may be promising catalytic agents for the enhancement of the Fenton reaction.

Ultrahigh efficient and selective adsorption of U(VI) with amino acids-modified magnetic chitosan biosorbents: Performance and mechanism

Exploiting eco-friendly, highly controlled preparation and convenient solid-liquid separation adsorbent to separate uranium from aquatic medium is of importance and in demand. In this study, magnetic ferroferric oxide nanoparticles synthesized through a facile hydrothermal reaction was cross-linked with chitosan. The intermediate product was subsequently chemically grafting with four amino acids such as alanine, serine, glycine or L-cysteine to produce Ala-MCS, Ser-MCS, Gly-MCS and Cys-MCS. The resultants were verified by SEM, EDS, XRD, VSM, FT-IR and XPS. Adsorption of uranium with amino acids-modified magnetic chitosans were carried out. The parameters that affected the adsorption ability, selectivity toward uranium, and reusability have been illustrated. pH 6.5 was the most beneficial for the adsorption. The saturation adsorption capacity of Ala-MCS, Ser-MCS, Gly-MCS, Cys-MCS were found as 658.88 mg/g ± 1.0 %, 616.10 ± 0.3 % mg/g, 646.38 ± 1.8 % mg/g, 653.96 ± 3.4 % mg/g and 409.15 ± 4.6 % mg/g, respectively. The adsorption process was analyzed using kinetics (pseudo-first-order, pseudo-second-order and intraparticle diffusion models) and isotherms models (Langmuir and Freundlich models). The adsorption of uranium on Ala-MCS, Ser-MCS, Gly-MCS and Cys-MCS happened on monolayer and were controlled by chemisorption. The certified high adsorption amount and efficient solid-liquid separation proved amino acids-modified magnetic chitosan are promising adsorbents for removal of uranium from wastewater.

Sulfhydryl Functionalized Magnetic Chitosan as an Efficient Adsorbent for High-Performance Removal of Cd(II) from Water: Adsorption Isotherms, Kinetic, and Reusability Studies

In this study, dimercaptosuccinic acid-functionalized magnetic chitosan (Fe3O4@CS@DMSA) was synthesized via in situ coprecipitation process and amidation reaction, aiming to eliminate cadmium (Cd(II)) ions from an aqueous environment. The structure, morphology, and particle size of the Fe3O4@CS@DMSA adsorbent were investigated using FTIR, TEM, EDX, TGA, zeta potential, and XRD techniques, and the obtained results approved the successful synthesis of the Fe3O4@CS@DMSA nanocomposite. The influence of external adsorption conditions such as pH solution, adsorbent mass, initial Cd(II) concentration, temperature, and contact time on the adsorption process was successfully achieved. Accordingly, pH: 7.6, contact time: 210 min, and adsorbent mass:10 mg were found to be the optimal conditions for best removal. The adsorption was analyzed using nonlinear isotherm and kinetic models. The outcomes revealed that the adsorption process obeyed the Langmuir and the pseudo-first-order models. The maximum adsorption capacity of Fe3O4@CS@DMSA toward Cd(II) ion was 314.12 mg/g. The adsorption mechanism of Cd(II) on Fe3O4@CS@DMSA nanocomposite is the electrostatic interaction. The reusability test of Fe3O4@CS@DMSA nanocomposite exhibited that the adsorption efficiency was 72% after the 5th cycle. Finally, this research indicates that the Fe3O4@CS@DMSA exhibited excellent characteristics such as high adsorption capacity, effective adsorption-desorption results, and easy magnetic separation and thus could be an effective adsorbent for removing Cd(II) ions from aqueous solutions.

Carboxylate-functionalized dragon fruit peel powder as an effective adsorbent for the removal of Rhodamine B (cationic dye) from aqueous solution: adsorption behavior and mechanism

In this study, we used a simple and low-toxicity chemical treatment to make a carboxylate-functionalized dragon fruit peel powder (CF-DFPP) from dragon fruit peel to improve its capacity for adsorbing Rhodamine B (RhB) from an aqueous medium. Field Emission-Scanning Electron Microscopy/Energy-Dispersive X-ray (FE-SEM/EDX), point of zero charges (pH_PZC), Brunauer-Emmett-Teller (BET), and Fourier Transform Infrared (FT-IR) analyses were performed to characterize the adsorbent materials. The adsorption performance and mechanism for the removal of RhB were examined. The kinetic, isotherm and thermodynamic parameters were employed to evaluate the adsorption mechanism. Compared to other models, the Langmuir isotherm and PSO kinetic models better defined the experimental data. CF-DFPP adsorbent exhibited a maximum adsorption efficiency of 228.7 mg/g at 298 K for RhB adsorption. Thermodynamic analysis revealed that the adsorption of RhB by CF-DFPP was spontaneous (ΔG^o < 0) and exothermic (ΔH^o < 0) nature of the process. Different eluting agents were used in desorption tests, and NaOH was revealed to have greater desorption efficiency (96.8%). Furthermore, regeneration examinations revealed that the biosorbent could effectively retain RhB, even after six adsorption/desorption cycles. These findings demonstrated that the CF-DFPP might be a novel material for removing RhB from an aqueous medium.

Removal of inhibitory furan aldehydes in lignocellulosic hydrolysates via chitosan-chitin nanofiber hybrid hydrogel beads

To obtain fermentable sugars from lignocellulose, various inhibitors, especially furan aldehydes, are usually generated during the pretreatment process. These inhibitors are harmful to subsequent microbial growth and fermentation. In this study, a novel detoxification strategy was proposed to remove 5-hydroxymethylfurfural (HMF) and furfural while retaining glucose and xylose using self-prepared chitosan-chitin nanofiber hybrid hydrogel beads (C-CNBs). After C-CNBs treatment, the removal rates of HMF and furfural from sugarcane bagasse hydrolysates reached 63.1% and 68.4%, while the loss rates of glucose and xylose were only 6.3% and 8.2%, respectively. Two typical industrial strains grew well in monosaccharide-rich detoxified hydrolysates, with a specific growth rate at least 4.1 times that of undetoxified hydrolysates. Furthermore, adsorption mechanism analysis revealed that the Schiff base reaction and mesopore filling were involved in furan aldehyde adsorption. In total, C-CNBs provide an efficient and practical approach for the removal of furan aldehydes from lignocellulosic hydrolysates.

Polypropylene Glycol Modified Chitosan Composite as a Novel Adsorbent to Remove Cu(II) From Wastewater

Pollution by heavy metals has become a problem that needs to be solved urgently. Therefore, the development of new efficient adsorbents to treat this pollution is of great importance. Due to their excellent adsorption properties and good biodegradability, natural polymeric materials are potential problem solvers. This study reports on the production and application of polypropylene glycol modified chitosan composites (PMC). The PMC composite material has many functional groups (–OH and –NH2). Its maximum adsorption capacity for Cu(II) is 661.8 mg g–1. The corresponding adsorption studies, including the effects of pH, contact time and amount of adsorbent, showed that the PMC composite has potential application value.

A novel surface imprinted resin for the selective removal of metal-complexed dyes from aqueous solution in batch experiments: ACB GGN as a representative contaminant

Metal-complexed dyes are harmful to the environment and human health because they contain heavy metals and complex organic ligands. It is difficult to separate and recover these dyes from wastewater owing to their complex components and poor selectivity of common adsorbents. In this study, a novel surface molecularly imprinted polymer (SMIP) was prepared using 4-vinyl pyridine as the functional monomer and polystyrene resin as the carrier. SMIP showed better adsorption performance than non-imprinted polymer (SNIP) in the whole pH range with the best adsorption capacity at pH 1.5. The correlation coefficients (R²) fitted by Langmuir and Temkin models were greater than 0.97, and the adsorption was a spontaneous exothermic process. The pseudo-second-order and Elovich models fitted the adsorption kinetic curves well. The adsorption capacity of SMIP was approximately 20% higher than that of SNIP in the salt concentration ranging from 2 to 80 mg/L. In selective adsorption experiments, the relative selectivity coefficients (I) of SMIP for competitors were all greater than 2.41, and the Cr (Ⅲ) components of ACB GGN played a more important role in the recognition performance of SMIP than the sulfonic groups. Adsorption mechanism tests revealed that although the adsorption of ACB GGN by SMIP mainly relied on electrostatic attraction, hydrophobic interactions, π-π conjugation, and Cr (Ⅲ) coordination were also involved. These results show that SMIP has excellent selective adsorption properties for ACB GGN and a promising application potential in the treatment of metal-complexed dye wastewater.

Starch-based magnetic nanocomposite as an efficient absorbent for anticancer drug removal from aqueous solution

In this study, carboxymethyl cassava starch (CMCS)-functionalized magnetic nanoparticles (CMCS@Fe₃O₄) were synthesized via a simple one-pot co-precipitation method using CMCS materials with varying degrees of substitution, and used for the adsorption/removal of doxorubicin hydrochloride (Dox; a clinically available anti-cancer drug) from aqueous solution. The adsorption of Dox was studied using experimental conditions with varied pH, temperature, initial Dox concentration, and CMCS@Fe₃O₄ dosage. The CMCS@Fe₃O₄ adsorbents were characterized by scanning electron microscopy, transmission electron microscopy, infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, and vibrating sample magnetometry. Each CMCS@Fe₃O₄ adsorbent exhibited a cubic inverse spinel iron oxide phase, small particle size, favorable magnetic properties, and good thermal stability. Batch adsorption experiments showed that the Dox adsorption efficiency reached 85.46% at a CMCS@Fe₃O₄ concentration of 20 mg mL^-1 at 303 K in pH 7.0. The adsorption experimental results indicated that the adsorption kinetics followed a pseudo-second-order model and the Langmuir equation. Considering the environmentally nontoxic nature of Fe₃O₄ and starch, the CMCS@Fe₃O₄ material demonstrated significant potential for removing Dox from aqueous solution and in magnetic targeted drug delivery systems for synergistic tumor treatments.