Comparison of functional properties of porous starches produced with different enzyme combinations

Porous corn starch granules as effective host matrices for encapsulation and sustained release of curcumin and resveratrol

Type 2 Diabetes Mellitus (T2DM) is a carbohydrate-rich diet-regulated ailment with carbohydrates digested and absorbed rapidly. Hence, modulating carbohydrate digestion is warranted; to this end, polyphenols from plant sources are handy. However, polyphenols' instability and low bioavailability limit their wholesome use, and thus, encapsulating them into an inexpensive and suitable wall material would be the best strategy. Herein, the potential of porous starch granules is demonstrated. Curcumin and resveratrol were chosen as the test polyphenols due to their proven health benefits, and porous corn starch granules were chosen as the wall material. Porous corn starch granules were prepared through enzymatic modification with 11, 22, and 33 units of amyloglucosidase at three reaction times of 2, 4, and 6 h. The polyphenols were loaded at 100, 200, and 500 mg concentrations in 1 g of starch for 21 days and were characterized through Scanning Electron Microscope (SEM) and Fourier Transform Infrared spectroscopy (FTIR) analyses. The encapsulation efficiency was determined, the rate of starch digestion was calculated through the Englyst test, and polyphenols' in vitro release behavior in gastric and intestinal fluids was measured. Results suggest that 33 enzyme units for a 2 h reaction time were optimal for forming spherical-oval pores on corn starch granules with the maximum encapsulation efficiency of 80.16 % and 88.33 % for curcumin and resveratrol, respectively. The FTIR results suggest the entrapment of polyphenols inside the starch matrix. The inclusion significantly reduced starch digestion and increased the percentage of resistant starch up to 41.11 % and 66.36 % with curcumin and resveratrol, respectively. The in vitro release behavior demonstrated good stability in the simulated gastric fluids and sustained release in simulated intestinal fluids. The encapsulated polyphenols showed a complex Fickian type of diffusion mechanism. Overall, the results suggest that porous corn starch granules could be a potential delivery system for curcumin and resveratrol and will aid in developing novel functional foods to address the T2DM concerns.

Effect of atmospheric pressure plasma jet on the structure and physicochemical properties of wheat starch

The effect of atmospheric pressure plasma jet (APPJ) with different discharge power (0, 400, 600, and 800 W) on the structure and physicochemical properties of wheat starch were evaluated in this study. After APPJ treatments, significant declines in peak viscosity, breakdown viscosity, and final viscosity of wheat starch pasting parameters were observed with increase of plasma treatment power. Being treated with discharge power of 800 W, the PV and BD value of wheat starch paste significantly dropped to 2,578 and 331 cP, respectively. Apparently, APPJ could raise the solubility of wheat starch, while reduce the swelling capacity, and also lower the G' and G″ value of wheat starch gel. Roughness and apparent scratch was observed on the surface of the treated wheat starch granules. Although APPJ treatment did not alter wheat starch's crystallization type, it abated the relative crystallinity. APPJ treatment might be useful in producing modified wheat starch with lower viscosity and higher solubility.

Potential use of Thai mango (Mangifera indica Linn. cultivar Chok-Anan) seed porous starch for retention of aroma compounds from coffee extract

This study aimed to extract and modify the properties of the starch from Thai mango seeds (cultivar Chok-Anan). The porous starch samples were obtained using enzymatic treatment and its potential to retain aroma compounds from coffee extract was evaluated. The physicochemical properties, structure characteristics, porosity characteristics and adsorption quantity of starches were also determined. The retention of coffee aroma compounds was investigated through combining starch or porous starch with odorants, and storing the mixtures at room temperature for 7 and 14 days, respectively. The chemical properties of aroma compounds as well as starch surface properties were observed to affect the retention of aroma compounds upon storage. Additionally, 2-furanmethanol, d-limonene and maltol were selected to be the primary target compounds to assess the retention of odorants. This study observed a noticeable decrease in d-limonene content throughout the storage period. On the contrary, after 14 days of storage, the porous starch exhibited high retention of hydroxy compounds including 2-furanmethanol and maltol. However, after prolonged storage their ability to retain 2-furanmethanol and maltol slightly decreased. Therefore, the porous starch derived from mango seeds exhibited the potential to retain coffee aroma compounds and could be a desirable green adsorbent for food and cosmetic industries.

Formation, influencing factors, and applications of internal channels in starch: A review

Starch, a natural polymer, has a complex internal structure. Some starches, such as corn and wheat starches, have well-developed surface pores and internal channels. These channel structures are considered crucial in connecting surface stomata and internal cavities and have adequate space for loading guest molecules. After processing or modification, the starch-containing channel structures can be used for food and drug encapsulation and delivery. This article reviews the formation and determination of starch internal channels, and the influence of different factors (such as starch species and processing conditions) on the channel structure. It also discusses relevant starch preparation methods (physical, chemical, enzymatic, and synergistic), and the encapsulation effect of starch containing internal channels on different substances. In addition, the role of internal channels in regulating the starch digestion rate and other aspects is also discussed here. This review highlights the significant multifunctional applications of starch with a channel structure.

Expanded porous-starch matrix as an alternative to porous starch granule: Present status, challenges, and future prospects

Exposing the hydrated-soft-starch matrix of intact grain or reconstituted flour dough to a high-temperature-short-time (HTST) leads to rapid vapor generation that facilitates high-pressure build-up in its elastic matrix linked to large deformation and expansion. The expanded starch matrix at high temperatures dries up quickly by flash vaporization of water, which causes loss of its structural flexibility and imparts a porous and rigid structure of the expanded porous starch matrix (EPSM). EPSM, with abundant pores in its construction, offers adsorptive effectiveness, solubility, swelling ability, mechanical strength, and thermal stability. It can be a sustainable and easy-to-construct alternative to porous starch (PS) in food and pharmaceutical applications. This review is a comparative study of PS and EPSM on their preparation methods, structure, and physicochemical properties, finding compatibility and addressing challenges in recommending EPSM as an alternative to PS in adsorbing, dispersing, stabilizing, and delivering active ingredients in a controlled and efficient way.

Oil structuring from porous starch to powdered oil: Role of multi-scale structure in the oil adsorption and distribution

Oil structuring from porous starch is a potential alternative for the industrial production of powdered oil, but their relationship between starch multi-scale structure and oil adsorption characteristics was not clear. This study compared the role of multi-scale structure of porous starch (PS) prepared by normal and waxy maize starch in the oil adsorption. Waxy maize porous starch exhibited higher oil adsorption capacity (32.43 %-98.71 %) and more oil distributed on the surface of granules than normal maize porous starch, resulting from the more pores, larger specific surface area (1.01-1.53 m2/g), and pore size (8.45-9.32 nm). The enzymolysis time of native starch dominated oil distribution, leading to different granule adhesion and aggregation state. Pearson correlation analysis further showed oil adsorption capacity was negatively correlated with particle size, but positively correlated with enzymolysis rate and specific surface area of PS. The formation of powdered oil was mainly through the physical adsorption, including surface adsorption and pore adsorption. These findings could provide a promising route for the preparation of powdered oil with controlled multi-scale structure of PS.

Adsorption properties of corn starch modified by malt amylases and crosslinking agents: A comparison between sodium trimetaphosphate and organic acids

In order to investigate the effects of different crosslinking agents on physicochemical properties and adsorption properties of porous starch. Native corn starch was hydrolyzed by maltase and crosslinked with different crosslinking agents. Sodium trimetaphosphate crosslinked porous starch (STMP-MPS), malic acid cross-linked porous starch (MA-MPS) and citric acid cross-linked porous starch (CA-MPS) were prepared. After crosslinking, MA-MPS and CA-MPS showed a new CO stretching absorption peak at 1738 cm-1, and the crosslinking degree was much higher than that of STMP-MPS. The surface area of MA-MPS was 36 % higher than that of STMP-MPS. Compared with the average pore size of 12.43 nm of STMP-MPS, CA-MPS (14.02 nm) and MA-MPS (14.79 nm) were increased more significantly. The degradation temperature of MA-MPS and CA-MPS was increased by the introduction of ester bond, which indicates that the organic acid cross-linking strengthens the starch granules and hence more energy is required for disruption. Compared with STMP-MPS, the water absorption of MA-MPS and CA-MPS increased by 64 % and 32 %, respectively. Furthermore, the adsorption capacity of MA-MPS to essential oil was the strongest, about 4 times that of STMP-MPS. Overall, it is feasible to modify porous starch by crosslinking reaction to improve its heat resistance and adsorption properties.

Hydrothermal processes and simultaneous enzymatic hydrolysis in the production of modified cassava starches with porous-surfaces

The amylolytic action of α-amylase and amyloglucosidase has been directly implemented in native cassava starches for the formation of cassava microporous granules with unsatisfactory results, however, its incidence in hydrothermally treated granules has never been evaluated. The effect of hydrothermal processes and simultaneous enzymatic hydrolysis on the physicochemical, morphological and structural properties of native cassava starch was evaluated. Native cassava starch presented a rigid, smooth surface, and was exempt from porosities, whereas hydrothermal processes altered the semicrystalline order and increasing the size and number of pores and increasing the size (4.11 ± 0.09 nm) and volume of pores (0.82 ± 0.00 cm3/g × 10-3). The hydrothermal action followed by enzymatic processes with α-amylase and amyloglucosidase, augmented the processes of internal degradation (endo-erosion) and pore widening (exo-erosion), improving the hydrophilic properties compared to the hydrothermal treatment. Likewise, the hydrothermally process followed by enzymatic hydrolysis for 24 h (HPS + EMS-24) increased the degradation of the amorphous lamellae, consistent with a significant decrease in amylose content. This same dual treatment increased the pore size at 17.68 ± 0.13 nm relative to the native counterpart; therefore, they are considered an effective method in the development of modified cassava starches with porous surfaces.

Ultrasonic Treatment of Corn Starch to Improve the Freeze-Thaw Resistance of Frozen Model Dough and Its Application in Steamed Buns

Modification of corn starch using ultrasonic waves to improve its freeze-thaw resistance in frozen model doughs and buns. Analysis was performed by rheometry, low-field-intensity nuclear magnetic resonance imaging, Fourier infrared spectroscopy, and scanning electron microscopy. The results showed that the addition of ultrasonically modified corn starch reduced the migration of water molecules inside the model dough, weakened the decrease of elastic modulus, and enhanced the creep recovery effect; the decrease in α-helical and β-fold content in the model dough was reduced, the destruction of internal network structure was decreased, the exposed starch granules were reduced, and the internal interaction of the dough was enhanced; the texture of the buns became softer and the moisture content increased. In conclusion, ultrasound as a physical modification means can significantly improve the freeze-thaw properties of corn starch, providing new ideas for the development and quality improvement of corn-starch-based instant frozen pasta products.

Effects of high-speed shear and double-enzymatic hydrolysis on the structural and physicochemical properties of rice porous starch

This study aimed to investigate the physicochemical properties of the rice porous starch (HSS-ES) prepared by high-speed shear combined with double-enzymatic (α-amylase and glucoamylase) hydrolysis, and to reveal their mechanism. The analyses of ¹H NMR and amylose content showed that high-speed shear changed the molecular structure of starch and increased the amylose content (up to 20.42 ± 0.04 %). FTIR, XRD and SAXS spectra indicated that high-speed shear did not change the starch crystal configuration but caused a decrease in short-range molecular order and relative crystallinity (24.42 ± 0.06 %), and a loose semi-crystalline lamellar, which were beneficial to the followed double-enzymatic hydrolysis. Therefore, the HSS-ES displayed a superior porous structure and larger specific surface area (2.962 ± 0.002 m²/g) compared with double-enzymatic hydrolyzed porous starch (ES), resulting in the increase of water and oil absorption from 130.79 ± 0.50 % and 109.63 ± 0.71 % to 154.79 ± 1.14 % and 138.40 ± 1.18 %, respectively. In vitro digestion analysis showed that the HSS-ES had good digestive resistance derived from the higher content of slowly digestible and resistant starch. The present study suggested that high-speed shear as an enzymatic hydrolysis pretreatment significantly enhanced the pore formation of rice starch.

Preparation and characterization of low oil absorption corn starch by ultrasonic combined with freeze–thaw treatment

•

Combined ultrasonic and freeze–thaw pretreatment significantly reduced oil absorption of corn starch.

•

The combined treatment increased the density of corn starch granules.

•

The combined treatment increased the short-range order of cornstarch.

•

Modified starch could be used in low-fat fried food processing industry.

This study investigated the effects of ultrasonic, freeze–thaw, and combined pretreatments on corn starch oil absorption. Low-field nuclear magnetic resonance (LF NMR) was used to study the oil absorption changes after frying of corn starch (CS) subjected to different treatments. The structural characteristics of samples were evaluated using various techniques. Scanning electron microscopy, contact angle, and particle size analysis showed that corn starch subjected to combined ultrasonic and freeze–thaw treatment generated larger, coarser particles with a denser structure. Furthermore, X-ray diffraction, Fourier transform infrared spectroscopy, and differential scanning calorimetry showed that combined treatment improved the order and thermal stability of CS molecules, thereby inhibiting oil absorption during frying. The results showed that combined ultrasonic and freeze–thaw pretreatment significantly reduced the oil absorption of corn starch before and after frying.

Impact of Cassava Starch Varieties on the Physiochemical Change during Enzymatic Hydrolysis

The enzymatic modification of starch extends its industrial use to flavor delivery and probiotic encapsulants, among other uses. However, it is not known how starch from different cassava varieties responds to enzymatic hydrolysis. Starches from two Ecuadorian cassava varieties (INIAP 650, an edible starch, and INIAP 651, an industrial starch) were partially modified at three enzymatic hydrolysis degrees (0%, 30%, and 50%), and their physicochemical properties were assessed. The structural analysis revealed that both varieties showed progressive structural damage as hydrolysis increases, probably due to exo-hydrolysis. However, deeper pores were observed in INIAP 651 with the SEM analysis. The crystallinity percentage obtained by XRD analyses remained constant in INIAP 651 and decreased (by 26%) in INIAP 650 (p < 0.05). In addition, the amylose−lipid complex index in INIAP 650 remained constant, while INIAP 651 increased (p < 0.05) at 30% hydrolysis (by 93%). In both varieties, hydrolysis increased (p < 0.05) the water holding capacity (WHC) (by 10−14%) and the water binding capacity (WBC) (by 16%), but 50% hydrolysis of INIAP 650 was needed to significantly affect these properties. No differences were observed in the varieties’ thermal properties. Regarding the rheological properties, the variety did not influence the changes in the storage module (G′) and the loss modulus (G″) with the hydrolysis (p > 0.05). However, the phase angle decreased significantly (p < 0.05) with the hydrolysis, being higher in the INIAP 650 variety than in the INIAP 651 variety. In general, the results indicate that the variety affects the response of the starch granule to enzymatic hydrolysis (noticeable in the principal component analysis, PCA) and opens up the possibility to modulate starch properties.

Properties and digestibility of a novel porous starch from lotus seed prepared via synergistic enzymatic treatment

The objective was to investigate the effect of synergistic enzymatic treatment on the properties and digestibility of a novel C-type lotus seed porous starch (LPS). Scanning electron microscopy showed that the densest and most complete pores were formed on the surface of LPS when the concentration of enzymes added was 1.5% (LS-1.5E). With increases in enzyme addition, the oil and water absorption of the porous starch increased and reached maxima at 1.5% of enzyme. Increased in the specific surface area, total pore volume and average pore diameter of LPS were determined by low-temperature nitrogen adsorption, while when the enzymes exceeded 1.5%, there were no significant changes. Compared to lotus seed starch (LS), the particle size of LPS also decreased. With the increases in enzyme addition, LPS exhibited higher relative crystallinity and ordering structure by XRD and FTIR. The results by SAXS confirmed that LPS had higher ordered semi-crystalline lamellar and denser lamellar structure compared to LS. Low-field ¹H NMR spectroscopy indicated that the proportion of bound water in LPS increased, while the proportion of bulk water decreased. Moreover, the degree of hydrolysis of LPS was lower than that of LS, and the content of rapidly digestible starch decreased, while the content of slowly digestible starch and resistant starch increased with the enzyme addition, which was consistent with the structural properties.