Transglutaminase crosslinking promotes physical and oxidative stability of filled hydrogel particles based on biopolymer phase separation

Integrated strategies for efficient production of Streptomyces mobaraensis transglutaminase in Komagataella phaffii

Transglutaminase (TGase) from Streptomyces mobaraensis commonly used to improve protein-based foods due to its unique enzymatic reactions, which imply considerable attention in its production. Recently, TGase exhibit broad market potential in non-food industries. However, achieving efficient synthesis of TGase remains a significant challenge. Herein, we achieved a substantial amount of a fully functional and kinetically stable TGase produced by Komagataella phaffii (Pichia pastoris) using multiple strategies including Geneticin (G418) screening, combinatorial mutations, promoter optimization, and co-expression. The active TGase expression reached a maximum of 10.1 U mL-1 in shake flask upon 96 h of induction, which was 3.8-fold of the wild type. Also, the engineered strain exhibited a 6.4-fold increase in half-life and a 2-fold increase in specific activity, reaching 172.67 min at 60 °C (t1/2(60 °C)) and 65.3 U mg-1, respectively. Moreover, the high-cell density cultivation in 5-L fermenter was also applied to test the productivity at large scale. Following optimization at a fermenter, the secretory yield of TGase reached 47.96 U mL-1 in the culture supernatant. Given the complexity inherent in protein expression and secretion, our research is of great significance and offers a comprehensive guide for improving the production of a wide range of heterologous proteins.

Effects of myofibril-palatinose conjugate as a phosphate substitute on meat emulsion quality

The objective of this study was to investigate a replacement for phosphate in meat products. Protein structural modification was employed in this study, and grafted myofibrillar protein (MP) with palatinose was added to meat emulsion without phosphate. Here, 0.15% of sodium polyphosphate (SPP) was replaced by the same (0.15%) concentration and double (0.3%) the concentration of grafted MP. Although the thermal stability was decreased, the addition of transglutaminase could increase stability. The rheological properties and pH also increased with the addition of grafted MP and transglutaminase. The addition of grafted protein could be perceived by the naked eye by observing a color difference before cooking, but it was not easy to detect after cooking. The cooking loss, emulsion stability, water holding capacity, lipid oxidation, and textural properties improved with the addition of grafted MP. However, the excessive addition of grafted MP and transglutaminase was not recommended to produce a high quality of phosphate replaced meat emulsion, and 0.15% was identified as a suitable addition ratio of grafted MP.

Chaperonin co-expression and chemical modification enables production of active microbial transglutaminase from E. coli cytoplasm

Microbial transglutaminase (MTG) is a usable enzyme for biomacromolecule modification. In the present study, a "molecular chaperonin" strategy was developed to produce MTG in E. coli cytoplasm with high expression level and a "small molecule-mediated chemical modification" strategy was adopted to strip propeptide chaperonin efficiently during purification. Propeptide (Pro) was expressed separately as a chaperonin to facilitate MTG expression in E. coli cytoplasm with a yield up to 300 mg or about 9 kU from 1 L fed-batch culture. Furthermore, small molecular chemicals were applied to interfere the interaction between MTG and Pro. Chemical acetylation was identified as a suitable method to strip Pro resulting in pure MTG with high specific activity up to 49.6 U/mg. The purified acetylated MTG was characterized by MS analysis. The deconvoluted mass and Peptide Sequence Tags analysis confirmed acetylation on amino groups of MTG protein. Finally, the applications of obtained MTG were demonstrated via protein polymerization of bovine serum albumin and PEGylation of human interferon-α2b. Our method provides MTG with high purity and specific activity as well as unique merit with masked amino groups thus avoiding self-polymerization and cross-linking between MTG and substrates.

Effect of heat treatment on the physical stability, interfacial composition and protein-lipid co-oxidation of whey protein isolate-stabilised O/W emulsions

This work aimed to investigate the effects of heat treatments at different temperatures (60, 70 and 90 °C, expressed as HT-60, HT-70 and HT-90) on interfacial composition and protein-lipid co-oxidation in whey protein isolate (WPI)-stabilised O/W emulsions during storage. Compared with control group, all heated emulsions exhibited weaker physical stability over 10 days of storage, which verified by the increased droplet size, as well as decreased adsorbed protein levels and absolute ζ-potential values. Moreover, proteins recovered from the HT-90 emulsion showed the highest fluorescence intensity and red-shift of the maximum emission wavelength, indicating partial unfolding of the protein structure. Meanwhile, severe changes in protein structure were also observed in the HT-70 and HT-90 emulsions, which clearly verified by the degradation of bovine serum albumin, α-lactalbumin and β-lactoglobulin. Furthermore, HT-70 and HT-90 emulsions showed lower levels of lipid hydroperoxides and thiobarbituric acid reactive substances. In contrast, the recovered proteins were subject to severe oxidative stress as indicated by carbonyl and N'-formyl-L-kynurenine. Hierarchical cluster and correlation analysis implied that the process of protein-lipid co-oxidation is inevitable, but it can be retarded by heat treatment. Our results clearly revealed the relevance among heat treatment, interfacial adsorption property, and the protein-lipid co-oxidation of O/W emulsions.

Enzymatically-Crosslinked Gelatin Hydrogels with Nanostructured Architecture and Self-Healing Performance for Potential Use as Wound Dressings

Development of natural protein-based hydrogels with self-healing performance and tunable physical properties has attracted increased attention owing to their wide potential not only in the pharmaceutical field, but also in wounds management. This work reports the development of a versatile hydrogel based on enzymatically-crosslinked gelatin and nanogels loaded with amoxicillin (Amox), an antibiotic used in wound infections. The transglutaminase (TGase)-crosslinked hydrogels and encapsulating nanogels were formed rapidly through enzymatic crosslinking and self-assembly interactions in mild conditions. The nanogels formed through the self-assemble of maleoyl-chitosan (MAC5) and polyaspartic acid (PAS) may have positive influence on the self-healing capacity and drug distribution within the hydrogel network through the interactions established between gelatin and gel-like nanocarriers. The physicochemical properties of the enzymatically-crosslinked hydrogels, such as internal structure, swelling and degradation behavior, were studied. In addition, the Amox release studies indicated a rapid release when the pH of the medium decreased, which represents a favorable characteristic for use in the healing of infected wounds. It was further observed through the in vitro and in vivo biocompatibility assays that the optimized scaffolds have great potential to be used as wound dressings.

Impact of different ionic strengths on protein-lipid co-oxidation in whey protein isolate-stabilized oil-in-water emulsions

Protein-lipid co-oxidation of whey protein isolate (WPI)-stabilized oil-in-water (O/W) emulsions with different ionic strengths (0, 100, 200, 300 and 400 mM) during storage were investigated. The results proved that changes in levels of adsorbed proteins induced by different ionic strengths could obviously affect the occurrence of protein-lipid co-oxidation. The level of oxidative stress was higher in adsorbed proteins extracted from control sample than in those extracted from emulsions with 300 or 400 mM ionic strengths. This was indicated by higher levels of N'-formyl-l-kynurenine (NFK) and carbonyl, lower fluorescence intensity and more serious unfolding of protein structure. Moreover, control sample showed the highest oxidative stability, which was indicated by lower levels of primary and secondary lipid oxidation products. These findings clearly illustrated that altered levels of adsorbed proteins induced by different ionic strengths play a crucial role in affecting protein-lipid co-oxidation in O/W emulsions.

Effects of the Incorporation of Calcium Chloride on the Physical and Oxidative Stability of Filled Hydrogel Particles

In this study, the effects of calcium chloride (CaCl2) addition on the physical and oxidative stabilities of filled hydrogel were investigated. The results revealed that CaCl2 significantly enhanced the particle size, interfacial layer thickness, apparent viscosity, and viscoelastic behavior of filled hydrogels and decreased their light and whiteness values (p < 0.05). This phenomenon was mainly attributed to the strong binding ability between Ca2+ and protein/pectin mixtures, which were present in the interfacial area or aqueous phase, as verified by cryo-scanning electron microscopy results. Moreover, lower levels of CaCl2 (2 or 4 mM) significantly enhanced the oxidative stability of filled hydrogels (p < 0.05), particularly at a concentration of 4 mM. However, a higher level of CaCl2 (6 or 8 mM) resulted in an electrostatic shielding effect, which resulted in the aggregation of multiple droplets and the flocculation of the filled hydrogels, which negatively affected the oxidative stability of filled hydrogels. The findings of this study indicated that appropriate Ca2+ levels (4 mM) improved the physical and oxidative stability of filled hydrogel, and this finding may provide useful insights for the development of effective delivery systems for specific applications.

Effects of acetylated cassava starch on the physical and rheological properties of multicomponent protein emulsions

The present study investigates the effect of different acetylated cassava starch (ACS) concentrations on the physical and rheological properties of multicomponent emulsion-based products at specific pH values. The emulsion-based products were made by mixing 2% (w/v) prepared lipid droplets that were stabilized by either native or heated whey proteins, 0.01% (w/v) flaxseed gum and 0-6.0% (w/v) ACS. The results indicated that particle size, apparent viscosity and rheological moduli of multicomponent emulsion-based products were significantly enhanced with increasing addition amounts of ACS (P < 0.05). Moreover, the microscopic morphology showed that the addition of ACS contributed to the formation of a more compact, uniform, and continuous comb-like network. However, higher ACS concentration was prone to induce visibly larger aggregations and coarser textures, lending to some negative impact on visual appearance and overall acceptability. Moreover, acidic conditions could obviously promote droplet aggregation via electrostatic interactions, whereas neutral conditions had no effect on droplet aggregation. Additionally, when compared with native whey proteins, lipid droplets stabilized by their heated protein forms induced significantly higher apparent viscosities and rheological moduli of multicomponent emulsion-based products (P < 0.05). Our results potentially provide some information for the creation of multicomponent emulsion-based products with various desirable quality attributes.

Effects of Sodium Chloride on the Physical and Oxidative Stability of Filled Hydrogel Particles Fabricated with Phase Separation Behavior

The objective of this study was to investigate the influence of sodium chloride (NaCl) concentration (0-500 mM) on the physical and oxidative stabilities of filled hydrogel that were stabilized using heat-denatured whey protein concentrate and high methoxy pectin. Our results showed that with an increase in NaCl concentration, the particle sizes, zeta-potentials, and interfacial layer thickness of filled hydrogels significantly increased and the lightness and whiteness gradually decreased (p < 0.05). Moreover, rheological characterization revealed that the apparent viscosity and viscoelastic behavior gradually decreased at higher NaCl concentration, which was mainly ascribed to the influence of NaCl on the electrostatic repulsion between droplets, thereby adversely impacting the physical stability of filled hydrogels. Furthermore, the result of cryo-scanning electron microscopy also verified the abovementioned results. Notably, higher NaCl concentration significantly promoted the oxidation of lipids and proteins (p < 0.05), thereby decreasing the oxidative stabilities of filled hydrogels. Our results indicated that filled hydrogels prepared under different ionic strength conditions can provide the theoretical basis for their future application in emulsion-based foods.